[ Upstream commit 70ca8caa96 ]
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ede902062 ]
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2259d14499 ]
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4b2243cb ]
There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]
> I guess if private means fs->users == 1, the condition could still be true.
Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).
We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but... current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.
They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts. The last part is clearly a bug.
There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place". Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.
Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything. That
seriously simplifies the analysis...
FWIW, that bug had been there since the introduction of unshare(2) ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb3c20688 ]
On Star Labs StarFighter (Realtek ALC233/235), the internal speakers can
emit an audible pop when entering or leaving runtime suspend.
Mute the speaker output paths via snd_hda_gen_shutup_speakers() in the
Realtek shutup callback before the codec is powered down.
This is enough to avoid the pop without special EAPD handling.
Test results:
- runtime PM pop fixed
- still reaches D3 (PCI 0000:00:1f.3 power_state=D3hot)
- does not address pops on cold boot (G3 exit) or around display manager
start/shutdown
journalctl -k (boot):
- snd_hda_codec_alc269 hdaudioC0D0: ALC233: picked fixup for PCI SSID
7017:2014
- snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC233: line_outs=1
(0x1b/0x0/0x0/0x0/0x0) type:speaker
Suggested-by: Takashi Iwai <tiwai@suse.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96392ebe ]
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb184dd191 ]
syzbot reported a uninit-value bug in [1].
Similar to the "*get" context where the kernel's internal file_kattr
structure is initialized before calling vfs_fileattr_get(), we should
use the same mechanism when using fa.
[1]
BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
vfs_fileattr_get fs/file_attr.c:94 [inline]
__do_sys_file_getattr fs/file_attr.c:416 [inline]
Local variable fa.i created at:
__do_sys_file_getattr fs/file_attr.c:380 [inline]
__se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372
Reported-by: syzbot+7c31755f2cea07838b0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7c31755f2cea07838b0c
Tested-by: syzbot+7c31755f2cea07838b0c@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://patch.msgid.link/tencent_B6C4583771D76766D71362A368696EC3B605@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b31376005 ]
Ensures that UFS Runtime PM can achieve power saving after System PM
suspend by resetting hba->urgent_bkops_lvl. Also modify the
ufshcd_bkops_exception_event_handler to avoid setting urgent_bkops_lvl when
status is 0, which helps maintain optimal power management.
On UFS devices supporting UFSHCD_CAP_AUTO_BKOPS_SUSPEND, a BKOPS exception
event can lead to a situation where UFS Runtime PM can't enter low-power
mode states even after the BKOPS exception has been resolved.
BKOPS exception with bkops status 0 occurs, the driver logs:
"ufshcd_bkops_exception_event_handler: device raised urgent BKOPS exception for bkops status 0"
When a BKOPS exception occurs, ufshcd_bkops_exception_event_handler() reads
the BKOPS status and sets hba->urgent_bkops_lvl to BKOPS_STATUS_NO_OP(0).
This allows the device to perform Runtime PM without changing the UFS power
mode. (__ufshcd_wl_suspend(hba, UFS_RUNTIME_PM))
During system PM suspend, ufshcd_disable_auto_bkops() is called, disabling
auto bkops. After UFS System PM Resume, when runtime PM attempts to suspend
again, ufshcd_urgent_bkops() is invoked. Since hba->urgent_bkops_lvl
remains at BKOPS_STATUS_NO_OP(0), ufshcd_enable_auto_bkops() is triggered.
However, in ufshcd_bkops_ctrl(), the driver compares the current BKOPS
status with hba->urgent_bkops_lvl, and only enables auto bkops if
curr_status >= hba->urgent_bkops_lvl. Since both values are 0, the
condition is met
As a result, __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM) skips power mode
transitions and remains in an active state, preventing power saving even
though no urgent BKOPS condition exists.
Signed-off-by: Won Jung <wone.jung@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/1891546521.01770806581968.JavaMail.epsvc@epcpadp2new
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023cd6d90f ]
[821d6f0359] prevented machines
produced later than 2012 from saving NVS region to accelerate S3.
Despite being made after 2012, Lenovo G70-35 still needs NVS memory
saving during S3. A quirk is introduced for this platform.
Signed-off-by: Piotr Mazek <pmazek@outlook.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/GV2PPF3CD5B63CC2442EE3F76F8443EAD90D499A@GV2PPF3CD5B63CC.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260312200326.246396673@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aac9b27f7c upstream.
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.)
Reported-by: syzbot+bcaf842a1e8ead8dfb89@syzkaller.appspotmail.com
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e135b8aee upstream.
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction.
Fixes: c961ee5f21 ("apparmor: convert from securityfs to apparmorfs for policy ns files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b7091c4d upstream.
There is a race condition that leads to a use-after-free situation:
because the rawdata inodes are not refcounted, an attacker can start
open()ing one of the rawdata files, and at the same time remove the
last reference to this rawdata (by removing the corresponding profile,
for example), which frees its struct aa_loaddata; as a result, when
seq_rawdata_open() is reached, i_private is a dangling pointer and
freed memory is accessed.
The rawdata inodes weren't refcounted to avoid a circular refcount and
were supposed to be held by the profile rawdata reference. However
during profile removal there is a window where the vfs and profile
destruction race, resulting in the use after free.
Fix this by moving to a double refcount scheme. Where the profile
refcount on rawdata is used to break the circular dependency. Allowing
for freeing of the rawdata once all inode references to the rawdata
are put.
Fixes: 5d5182cae4 ("apparmor: move to per loaddata files, instead of replicating in profiles")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Maxime Bélair <maxime.belair@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39440b1375 upstream.
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked.
Fixes: 031dcc8f4e ("apparmor: dfa add support for state differential encoding")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6601e13e82 upstream.
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check.
Fixes: b7fd2c0340 ("apparmor: add per policy ns .load, .replace, .remove interface files")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df0c44e8f upstream.
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
Fixes: 145a0ef21c ("apparmor: fix blob compression when ns is forced on a policy load
")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3060394149 upstream.
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab09264660 upstream.
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion.
Fixes: c88d4c7b04 ("AppArmor: core policy routines")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e38c55d9f8 upstream.
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient.
Fixes: dd51c84857 ("apparmor: provide base for multiple profiles to be replaced at once")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9063d7e261 upstream.
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue.
Fixes: ad5ff3db53 ("AppArmor: Add ability to load extended policy")
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11cb63b0d1 upstream.
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Fixes: 3f14b377d0 ("net/sched: act_ct: fix skb leak and crash on ooo frags")
CC: stable@vger.kernel.org
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260225134349.1287037-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62413a9c3c upstream.
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged.
Fixes: a51c328df3 ("net: qos: introduce a gate control flow action")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260223150512.2251594-2-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dileep malepu <dileep.debian@gmail.com>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024cea2d64 ]
The reg_bounds_crafted tests validate the verifier's range analysis
logic. They focus on the actual ranges and thus ignore the tnum. As a
consequence, they carry the assumption that the tested cases can be
reproduced in userspace without using the tnum information.
Unfortunately, the previous change the refinement logic breaks that
assumption for one test case:
(u64)2147483648 (u32)<op> [4294967294; 0x100000000]
The tested bytecode is shown below. Without our previous improvement, on
the false branch of the condition, R7 is only known to have u64 range
[0xfffffffe; 0x100000000]. With our improvement, and using the tnum
information, we can deduce that R7 equals 0x100000000.
19: (bc) w0 = w6 ; R6=0x80000000
20: (bc) w0 = w7 ; R7=scalar(smin=umin=0xfffffffe,smax=umax=0x100000000,smin32=-2,smax32=0,var_off=(0x0; 0x1ffffffff))
21: (be) if w6 <= w7 goto pc+3 ; R6=0x80000000 R7=0x100000000
R7's tnum is (0; 0x1ffffffff). On the false branch, regs_refine_cond_op
refines R7's u32 range to [0; 0x7fffffff]. Then, __reg32_deduce_bounds
refines the s32 range to 0 using u32 and finally also sets u32=0.
From this, __reg_bound_offset improves the tnum to (0; 0x100000000).
Finally, our previous patch uses this new tnum to deduce that it only
intersect with u64=[0xfffffffe; 0x100000000] in a single value:
0x100000000.
Because the verifier uses the tnum to reach this constant value, the
selftest is unable to reproduce it by only simulating ranges. The
solution implemented in this patch is to change the test case such that
there is more than one overlap value between u64 and the tnum. The max.
u64 value is thus changed from 0x100000000 to 0x300000000.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/50641c6a7ef39520595dcafa605692427c1006ec.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2658a1720a ]
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 457965c13f ]
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc2 ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d87c828daa ]
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d ("kselftest/arm64: Add SVE 2.1 to hwcap test")
Signed-off-by: Yifan Wu <wuyifan50@huawei.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0e6e69a7 ]
If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI
command for any QC, the variable qc will hold a pointer to the last element
examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the
port deferred QC (ap->deferred_qc).
If that happens, the condition qc == ap->deferred_qc evaluates to true
despite the loop not breaking with a match on the SCSI command for this QC.
In that case, the error handler mistakenly intercepts a command that has
not been issued yet and that has not timed out, and thus erroneously
returning a timeout error.
Fix the problem by checking for i < ATA_MAX_QUEUE in addition to
qc == ap->deferred_qc.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: eddb98ad93 ("ata: libata-eh: correctly handle deferred qc timeouts")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[cassel: modified commit log as suggested by Damien]
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e18abf18 ]
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c69d22c6c4 ]
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f497dc8a6 ]
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16394d8053 ]
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b6b7f7b2 ]
The current formula for calculating XDP tailroom in mbuf packets works only
if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this
defeats the purpose of the parameter overall and without any indication
leads to negative calculated tailroom on at least half of frags, if shared
pages are used.
There are not many drivers that set rxq->frag_size. Among them:
* i40e and enetc always split page uniformly between frags, use shared
pages
* ice uses page_pool frags via libeth, those are power-of-2 and uniformly
distributed across page
* idpf has variable frag_size with XDP on, so current API is not applicable
* mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool
As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo
operation yields good results for aligned chunks, they are all power-of-2,
between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is
2K. Buffers in unaligned mode are not distributed uniformly, so modulo
operation would not work.
To accommodate unaligned buffers, we could define frag_size as
data + tailroom, and hence do not subtract offset when calculating
tailroom, but this would necessitate more changes in the drivers.
Define rxq->frag_size as an even portion of a page that fully belongs to a
single frag. When calculating tailroom, locate the data start within such
portion by performing a modulo operation on page offset.
Fixes: bf25146a55 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ec92774d ]
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 168ff39e47 ]
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module.
Fixes: e15a00aafa ("vxlan: add ipv6 route short circuit support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260304120357.9778-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5e8906305 ]
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled.
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Guruprasad C P <gurucp2005@gmail.com>
Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6be2681514 ]
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19b8a76cd9 ]
When building kselftests with a toolchain that enables source
fortification (e.g., Android's build environment, which uses
-D_FORTIFY_SOURCE=3), a build failure occurs in tests that use an
empty FIXTURE().
The root cause is that an empty fixture struct results in
`sizeof(self_private)` evaluating to 0. The compiler's fortification
checks then detect the `memset()` call with a compile-time constant size
of 0, issuing a `-Wuser-defined-warnings` which is promoted to an error
by `-Werror`.
An initial attempt to guard the call with `if (sizeof(self_private) > 0)`
was insufficient. The compiler's static analysis is aggressive enough
to flag the `memset(..., 0)` pattern before evaluating the conditional,
thus still triggering the error.
To resolve this robustly, this change introduces a `static inline`
helper function, `__kselftest_memset_safe()`. This function wraps the
size check and the `memset()` call. By replacing the direct `memset()`
in the `__TEST_F_IMPL` macro with a call to this helper, we create an
abstraction boundary. This prevents the compiler's static analyzer from
"seeing" the problematic pattern at the macro expansion site, resolving
the build failure.
Build Context:
Compiler: Android (14488419, +pgo, +bolt, +lto, +mlgo, based on r584948) clang version 22.0.0 (https://android.googlesource.com/toolchain/llvm-project 2d65e4108033380e6fe8e08b1f1826cd2bfb0c99)
Relevant Options: -O2 -Wall -Werror -D_FORTIFY_SOURCE=3 -target i686-linux-android10000
Test: m kselftest_futex_futex_requeue_pi
Removed Gerrit Change-Id
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251224084120.249417-1-wakel@google.com
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 6be2681514 ("selftests/harness: order TEST_F and XFAIL_ADD constructors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0abc73c8a4 ]
Reset eBPF program pointer to old_prog and do not decrease its ref-count
if mtk_open routine in mtk_xdp_setup() fails.
Fixes: 7c26c20da5 ("net: ethernet: mtk_eth_soc: add basic XDP support")
Suggested-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303-mtk-xdp-prog-ptr-fix-v2-1-97b6dbbe240f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9df95785d3 ]
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a7552 ("netfilter: nft_set_rbtree: don't gc elements on insert").
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb7fb40163 ]
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:ffffc900045af780 EFLAGS: 00010293
RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40
RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000
RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0
R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920
FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path.
Reported-by: syzbot+4924a0edc148e8b4b342@syzkaller.appspotmail.com
Fixes: 3f1d886cc7 ("netfilter: nft_set_pipapo: move cloning of match info to insert/removal path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit def602e498 ]
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches.
Fixes: 35d0ac9070 ("netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCL")
Reported-by: Inseo An <y0un9sa@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b824c3e16c ]
After acquiring netdev_queue::_xmit_lock the number of the CPU owning
the lock is recorded in netdev_queue::xmit_lock_owner. This works as
long as the BH context is not preemptible.
On PREEMPT_RT the softirq context is preemptible and without the
softirq-lock it is possible to have multiple user in __dev_queue_xmit()
submitting a skb on the same CPU. This is fine in general but this means
also that the current CPU is recorded as netdev_queue::xmit_lock_owner.
This in turn leads to the recursion alert and the skb is dropped.
Instead checking the for CPU number, that owns the lock, PREEMPT_RT can
check if the lockowner matches the current task.
Add netif_tx_owned() which returns true if the current context owns the
lock by comparing the provided CPU number with the recorded number. This
resembles the current check by negating the condition (the current check
returns true if the lock is not owned).
On PREEMPT_RT use rt_mutex_owner() to return the lock owner and compare
the current task against it.
Use the new helper in __dev_queue_xmit() and netif_local_xmit_active()
which provides a similar check.
Update comments regarding pairing READ_ONCE().
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20260216134333.412332-1-spasswolf@web.de
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260302162631.uGUyIqDT@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce8ee8583e ]
Use trylock instead of blocking lock acquisition for update_nr_hwq_lock
in queue_requests_store() and elv_iosched_store() to avoid circular lock
dependency with kernfs active reference during concurrent disk deletion:
update_nr_hwq_lock -> kn->active (via del_gendisk -> kobject_del)
kn->active -> update_nr_hwq_lock (via sysfs write path)
Return -EBUSY when the lock is not immediately available.
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs-em-4acsHabMdT=jJhXkCzjnprD-aQH1OgrZo4nTnmMw@mail.gmail.com/
Fixes: 626ff4f8eb ("blk-mq: convert to serialize updating nr_requests with update_nr_hwq_lock")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cd70e3968 ]
VLAN register accesses on the MAC side require the PHY RX clock to be
active. When the network interface is down, the PHY is suspended and
the RX clock is unavailable, causing VLAN operations to fail with
timeouts.
The VLAN core automatically removes VID 0 after the interface goes down
and re-adds it when it comes back up, so these timeouts happen during
normal interface down/up:
# ip link set end1 down
renesas-gbeth 15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
renesas-gbeth 15c40000.ethernet end1: failed to kill vid 0081/0
Adding VLANs while the interface is down also fails:
# ip link add link end1 name end1.10 type vlan id 10
renesas-gbeth 15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
RTNETLINK answers: Device or resource busy
To fix this, check if the interface is up before accessing VLAN registers.
The software state is always kept up to date regardless of interface state.
When the interface is brought up, stmmac_vlan_restore() is called
to write the VLAN state to hardware.
Fixes: ed64639bc1 ("net: stmmac: Add support for VLAN Rx filtering")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Link: https://patch.msgid.link/20260303145828.7845-5-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomas Henzl
Sofia Schneider
Ramanathan Choodamani
Al Viro
Sean Rhodes
Ranjan Kumar
Edward Adam Davis
Won Jung
Piotr Mazek
Jan Kiszka
Greg Kroah-Hartman
Niklas Cassel
John Johansen
Massimiliano Pellizzer
Victor Nogueira
Paul Moses
Sasha Levin
Paul Chaignon
Eduard Zingerman
Guenter Roeck
Yifan Wu
Larysa Zaremba
Jamal Hadi Salim
Jiayuan Chen
Fernando Fernandez Mancera
Sun Jian
Wake Liu
Lorenzo Bianconi
Florian Westphal
Pablo Neira Ayuso
Sebastian Andrzej Siewior
Ming Lei
Ovidiu Panait