[ Upstream commit 7bb14b61b7 ]
The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.
The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.
Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.
Fixes: 7160820d74 ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc322d13cf ]
The zoran_fh structure is a wrapper around v4l2_fh. Its usage has been
mostly removed by commit 83f89a8bcb ("media: zoran: convert to vb2"),
but the structure stayed by mistake. It is now used in a single
location, assigned from a void pointer and then recast to a void
pointer, without being every accessed. Drop it.
Fixes: 83f89a8bcb ("media: zoran: convert to vb2")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75ce11790 ]
If reserve_root mount option is not assigned, __allow_reserved_blocks()
will return false, it's not correct, fix it.
Fixes: 7e65be49ed ("f2fs: add reserved blocks for root user")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 260dcf5b06 ]
GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.
drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
1411 | unsigned offset, i, level;
| ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1
level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.
Fixes: 60b212f8dd ("drm/radeon: overhaul texture checking. (v3)")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 125459e19e ]
Fix bug in nt35560_set_brightness() which causes the function to
erroneously report an error. mipi_dsi_dcs_write() returns either a
negative value when an error occurred or a positive number of bytes
written when no error occurred. The buggy code reports an error under
either condition.
Fixes: 8152c2bfd7 ("drm/panel: Add driver for Sony ACX424AKP panel")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-2-me@brighamcampbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4540aed51b ]
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc114dc35 ]
When a module registers a struct_ops, the struct_ops type and its
corresponding map_value type ("bpf_struct_ops_") may reside in different
btf objects, here are four possible case:
+--------+---------------+-------------+---------------------------------+
| |bpf_struct_ops_| xxx_ops | |
+--------+---------------+-------------+---------------------------------+
| case 0 | btf_vmlinux | btf_vmlinux | be used and reg only in vmlinux |
+--------+---------------+-------------+---------------------------------+
| case 1 | btf_vmlinux | mod_btf | INVALID |
+--------+---------------+-------------+---------------------------------+
| case 2 | mod_btf | btf_vmlinux | reg in mod but be used both in |
| | | | vmlinux and mod. |
+--------+---------------+-------------+---------------------------------+
| case 3 | mod_btf | mod_btf | be used and reg only in mod |
+--------+---------------+-------------+---------------------------------+
Currently we figure out the mod_btf by searching with the struct_ops type,
which makes it impossible to figure out the mod_btf when the struct_ops
type is in btf_vmlinux while it's corresponding map_value type is in
mod_btf (case 2).
The fix is to use the corresponding map_value type ("bpf_struct_ops_")
as the lookup anchor instead of the struct_ops type to figure out the
`btf` and `mod_btf` via find_ksym_btf_id(), and then we can locate
the kern_type_id via btf__find_by_name_kind() with the `btf` we just
obtained from find_ksym_btf_id().
With this change the lookup obtains the correct btf and mod_btf for case 2,
preserves correct behavior for other valid cases, and still fails as
expected for the invalid scenario (case 1).
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20250926071751.108293-1-alibuda@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c149841b06 ]
After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70e633bede ]
When the driver is removed, the clocks are first enabled by
calling pm_runtime_get_sync(), and then disabled with
pm_runtime_put_sync().
If CONFIG_PM=y, clocks for this controller are disabled when it's in
the idle state. So the clocks are properly disabled when the driver
exits.
Othewise, the clocks are always enabled and the PM functions have
no effect. Therefore, the driver exits without disabling the clocks.
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
18
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
To ensure that the clocks can be disabled correctly even without
CONFIG_PM=y, should add the following fixes:
- Replace with pm_runtime_put_noidle(), which only decrements the runtime
PM usage count.
- Call i2c_dw_prepare_clk(false) to explicitly disable the clocks.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b492183652 ]
The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.
Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.
Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.
Fixes: b2ed11e224 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller")
Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b50b2c53f9 ]
As reported by LKP, the Qualcomm LMH driver needs to include several
IRQ-related headers, which decrlare necessary IRQ functionality.
Currently driver builds on ARM64 platforms, where the headers are pulled
in implicitly by other headers, but fails to build on other platforms.
Fixes: 53bca371cd ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507270042.KdK0KKht-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-2-33bc58388ca5@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57eda47bd1 ]
The QCOM_SCM symbol is not user-visible, so it makes little sense to
depend on it. Make LMH driver select QCOM_SCM as all other drivers do
and, as the dependecy is now correctly handled, enable || COMPILE_TEST
in order to include the driver into broader set of build tests.
Fixes: 9e5a4fb842 ("thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-1-33bc58388ca5@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c02e4644f8 ]
Distinct between fan speed setting request coming for hwmon and
thermal subsystems.
There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'mlxreg_fan_pwm', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem.
The purpose is to make arbitration of fan speed setting. For example, if
fan speed required to be not lower than some limit, such setting is to
be performed through 'hwmon' subsystem, thus 'thermal' subsystem will
not set fan below this limit.
Currently, the 'last_thermal_state' is also be updated by 'hwmon' causing
cooling state to never be set to a lower value.
Eliminate update of 'last_thermal_state', when request is coming from
'hwmon' subsystem.
Fixes: da74944d3a ("hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limit")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250113084859.27064-2-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edcc8a38b5 ]
The commit c2c60ea37e ("once: use __section(".data.once")") moved
DO_ONCE's ___done variable to .data.once section, which conflicts with
DO_ONCE_LITE() that also uses the same section.
This creates a race condition when clear_warn_once is used:
Thread 1 (DO_ONCE) Thread 2 (DO_ONCE)
__do_once_start
read ___done (false)
acquire once_lock
execute func
__do_once_done
write ___done (true) __do_once_start
release once_lock // Thread 3 clear_warn_once reset ___done
read ___done (false)
acquire once_lock
execute func
schedule once_work __do_once_done
once_deferred: OK write ___done (true)
static_branch_disable release once_lock
schedule once_work
once_deferred:
BUG_ON(!static_key_enabled)
DO_ONCE_LITE() in once_lite.h is used by WARN_ON_ONCE() and other warning
macros. Keep its ___done flag in the .data..once section and allow resetting
by clear_warn_once, as originally intended.
In contrast, DO_ONCE() is used for functions like get_random_once() and
relies on its ___done flag for internal synchronization. We should not reset
DO_ONCE() by clear_warn_once.
Fix it by isolating DO_ONCE's ___done into a separate .data..do_once section,
shielding it from clear_warn_once.
Fixes: c2c60ea37e ("once: use __section(".data.once")")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4680a11e1 ]
Some distributions (e.g., CachyOS) support building the kernel with -O3,
but doing so may break kfuncs, resulting in their symbols not being
properly exported.
In fact, with gcc -O3, some kfuncs may be optimized away despite being
annotated as noinline. This happens because gcc can still clone the
function during IPA optimizations, e.g., by duplicating or inlining it
into callers, and then dropping the standalone symbol. This breaks BTF
ID resolution since resolve_btfids relies on the presence of a global
symbol for each kfunc.
Currently, this is not an issue for upstream, because we don't allow
building the kernel with -O3, but it may be safer to address it anyway,
to prevent potential issues in the future if compilers become more
aggressive with optimizations.
Therefore, add __noclone to __bpf_kfunc to ensure kfuncs are never
cloned and remain distinct, globally visible symbols, regardless of
the optimization level.
Fixes: 57e7c169cd ("bpf: Add __bpf_kfunc tag for marking kernel functions as kfuncs")
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Link: https://lore.kernel.org/r/20250924081426.156934-1-arighi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 188f63235b ]
Don't return a positive value when there are too many chipselects.
Fixes: 4d8ff6b099 ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250915183725.219473-2-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ff52df6b3 ]
Commit d5094bcb5b ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb2 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5b ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf09357ff ]
The smp_call_function_many() kerneldoc comment got out of sync with the
function definition (bool parameter "wait" is incorrectly described as a
bitmask in it), so fix it up by copying the "wait" description from the
smp_call_function() kerneldoc and add information regarding the handling
of the local CPU to it.
Fixes: 49b3bd213a ("smp: Fix all kernel-doc warnings")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ff4a0fa3e ]
The current implementation seems incorrect and does NOT match the
comment above, use bpf_jit_binary_pack_finalize() instead.
Fixes: 1dad391dae ("bpf, arm64: use bpf_prog_pack for memory management")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250916232653.101004-1-hengqi.chen@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fabca2fc9 ]
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8cfc524ea ]
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3448a934ba ]
In svc_i3c_master_handle_ibi(), an IBI slot is fetched from the pool
to store the IBI payload. However, when an error condition is encountered,
the function returns without recycling the IBI slot, resulting in an IBI
slot leak.
Fixes: c85e209b79 ("i3c: master: svc: fix ibi may not return mandatory data byte")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7869b0a25 ]
Driver wants to nack the IBI request when the target is not in the
known address list. In below code, svc_i3c_master_nack_ibi() will
cause undefined behavior when using AUTOIBI with auto response rule,
because hw always auto ack the IBI request.
switch (ibitype) {
case SVC_I3C_MSTATUS_IBITYPE_IBI:
dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
svc_i3c_master_nack_ibi(master);
...
break;
AutoIBI has another issue that the controller doesn't quit AutoIBI state
after IBIWON polling timeout when there is a SDA glitch(high->low->high).
1. SDA high->low: raising an interrupt to execute IBI ISR
2. SDA low->high
3. Driver writes an AutoIBI request
4. AutoIBI process does not start because SDA is not low
5. IBIWON polling times out
6. Controller reamins in AutoIBI state and doesn't accept EmitStop request
Emitting broadcast address with IBIRESP_MANUAL avoids both issues.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db5a5406fb ]
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.
Fixes: 710c69dbac ("nvmet-fc: avoid deadlock on delete association path")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca944fea4 ]
ACPI_RESOURCE_NAME_LARGE_MAX should be equal to the last actually
used resource descriptor index (ACPI_RESOURCE_NAME_CLOCK_INPUT).
Otherwise 'resource_index' in 'acpi_ut_validate_resource()' may be
clamped incorrectly and resulting value may issue an out-of-bounds
access for 'acpi_gbl_resource_types' array. Compile tested only.
Fixes: 520d4a0ee5 ("ACPICA: add support for ClockInput resource (v6.5)")
Link: cf00116c
Link: https://marc.info/?l=linux-acpi&m=175449676131260&w=2
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f83f0e07 ]
The function set_prescale_div() is responsible for calculating the clock
divisor settings such that the input clock rate is divided down such that
the required period length is at most 0x10000 clock ticks. If period_cycles
is an integer multiple of 0x10000, the divisor period_cycles / 0x10000 is
good enough. So round up in the calculation of the required divisor and
compare it using >= instead of >.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/85488616d7bfcd9c32717651d0be7e330e761b9c.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc7ce5bfc5 ]
In Up-Count Mode the timer is reset to zero one tick after it reaches
TBPRD, so the period length is (TBPRD + 1) * T_TBCLK. This matches both
the documentation and measurements. So the value written to the TBPRD has
to be one less than the calculated period_cycles value.
A complication here is that for a 100% relative duty-cycle the value
written to the CMPx register has to be TBPRD + 1 which might overflow if
TBPRD is 0xffff. To handle that the calculation of the AQCTLx register
has to be moved to ehrpwm_pwm_config() and the edge at CTR = CMPx has to
be skipped.
Additionally the AQCTL_PRD register field has to be 0 because that defines
the hardware's action when the maximal counter value is reached, which is
(as above) one clock tick before the period's end. The period start edge
has to happen when the counter is reset and so is defined in the AQCTL_ZRO
field.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/dc818c69b7cf05109ecda9ee6b0043a22de757c1.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a5e91fda ]
The pwm driver calls pm_runtime_get_sync() when the hardware becomes
enabled and pm_runtime_put_sync() when it becomes disabled. The PWM's
state is kept when a consumer goes away, so the call to
pm_runtime_put_sync() in the .free() callback is unbalanced resulting in
a non-functional device and a reference underlow for the second consumer.
The easiest fix for that issue is to just not drop the runtime PM
reference in .free(), so do that.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/bbb089c4b5650cc1f7b25cf582d817543fd25384.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe6a5d1dd ]
This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.
Fixes: 9983822c8c ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-39-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a1e9c973 ]
All of the MT6360 regulator nodes were wrong and would not probe
because the regulator names are supposed to be lower case, but
they are upper case in this devicetree.
Change all nodes to be lower case to get working regulators.
Fixes: 94aaf79a6a ("arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236681fb64 ]
Change the latch-ck value from 0x14 to 4: as only bits [0-3] are
actually used, the final value that gets written to the register
field for DAT_LATCH_CK_SEL is just 0x4.
This also fixes dtbs_check warnings.
Fixes: 5a65dcccf4 ("arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250724083914.61351-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072755cca7 ]
Rename the inner 'frm' variable to 'resp_frm' in the write path of
mmc_route_rpmb_frames() to avoid shadowing the outer 'frm' variable.
The function declares 'frm' at function scope pointing to the request
frame, but then redeclares another 'frm' variable inside the write
block pointing to the response frame. This shadowing makes the code
confusing and error-prone.
Using 'resp_frm' for the response frame makes the distinction clear
and improves code readability.
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98967109c9 ]
The node names for "pmic", "regulators", "rtc", and "keys" are
dictated by the PMIC MFD binding: change those to adhere to it.
Fixes: aef783f3e0 ("arm64: dts: mediatek: Add MT6331 PMIC devicetree")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0370911565 ]
The touchscreen controller used with the original Krabby design is the
Elan eKTH6918, which is in the same family as eKTH6915, but supporting
a larger screen size with more sense lines.
OTOH, the touchscreen controller that actually shipped on the Tentacruel
devices is the Elan eKTH6A12NAY. A compatible string was added for it
specifically because it has different power sequencing timings.
Fix up the touchscreen nodes for both these. This also includes adding
a previously missing reset line. Also add "no-reset-on-power-off" since
the power is always on, and putting it in reset would consume more
power.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250812090135.3310374-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc06f9126 ]
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a68ba573 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-3-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab4f79ea9 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-2-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0454346d1c ]
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 4a434abc40 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f89c7fb83a ]
On RK3588 with LPDDR4X memory, the cycle count as returned by
perf stat -a -e rockchip_ddr/cycles/ sleep 1
consistently reads half as much as what the actual DDR frequency is at.
For a LPDDR4X module running at 2112MHz, I get more like 1056059916
cycles per second, which is almost bang-on half what it should be. No,
I'm not mixing up megatransfers and megahertz.
Consulting the downstream driver, this appears to be because the RK3588
hardware specifically (and RK3528 as well, for future reference) needs a
multiplier of 2 to get to the correct frequency with everything but
LPDDR5.
The RK3588's actual memory bandwidth measurements in MB/s are correct
however, as confirmed with stress-ng --stream. This makes me think the
access counters are not affected in the same way. This tracks with the
vendor kernel not multiplying the access counts either.
Solve this by adding a new member to the dfi struct, which each SoC can
set to whatever they want, but defaults to 1 if left unset by the SoC
init functions. The event_get_count op can then use this multiplier if
the cycle count is requested.
The cycle multiplier is not used in rockchip_dfi_get_event because the
vendor driver doesn't use it there either, and we don't do other actual
bandwidth unit conversion stuff in there anyway.
Fixes: 481d97ba61 ("PM / devfreq: rockchip-dfi: add support for RK3588")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250530-rk3588-dfi-improvements-v1-1-6e077c243a95@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3374b5fb26 ]
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38 ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b59a9f762 ]
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f15e0f9ef ]
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7942b226e6 ]
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f062fc5b0 ]
Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned
int to int, as it needs to store either negative error codes or zero
returned by sh_pfc_pinconf_set().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: d0593c363f ("pinctrl: sh-pfc: Propagate errors on group config")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit def5612170 ]
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc33bf0e09 ]
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid.
Fixes: e09bd5757b ("PM / devfreq: mtk-cci: Handle sram regulator probe deferral")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/aJTNHz8kk8s6Q2os@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
