[ Upstream commit 99c248c41c ]
[why]
When setup is called after hdcp has already setup,
it would cause to disable HDCP flow won’t execute.
[how]
Don't clean up hdcp content to be 0.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba4e0339a6 ]
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a50e74bec1 ]
Selecting DRM_FBDEV_EMULATION will include the correct settings for
fbdev emulation. Drivers should not override this.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-4-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13b29cc3a7 ]
Selecting DRM_FBDEV_EMULATION will include the correct settings for
fbdev emulation. Drivers should not override this.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-3-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c669ef697 upstream.
Powerpc currently resets a CPU's idle task preempt_count to 0 before
said task starts executing the secondary startup routine (and becomes an
idle task proper).
This conflicts with commit f1a0a376ca ("sched/core: Initialize the
idle task with preemption disabled").
which initializes all of the idle tasks' preempt_count to
PREEMPT_DISABLED during smp_init(). Note that this was superfluous
before said commit, as back then the hotplug machinery would invoke
init_idle() via idle_thread_get(), which would have already reset the
CPU's idle task's preempt_count to PREEMPT_ENABLED.
Get rid of this preempt_count write.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210707183831.2106509-1-valentin.schneider@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7154cbd31c upstream.
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e6b8a50a7 upstream.
If set_cred_ucounts() failed, we need return the error code.
Fixes: 905ae01c4a ("Add a reference to ucounts for each cred")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lkml.kernel.org/r/20210526143805.2549649-1-yangyingliang@huawei.com
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8ea6fc9b0 upstream.
Commit:
00b89fe019 ("sched: Make the idle task quack like a per-CPU kthread")
... added PF_KTHREAD | PF_NO_SETAFFINITY to the idle kernel threads.
Unfortunately these properties are inherited to the init/0 children
through kernel_thread() calls: init/1 and kthreadd. There are several
side effects to that:
1) kthreadd affinity can not be reset anymore from userspace. Also
PF_NO_SETAFFINITY propagates to all kthreadd children, including
the unbound kthreads Therefore it's not possible anymore to overwrite
the affinity of any of them. Here is an example of warning reported
by rcutorture:
WARNING: CPU: 0 PID: 116 at kernel/rcu/tree_nocb.h:1306 rcu_bind_current_to_nocb+0x31/0x40
Call Trace:
rcu_torture_fwd_prog+0x62/0x730
kthread+0x122/0x140
ret_from_fork+0x22/0x30
2) init/1 does an exec() in the end which clears both
PF_KTHREAD and PF_NO_SETAFFINITY so we are fine once kernel_init()
escapes to userspace. But until then, no initcall or init code can
successfully call sched_setaffinity() to init/1.
Also PF_KTHREAD looks legit on init/1 before it calls exec() but
we better be careful with unknown introduced side effects.
One way to solve the PF_NO_SETAFFINITY issue is to not inherit this flag
on copy_process() at all. The cases where it matters are:
* fork_idle(): explicitly set the flag already.
* fork() syscalls: userspace tasks that shouldn't be concerned by that.
* create_io_thread(): the callers explicitly attribute the flag to the
newly created tasks.
* kernel_thread():
- Fix the issues on init/1 and kthreadd
- Fix the issues on kthreadd children.
- Usermode helper created by an unbound workqueue. This shouldn't
matter. In the worst case it gives more control to userspace
on setting affinity to these short living tasks although this can
be tuned with inherited unbound workqueues affinity already.
Fixes: 00b89fe019 ("sched: Make the idle task quack like a per-CPU kthread")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20210525235849.441842-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a942f5780 upstream.
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).
Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.
Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8bc4f5e7a upstream.
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 1339a7c3ba ("crypto: qce: skcipher: Fix incorrect sg count for dma transfers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 104739aca4 upstream.
If the device is power-cycled, it takes time for the initiator to transmit
the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to
respond to the primitive to become ACTIVE. Retry the I/O request to allow
the device time to become ACTIVE.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Quat Le <quat.le@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29dd19e3ac upstream.
The usage of pm_runtime_resume_and_get() removed the need of a
temporary integer. So, drop it.
Fixes: 59f96244af ("media: exynos4-is: fix pm_runtime_get_sync() usage count")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c0bb31077 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the SET_ROM_WAIT_STATES request which erroneously used
usb_rcvctrlpipe().
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b52f0908 upstream.
According to the eMMC Spec:
"When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN
field is set to ‘1’) class 11 commands are the only method through
which data transfer tasks can be issued. Existing data transfer
commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when
command queuing is enabled."
which means if CMDQ is enabled, the FFU commands will not be supported.
To fix this issue, just simply disable CMDQ on the ioctl path, and
re-enable CMDQ once ioctl request is completed.
Tested-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 1e8e55b670 (mmc: block: Add CQE support)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22634bc562 upstream.
We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.
Fixes: 14a1143b68 ("io_uring: add support for IORING_OP_UNLINKAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed7eb25922 upstream.
We can't support IOPOLL with non-pollable request types, and we should
check for unused/reserved fields like we do for other request types.
Fixes: 80a261fd00 ("io_uring: add support for IORING_OP_RENAMEAT")
Cc: stable@vger.kernel.org
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 976517f162 upstream.
There is a complaint against sys_io_uring_enter() blocking if it submits
stdin reads. The problem is in __io_file_supports_async(), which
sees that it's a cdev and allows it to be processed inline.
Punt char devices using generic rules of io_file_supports_async(),
including checking for presence of *_iter() versions of rw callbacks.
Apparently, it will affect most of cdevs with some exceptions like
null and zero devices.
Cc: stable@vger.kernel.org
Reported-by: Birk Hirdman <lonjil@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d60270856b8a4560a639ef5f76e55eb563633599.1623236455.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9c9762d4d upstream.
After commit 07173c3ec2 ("block: enable multipage bvecs"), a bvec can
have multiple pages. But bio_will_gap() still assumes one page bvec while
checking for merging. If the pages in the bvec go across the
seg_boundary_mask, this check for merging can potentially succeed if only
the 1st page is tested, and can fail if all the pages are tested.
Later, when SCSI builds the SG list the same check for merging is done in
__blk_segment_map_sg_merge() with all the pages in the bvec tested. This
time the check may fail if the pages in bvec go across the
seg_boundary_mask (but tested okay in bio_will_gap() earlier, so those
BIOs were merged). If this check fails, we end up with a broken SG list
for drivers assuming the SG list not having offsets in intermediate pages.
This results in incorrect pages written to the disk.
Fix this by returning the multi-page bvec when testing gaps for merging.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1623094445-22332-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0178f9d0f6 upstream.
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531a ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fc2b430f5 upstream.
Typically, the cryptographic APIs that fscrypt uses take keys as byte
arrays, which avoids endianness issues. However, siphash_key_t is an
exception. It is defined as 'u64 key[2];', i.e. the 128-bit key is
expected to be given directly as two 64-bit words in CPU endianness.
fscrypt_derive_dirhash_key() and fscrypt_setup_iv_ino_lblk_32_key()
forgot to take this into account. Therefore, the SipHash keys used to
index encrypted+casefolded directories differ on big endian vs. little
endian platforms, as do the SipHash keys used to hash inode numbers for
IV_INO_LBLK_32-encrypted directories. This makes such directories
non-portable between these platforms.
Fix this by always using the little endian order. This is a breaking
change for big endian platforms, but this should be fine in practice
since these features (encrypt+casefold support, and the IV_INO_LBLK_32
flag) aren't known to actually be used on any big endian platforms yet.
Fixes: aa408f835d ("fscrypt: derive dirhash key for casefolded directories")
Fixes: e3b1078bed ("fscrypt: add support for IV_INO_LBLK_32 policies")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://lore.kernel.org/r/20210605075033.54424-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77f30bfcfc upstream.
When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.
This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case. Fix this by
removing the special case for 'hash == 0'.
This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and
f2fs code passed the hash by pointer instead of by value. So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL. But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have. There is no
need to handle this any differently from the hashes actually being 0.
It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie. ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.
Fixes: 0b81d07790 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc: <stable@vger.kernel.org> # v4.6+
Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f70328c06 upstream.
Incorrect condition check was leading to data corruption.
Link: https://lore.kernel.org/r/20210603101404.7841-3-jhasan@marvell.com
Fixes: 8fd9efca86 ("scsi: libfc: Work around -Warray-bounds warning")
CC: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4012baeab6 upstream.
When lpfc is handling a solicited and unsolicited PLOGI with another
initiator, the remote initiator is never recovered. The node for the
initiator is erroneouosly removed and all resources released.
In lpfc_cmpl_els_plogi(), when lpfc_els_retry() returns a failure code, the
driver is calling the state machine with a device remove event because the
remote port is not currently registered with the SCSI or NVMe
transports. The issue is that on a PLOGI "collision" the driver correctly
aborts the solicited PLOGI and allows the unsolicited PLOGI to complete the
process, but this process is interrupted with a device_rm event.
Introduce logic in the PLOGI completion to capture the PLOGI collision
event and jump out of the routine. This will avoid removal of the node.
If there is no collision, the normal node removal will occur.
Fixes: 52edb2caf6 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails")
Cc: <stable@vger.kernel.org> # v5.11+
Link: https://lore.kernel.org/r/20210514195559.119853-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01131e7aae upstream.
While testing NPIV and watching logins and used RPI levels, it was seen the
used RPI count was much higher than the number of remote ports discovered.
Code inspection showed that remote port removals on any NPIV instance are
releasing the RPI, but not performing an UNREG_RPI with the adapter thus
the reference counting never fully drops and the RPI is never fully
released. This was happening on NPIV nodes due to a log of fabric ELS's to
fabric addresses. This lack of UNREG_RPI was introduced by a prior node
rework patch that performed the UNREG_RPI as part of node cleanup.
To resolve the issue, do the following:
- Restore the RPI release code, but move the location to so that it is in
line with the new node cleanup design.
- NPIV ports now release the RPI and drop the node when the caller sets
the NLP_RELEASE_RPI flag.
- Set the NLP_RELEASE_RPI flag in node cleanup which will trigger a
release of RPI to free pool.
- Ensure there's an UNREG_RPI at LOGO completion so that RPI release is
completed.
- Stop offline_prep from skipping nodes that are UNUSED. The RPI may
not have been released.
- Stop the default RPI handling in lpfc_cmpl_els_rsp() for SLI4.
- Fixed up debugfs RPI displays for better debugging.
Fixes: a70e63eee1 ("scsi: lpfc: Fix NPIV Fabric Node reference counting")
Link: https://lore.kernel.org/r/20210514195559.119853-2-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40445fd2c9 upstream.
As per the FC-GS-5 specification, attribute lengths of node_name and
manufacturer should in range of "4 to 64 Bytes" only.
Link: https://lore.kernel.org/r/20210603101404.7841-2-jhasan@marvell.com
Fixes: e721eb0616 ("scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions")
CC: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79db830162 upstream.
The driver issues all non-ReadWrite I/Os for TYPE_ENCLOSURE devices through
the fast path with invalid dev handle. Fast path in turn directs all the
I/Os to the firmware. As firmware stopped handling those I/Os from SAS3.5
generation of controllers (Ventura generation and onwards) this will lead
to I/O failures.
Switch the driver to issue all the non-ReadWrite I/Os for TYPE_ENCLOSURE
devices directly to firmware for SAS3.5 generation of controllers and
later.
Link: https://lore.kernel.org/r/20210528131307.25683-2-chandrakanth.patil@broadcom.com
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e5654de0f upstream.
The compatibility issue between linux exfat and exfat of some camera
company was reported from Florian. In their exfat, if the number of files
exceeds any limit, the DataLength in stream entry of the directory is
no longer updated. So some files created from camera does not show in
linux exfat. because linux exfat doesn't allow that cpos becomes larger
than DataLength of stream entry. This patch check DataLength in stream
entry only if the type is ALLOC_NO_FAT_CHAIN and add the check ensure
that dentry offset does not exceed max dentries size(256 MB) to avoid
the circular FAT chain issue.
Fixes: ca06197382 ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.9
Reported-by: Florian Cramer <flrncrmr@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Tested-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 763778cd79 ]
Prior to commit 1538d82f46 ("i2c: mpc: Interrupt driven transfer") the
old interrupt handler would reread MPC_I2C_SR after checking the CSR_MIF
bit. When the driver was re-written this was removed as it seemed
unnecessary. However as it turns out this is necessary for i2c devices
which do clock stretching otherwise we end up thinking the bus is still
busy when processing the interrupt.
Fixes: 1538d82f46 ("i2c: mpc: Interrupt driven transfer")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c435c166dc ]
Zhihao sent a patch but it made llvm__compile_bpf() return what
asprintf() returns on error, which is just -1, but since this function
returns -errno, fix it by returning -ENOMEM for this case instead.
Fixes: cb76371441 ("perf llvm: Allow passing options to llc ...")
Fixes: 5eab5a7ee0 ("perf llvm: Display eBPF compiling command ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210609115945.2193194-1-chengzhihao1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6039ca2549 ]
The pkey test code keeps a "shadow" of the pkey register around. This
ensures that any bugs which might write to the register can be caught more
quickly.
Generally, userspace has a good idea when the kernel is going to write to
the register. For instance, alloc_pkey() is passed a permission mask.
The caller of alloc_pkey() can update the shadow based on the return value
and the mask.
But, the kernel can also modify the pkey register in a more sneaky way.
For mprotect(PROT_EXEC) mappings, the kernel will allocate a pkey and
write the pkey register to create an execute-only mapping. The kernel
never tells userspace what key it uses for this.
This can cause the test to fail with messages like:
protection_keys_64.2: pkey-helpers.h:132: _read_pkey_reg: Assertion `pkey_reg == shadow_pkey_reg' failed.
because the shadow was not updated with the new kernel-set value.
Forcibly update the shadow value immediately after an mprotect().
Link: https://lkml.kernel.org/r/20210611164200.EF76AB73@viggo.jf.intel.com
Fixes: 6af17cf89e ("x86/pkeys/selftests: Add PROT_EXEC test")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf68294a2e ]
The alloc_pkey() sefltest function wraps the sys_pkey_alloc() system call.
On success, it updates its "shadow" register value because
sys_pkey_alloc() updates the real register.
But, the success check is wrong. pkey_alloc() considers any non-zero
return code to indicate success where the pkey register will be modified.
This fails to take negative return codes into account.
Consider only a positive return value as a successful call.
Link: https://lkml.kernel.org/r/20210611164157.87AB4246@viggo.jf.intel.com
Fixes: 5f23f6d082 ("x86/pkeys: Add self-tests")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f36ef40762 ]
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE
architecture which is used to context-switch processor state (among other
things). In addition, AMD has recently joined the protection keys club by
adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init
state", which actually applied to Intel's implementation but was just
harder to hit. This series adds a test which is expected to help find
this class of bug both on AMD and Intel. All the work around pkeys on x86
also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second
resolution. So, each time alloc_random_pkey() is called, the PRNG is
*RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>);
foo = rand();
bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if
you do:
srand(1);
foo = rand();
srand(1);
bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent
"fix" effectively forced the test case to use the same "random" pkey for
the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
Link: https://lkml.kernel.org/r/20210611164153.91B76FB8@viggo.jf.intel.com
Link: https://lkml.kernel.org/r/20210611164155.192D00FF@viggo.jf.intel.com
Fixes: 6e373263ce ("selftests/vm/pkeys: fix alloc_random_pkey() to make it really random")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65a0d3c146 ]
If the input is out of the range of the allowed values, either larger than
the largest value or closer to zero than the smallest non-zero allowed
value, then a division by zero would occur.
In the case of input too large, the division by zero will occur on the
first iteration. The best result (largest allowed value) will be found by
always choosing the semi-convergent and excluding the denominator based
limit when finding it.
In the case of the input too small, the division by zero will occur on the
second iteration. The numerator based semi-convergent should not be
calculated to avoid the division by zero. But the semi-convergent vs
previous convergent test is still needed, which effectively chooses
between 0 (the previous convergent) vs the smallest allowed fraction (best
semi-convergent) as the result.
Link: https://lkml.kernel.org/r/20210525144250.214670-1-tpiepho@gmail.com
Fixes: 323dd2c3ed ("lib/math/rational.c: fix possible incorrect result from rational fractions helper")
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Reported-by: Yiyuan Guo <yguoaz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Oskar Schirmer <oskar@scara.com>
Cc: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff06e45d3a ]
Unconditionally use unbound work queue, and not just if wq_power_efficient
is true. Because if the system is idle, KFENCE may wait, and by being run
on the unbound work queue, we permit the scheduler to make better
scheduling decisions and not require pinning KFENCE to the same CPU upon
waking up.
Link: https://lkml.kernel.org/r/20210521111630.472579-1-elver@google.com
Fixes: 36f0b35d08 ("kfence: use power-efficient work queue to run delayed work")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46b76f2e09 ]
In the ZSWAP_SWAPCACHE_FAIL and ZSWAP_SWAPCACHE_EXIST case, we forgot to
call zpool_unmap_handle() when zpool can't sleep. And we might sleep in
zswap_get_swap_cache_page() while zpool can't sleep. To fix all of these,
zpool_unmap_handle() should be done before zswap_get_swap_cache_page()
when zpool can't sleep.
Link: https://lkml.kernel.org/r/20210522092242.3233191-4-linmiaohe@huawei.com
Fixes: fc6697a89f ("mm/zswap: add the flag can_sleep_mapped")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6acfb5ba15 ]
Since commit d6995da311 ("hugetlb: use page.private for hugetlb specific
page flags") converts page.private for hugetlb specific page flags. We
should use hugetlb_page_subpool() to get the subpool pointer instead of
page_private().
This 'could' prevent the migration of hugetlb pages. page_private(hpage)
is now used for hugetlb page specific flags. At migration time, the only
flag which could be set is HPageVmemmapOptimized. This flag will only be
set if the new vmemmap reduction feature is enabled. In addition,
!page_mapping() implies an anonymous mapping. So, this will prevent
migration of hugetb pages in anonymous mappings if the vmemmap reduction
feature is enabled.
In addition, that if statement checked for the rare race condition of a
page being migrated while in the process of being freed. Since that check
is now wrong, we could leak hugetlb subpool usage counts.
The commit forgot to update it in the page migration routine. So fix it.
[songmuchun@bytedance.com: fix compiler error when !CONFIG_HUGETLB_PAGE reported by Randy]
Link: https://lkml.kernel.org/r/20210521022747.35736-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210520025949.1866-1-songmuchun@bytedance.com
Fixes: d6995da311 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com> [arm64]
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28473d91ff ]
We should use release_z3fold_page_locked() to release z3fold page when
it's locked, although it looks harmless to use release_z3fold_page() now.
Link: https://lkml.kernel.org/r/20210619093151.1492174-7-linmiaohe@huawei.com
Fixes: dcf5aedb24 ("z3fold: stricter locking and more careful reclaim")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dac0d1cfda ]
There is a memory leak in z3fold_destroy_pool() as it forgets to
free_percpu pool->unbuddied. Call free_percpu for pool->unbuddied to fix
this issue.
Link: https://lkml.kernel.org/r/20210619093151.1492174-6-linmiaohe@huawei.com
Fixes: d30561c56f ("z3fold: use per-cpu unbuddied lists")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48b8d744ea ]
Patch series "Fix prep_compound_gigantic_page ref count adjustment".
These patches address the possible race between
prep_compound_gigantic_page and __page_cache_add_speculative as described
by Jann Horn in [1].
The first patch simply removes the unnecessary/obsolete helper routine
prep_compound_huge_page to make the actual fix a little simpler.
The second patch is the actual fix and has a detailed explanation in the
commit message.
This potential issue has existed for almost 10 years and I am unaware of
anyone actually hitting the race. I did not cc stable, but would be happy
to squash the patches and send to stable if anyone thinks that is a good
idea.
[1] https://lore.kernel.org/linux-mm/CAG48ez23q0Jy9cuVnwAe7t_fdhMk2S7N5Hdi-GLcCeq5bsfLxw@mail.gmail.com/
This patch (of 2):
I could not think of a reliable way to recreate the issue for testing.
Rather, I 'simulated errors' to exercise all the error paths.
The routine prep_compound_huge_page is a simple wrapper to call either
prep_compound_gigantic_page or prep_compound_page. However, it is only
called from gather_bootmem_prealloc which only processes gigantic pages.
Eliminate the routine and call prep_compound_gigantic_page directly.
Link: https://lkml.kernel.org/r/20210622021423.154662-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210622021423.154662-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit babbbdd08a ]
If other processes are mapping any other subpages of the hugepage, i.e.
in pte-mapped thp case, page_mapcount() will return 1 incorrectly. Then
we would discard the page while other processes are still mapping it. Fix
it by using total_mapcount() which can tell whether other processes are
still mapping it.
Link: https://lkml.kernel.org/r/20210511134857.1581273-6-linmiaohe@huawei.com
Fixes: b8d3c4c300 ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called")
Reviewed-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6be37b2e7 ]
Since commit 99cb0dbd47 ("mm,thp: add read-only THP support for
(non-shmem) FS"), read-only THP file mapping is supported. But it forgot
to add checking for it in transparent_hugepage_enabled(). To fix it, we
add checking for read-only THP file mapping and also introduce helper
transhuge_vma_enabled() to check whether thp is enabled for specified vma
to reduce duplicated code. We rename transparent_hugepage_enabled to
transparent_hugepage_active to make the code easier to follow as suggested
by David Hildenbrand.
[linmiaohe@huawei.com: define transhuge_vma_enabled next to transhuge_vma_suitable]
Link: https://lkml.kernel.org/r/20210514093007.4117906-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210511134857.1581273-4-linmiaohe@huawei.com
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2bd53f18b ]
Patch series "Cleanup and fixup for huge_memory:, v3.
This series contains cleanups to remove dedicated macro and remove
unnecessary tlb_remove_page_size() for huge zero pmd. Also this adds
missing read-only THP checking for transparent_hugepage_enabled() and
avoids discarding hugepage if other processes are mapping it. More
details can be found in the respective changelogs.
Thi patch (of 5):
Rewrite the pgoff checking logic to remove macro HPAGE_CACHE_INDEX_MASK
which is only used here to simplify the code.
Link: https://lkml.kernel.org/r/20210511134857.1581273-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210511134857.1581273-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b0482229c ]
If an NMI interrupt hits in an implicit soft-masked region, regs->softe
is modified to reflect that. This may not be necessary for correctness
at the moment, but it is less surprising and it's unhelpful when
debugging or adding checks.
Make sure this is changed back to how it was found before returning.
Fixes: 4ec5feec1a ("powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-6-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5567b1ee29 ]
The early bad fault or key fault test in do_hash_fault() ends up calling
into ___do_page_fault without having gone through an interrupt handler
wrapper (except the initial _RAW one). This can end up calling local irq
functions while the interrupt has not been reconciled, which will likely
cause crashes and it trips up on a later patch that adds more assertions.
pkey_exec_prot from selftests causes this path to be executed.
There is no real reason to run the in_nmi() test should be performed
before the key fault check. In fact if a perf interrupt in the hash
fault code did a stack walk that was made to take a key fault somehow
then running ___do_page_fault could possibly cause another hash fault
causing problems. Move the in_nmi() test first, and then do everything
else inside the regular interrupt handler function.
Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
