commit 97a0f2b5f4 upstream.
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
commit 86790e300d upstream.
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8326193401 upstream.
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa7b65c2a2 upstream.
Starting with Rust 1.89.0 (expected 2025-08-07), under
`CONFIG_RUST_DEBUG_ASSERTIONS=y`, `objtool` may report:
rust/kernel.o: warning: objtool: _R..._6kernel4pageNtB5_4Page8read_raw()
falls through to next function _R..._6kernel4pageNtB5_4Page9write_raw()
(and many others) due to calls to the `noreturn` symbol:
core::panicking::panic_nounwind_fmt
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250712160103.1244945-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85a3bce695 upstream.
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5e8acc14d upstream.
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ed171a3af upstream.
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d76944 ("tracing/probes: Support BTF field access from $retval")
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d0777ccaa upstream.
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43
Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Fixes: 4fa5a7f76c ("HID: core: implement generic .request()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 710505212e upstream.
The current SPI framework does not verify if the SPI device supports
8 IO mode when doing an 8-bit transfer. This patch adds a check to
ensure that if the transfer tx_nbits or rx_nbits is 8, the SPI mode must
support 8 IO. If not, an error is returned, preventing undefined behavior.
Fixes: d6a711a898 ("spi: Fix OCTAL mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://patch.msgid.link/20250714031023.504752-1-linchengming884@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c0e9f05c9 upstream.
The dma_sync_sg_for_device() functions should be called with the same
nents as the dma_map_sg(), not the value the map function returned
according to the documentation in Documentation/core-api/dma-api.rst:450:
With the sync_sg API, all the parameters must be the same
as those passed into the sg mapping API.
Fixes: da3564ee02 ("pch_uart: add multi-scatter processing")
Cc: stable <stable@kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcce05041b upstream.
The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX.
Also the entry is in the wrong place. Fix it.
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250708033126.26216-2-niltonperimneto@gmail.com
Fixes: 22c69d786e ("Input: xpad - support Acer NGR 200 Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d7521aa26 upstream.
On 11 Oct 2022, it was reported that the crc32 verification
of the u-boot environment failed only on big-endian systems
for the u-boot-env nvmem layout driver with the following error.
Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88)
This problem has been present since the driver was introduced,
and before it was made into a layout driver.
The suggested fix at the time was to use further endianness
conversion macros in order to have both the stored and calculated
crc32 values to compare always represented in the system's endianness.
This was not accepted due to sparse warnings
and some disagreement on how to handle the situation.
Later on in a newer revision of the patch, it was proposed to use
cpu_to_le32() for both values to compare instead of le32_to_cpu()
and store the values as __le32 type to remove compilation errors.
The necessity of this is based on the assumption that the use of crc32()
requires endianness conversion because the algorithm uses little-endian,
however, this does not prove to be the case and the issue is unrelated.
Upon inspecting the current kernel code,
there already is an existing use of le32_to_cpu() in this driver,
which suggests there already is special handling for big-endian systems,
however, it is big-endian systems that have the problem.
This, being the only functional difference between architectures
in the driver combined with the fact that the suggested fix
was to use the exact same endianness conversion for the values
brings up the possibility that it was not necessary to begin with,
as the same endianness conversion for two values expected to be the same
is expected to be equivalent to no conversion at all.
After inspecting the u-boot environment of devices of both endianness
and trying to remove the existing endianness conversion,
the problem is resolved in an equivalent way as the other suggested fixes.
Ultimately, it seems that u-boot is agnostic to endianness
at least for the purpose of environment variables.
In other words, u-boot reads and writes the stored crc32 value
with the same endianness that the crc32 value is calculated with
in whichever endianness a certain architecture runs on.
Therefore, the u-boot-env driver does not need to convert endianness.
Remove the usage of endianness macros in the u-boot-env driver,
and change the type of local variables to maintain the same return type.
If there is a special situation in the case of endianness,
it would be a corner case and should be handled by a unique "compatible".
Even though it is not necessary to use endianness conversion macros here,
it may be useful to use them in the future for consistent error printing.
Fixes: d5542923f2 ("nvmem: add driver handling U-Boot environment variables")
Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://lore.kernel.org/all/20221011024928.1807-1-musashino.open@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: "Michael C. Pratt" <mcpratt@pm.me>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250716144210.4804-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2aa4ad626e upstream.
The commit "13bcd440f2 nvmem: core: verify cell's raw_len" caused an
extension of the "mac-address" cell from 6 to 8 bytes due to word_size
of 4 bytes. This led to a required byte swap of the full buffer length,
which caused truncation of the mac-address when read.
Previously, the mac-address was incorrectly truncated from
70:B3:D5:14:E9:0E to 00:00:70:B3:D5:14.
Fix the issue by swapping only the first 6 bytes to correctly pass the
mac-address to the upper layers.
Fixes: 13bcd440f2 ("nvmem: core: verify cell's raw_len")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250712181729.6495-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cdde91c14 upstream.
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cb ("thunderbolt: Convert DP adapter register names to follow the USB4 spec")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58d71d4242 upstream.
commit 1a760d10de ("thunderbolt: Fix a logic error in wake on connect")
fixated on the USB4 port sysfs wakeup file not working properly to control
policy, but it had an unintended side effect that the sysfs file controls
policy both at runtime and at suspend time. The sysfs file is supposed to
only control behavior while system is suspended.
Pass whether programming a port for runtime into usb4_switch_set_wake()
and if runtime then ignore the value in the sysfs file.
Cc: stable@vger.kernel.org
Reported-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Tested-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Fixes: 1a760d10de ("thunderbolt: Fix a logic error in wake on connect")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aae87fe7f upstream.
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde5 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c870cbbd71 upstream.
If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.
Fixes: bb8822cbbc ("i2c: i2c-stm32: Add generic DMA API")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-1-84a095a2c728@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3014168731 upstream.
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately.
Signed-off-by: Xinyu Liu <katieeliu@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/tencent_B1C9481688D0E95E7362AB2E999DE8048207@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5724ff190b upstream.
For UTMI+ PHY, according to programming guide, first should be set
PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues
Remote Wakeup, then host notices disconnect instead.
For ULPI PHY, above mentioned bits must be set in reversed order:
STOPPCLK then PMUACTV.
Fixes: 4483ef3c16 ("usb: dwc2: Add hibernation updates for ULPI PHY")
Cc: stable <stable@kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/692110d3c3d9bb2a91cedf24528a7710adc55452.1751881374.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67a59f8219 upstream.
When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with
echo "" > /sys/kernel/config/usb_gadget/<your_gadget>/UDC,
/sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED.
Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED.
Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop
to fix both cases.
Fixes: 49401f4169 ("usb: gadget: introduce gadget state tracking")
Cc: stable@vger.kernel.org
Co-authored-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com>
Signed-off-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com>
Signed-off-by: Drew Hamilton <drew.hamilton@zetier.com>
Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c980666b69 upstream.
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24c63c590a upstream.
The logic that drives the pad calibration values resides in the
controller reset domain and so the calibration values are only being
captured when the controller is out of reset. However, by clearing the
CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set
while the controller is in reset.
The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the
trk_hw_mode flag, but this dependency is not necessary. Instead,
introduce a new flag, trk_update_on_idle, to independently control this
bit.
Fixes: d8163a32ca ("phy: tegra: xusb: Add Tegra234 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250519090929.3132456-2-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cefc1caee9 upstream.
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode.
Fixes: 49d46e3c7e ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VERW_CLEAR is supposed to be set only by the hypervisor to denote TSA
mitigation support to a guest. SQ_NO and L1_NO are both synthesizable,
and are going to be set by hw CPUID on future machines.
So keep the kvm_cpu_cap_init_kvm_defined() invocation *and* set them
when synthesized.
This fix is stable-only.
Co-developed-by: Jinpu Wang <jinpu.wang@ionos.com>
Signed-off-by: Jinpu Wang <jinpu.wang@ionos.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd881d0a08 upstream.
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250306211223.109455-1-mjeanson@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b16510a530 upstream.
Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa
implementation's ->key_size() callback returns an unusually large value.
Herbert instead suggests (for a division by 8):
X / 8 + !!(X & 7)
Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and
use it in lieu of DIV_ROUND_UP() for ->key_size() return values.
Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes"
parameter is a ->key_size() return value in some instances, or a
user-specified ASN.1 length in the case of ecdsa_get_signature_rs().
Link: https://lore.kernel.org/r/Z3iElsILmoSu6FuC@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a75ad2fc76 upstream.
We have a number of hwcaps for various SME subfeatures enumerated via
ID_AA64SMFR0_EL1. Currently we advertise these without cross checking
against the main SME feature, advertised in ID_AA64PFR1_EL1.SME which
means that if the two are out of sync userspace can see a confusing
situation where SME subfeatures are advertised without the base SME
hwcap. This can be readily triggered by using the arm64.nosme override
which only masks out ID_AA64PFR1_EL1.SME, and there have also been
reports of VMMs which do the same thing.
Fix this as we did previously for SVE in 064737920b ("arm64: Filter
out SVE hwcaps when FEAT_SVE isn't implemented") by filtering out the
SME subfeature hwcaps when FEAT_SME is not present.
Fixes: 5e64b862c4 ("arm64/sme: Basic enumeration support")
Reported-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250620-arm64-sme-filter-hwcaps-v1-1-02b9d3c2d8ef@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50f930db22 upstream.
If ksmbd_iov_pin_rsp return error, use-after-free can happen by
accessing opinfo->state and opinfo_put and ksmbd_fd_put could
called twice.
Reported-by: Ziyan Xu <research@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e37546ad1f upstream.
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b10a1e5643 upstream.
There may still exist some pcluster with valid reference counts
during unmounting. Instead of introducing another synchronization
primitive, just try again as unmounting is relatively rare. This
approach is similar to z_erofs_cache_invalidate_folio().
It was also reported by syzbot as a UAF due to commit f5ad9f9a60
("erofs: free pclusters if no cached folio is attached"):
BUG: KASAN: slab-use-after-free in do_raw_spin_trylock+0x72/0x1f0 kernel/locking/spinlock_debug.c:123
..
queued_spin_trylock include/asm-generic/qspinlock.h:92 [inline]
do_raw_spin_trylock+0x72/0x1f0 kernel/locking/spinlock_debug.c:123
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x20/0x80 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:361 [inline]
z_erofs_put_pcluster fs/erofs/zdata.c:959 [inline]
z_erofs_decompress_pcluster fs/erofs/zdata.c:1403 [inline]
z_erofs_decompress_queue+0x3798/0x3ef0 fs/erofs/zdata.c:1425
z_erofs_decompressqueue_work+0x99/0xe0 fs/erofs/zdata.c:1437
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa68/0x1840 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
However, it seems a long outstanding memory leak. Fix it now.
Fixes: f5ad9f9a60 ("erofs: free pclusters if no cached folio is attached")
Reported-by: syzbot+7ff87b095e7ca0c5ac39@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/674c1235.050a0220.ad585.0032.GAE@google.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241203072821.1885740-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e9388f798 upstream.
The below commit that updated BPF_MAP_TYPE_LRU_HASH free target,
also updated tools/testing/selftests/bpf/test_lru_map to match.
But that missed one case that passes with 4 cores, but fails at
higher cpu counts.
Update test_lru_sanity3 to also adjust its expectation of target_free.
This time tested with 1, 4, 16, 64 and 384 cpu count.
Fixes: d4adf1c9ee ("bpf: Adjust free target to avoid global starvation of LRU map")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a03810803 ]
Ensure we don't stall or panic the kernel when using bluetooth-connected
controllers. This was reported as an issue on android devices using
kernel 6.6 due to the resume hook which had been added for usb joycons.
First, set a new state value to JOYCON_CTLR_STATE_SUSPENDED in a
newly-added nintendo_hid_suspend. This makes sure we will not stall out
the kernel waiting for input reports during led classdev suspend. The
stalls could happen if connectivity is unreliable or lost to the
controller prior to suspend.
Second, since we lose connectivity during suspend, do not try
joycon_init() for bluetooth controllers in the nintendo_hid_resume path.
Tested via multiple suspend/resume flows when using the controller both
in USB and bluetooth modes.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54bae4c17c ]
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a8953f4f7 ]
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0eb1b6b0c ]
.rodata is implicitly included in the PT_DYNAMIC segment due to
inheriting the segment of the preceding .dynamic section (in both GNU ld
and LLD). When the .rodata section's size is not a multiple of 16
bytes on riscv64, llvm-readelf will report a "PT_DYNAMIC dynamic table
is invalid" warning. Note: in the presence of the .dynamic section, GNU
readelf and llvm-readelf's -d option decodes the dynamic section using
the section.
This issue arose after commit 8f8c1ff879
("riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr"), which
placed .rodata directly after .dynamic by removing .eh_frame.
This patch resolves the implicit inclusion into PT_DYNAMIC by explicitly
specifying the :text output section phdr.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2093
Signed-off-by: Fangrui Song <i@maskray.me>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250602-riscv-vdso-v1-1-0620cf63cff0@maskray.me
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4adf1c9ee ]
BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the
map is full, due to percpu reservations and force shrink before
neighbor stealing. Once a CPU is unable to borrow from the global map,
it will once steal one elem from a neighbor and after that each time
flush this one element to the global list and immediately recycle it.
Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map
with 79 CPUs. CPU 79 will observe this behavior even while its
neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%).
CPUs need not be active concurrently. The issue can appear with
affinity migration, e.g., irqbalance. Each CPU can reserve and then
hold onto its 128 elements indefinitely.
Avoid global list exhaustion by limiting aggregate percpu caches to
half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count.
This change has no effect on sufficiently large tables.
Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable
lru->free_target. The extra field fits in a hole in struct bpf_lru.
The cacheline is already warm where read in the hot path. The field is
only accessed with the lru lock held.
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff78538e07 ]
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1961d20f6f ]
When building the free space tree with the block group tree feature
enabled, we can hit an assertion failure like this:
BTRFS info (device loop0 state M): rebuilding free space tree
assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1102!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Modules linked in:
CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
sp : ffff8000a4ce7600
x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8
x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001
x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160
x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0
x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00
x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0
x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e
Call trace:
populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P)
btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337
btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074
btrfs_remount_rw fs/btrfs/super.c:1319 [inline]
btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543
reconfigure_super+0x1d4/0x6f0 fs/super.c:1083
do_remount fs/namespace.c:3365 [inline]
path_mount+0xb34/0xde0 fs/namespace.c:4200
do_mount fs/namespace.c:4221 [inline]
__do_sys_mount fs/namespace.c:4432 [inline]
__se_sys_mount fs/namespace.c:4409 [inline]
__arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Code: f0047182 91178042 528089c3 9771d47b (d4210000)
---[ end trace 0000000000000000 ]---
This happens because we are processing an empty block group, which has
no extents allocated from it, there are no items for this block group,
including the block group item since block group items are stored in a
dedicated tree when using the block group tree feature. It also means
this is the block group with the highest start offset, so there are no
higher keys in the extent root, hence btrfs_search_slot_for_read()
returns 1 (no higher key found).
Fix this by asserting 'ret' is 0 only if the block group tree feature
is not enabled, in which case we should find a block group item for
the block group since it's stored in the extent root and block group
item keys are greater than extent item keys (the value for
BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and
BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively).
In case 'ret' is 1, we just need to add a record to the free space
tree which spans the whole block group, and we can achieve this by
making 'ret == 0' as the while loop's condition.
Reported-by: syzbot+36fae25c35159a763a2a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6841dca8.a00a0220.d4325.0020.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0fca6f2ce ]
MANA supports RDMA in PF mode. The driver should record the doorbell
physical address when in PF mode.
The doorbell physical address is used by the RDMA driver to map
doorbell pages of the device to user-mode applications through RDMA
verbs interface. In the past, they have been mapped to user-mode while
the device is in VF mode. With the support for PF mode implemented,
also expose those pages in PF mode.
Support for PF mode is implemented in
290e5d3c49 ("net: mana: Add support for Multi Vports on Bare metal")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1750210606-12167-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db0ff7e159 ]
Some modules have BT_EN enabled via a hardware pull-up,
meaning it is not defined in the DTS and is not controlled
through the power sequence. In such cases, fall through
to follow the legacy flow.
Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
