Currently a plain integer is being used to nullify the pointer
struct v3d_submit_ext *se. Use NULL instead. Cleans up sparse
warnings:
drivers/gpu/drm/v3d/v3d_gem.c:777:53: warning: Using plain integer as
NULL pointer
drivers/gpu/drm/v3d/v3d_gem.c:1010:45: warning: Using plain integer as
NULL pointer
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1634282081-72255-1-git-send-email-yang.lee@linux.alibaba.com
The Sony Tulip Truly NT35521 is a 5.24" 1280x720 DSI panel, which can
be found on Sony Xperia M4 Aqua phone. The backlight is managed
through DSI link.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809051008.6172-2-shawn.guo@linaro.org
Add a driver for panels using the Novatek NT35950 Display Driver IC,
including support for the Sharp LS055D1SX04, found in some Sony Xperia
Z5 Premium and XZ Premium smartphones.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-1-angelogioacchino.delregno@somainline.org
The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
with Static RAM for content retention in command mode and also supports
video mode with VESA Frame Buffer Compression or Display Stream Compression
on single, or dual dsi port(s).
This DDIC is also capable of upscaling an input image to the panel's native
resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
either bilinear interpolation or pixel duplication.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-2-angelogioacchino.delregno@somainline.org
Current code always sets reset line low in .pre_enable callback and
holds it low for 10ms. This is sub-optimal and increases the time
between enablement of the DSI83 and valid LVDS clock.
Rework the reset handling such that the reset line is held low for 10ms
both in probe() of the driver and .disable callback, which guarantees
that the reset line was always held low for more than 10ms and therefore
the reset line timing requirement is satisfied. Furthermore, move the
reset handling into .enable callback so the entire DSI83 initialization
is now in one place.
This reduces DSI83 enablement delay by up to 10ms.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210402.171595-1-marex@denx.de
W552946ABA is a panel by Wanchanglong. This panel utilizes the
Ilitek ILI9881D controller.
Add this panel's initialzation sequence and timing to ILI9881D driver.
Tested on px30-evb v11
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016102232.202119-3-michael@amarulasolutions.com
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095693-4428-1-git-send-email-wangqing@vivo.com
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095680-4377-1-git-send-email-wangqing@vivo.com
This patch adds support for Newhaven's NHD-1.8-128160EF display, featuring
an Ilitek ILI9163 controller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015150131.1020878-3-daniel@zonque.org
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/gpu/drm/panel/panel-dsi-cm.c:251: WARNING: use scnprintf or sprintf.
drivers/gpu/drm/panel/panel-dsi-cm.c:271: WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634280490-4429-1-git-send-email-wangqing@vivo.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104658.11834-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104650.11781-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104642.11728-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104635.11675-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104627.11622-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104620.11569-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104612.11516-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104247.11270-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104240.11217-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104232.11164-1-caihuoqing@baidu.com
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916104225.11111-1-caihuoqing@baidu.com
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.
Fixes: 14c8f2e9f8 ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
I got a null-ptr-deref report:
[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
kasan_report.cold+0x64/0xdb
__asan_load8+0x69/0x90
iput+0x3c/0x4a0
drm_dev_init_release+0x39/0xb0 [drm]
drm_managed_release+0x158/0x2d0 [drm]
drm_dev_init+0x3a7/0x4c0 [drm]
__devm_drm_dev_alloc+0x55/0xd0 [drm]
mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
spi_probe+0xeb/0x130
...
entry_SYSCALL_64_after_hwframe+0x44/0xae
If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.
drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode
Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.
Fixes: 2cbf7fc671 ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013114139.4042207-1-wanghai38@huawei.com
The model and make of the LCD panel of the Vivax TPC-9150 is unknown,
hence the panel settings that were retrieved with a FEX dump are named
after the device NOT the actual panel.
The LCD in question is a 50 pin MISO TFT LCD panel of the resolution
1024x600 used by the aforementioned device.
Version 2, as Thierry kindly suggested that I fix the order in which the
panel was ordered compared to others.
Version 3, filling in the required info suggested by Sam. Plus some
factual issues that I've corrected myself (tested working)
Version 4, rearranged the display parameters and fix invalid bit format
issue. (Thanks Sam)
Version 5, referred to FEX file instead of manual debugging for
information.
Version 6, same as above. This time, it'll be documented.
A bit of context first: I experimented with this a long time ago whilst
I was first learning how to get Linux running on Allwinner boards, I
didn't have many resources at hand so this was quite slow. Anyways, I
stumbled upon this guide (https://linux-sunxi.org/LCD) and was reading
about how to setup the LCD for my tablet. Since I was able to make a
proper FEX dump, I was also able to read the correct parameters for
myself without relying on leaked documents or part numbers and whatnot.
In the FEX dump the value lcd_frm IS SET to 1, which means, at least
according to the document, that this display is INDEED an 18 bit per
pixel panel. Compiling U-Boot and seeing the tux in proper colors
confirmed this. As per Sam Ravnborg's suggestion, I've changed the panel
to his format "MEDIA_BUS_FMT_RGB666_1X7X3_SPWG", however this does not
lead to any actual change in regards to the functionality since the sunxi
panel driver just ignores this value. However, hopefully this clears up
any errors down the road as either the driver becomes advanced enough to
not ignore this value or that some other piece of software relies on
this value being known. PS: Apologies to the maintainers that have to
endure my misjudgement about how these things work.
As for the concerns about a single patch series, I wasn't sure where to
send the patches as they clearly aren't dt-bindings related and my
previous patches have ended up in drm-misc-fixes anyway. So I'm guessing
I'll be fine if I just post them in the list from last time???
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011212731.77763-1-pavlica.nikola@gmail.com
Add helper function to convert DT "data-mapping" property string value
into media bus format value, and deduplicate the code in panel-lvds.c
and lvds-codec.c .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012224252.29185-1-marex@denx.de
The "label" pointer is used for debug output. The code assumes that it
is either NULL or valid, but it is never set to NULL. It is either
valid or uninitialized.
Fixes: 0c275c3017 ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Add compatible and timings for the Innolux G070Y2-T02 panel. It is 7"
WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit.
Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014095202.16716-2-o.rempel@pengutronix.de
Fix the following fallthrough warnings:
drivers/video/fbdev/omap/omapfb_main.c:1558:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case 0:
^
drivers/video/fbdev/omap/omapfb_main.c:1558:2: note: insert 'break;' to avoid fall-through
case 0:
^
break;
1 warning generated.
This helps with the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/lkml/202110141005.hUjaYMEi-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014165320.GA1145571@embeddedor
Register a privacy-screen device on laptops with a privacy-screen,
this exports the PrivacyGuard features to user-space using a
standardized vendor-agnostic sysfs interface. Note the sysfs interface
is read-only.
Registering a privacy-screen device with the new privacy-screen class
code will also allow the GPU driver to get a handle to it and export
the privacy-screen setting as a property on the DRM connector object
for the LCD panel. This DRM connector property is a new standardized
interface which all user-space code should use to query and control
the privacy-screen.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-9-hdegoede@redhat.com
Get the privacy-screen / lcdshadow ACPI handles once and cache them,
instead of retrieving them every time we need them.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-8-hdegoede@redhat.com
Factor the extended hotkey handling out of hotkey_notify_hotkey() and
into a new hotkey_notify_extended_hotkey() helper.
This is a preparation patch for adding support the privacy-screen hotkey
toggle (which needs some special handling, it should NOT send an evdev
key-event to userspace...).
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-7-hdegoede@redhat.com
Add 2 drm_connector privacy-screen helper functions:
1. drm_connector_attach_privacy_screen_provider(), this function creates
and attaches the standard privacy-screen properties and registers a
generic notifier for generating sysfs-connector-status-events on external
changes to the privacy-screen status.
2. drm_connector_update_privacy_screen(), update the privacy-screen's
sw_state if the connector has a privacy-screen.
Changes in v2:
- Do not update connector->state->privacy_screen_sw_state on
atomic-commits.
- Change drm_connector_update_privacy_screen() to take drm_connector_state
as argument instead of a full drm_atomic_state. This allows the helper
to be called by drivers when they are enabling crtcs/encoders/connectors.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-6-hdegoede@redhat.com
Add support for privacy-screen consumers to register a notifier to
be notified of external (e.g. done by the hw itself on a hotkey press)
state changes.
Changes in v2:
- Drop WARN_ON(mutex_is_locked(&priv->lock)) check in
drm_privacy_screen_call_notifier_chain() it may be locked by
another thread, which would lead to a false-positive triggering
of the check
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-5-hdegoede@redhat.com
Add X86 specific arch init code, which fills the privacy-screen lookup
table by checking for various vendor specific ACPI interfaces for
controlling the privacy-screen.
This initial version only checks for the Lenovo Thinkpad specific ACPI
methods for privacy-screen control.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-4-hdegoede@redhat.com
