[ Upstream commit 36a3200575 ]
During nft_synproxy eval we are reading nf_synproxy_info struct which
can be modified on update operation concurrently. As nf_synproxy_info
struct fits in 32 bits, use READ_ONCE/WRITE_ONCE annotations.
Fixes: ee394f96ad ("netfilter: nft_synproxy: add synproxy stateful object support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7711f4bb4b ]
set->klen has to be used, not sizeof(). The latter only compares a
single register but a full check of the entire key is needed.
Example:
table ip t {
map s {
typeof iifname . ip saddr : verdict
flags interval
}
}
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/8 : drop }' # bug: no error
The 3rd 'add element' should be rejected via -ENOTEMPTY, not -EEXIST,
so userspace / nft can report an error to the user.
The latter is only correct for the 2nd case (re-add of existing element).
As-is, userspace is told that the command was successful, but no elements were
added.
After this patch, 3rd command gives:
Error: Could not process rule: File exists
add element t s { "lo" . 127.0.0.0/8 . "lo" : drop }
^^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: 0eb4b5ee33 ("netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a988caeed9 ]
The commit 616effc027 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.
The commit 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.
Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.
Fixes: 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c63749a7dd ]
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.
This follows the matching PHY driver recommendation described in commit
bedd8d78ab ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf4e631ee ]
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the
address for it in eth_mac1, eth_mac2 seems to be left unfused. In their
downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias
of eqos to ethernet0, the driver then fetches the mac address based on
the alias number.
Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to
point at eth_mac2 as it may be fused later even though it is disabled
by default.
With this changed barebox is now capable of loading the correct address.
Link: 3805432784/drivers/net/dwc_eth_qos.c (L1167) [1]
Link: 3805432784/arch/arm/dts/imx8mp-karo.dtsi (L12) [2]
Fixes: bac63d7c5f ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 056c688751 ]
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 03f07be54c ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6a4eedd49 ]
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef4 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca643894a3 ]
For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.
To match such requirement on imx8qm-mek board, add 4.8ms delay between
sd power off and power on.
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0d8678c2f ]
light sensor isl29023 share the interrupt with lsm303arg, but these
two devices use different interrupt type. According to the datasheet
of these two devides, both support low level trigger type, so correct
the interrupt type here to avoid the following error log:
irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000!
Fixes: 9918092cbb ("arm64: dts: imx8qm-mek: add i2c0 and children devices")
Fixes: 1d8a9f043a ("arm64: dts: imx8: use defines for interrupts")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961ac9d97b ]
The restarting message from PF to VF is sent twice during AER error
handling: once from adf_error_detected() and again from
adf_disable_sriov().
This causes userspace subservices to shutdown unexpectedly when they
receive a duplicate restarting message after already being restarted.
Avoid calling adf_pf2vf_notify_restarting() and
adf_pf2vf_wait_for_restarting_complete() from adf_error_detected() so
that the restarting msg is sent only once from PF to VF.
Fixes: 9567d3dc76 ("crypto: qat - improve aer error reset handling")
Signed-off-by: Harshita Bhilwaria <harshita.bhilwaria@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Ravikumar PM <ravikumar.pm@intel.com>
Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa917d3d57 ]
In mt8189-pinctrl driver, a previous commit changed the register base
name array (mt8189_pinctrl_register_base_names) entry name and order to
align it with the same name and order as the "mediatek,mt8189-pinctrl"
devicetree bindings. The new order (by ascending register address) now
causes an issue with MT8189 pinctrl configuration.
MT8189 SoC has multiple base addresses for the pin configuration
registers. Several constant data structures, declaring each pin
configuration, are using PIN_FIELD_BASE() macro which i_base parameter
indicates for a given pin the lookup index in the base register address
array of the driver internal data for the configuration register
read/write accesses. But in practice, this parameter is given a
hardcoded numerical value that corresponds to the expected base
register entry index in mt8189_pinctrl_register_base_names array.
Since this array reordering, the i_base index matching is no more
correct.
So, in order to avoid modifying over a thousand of PIN_FIELD_BASE()
calls, restore previous mt8189_pinctrl_register_base_names entry order.
Fixes: 518919276c ("pinctrl: mediatek: mt8189: align register base names to dt-bindings ones")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 570ad253a3 ]
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread.
Reported-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Link: https://lore.kernel.org/r/8622834.T7Z3S40VBb@weasel/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/938162.1766233900@warthog.procyon.org.uk
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Tested-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e13150c1a ]
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Save the number of entries in struct thc_dma_configuration.
Fixes: a688404b2e ("HID: intel-thc-hid: intel-thc: Add THC DMA interfaces")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3352e73a ]
RUST_FW_LOADER_ABSTRACTIONS was depended on by NOVA_CORE, but NOVA_CORE
is selected by DRM_NOVA. This creates a situation where, if DRM_NOVA is
selected, NOVA_CORE gets enabled but not RUST_FW_LOADER_ABSTRACTIONS,
which results in a build error.
Since the firmware loader is an implementation detail of the driver, it
should be enabled along with it, so change the "depends on" to a
"select".
Fixes: 54e6baf123 ("gpu: nova-core: add initial driver stub")
Closes: https://lore.kernel.org/oe-kbuild-all/202512061721.rxKGnt5q-lkp@intel.com/
Tested-by: Alyssa Ross <hi@alyssa.is>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-2-771172257755@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235a1eb8d2 ]
In unittest_data_add(), if of_resolve_phandles() fails, the allocated
unittest_data is not freed, leading to a memory leak.
Fix this by using scope-based cleanup helper __free(kfree) for automatic
resource cleanup. This ensures unittest_data is automatically freed when
it goes out of scope in error paths.
For the success path, use retain_and_null_ptr() to transfer ownership
of the memory to the device tree and prevent double freeing.
Fixes: 2eb46da2a7 ("of/selftest: Use the resolver to fixup phandles")
Suggested-by: Rob Herring <robh@kernel.org>
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251231114915.234638-1-zilin@seu.edu.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f59076a1 ]
Previously, btrfs_get_or_create_delayed_node() set the delayed_node's
refcount before acquiring the root->delayed_nodes lock.
Commit e8513c012d ("btrfs: implement ref_tracker for delayed_nodes")
moved refcount_set inside the critical section, which means there is
no longer a memory barrier between setting the refcount and setting
btrfs_inode->delayed_node.
Without that barrier, the stores to node->refs and
btrfs_inode->delayed_node may become visible out of order. Another
thread can then read btrfs_inode->delayed_node and attempt to
increment a refcount that hasn't been set yet, leading to a
refcounting bug and a use-after-free warning.
The fix is to move refcount_set back to where it was to take
advantage of the implicit memory barrier provided by lock
acquisition.
Because the allocations now happen outside of the lock's critical
section, they can use GFP_NOFS instead of GFP_ATOMIC.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511262228.6dda231e-lkp@intel.com
Fixes: e8513c012d ("btrfs: implement ref_tracker for delayed_nodes")
Tested-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f157dd6613 ]
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a13 ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68d4b3fa18 ]
[BUG]
There is a bug that if a subvolume has multi-level parent qgroups, and
is able to do a quick inherit, only the direct parent qgroup got
updated:
mkfs.btrfs -f -O quota $dev
mount $dev $mnt
btrfs subv create $mnt/subv1
btrfs qgroup create 1/100 $mnt
btrfs qgroup create 2/100 $mnt
btrfs qgroup assign 1/100 2/100 $mnt
btrfs qgroup assign 0/256 1/100 $mnt
btrfs qgroup show -p --sync $mnt
Qgroupid Referenced Exclusive Parent Path
-------- ---------- --------- ------ ----
0/5 16.00KiB 16.00KiB - <toplevel>
0/256 16.00KiB 16.00KiB 1/100 subv1
1/100 16.00KiB 16.00KiB 2/100 2/100<1 member qgroup>
2/100 16.00KiB 16.00KiB - <0 member qgroups>
btrfs subv snap -i 1/100 $mnt/subv1 $mnt/snap1
btrfs qgroup show -p --sync $mnt
Qgroupid Referenced Exclusive Parent Path
-------- ---------- --------- ------ ----
0/5 16.00KiB 16.00KiB - <toplevel>
0/256 16.00KiB 16.00KiB 1/100 subv1
0/257 16.00KiB 16.00KiB 1/100 snap1
1/100 32.00KiB 32.00KiB 2/100 2/100<1 member qgroup>
2/100 16.00KiB 16.00KiB - <0 member qgroups>
# Note that 2/100 is not updated, and qgroup numbers are inconsistent
umount $mnt
[CAUSE]
If the snapshot source subvolume belongs to a parent qgroup, and the new
snapshot target is also added to the new same parent qgroup, we allow a
quick update without marking qgroup inconsistent.
But that quick update only update the parent qgroup, without checking if
there is any more parent qgroups.
[FIX]
Iterate through all parent qgroups during the quick inherit.
Reported-by: Boris Burkov <boris@bur.io>
Fixes: b20fe56cd2 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ee19a59a7 ]
qgroup_snapshot_quick_inherit() detects conditions where the snapshot
destination would land in the same parent qgroup as the snapshot source
subvolume. In this case we can avoid costly qgroup calculations and just
add the nodesize of the new snapshot to the parent.
However, in the case of squotas this is actually a double count, and
also an undercount for deeper qgroup nestings.
The following annotated script shows the issue:
btrfs quota enable --simple "$mnt"
# Create 2-level qgroup hierarchy
btrfs qgroup create 2/100 "$mnt" # Q2 (level 2)
btrfs qgroup create 1/100 "$mnt" # Q1 (level 1)
btrfs qgroup assign 1/100 2/100 "$mnt"
# Create base subvolume
btrfs subvolume create "$mnt/base" >/dev/null
base_id=$(btrfs subvolume show "$mnt/base" | grep 'Subvolume ID:' | awk '{print $3}')
# Create intermediate snapshot and add to Q1
btrfs subvolume snapshot "$mnt/base" "$mnt/intermediate" >/dev/null
inter_id=$(btrfs subvolume show "$mnt/intermediate" | grep 'Subvolume ID:' | awk '{print $3}')
btrfs qgroup assign "0/$inter_id" 1/100 "$mnt"
# Create working snapshot with --inherit (auto-adds to Q1)
# src=intermediate (in only Q1)
# dst=snap (inheriting only into Q1)
# This double counts the 16k nodesize of the snapshot in Q1, and
# undercounts it in Q2.
btrfs subvolume snapshot -i 1/100 "$mnt/intermediate" "$mnt/snap" >/dev/null
snap_id=$(btrfs subvolume show "$mnt/snap" | grep 'Subvolume ID:' | awk '{print $3}')
# Fully complete snapshot creation
sync
# Delete working snapshot
# Q1 and Q2 will lose the full snap usage
btrfs subvolume delete "$mnt/snap" >/dev/null
# Delete intermediate and remove from Q1
# Q1 and Q2 will lose the full intermediate usage
btrfs qgroup remove "0/$inter_id" 1/100 "$mnt"
btrfs subvolume delete "$mnt/intermediate" >/dev/null
# Q1 should be at 0, but still has 16k. Q2 is "correct" at 0 (for now...)
# Trigger cleaner, wait for deletions
mount -o remount,sync=1 "$mnt"
btrfs subvolume sync "$mnt" "$snap_id"
btrfs subvolume sync "$mnt" "$inter_id"
# Remove Q1 from Q2
# Frees 16k more from Q2, underflowing it to 16EiB
btrfs qgroup remove 1/100 2/100 "$mnt"
# And show the bad state:
btrfs qgroup show -pc "$mnt"
Qgroupid Referenced Exclusive Parent Child Path
-------- ---------- --------- ------ ----- ----
0/5 16.00KiB 16.00KiB - - <toplevel>
0/256 16.00KiB 16.00KiB - - base
1/100 16.00KiB 16.00KiB - - <0 member qgroups>
2/100 16.00EiB 16.00EiB - - <0 member qgroups>
Fix this by simply not doing this quick inheritance with squotas.
I suspect that it is also wrong in normal qgroups to not recurse up the
qgroup tree in the quick inherit case, though other consistency checks
will likely fix it anyway.
Fixes: b20fe56cd2 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278712d20b ]
This reverts commit ab2068a6fb.
When probing the exp-attached sata device, libsas/libata will issue a
hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a
broadcast event will be received after the disk probe fails, and this
commit causes the probe will be re-executed on the disk, and a faulty
disk may get into an indefinite loop of probe.
Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4bb6daf4a ]
When a W-LUN resume fails, its parent devices in the SCSI hierarchy,
including the scsi_target, may be runtime suspended. Subsequently, the
error handler in ufshcd_recover_pm_error() fails to set the W-LUN device
back to active because the parent target is not active. This results in
the following errors:
google-ufshcd 3c2d0000.ufs: ufshcd_err_handler started; HBA state eh_fatal; ...
ufs_device_wlun 0:0:0:49488: START_STOP failed for power mode: 1, result 40000
ufs_device_wlun 0:0:0:49488: ufshcd_wl_runtime_resume failed: -5
...
ufs_device_wlun 0:0:0:49488: runtime PM trying to activate child device 0:0:0:49488 but parent (target0:0:0) is not active
Address this by:
1. Ensuring the W-LUN's parent scsi_target is runtime resumed before
attempting to set the W-LUN to active within
ufshcd_recover_pm_error().
2. Explicitly checking for power.runtime_error on the HBA and W-LUN
devices before calling pm_runtime_set_active() to clear the error
state.
3. Adding pm_runtime_get_sync(hba->dev) in
ufshcd_err_handling_prepare() to ensure the HBA itself is active
during error recovery, even if a child device resume failed.
These changes ensure the device power states are managed correctly
during error recovery.
Signed-off-by: Brian Kao <powenkao@google.com>
Tested-by: Brian Kao <powenkao@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251112063214.1195761-1-powenkao@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1237c203f ]
This was reported by the KUnit tests in the later patches.
See MS-ERREF 2.3.1 STATUS_NO_DATA_DETECTED. Keep it consistent with the
value in the documentation.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2b50fca34 ]
This was reported by the KUnit tests in the later patches.
See MS-ERREF 2.3.1 STATUS_DEVICE_DOOR_OPEN. Keep it consistent with the
value in the documentation.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f99caa895 ]
This was reported by the KUnit tests in the later patches.
See MS-ERREF 2.3.1 STATUS_UNABLE_TO_FREE_VM. Keep it consistent with the
value in the documentation.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7329417fc9 ]
On a 32-bit ARM system, the audio_decoder struct ends up being too large
for dp_retrain_link_dp_test.
link_dp_cts.c:157:1: error: the frame size of 1328 bytes is larger than
1280 bytes [-Werror=frame-larger-than=]
This is mitigated by shrinking the members of the struct and avoids
having to deal with dynamic allocation.
feed_back_divider is assigned but otherwise unused. Remove both.
pixel_repetition looks like it should be a bool since it's only ever
assigned to 1. But there are checks for 2 and 4. Reduce to uint8_t.
Remove ss_percentage_divider. Unused.
Shrink refresh_rate as it gets assigned to at most a 3 digit integer
value.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3849efdc78)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a8fc27dd ]
When automounting, the fs_context should be fixed up to use the cred
from the parent filesystem, since the operation is just extending the
namespace. Authorisation to enter that namespace will already have been
provided by the preceding lookup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57d508b5f7 ]
'version' is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
rockchip_pdm.c:583:17: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit 49a4a8d126 ("ASoC: rockchip: Fix
Wvoid-pointer-to-enum-cast warning") but then got bad in
commit 9958d85968 ("ASoC: Use device_get_match_data()").
Discussion on LKML also pointed out that 'uintptr_t' is not the correct
type and either 'kernel_ulong_t' or 'unsigned long' should be used,
with several arguments towards the latter [1].
Link: https://lore.kernel.org/r/CAMuHMdX7t=mabqFE5O-Cii3REMuyaePHmqX+j_mqyrn6XXzsoA@mail.gmail.com/ [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203141644.106459-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e47c3cc64 ]
We have observed an NFSv4 client receiving a LOCK reply with a status of
NFS4ERR_OLD_STATEID and subsequently retrying the LOCK request with an
earlier seqid value in the stateid. As this was for a new lockowner,
that would imply that nfs_set_open_stateid_locked() had updated the open
stateid seqid with an earlier value.
Looking at nfs_set_open_stateid_locked(), if the incoming seqid is out
of sequence, the task will sleep on the state->waitq for up to 5
seconds. If the task waits for the full 5 seconds, then after finishing
the wait it'll update the open stateid seqid with whatever value the
incoming seqid has. If there are multiple waiters in this scenario,
then the last one to perform said update may not be the one with the
highest seqid.
Add a check to ensure that the seqid can only be incremented, and add a
tracepoint to indicate when old seqids are skipped.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8581b19eb2 ]
There is reported 'scheduling while atomic' bug when using dm-snapshot on
real-time kernels. The reason for the bug is that the hlist_bl code does
preempt_disable() when taking the lock and the kernel attempts to take
other spinlocks while holding the hlist_bl lock.
Fix this by converting a hlist_bl spinlock into a regular spinlock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9f3e47d3f ]
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aeed90419 ]
Similar in nature to ab10727660. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fedadc4137 ]
gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.
The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.
Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().
[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 809ef03d6d ]
In the csky_cmpxchg_fixup function, it is incorrect to use the global
variable csky_cmpxchg_stw to determine the address where the exception
occurred.The global variable csky_cmpxchg_stw stores the opcode at the
time of the exception, while &csky_cmpxchg_stw shows the address where
the exception occurred.
Signed-off-by: Yang Li <yang.li85200@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 161a0c617a upstream.
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Cc: Askar Safin <safinaskar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 011af85ccd upstream.
Move ublk_add_tag_set() before ublk_init_queues() in the device
initialization path. This allows us to use the blk-mq CPU-to-queue
mapping established by the tag_set to determine the appropriate
NUMA node for each queue allocation.
The error handling paths are also reordered accordingly.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ Upstream commit 529d4d6327 ("ublk: implement NUMA-aware memory allocation")
is ported to linux-6.18.y, but it depends on commit 011af85ccd ("ublk:
reorder tag_set initialization before queue allocation"). kernel panic is
reported on 6.18.y: https://github.com/ublk-org/ublksrv/issues/174 ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0fe2994f9 upstream.
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11194b416e upstream.
When a fault occurs, the connection is abandoned, reestablished, and any
pending operations are retried. The OSD client tracks the progress of a
sparse-read reply using a separate state machine, largely independent of
the messenger's state.
If a connection is lost mid-payload or the sparse-read state machine
returns an error, the sparse-read state is not reset. The OSD client
will then interpret the beginning of a new reply as the continuation of
the old one. If this makes the sparse-read machinery enter a failure
state, it may never recover, producing loops like:
libceph: [0] got 0 extents
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
Therefore, reset the sparse-read state in osd_fault(), ensuring retries
start from a clean state.
Cc: stable@vger.kernel.org
Fixes: f628d79997 ("libceph: add sparse read support to OSD client")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e84b48d31b upstream.
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature().
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3fe30e576 upstream.
free_choose_arg_map() may dereference a NULL pointer if its caller fails
after a partial allocation.
For example, in decode_choose_args(), if allocation of arg_map->args
fails, execution jumps to the fail label and free_choose_arg_map() is
called. Since arg_map->size is updated to a non-zero value before memory
allocation, free_choose_arg_map() will iterate over arg_map->args and
dereference a NULL pointer.
To prevent this potential NULL pointer dereference and make
free_choose_arg_map() more resilient, add checks for pointers before
iterating.
Cc: stable@vger.kernel.org
Co-authored-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e00c3f71b5 upstream.
If the osdmap is (maliciously) corrupted such that the incremental
osdmap epoch is different from what is expected, there is no need to
BUG. Instead, just declare the incremental osdmap to be invalid.
Cc: stable@vger.kernel.org
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
