[ Upstream commit d6e6b9218c ]
It seems that many webcams have buggy firmware and don't expose the
mic capture volume with the proper resolution. We have workarounds in
mixer.c, but judging from the numbers, those can be better managed as
global quirk flags.
Link: https://patch.msgid.link/20241105120220.5740-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aacd14844 ]
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba9 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem.
Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com>
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe260df55 ]
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdd2768d7 ]
[Why]
1. HDMI does not have 6 bpc support. Having 6 bpc pass validation
does not comply with spec.
2. Validate 420 only for native HDMI, but not apply to pcon use
case.
3. Current mode validation log is not readable.
[how]
1. Cap 8 bpc for dp-hdmi converter.
2. Validate yuv420 for pcon use case as well,
if rgb/yuv444 8bpc cannot fit into pcon bw limitation of
the link from the converter to HDMI sink.
3. Add readable pixel_format and color_depth into debug log.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2551b4a321 ]
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4c8046284 ]
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b2d11e2d8 ]
Under CONFIG_PROVE_RCU_LIST + CONFIG_RCU_EXPERT
hlist_for_each_entry_rcu() provides very helpful splats, which help
to find possible issues. I missed CONFIG_RCU_EXPERT=y in my testing
config the same as described in
a3e4bf7f96 ("configs/debug: make sure PROVE_RCU_LIST=y takes effect").
The fix itself is trivial: add the very same lockdep annotations
as were used to dereference ao_info from the socket.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241028152645.35a8be66@kernel.org/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20241030-tcp-ao-hlist-lockdep-annotate-v1-1-bf641a64d7c6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd50c4125c ]
Cell-index value is obtained from Device Tree and then used to calculate
the index for accessing arrays port_mfl[], mac_mfl[] and intr_mng[].
In case of broken DT due to any error cell-index can contain any value
and it is possible to go beyond the array boundaries which can lead
at least to memory corruption.
Validate cell-index value obtained from Device Tree.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20241028065824.15452-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7543c3e3b9 ]
radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock
otherwise, there's a possible deadlock scenario when
dma debug API is called holding rq_lock():
CPU0 CPU1 CPU2
dma_free_attrs()
check_unmap() add_dma_entry() __schedule() //out
(A) rq_lock()
get_hash_bucket()
(A) dma_entry_hash
check_sync()
(A) radix_lock() (W) dma_entry_hash
dma_entry_free()
(W) radix_lock()
// CPU2's one
(W) rq_lock()
CPU1 situation can happen when it extending radix tree and
it tries to wake up kswapd via wake_all_kswapd().
CPU2 situation can happen while perf_event_task_sched_out()
(i.e. dma sync operation is called while deleting perf_event using
etm and etr tmc which are Arm Coresight hwtracing driver backends).
To remove this possible situation, call dma_entry_free() after
put_hash_bucket() in check_unmap().
Reported-by: Denis Nikitin <denik@chromium.org>
Closes: https://lists.linaro.org/archives/list/coresight@lists.linaro.org/thread/2WMS7BBSF5OZYB63VT44U5YWLFP5HL6U/#RWM6MLQX5ANBTEQ2PRM7OXCBGCE6NPWU
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 581c8cbfa9 ]
We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4007f07a47 ]
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f193fb888d ]
This patch adds support for the rt722 multi-function codec and the
rt1320 amplifier in the ARL board configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Link 2: RT1320 amplifier.
Note:
The Speaker endpoint on the RT722 codec is not used.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 358ee2c149 ]
When SKUs use the multi-function codec, which integrates
Headset, Amplifier and DMIC. The corresponding quirks provide
options to support internal amplifier/DMIC or not.
In the case of RT722, this SKU excludes the internal amplifier and
use an additional amplifier instead.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32e7ee293f ]
Need to dereference the atcs acpi buffer after
the method is executed, otherwise it will result in
a memory leak.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b22f04833 ]
Port this change to vega20_ih.c:
commit afbf7955ff ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9343b904e7 ]
This commit adds the cleaner shader microcode for GFX9.4.2 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_9_4_2_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
Also, this patch updates the `gfx_v9_0_sw_init` function to initialize
the cleaner shader if the MEC firmware version is 88 or higher. It sets
the `cleaner_shader_ptr` and `cleaner_shader_size` to the appropriate
values and attempts to initialize the cleaner shader.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This change ensures that the GPU memory is properly cleared between
different processes, preventing data leakage and enhancing security. It
also aligns with the serialization mechanism between KGD and KFD,
ensuring that the GPU state is consistent across different workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c437d9a0b ]
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2320c9e6a7 ]
drm_sched_job_init() has no control over how users allocate struct
drm_sched_job. Unfortunately, the function can also not set some struct
members such as job->sched.
This could theoretically lead to UB by users dereferencing the struct's
pointer members too early.
It is easier to debug such issues if these pointers are initialized to
NULL, so dereferencing them causes a NULL pointer exception.
Accordingly, drm_sched_entity_init() does precisely that and initializes
its struct with memset().
Initialize parameter "job" to 0 in drm_sched_job_init().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021105028.19794-2-pstanner@redhat.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d10f1a4e44 ]
Currently reset state configuration of split header works fine for
non-tagged packets and we see no corruption in payload of any size
We need additional programming sequence with reset configuration to
handle VLAN tagged packets to avoid corruption in payload for packets
of size greater than 256 bytes.
Without this change ping application complains about corruption
in payload when the size of the VLAN packet exceeds 256 bytes.
With this change tagged and non-tagged packets of any size works fine
and there is no corruption seen.
Current configuration which has the issue for VLAN packet
----------------------------------------------------------
Split happens at the position at Layer 3 header
|MAC-DA|MAC-SA|Vlan Tag|Ether type|IP header|IP data|Rest of the payload|
2 bytes ^
|
With the fix we are making sure that the split happens now at
Layer 2 which is end of ethernet header and start of IP payload
Ip traffic split
-----------------
Bits which take care of this are SPLM and SPLOFST
SPLM = Split mode is set to Layer 2
SPLOFST = These bits indicate the value of offset from the beginning
of Length/Type field at which header split should take place when the
appropriate SPLM is selected. Reset value is 2bytes.
Un-tagged data (without VLAN)
|MAC-DA|MAC-SA|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Tagged data (with VLAN)
|MAC-DA|MAC-SA|VLAN Tag|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Non-IP traffic split such AV packet
------------------------------------
Bits which take care of this are
SAVE = Split AV Enable
SAVO = Split AV Offset, similar to SPLOFST but this is for AVTP
packets.
|Preamble|MAC-DA|MAC-SA|VLAN tag|Ether type|IEEE 1722 payload|CRC|
2bytes ^
|
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016234313.3992214-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e515272338 ]
In case if g2h worker doesn't get opportunity to within specified
timeout delay then flush the g2h worker explicitly.
v2:
- Describe change in the comment and add TODO (Matt B/John H)
- Add xe_gt_warn on fence done after G2H flush (John H)
v3:
- Updated the comment with root cause
- Clean up xe_gt_warn message (John H)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1620
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2902
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017111410.2553784-2-badal.nilawar@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea657f6b24 ]
Add quirk to inform the machine driver to not bind in the cs42l43
microphone DAI link.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6f7afb393 ]
To support some systems using host microphones add a quirk to allow the
cs42l43 microphone DAI link to be ignored.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d9b44d097 ]
The system contains a mechanism for certain DAI links to be included
based on a quirk. Add support for certain DAI links to excluded based on
a quirk, this is useful in situations where the vast majority of SKUs
utilise a feature so it is easier to quirk on those that don't.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030344.13535-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6083f040d ]
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 522249f05c ]
When working in "fd mode", fanotify_read() needs to open an fd
from a dentry to report event->fd to userspace.
Opening an fd from dentry can fail for several reasons.
For example, when tasks are gone and we try to open their
/proc files or we try to open a WRONLY file like in sysfs
or when trying to open a file that was deleted on the
remote network server.
Add a new flag FAN_REPORT_FD_ERROR for fanotify_init().
For a group with FAN_REPORT_FD_ERROR, we will send the
event with the error instead of the open fd, otherwise
userspace may not get the error at all.
For an overflow event, we report -EBADF to avoid confusing FAN_NOFD
with -EPERM. Similarly for pidfd open errors we report either -ESRCH
or the open error instead of FAN_NOPIDFD and FAN_EPIDFD.
In any case, userspace will not know which file failed to
open, so add a debug print for further investigation.
Reported-by: Krishna Vivek Vitta <kvitta@microsoft.com>
Link: https://lore.kernel.org/linux-fsdevel/SI2P153MB07182F3424619EDDD1F393EED46D2@SI2P153MB0718.APCP153.PROD.OUTLOOK.COM/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241003142922.111539-1-amir73il@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ced9bb90 ]
Arcadyan made routers with this PCI ID containing an AR2417.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240930180716.139894-3-rosenp@gmail.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da04740124 ]
This is in two devices made by Gigaset, SX762 and SX763.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240930180716.139894-2-rosenp@gmail.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95c38953cb ]
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in ath10k_core_destroy(). This function will free
struct cfg80211_registered_device *rdev and all its members, including
wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio
workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON.
After device release, destroy_workqueue() will use NULL pointer then the
kernel panic happen.
Call trace:
ath10k_sdio_remove
->ath10k_core_unregister
……
->ath10k_core_stop
->ath10k_hif_stop
->ath10k_sdio_irq_disable
->ath10k_hif_power_down
->del_timer_sync(&ar_sdio->sleep_timer)
->ath10k_core_destroy
->ath10k_mac_destroy
->ieee80211_free_hw
->wiphy_free
……
->wiphy_dev_release
->destroy_workqueue
Need to call destroy_workqueue() before ath10k_core_destroy(), free
the work queue buffer first and then free pointer of work queue by
ath10k_core_destroy(). This order matches the error path order in
ath10k_sdio_probe().
No work will be queued on sdio workqueue between it is destroyed and
ath10k_core_destroy() is called. Based on the call_stack above, the
reason is:
Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and
ath10k_sdio_irq_disable() will queue work on sdio workqueue.
Sleep timer will be deleted before ath10k_core_destroy() in
ath10k_hif_power_down().
ath10k_sdio_irq_disable() only be called in ath10k_hif_stop().
ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif
bus, so ath10k_sdio_hif_tx_sg() won't be called anymore.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Tested-by: David Ruth <druth@chromium.org>
Reviewed-by: David Ruth <druth@chromium.org>
Link: https://patch.msgid.link/20241008022246.1010-1-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9df99c395d ]
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-8-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9365fa510c ]
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-7-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4fcd63f6e ]
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-6-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 811a7ca732 ]
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3945c799f1 ]
bt_sock_alloc() attaches allocated sk object to the provided sock object.
If rfcomm_dlc_alloc() fails, we release the sk object, but leave the
dangling pointer in the sock object, which may cause use-after-free.
Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-4-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c4f78cdb8 ]
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46f2a11cb8 ]
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-2-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 397006ba5d ]
The subsequent calculation of port_rate = speed * 1000 * BYTES_PER_KBIT,
where the BYTES_PER_KBIT is of type LL, may cause an overflow.
At least when speed = SPEED_20000, the expression to the left of port_rate
will be greater than INT_MAX.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Link: https://patch.msgid.link/20241013124529.1043-1-esalomatkina@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fe45fada ]
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c: In function 'fs_mii_bitbang_init':
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:126:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
126 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-2-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020bfdc4ed ]
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c: In function 'mpc52xx_fec_mdio_probe':
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c:97:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
97 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-1-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fe33e115f ]
[Why]
A race condition occurs between cursor movement and vertical interrupt control
thread from OS, with both threads trying to exit IPS2.
Vertical interrupt control thread clears the prev driver allow signal while not fully
finishing the IPS2 exit process.
[How]
We want to detect all the allow signals have been cleared before we perform the full exit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
