The ov5693 driver waits for the endpoint fwnode to show up in case this
fwnode is created by a bridge-driver.
It does this by returning -EPROBE_DEFER, but it does not use
dev_err_probe() so no reason for deferring gets registered.
After 30 seconds the kernel logs a warning that the probe is still
deferred, which looks like this:
[ 33.951709] i2c i2c-INT33BE:00: deferred probe pending: (reason unknown)
Use dev_err_probe() when returning -EPROBE_DEFER to register the probe
deferral reason changing the error to:
deferred probe pending: waiting for fwnode graph endpoint
Also update the comment to not refer to the no longer existing cio2-bridge
code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fix typos, punctuation and improve grammar and formatting in documentation
for Video4Linux (V4L).
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add INT33F0 ACPI HID for the Onsemi MT9M114 sensor to the list of supported
sensors. This sensor is found on the Asus T100TA using this HID.
Tested-by: Hans de Goede <hdegoede@redhat.com> # Asus T100TA with MT9M114
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Xiaomi Mi Pad 2 tablet uses a Toshiba T4KA3 sensor, using
a Xiaomi specific Hardware-ID of "XMMC0003" add this to the sensor-list
of the ipu-bridge code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove two variables in ov2740_init_control() that are used as a shorthand
for where the information is really located. Make the code more readable
by removing them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove Wentong's e-mail address from MODULE_AUTHOR() macro as the current
e-mail address is no longer valid.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Both the ACE and CSI driver are missing a mei_cldev_disable() call in
their remove() function.
This causes the mei_cl client to stay part of the mei_device->file_list
list even though its memory is freed by mei_cl_bus_dev_release() calling
kfree(cldev->cl).
This leads to a use-after-free when mei_vsc_remove() runs mei_stop()
which first removes all mei bus devices calling mei_ace_remove() and
mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls
mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing
the just freed cldev->cl.
And mei_vsc_remove() it self is run at shutdown because of the
platform_device_unregister(tp->pdev) in vsc_tp_shutdown()
When building a kernel with KASAN this leads to the following KASAN report:
[ 106.634504] ==================================================================
[ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1
[ 106.634729]
[ 106.634767] Tainted: [E]=UNSIGNED_MODULE
[ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025
[ 106.634773] Call Trace:
[ 106.634777] <TASK>
...
[ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
[ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei
[ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei
...
[ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei
[ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc
[ 106.635066] platform_remove (drivers/base/platform.c:1424)
Add the missing mei_cldev_disable() calls so that the mei_cl gets removed
from mei_device->file_list before it is freed to fix this.
Fixes: 78876f71b3 ("media: pci: intel: ivsc: Add ACE submodule")
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update the IMX258 binding to inherit properties defined in the
video-interface-devices binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update the OV8858 binding to inherit properties defined in the
video-interface-devices binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
v4l2_ctrl_handler_free() no longer resets the handler's error code.
Document it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
v4l2_ctrl_handler_free() used to return void but changing this to int,
returning the handler's error code, enables the drivers to simply return
the handler's error in this common error handling pattern:
if (handler->error)
return v4l2_ctrl_handler_free(handler);
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8 ("V4L/DVB: v4l2: Add new control handling framework")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Support two additional frequencies for the ov08x40 sensor using 2 lanes
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace storage of the active format in the cio2_queue structure with
usage of V4L2 subdev active state. This simplifies locking in the
driver, and drops usage of the deprecated subdev .open() internal
operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: keep fmt_default non-static to keep clang happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The OV5670 is found on Dell 7212 tablets paired with an IPU3 ISP
and needs to be connected by the ipu-bridge. Add it to the list
of supported devices.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Dell 7212 Rugged Extreme Tablet pairs an OV5670 sensor with the
Intel IPU3 ISP. The sensor is powered by a TPS68470 PMIC, and so we
need some board data to describe how to configure the GPIOs and
regulators to run the sensor.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The OV5670 is found on a Dell 7212, coupled to Intel's CIO2 CSI-2
receiver. The ACPI tables don't describe the connection properly and
so this is one of the sensors that needs to wait for the ipu-bridge
to set up the graph with software nodes. Defer probe if an endpoint
isn't found to allow time for that.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
reset_gpio needs to be an output and set to GPIOD_OUT_LOW, to ensure
lt6911uxe is in reset state during probe.
This issue was found on the onboard lt6911uxe, where the reset_pin was
not reset, causing the lt6911uxe to fail to probe.
Fixes: e49563c3be ("media: i2c: add lt6911uxe hdmi bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.
In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.
Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().
[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst
Fixes: 24d756e914 ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The function mt9m114_configure writes the configuration registers of both,
the pixel array (pa) and the image flow processor (ifp).
This is undesirable if only the config of the pa should be changed without
affecting the ifp.
Factor out the function mt9m114_configure_pa() that just writes the
pa-configuration.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The MT9M114 sensor has an internal PLL that generates the required SYSCLK
from EXTCLK. It also has the option to bypass the PLL and use EXTCLK
directly as SYSCLK.
The current driver implementation uses a hardcoded PLL configuration that
requires a specific EXTCLK frequency. Depending on the available clocks,
it can be desirable to use a different PLL configuration or to bypass it.
The link-frequency of the output bus (Parallel or MIPI-CSI) is configured
in the device tree.
Check if EXTCLK can be used as SYSCLK to achieve this link-frequency. If
yes, bypass the PLL.
Otherwise, (as before) check if EXTCLK and the default PLL configuration
provide the required SYSCLK to achieve the link-frequency. If yes, use the
PLL. If no, throw an error.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The MT9M114 supports the different slew rates (0 to 7) on the output pads.
At the moment, this is hardcoded to 7 (the fastest rate).
The user might want to change this values due to EMC requirements.
Add the 'slew-rate' property to the MT9M114 DT-bindings for selecting
the desired slew rate.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace my corporate email address by @gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Instead rely on the rate set on the clock (using assigned-clock-rates
etc.)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Deprecate the clock-frequency property in favor of assigned-clock-rates.
While at it, re-order properties according to coding style and fix the
link-frequency in the example. See commit acc294519f ("media: i2c:
imx214: Fix link frequency validation").
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Calculate PLL parameters based on clock frequency and link frequency.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move clock frequency related parameters out of the constant register
sequences, such that the hard coded external clock frequency can be
replaced by a variable in the upcoming patches.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Request the sensor clock without specifying a name so that the driver
behaves as described in the imx415 bindings.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add the missing link-frequency to the ipu_supported_sensors[] array's
Galaxy Core GC0310 entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this
two line warning is printed each time the pipeline is started. Reduce
this excessive logging by only warning once for the missing control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refer to video-interface-devices.yaml instead of documenting the common
properties here.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The driver is not using gpio_chip::of_xlate() callback and hence
the of_gpio_n_cells assignment is unused. Drop it.
With that done, remove unneeded OF dependency and extend compile
test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Switch to u64 arithmetic and use DIV_ROUND_CLOSEST_ULL() to avoid
the overflow.
buffer[i] is unsigned int and is limited by the lirc core to
IR_MAX_DURATION, which is 500000.
idata->freq is u32, which has a max value of 0xFFFFFFFF.
In the case where buffer[i] is 500000, idata->freq overflows the u32
multiplication for any values >= 8590.
0xFFFFFFFF / 500000 ~= 8589
By casting buffer[i] to u64, idata->freq can be any u32 value without
overflowing the multiplication.
0xFFFFFFFFFFFFFFFF / 500000 ~= 36893488147419 (> 4294967295)
The result of the final operation will fit back into the unsigned int
limits without any issues.
500000 * 0xFFFFFFFF / 1000000 = 0x80000000 (< 0xFFFFFFFF)
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Carrier frequency is currently unconstrained, allowing the SPI transfer
to be allocated and filled only for it to be later rejected by the SPI
controller since the frequency is too large.
Add a check to constrain the carrier frequency inside
ir_spi_set_tx_carrier().
Also, move the number of bits per pulse to a macro since it is not used
in multiple places.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace the static transmit buffer with a dynamically allocated one,
removing the limit imposed on the number of pulses to transmit.
Calculate the number of pulses for each duration in the received buffer
ahead of time, while also adding up the total pulses, to be able to
allocate a buffer that perfectly fits the total number of pulses, then
populate it.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503d ("media: controls: Validate H264 stateless controls")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add compatible strings "nxp,imx95-jpgdec" and "nxp,imx95-jpgenc", which
are backward compatible with "nxp,imx8qxp-jpgdec" and
"nxp,imx8qxp-jpegenc". i.MX95 just need one power domain which combine
wrap and all slots together. Reduce minItems of power-domains to 1 for
i.MX95 and keep the same restriction for others.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The 'used' and 'new' bitmaps are local to this function, so there is no
need to use atomic access because concurrency can not happen.
Use the non-atomic __set_bit() to save a few cycles.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add video_device_release() in label 'err_m2m' to release the memory
allocated by video_device_alloc() and prevent potential memory leaks.
Remove the reduntant code in label 'err_m2m'.
Fixes: a8ef0488cc ("media: imx: add csc/scaler mem2mem device")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On errors, the rkvdec chip self resets. This can clear the addresses
programmed in the iommu. This case is signaled by the
RKVDEC_SOFTRESET_RDY status bit.
Since the iommu framework does not have a restore functionality, and
as recommended by the iommu subsystem maintainers, this patch
restores the iommu programming by attaching and detaching an empty
domain, which will clear and restore the default domain.
Suggested-by: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The desired clock frequency was correctly set to 400MHz in the device tree
but was lowered by the driver to 300MHz breaking 4K 60Hz content playback.
Fix the issue by removing the driver call to clk_set_rate(), which reduce
the amount of board specific code.
Fixes: 003afda97c ("media: verisilicon: Enable AV1 decoder on rk3588")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If VPU supports untiled output, it actually supports several different
YUV 4:2:0 layouts, namely NV12, NV21, YUV420 and YVU420.
Add support for all of them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: add 'default' case to switch to fix warning with old compiler]
Convert fsl-vdoa.txt to yaml format.
Additional changes:
- Add irq.h and imx6qdl-clock.h in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Applications may set data_offset when it refers to an output queue. So
driver need to account for it when getting the start address of input
image in the plane.
Meanwhile the mxc-jpeg codec requires the address (plane address +
data_offset) to be 16-aligned.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For format H264 and HEVC, the firmware can report the parsed profile idc
and level idc to driver, these information may be useful.
Implement the H264 and HEVC profile and level control to report them.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for i.MX8QXP, which has a dedicated control and status register
(CSR) space. Enable obtaining the second register space and initializing
PHY and link settings accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250522-8qxp_camera-v5-10-d4be869fdb7e@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce `imx8mq_plat_data` along with enable/disable callback operations
to facilitate support for new chips. No functional changes.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250522-8qxp_camera-v5-9-d4be869fdb7e@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add compatible strings for i.MX8QM/i.MX8QXP platform. Remove
fsl,mipi-phy-gpr from required properties and add new reg space, since
i.MX8QM and i.MX8QXP use dedicate control and status register(csr) space.
Keep the same restriction for other compatible strings.
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250522-8qxp_camera-v5-8-d4be869fdb7e@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add compatibles and platform data for i.MX8QM and i.MX8QXP platforms.
i.MX8QM's IER register layout is difference with i.MX8QXP.
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250522-8qxp_camera-v5-7-d4be869fdb7e@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
