scrub_raid56_parity_stripe() allocates a bio with bio_alloc(), but
fails to release it on some error paths, leading to a potential
memory leak.
Add the missing bio_put() calls to properly drop the bio reference
in those error cases.
Fixes: 1009254bf2 ("btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging that a new name exists, we skip updating the inode's
last_log_commit field to prevent a later explicit fsync against the inode
from doing nothing (as updating last_log_commit makes btrfs_inode_in_log()
return true). We are detecting, at btrfs_log_inode(), that logging a new
name is happening by checking the logging mode is not LOG_INODE_EXISTS,
but that is not enough because we may log parent directories when logging
a new name of a file in LOG_INODE_ALL mode - we need to check that the
logging_new_name field of the log context too.
An example scenario where this results in an explicit fsync against a
directory not persisting changes to the directory is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/foo
$ sync
$ mkdir /mnt/dir
# Write some data to our file and fsync it.
$ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/foo
# Add a new link to our file. Since the file was logged before, we
# update it in the log tree by calling btrfs_log_new_name().
$ ln /mnt/foo /mnt/dir/bar
# fsync the root directory - we expect it to persist the dentry for
# the new directory "dir".
$ xfs_io -c "fsync" /mnt
<power fail>
After mounting the fs the entry for directory "dir" does not exists,
despite the explicit fsync on the root directory.
Here's why this happens:
1) When we fsync the file we log the inode, so that it's present in the
log tree;
2) When adding the new link we enter btrfs_log_new_name(), and since the
inode is in the log tree we proceed to updating the inode in the log
tree;
3) We first set the inode's last_unlink_trans to the current transaction
(early in btrfs_log_new_name());
4) We then eventually enter btrfs_log_inode_parent(), and after logging
the file's inode, we call btrfs_log_all_parents() because the inode's
last_unlink_trans matches the current transaction's ID (updated in the
previous step);
5) So btrfs_log_all_parents() logs the root directory by calling
btrfs_log_inode() for the root's inode with a log mode of LOG_INODE_ALL
so that new dentries are logged;
6) At btrfs_log_inode(), because the log mode is LOG_INODE_ALL, we
update root inode's last_log_commit to the last transaction that
changed the inode (->last_sub_trans field of the inode), which
corresponds to the current transaction's ID;
7) Then later when user space explicitly calls fsync against the root
directory, we enter btrfs_sync_file(), which calls skip_inode_logging()
and that returns true, since its call to btrfs_inode_in_log() returns
true and there are no ordered extents (it's a directory, never has
ordered extents). This results in btrfs_sync_file() returning without
syncing the log or committing the current transaction, so all the
updates we did when logging the new name, including logging the root
directory, are not persisted.
So fix this by but updating the inode's last_log_commit if we are sure
we are not logging a new name (if ctx->logging_new_name is false).
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/03c5d7ec-5b3d-49d1-95bc-8970a7f82d87@gmail.com/
Fixes: 130341be7f ("btrfs: always update the logged transaction when logging new names")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The stripe offset calculation in the zoned code for raid0 and raid10
wrongly uses map->stripe_size to calculate it. In fact, map->stripe_size is
the size of the device extent composing the block group, which always is
the zone_size on the zoned setup.
Fix it by using BTRFS_STRIPE_LEN and BTRFS_STRIPE_LEN_SHIFT. Also, optimize
the calculation a bit by doing the common calculation only once.
Fixes: c0d90a79e8 ("btrfs: zoned: fix alloc_offset calculation for partly conventional block groups")
CC: stable@vger.kernel.org # 6.17+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a block group contains both conventional zone and sequential zone, the
capacity of the block group is wrongly set to the block group's full
length. The capacity should be calculated in btrfs_load_block_group_* using
the last allocation offset.
Fixes: 568220fa96 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # v6.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
->nr_pages is int, it needs type extension before calculating the region
size.
Fixes: a90558b36c ("io_uring/memmap: helper for pinning region pages")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: style fixup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RP1 ethernet controller DT node contains a local-mac-address
property to pass the MAC address from the boot loader to the kernel. The
boot loader does not fill the MAC address as the ethernet0 alias is
missing. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251102111443.18206-1-laurent.pinchart@ideasonboard.com
Fixes: 43456fdfc0 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
In Raspberry Pi 5 DTS, the Ethernet clock rates must be assigned
as the default clock register values are not valid for the
Ethernet interface to function.
This can be done either in rp1_clocks node or in rp1_eth node.
Define the rates in rp1_eth node, as those clocks are 'leaf' clocks
used specifically by the Ethernet device only.
Fixes: 43456fdfc0 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251021135533.5517-1-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
xfs_select_open_zone_mru needs to pass XFS_ZONE_ALLOC_OK to
xfs_try_use_zone because we only want to tightly pack into zones of the
same or a compatible temperature instead of any available zone.
This got broken in commit 0301dae732 ("xfs: refactor hint based zone
allocation"), which failed to update this particular caller when
switching to an enum. xfs/638 sometimes, but not reliably fails due to
this change.
Fixes: 0301dae732 ("xfs: refactor hint based zone allocation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Drop the rtgrop reference when xfs_init_zone fails for a conventional
device.
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I think there are several things wrong with this function:
A) xfs_bmapi_write can return a much larger unwritten mapping than what
the caller asked for. We convert part of that range to written, but
return the entire written mapping to iomap even though that's
inaccurate.
B) The arguments to xfs_reflink_convert_cow_locked are wrong -- an
unwritten mapping could be *smaller* than the write range (or even
the hole range). In this case, we convert too much file range to
written state because we then return a smaller mapping to iomap.
C) It doesn't handle delalloc mappings. This I covered in the patch
that I already sent to the list.
D) Reassigning count_fsb to handle the hole means that if the second
cmap lookup attempt succeeds (due to racing with someone else) we
trim the mapping more than is strictly necessary. The changing
meaning of count_fsb makes this harder to notice.
E) The tracepoint is kinda wrong because @length is mutated. That makes
it harder to chase the data flows through this function because you
can't just grep on the pos/bytecount strings.
F) We don't actually check that the br_state = XFS_EXT_NORM assignment
is accurate, i.e that the cow fork actually contains a written
mapping for the range we're interested in
G) Somewhat inadequate documentation of why we need to xfs_trim_extent
so aggressively in this function.
H) Not sure why xfs_iomap_end_fsb is used here, the vfs already clamped
the write range to s_maxbytes.
Fix these issues, and then the atomic writes regressions in generic/760,
generic/617, generic/091, generic/263, and generic/521 all go away for
me.
Cc: stable@vger.kernel.org # v6.16
Fixes: bd1d2c21d5 ("xfs: add xfs_atomic_write_cow_iomap_begin()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
With the 20 Oct 2025 release of fstests, generic/521 fails for me on
regular (aka non-block-atomic-writes) storage:
QA output created by 521
dowrite: write: Input/output error
LOG DUMP (8553 total operations):
1( 1 mod 256): SKIPPED (no operation)
2( 2 mod 256): WRITE 0x7e000 thru 0x8dfff (0x10000 bytes) HOLE
3( 3 mod 256): READ 0x69000 thru 0x79fff (0x11000 bytes)
4( 4 mod 256): FALLOC 0x53c38 thru 0x5e853 (0xac1b bytes) INTERIOR
5( 5 mod 256): COPY 0x55000 thru 0x59fff (0x5000 bytes) to 0x25000 thru 0x29fff
6( 6 mod 256): WRITE 0x74000 thru 0x88fff (0x15000 bytes)
7( 7 mod 256): ZERO 0xedb1 thru 0x11693 (0x28e3 bytes)
with a warning in dmesg from iomap about XFS trying to give it a
delalloc mapping for a directio write. Fix the software atomic write
iomap_begin code to convert the reservation into a written mapping.
This doesn't fix the data corruption problems reported by generic/760,
but it's a start.
Cc: stable@vger.kernel.org # v6.16
Fixes: bd1d2c21d5 ("xfs: add xfs_atomic_write_cow_iomap_begin()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaQjAlgAKCRAsFbugiYzL
e1g/AP0VjhhuC5zzElFTNf+5HTgNnXAvs6ghg2BUPkJug+X6xAD9GnKdlrqoo4qw
iGex7lkBnIzPn+fTlF0xPHFDvF0cgww=
=b8DL
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251103' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc5
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim radios marked destroy_on_close are removed when the Netlink socket
that created them is closed. As the portid is not unique across network
namespaces, closing a socket in one namespace may remove radios in another
if it has the destroy_on_close flag set.
Instead of matching the network namespace, match the netgroup of the radio
to limit radio removal to those that have been created by the closing
Netlink socket. The netgroup of a radio identifies the network namespace
it was created in, and matching on it removes a destroy_on_close radio
even if it has been moved to another namespace.
Fixes: 100cb9ff40 ("mac80211_hwsim: Allow managing radios from non-initial namespaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://patch.msgid.link/20251103082436.30483-1-martin@strongswan.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1
"memory map", the definition of the EARC control register shows that the
EARC controller software reset is controlled via bit 0, while the EARC PHY
software reset is controlled via bit 1.
This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK
and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would
imply that the EARC controller software reset is controlled via bit 1 and
the EARC PHY software reset is controlled via bit 2. Fix them.
Fixes: a83bc87cd3 ("reset: imx8mp-audiomix: Prepare the code for more reset bits")
Cc: stable@vger.kernel.org
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since commit d24cfee7f6 ("spi: Fix acpi deferred irq probe"), the
acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called
on the SPI device.
If there is no driver for the SPI device then the move to spi_probe()
results in acpi_dev_gpio_irq_get() never getting called. This may
cause problems by leaving the GPIO pin floating because this call is
responsible for setting up the GPIO pin direction and/or bias according
to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device()
to ensure the GPIO pin is always correctly setup, while keeping the
acpi_dev_gpio_irq_get() call added to spi_probe() to deal with
-EPROBE_DEFER returns caused by the GPIO controller not having a driver
yet.
Link: https://bbs.archlinux.org/viewtopic.php?id=302348
Fixes: d24cfee7f6 ("spi: Fix acpi deferred irq probe")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251102190921.30068-1-hansg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enforce checking of sb_min_blocksize() calls and update all callers
accordingly.
* patches from https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com:
block: add __must_check attribute to sb_min_blocksize()
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
Link: https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d84 ("binfmt_misc: fix possible deadlock in bm_register_write")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
When sb_min_blocksize() returns 0 and the return value is not checked,
it may lead to a situation where sb->s_blocksize is 0 when
accessing the filesystem super block. After commit a64e5a5960
("bdev: add back PAGE_SIZE block size validation for
sb_set_blocksize()"), this becomes more likely to happen when the
block device’s logical_block_size is larger than PAGE_SIZE and the
filesystem is unformatted. Add the __must_check attribute to ensure
callers always check the return value.
Cc: stable@vger.kernel.org # v6.15
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-6-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
In virtio_fs_add_queues_sysfs(), the code incorrectly checks fs->mqs_kobj
after calling kobject_create_and_add(). Change the check to fsvq->kobj
(fs->mqs_kobj -> fsvq->kobj) to ensure the per-queue kobject is
successfully created.
Fixes: 87cbdc396a ("virtio_fs: add sysfs entries for queue information")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251027104658.1668537-1-alok.a.tiwari@oracle.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid the
filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: a64e5a5960 ("bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-5-yangyongpeng.storage@gmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
opt->blocksize and sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 1b17a46c92 ("isofs: convert isofs to use the new mount API")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-4-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
accessing the filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 719c1e1829 ("exfat: add super block operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-3-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Clang doesn't like that (1ULL<<(64)) overflows when initializing a
global scope variable, even if that part of the ternary isn't used when
n = 64. The same initialization can be done without warnings in function
scopes, and GCC doesn't mind either way.
The build failure that highlighted this was already fixed in a different
way [1], which also has detailed links to the Clang issues. However it's
not going to be long before the same thing happens again, so it's better
to fix the root cause.
Fix it by using GENMASK_ULL() which does exactly the same thing, is much
more readable anyway, and doesn't have a shift that overflows.
[1]: https://lore.kernel.org/all/20250918-mmp-pdma-simplify-dma-addressing-v1-1-5c2be2b85696@riscstar.com/
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251030-james-fix-dma_bit_mask-v1-1-ad1ce7cfab6e@linaro.org
In the commit referenced by the Fixes tag,
devm_gpiod_get_optional() was replaced by manual
GPIO management, relying on the regulator core to release the
GPIO descriptor. However, this approach does not account for the
error path: when regulator registration fails, the core never
takes over the GPIO, resulting in a resource leak.
Add gpiod_put() before returning on regulator registration failure.
Fixes: 5e6f3ae5c1 ("regulator: fixed: Let core handle GPIO descriptor")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251028172828.625-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmkLExYACgkQCF8+vY7k
4RUbiQ//bQCnfN2a+ombBf8Qr7UWlS+3YSW1qHtAMwjsMVxcgORhOJiudYMIe4Z8
sXb8xS6uyvZiRrnBUjB8nryfnpKXyGVeRD7nFK9AblBUgGt4UsOHc4PQPUkSeRoa
JinCUnxwu5VHTjDaLYqVBdgKyQYHU6ctfs0PlVjmf7dtolWyF2zMRhZbPy/3mf9M
gF3bfhoLPHXMAYtHcR9QUnib1dvbrLvVDJ9t+emssKu7SWKxcc5lxG0b5dmRaaZB
UBwToFZR/bjbOnxwDBwbyLcARVAXc9xenmc8xBnkhR+SrIbgb24+BO+VifNKu6pu
crgoJWTGjE8/t5fgQpgxHgRBWGwlyS/aYaufXWe4Qz6VMI9RzJelLM184LWH04Pa
CVEPurO1B9PpqSDXZ12q19wcXXxXv5ES4LZ+guXWqPhAI2C5jH8IxIVyRPTmWK8X
VwGootioTfR+eSpHxn4kBJqLPuNN9Sx+M8COvA1WP/LQ27ZObbOy7P1bqGnZBn9F
sbSYfBKxcCiMcpht4pNZ3V/mC66kf3HbDubMGlFxK7rrYXv+9WiksNC1LkiCHQt8
iklV2Vx4rgKPGfcWQELq7YELDPRZXDZPVxpAFOSCrWSeYwUacR+QznbOrGn3qnle
3XAh+rgpa46piJuBYfknYb5rr6jkk5rwehYgh056DOCth8fUNJg=
=RhZS
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- honour privacy led with pdx86/int3472
- fix invalid file access on cx18 and ivtv
- forbid remove_bufs when legacy fileio is active on videbuf2
- add an heuristic to find stream entity on uvcvideo
* tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: forbid remove_bufs when legacy fileio is active
media: uvcvideo: Use heuristic to find stream entity
media: v4l2-subdev / pdx86: int3472: Use "privacy" as con_id for the privacy LED
media: ivtv: Fix invalid access to file *
media: cx18: Fix invalid access to file *
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 4959aebba8 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change.
Fixes: 4959aebba8 ("virtio-net: use mtu size as buffer length for big packets")
Cc: stable@vger.kernel.org
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251030144438.7582-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mykyta Yatsenko says:
====================
bpf: Add _impl suffix for kfuncs with implicit args
We have established a pattern of function naming win "_impl" suffix;
those functions accept verifier-provided bpf_prog_aux argument.
Following uniform convention will allow for transparent backwards
compatibility with the upcoming KF_IMPLICIT_ARGS feature. This patch
set aims to fix current deviation from the convention to eliminate
unnecessary backwards incompatibility in the future.
Three kfuncs added in 6.18 don’t follow this *_impl convention and
therefore won’t participate in the new KF_IMPLICIT_ARGS mechanism:
* bpf_task_work_schedule_resume()
* bpf_task_work_schedule_signal()
* bpf_stream_vprintk()
Rename them to align with the implicit-arg flow:
bpf_task_work_schedule_resume() -> bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal() -> bpf_task_work_schedule_signal_impl()
bpf_stream_vprintk() -> bpf_stream_vprintk_impl()
The KF_IMPLICIT_ARGS mechanism is not in tree yet, so callers must
switch to the *_impl names for now. Once the new mechanism lands, the
plain names (without _impl) will be reintroduced.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
---
Changes in v3:
- Fix commit messages
- Link to v2: https://lore.kernel.org/r/20251104-implv2-v2-0-6dbc35f39f28@meta.com
Changes in v1:
- Split commit into 2
- Rebase on the correct branch
- Link to v1: https://lore.kernel.org/all/20251103232319.122965-1-mykyta.yatsenko5@gmail.com/
====================
Link: https://patch.msgid.link/20251104-implv2-v3-0-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().
This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()
This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Michael Chan says:
====================
bnxt_en: Bug fixes
Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver
coredump feature recently added in 6.13. Patch #1 adds the necessary
call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes
a possible null pointer derefernce when using early versions of the FW
with this feature. Patch #4 adds the coredump header information
unconditionally to make it more robust.
Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5
eliminates a dmesg warning when doing devlink reload.
====================
Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code calls bnxt_cancel_reservations() after
bnxt_hwrm_func_drv_unrgtr() in bnxt_dl_reload_down().
bnxt_cancel_reservations() calls the FW and it will always fail since
the driver has already unregistered, triggering this warning:
bnxt_en 0000:0a:00.0 ens2np0: resc_qcaps failed
Fix it by calling bnxt_clear_reservations() which will skip the
unnecessary FW call since we have unregistered.
Fixes: 228ea8c187 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shantiprasad Shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While populating firmware host logging segments for the coredump, it is
possible for the FW command that flushes the segment to fail. When that
happens, the existing code will not update the max entry and entry size
in the segment header and this causes software that decodes the coredump
to skip the segment.
The segment most likely has already collected some DMA data, so always
update these 2 segment fields in the header to allow the decoder to
decode any data in the segment.
Fixes: 3c2179e663 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding.
Fixes: 84fcd9449f ("bnxt_en: Manage the FW trace context memory")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netif_close() call in bnxt_shutdown() only stops packet DMA. There
may be FW DMA for trace logging (recently added) that will continue. If
we kexec to a new kernel, the DMA will corrupt memory in the new kernel.
Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.
This will stop the FW DMA. In case the call fails, call pcie_flr() to
reset the function and stop the DMA.
Fixes: 24d694aec1 ("bnxt_en: Allocate backing store memory for FW trace logs")
Reported-by: Jakub Kicinski <kicinski@meta.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40f ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 4adc20ba95 ("ARM: dts: broadcom: rpi: Switch to V3D firmware
clock") causes a regression in arm64 developer setups, which stores the
kernel modules via NFS. Before this change the involved V3D clock provider
was builtin, but after this DT change the clk-raspberrypi is responsible
for V3D and for arm64/defconfig this driver is build as a kernel module.
In case these kernel modules are provided via NFS this takes too long and
the PM domain core give up before the clock driver could be loaded:
v3d fec00000.gpu: deferred probe timeout, ignoring dependency
So resolve this issue by making this critical driver builtin.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/9ebda74e-e700-4fbe-bca5-382f92417a9c@sirena.org.uk/
Fixes: 4adc20ba95 ("ARM: dts: broadcom: rpi: Switch to V3D firmware clock")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20251104174518.11783-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fix refcount leak in `smb2_set_path_attr` when path conversion fails.
Function `cifs_get_writable_path` returns `cfile` with its reference
counter `cfile->count` increased on success. Function `smb2_compound_op`
would decrease the reference counter for `cfile`, as stated in its
comment. By calling `smb2_rename_path`, the reference counter of `cfile`
would leak if `cifs_convert_path_to_utf16` fails in `smb2_set_path_attr`.
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
Following fixes:
- Memory leak in bnxt GSI qp path
- Failure in irdma registering large MRs
- Failure to clean out the right CQ table entry in irdma
- Invalid vf_id in some cases
- Incorrect error unwind in EFA CQ create
- hns doesn't use the optimal cq/qp relationships for it's HW banks
- hns reports the wrong SGE size to userspace for its QPs
- Corruption of the hns work queue entries in some cases
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaQoEZAAKCRCFwuHvBreF
YbdjAP9MfjyZvmOu5H7yqwdIgCNeduANVWbEzSXUEU6j5LRCywD+O5UnkPbHQ9ko
k+jo07V6Ra/FuTVmr1Wf/Nfa9JmPqwc=
=dnEg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Memory leak in bnxt GSI qp path
- Failure in irdma registering large MRs
- Failure to clean out the right CQ table entry in irdma
- Invalid vf_id in some cases
- Incorrect error unwind in EFA CQ create
- hns doesn't use the optimal cq/qp relationships for it's HW banks
- hns reports the wrong SGE size to userspace for its QPs
- Corruption of the hns work queue entries in some cases
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update irdma maintainers
RDMA/irdma: Fix vf_id size to u16 to avoid overflow
RDMA/hns: Remove an extra blank line
RDMA/hns: Fix wrong WQE data when QP wraps around
RDMA/hns: Fix the modification of max_send_sge
RDMA/hns: Fix recv CQ and QP cache affinity
RDMA/uverbs: Fix umem release in UVERBS_METHOD_CQ_CREATE
RDMA/irdma: Set irdma_cq cq_num field during CQ create
RDMA/irdma: Fix SD index calculation
RDMA/bnxt_re: Fix a potential memory leak in destroy_gsi_sqp
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd12 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
