In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
Fixes: 63cc54a6f0 ("net: dsa: b53: Fix egress flooding settings")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski says:
====================
net: dsa: b53: fix bcm63xx rgmii user ports with speed < 1g
It seems that the integrated switch in bcm63xx does not support polling
external PHYs for link configuration. While the appropriate registers
seem to exist with expected content, changing them does nothing.
This results in user ports with external PHYs only working in 1000/fd,
and not in other modes, despite linking up.
Fix this by writing the link result into the port state override
register, like we already do for fixed links.
With this, ports with lower speeds can successfully transmit and receive
packets.
This also aligns the behaviour with the old bcm63xx_enetsw driver for
those ports.
====================
Link: https://patch.msgid.link/20251101132807.50419-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM63XX's switch does not support MDIO scanning of external phys, so its
MACs needs to be manually configured for autonegotiated link speeds.
So b53_force_port_config() and b53_force_link() accordingly also when
mode is MLO_AN_PHY for those ports.
Fixes lower speeds than 1000/full on rgmii ports 4 - 7.
This aligns the behaviour with the old bcm63xx_enetsw driver for those
ports.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-3-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f8 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to device_node_to_regmap() in airoha_mdio_probe() can return
an ERR_PTR() if regmap initialization fails. Currently, the driver
stores the pointer without validation, which could lead to a crash
if it is later dereferenced.
Add an IS_ERR() check and return the corresponding error code to make
the probe path more robust.
Fixes: 67e3ba9783 ("net: mdio: Add MDIO bus controller for Airoha AN7583")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251031161607.58581-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cimC
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Fix an off-by-one error in versalnet_edac
* tag 'edac_urgent_for_v6.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versalnet: Fix off by one in handle_error()
The `rustdoc` modifiers bug [1] was fixed in Rust 1.90.0 [2], for which
we added a workaround in commit abbf9a4494 ("rust: workaround `rustdoc`
target modifiers bug").
However, `rustdoc`'s doctest generation still has a similar issue [3],
being fixed at [4], which does not affect us because we apply the
workaround to both, and now, starting with Rust 1.91.0 (released
2025-10-30), `-Zsanitizer` is a target modifier too [5], which means we
fail with:
RUSTDOC TK rust/kernel/lib.rs
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `kernel`
--> rust/kernel/lib.rs:3:1
|
3 | //! The `kernel` crate.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
A simple way around is to add the sanitizer to the list in the existing
workaround (especially if we had not started to pass the sanitizer
flags in the previous commit, since in that case that would not be
necessary). However, that still applies the workaround in more cases
than necessary.
Instead, only modify the doctests flags to ignore the check for
sanitizers, so that it is more local (and thus the compiler keeps checking
it for us in the normal `rustdoc` calls). Since the previous commit
already treated the `rustdoc` calls as kernel objects, this should allow
us in the future to easily remove this workaround when the time comes.
By the way, the `-Cunsafe-allow-abi-mismatch` flag overwrites previous
ones rather than appending, so it needs to be all done in the same flag.
Moreover, unknown modifiers are rejected, and thus we have to gate based
on the version too.
Finally, `-Zsanitizer-cfi-normalize-integers` is not affected (in Rust
1.91.0), so it is not needed in the workaround for the moment.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Link: https://github.com/rust-lang/rust/issues/146465 [3]
Link: https://github.com/rust-lang/rust/pull/148068 [4]
Link: https://github.com/rust-lang/rust/pull/138736 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Even if normally `build_error` isn't a kernel object, it should still
be treated as such so that we pass the same flags. Similarly, `rustdoc`
targets are never kernel objects, but we need to treat them as such.
Otherwise, starting with Rust 1.91.0 (released 2025-10-30), `rustc`
will complain about missing sanitizer flags since `-Zsanitizer` is a
target modifier too [1]:
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `build_error`
--> rust/build_error.rs:3:1
|
3 | //! Build-time error.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
Thus explicitly mark them as kernel objects.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138736 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
I started seeing this in recent Fedora 42 kernels:
root@x1:~# uname -a
Linux x1 6.17.4-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sun Oct 19 18:47:49 UTC 2025 x86_64 GNU/Linux
root@x1:~#
root@x1:~# perf test 1
1: vmlinux symtab matches kallsyms : FAILED!
root@x1:~#
Related to:
root@x1:~# grep ' 1 ' /proc/kallsyms
ffffffffb098bc00 1 __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
ffffffffb098bc10 1 _RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
root@x1:~#
That is found in:
root@x1:~# pahole --running_kernel_vmlinux
/usr/lib/debug/lib/modules/6.17.4-200.fc42.x86_64/vmlinux
root@x1:~#
root@x1:~# readelf -sW /usr/lib/debug/lib/modules/6.17.4-200.fc42.x86_64/vmlinux | grep __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
150649: ffffffff81f8bc00 16 FUNC LOCAL DEFAULT 1 __pfx__RNCINvNtNtNtCsfwaGRd4cjqE_4core4iter8adapters3map12map_try_foldjNtCskFudTml27HW_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
root@x1:~#
But was being filtered out when reading /proc/kallsyms, as the '1'
symbol type was not being handled, do it, there are just two of them at
this point.
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <lossin@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Revert commit 690de2902d ("i2c: muxes: pca954x: Use reset controller
only") and its dependent commit 94c2967764 ("i2c: muxes: pca954x:
Reset if (de)select fails") because the first breaks all users of the
driver, by requiring a completely optional reset-gpio driver. These
commits cause that mux driver simply stops working when optional
reset-gpio is not included, but that reset-gpio is not pulled anyhow.
Driver cannot remove legacy reset-gpios handling.
Fixes: 690de2902d ("i2c: muxes: pca954x: Use reset controller only")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
To pick the changes in:
885df2d210 ("KVM: x86: Add support for RDMSR/WRMSRNS w/ immediate on Intel")
c42856af8f ("KVM: TDX: Add a place holder for handler of TDX hypercalls (TDG.VP.VMCALL)")
That makes 'perf kvm-stat' aware of these new TDCALL and
MSR_{READ,WRITE}_IMM exit reasons, thus addressing the following perf
build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
b8c3c9f5d0 ("x86/apic: Initialize Secure AVIC APIC backing page")
That triggers:
CC /tmp/build/perf-tools/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-tools/arch/x86/util/perf-util-in.o
LD /tmp/build/perf-tools/arch/x86/perf-util-in.o
LD /tmp/build/perf-tools/arch/perf-util-in.o
LD /tmp/build/perf-tools/perf-util-in.o
AR /tmp/build/perf-tools/libperf-util.a
LINK /tmp/build/perf-tools/perf
But this time causes no changes in tooling results, as the introduced
SVM_VMGEXIT_SAVIC exit reason wasn't added to SVM_EXIT_REASONS, that is
used in kvm-stat.c.
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Please see tools/include/uapi/README for further details.
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
fddd07626b ("KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors")
f2f5519aa4 ("KVM: x86: Define Control Protection Exception (#CP) vector")
9d6812d415 ("KVM: x86: Enable guest SSP read/write interface with new uAPIs")
06f2969c6a ("KVM: x86: Introduce KVM_{G,S}ET_ONE_REG uAPIs support")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The battery->present variable is a 1 bit bitfield in a u8. This means
that the "state & (1 << battery->id)" test will only work when
"battery->id" is zero, otherwise ->present is zero. Fix this by adding
a !!.
Fixes: db1c291af7 ("ACPI: SBS: Make SBS reads table-driven.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQSzr4NynN2mpEvG@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
James Clark has been actively reviewing patches and contributing
to perf tools. Reflect this by adding him as a reviewer in the
MAINTAINERS file.
Reviewed-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2ada9cb1df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added the Fixes tag while cherry-picking to fixes]
To pick the changes in:
fe2bf6234e ("KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set")
d2042d8f96 ("KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS")
3d3a04fad2 ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the 'perf trace' ioctl syscall argument beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL
solves. The uapi can also be slightly adjusted to accommodate future
extensions. Remove the feature for now, it'll be reworked for the next
release.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As part of a recent move go exclusively listing git.kernel.org trees
for the block and io_uring development, the "BLOCK LAYER" entry wasn't
updated as it already used git.kernel.org. However, outside of just
moving from git.kernel.dk to git.kernel.org, the "block" part of the
trees was also dropped, as the tree serves both block and io_uring
development trees.
Fix up the "BLOCK LAYER" entry so they all use the same tree.
Reported-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Picking the changes from:
0864197382 ("drm: Move drm_gem ioctl kerneldoc to uapi file")
53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the tools/perf/trace/beauty
autogenerated tables will be able to translate this new ioctl command into
a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2025-11-03 09:57:34.832553174 -0300
+++ after 2025-11-03 09:57:47.969409428 -0300
@@ -111,6 +111,7 @@
[0xCF] = "SYNCOBJ_EVENTFD",
[0xD0] = "MODE_CLOSEFB",
[0xD1] = "SET_CLIENT_NAME",
+ [0xD2] = "GEM_CHANGE_HANDLE",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Please see tools/include/uapi/README for further details.
Cc: Christian König <christian.koenig@amd.com>
Cc: David Francis <David.Francis@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251103141132.53471-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Looking up a GPIO controller by label that is the name of the software
node is wonky at best - the GPIO controller driver is free to set
a different label than the name of its firmware node. We're already being
passed a firmware node handle attached to the GPIO device to
swnode_get_gpio_device() so use it instead for a more precise lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: e7f9ff5dc9 ("gpiolib: add support for software nodes")
Link: https://lore.kernel.org/r/20251103-reset-gpios-swnodes-v4-4-6461800b6775@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915 ("firmware: stratix10-svc: extend svc to support new RSU features")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Recent AMD node rework removed the "search and count" method of caching AMD
root devices. This depended on the value from a Data Fabric register that was
expected to hold the PCI bus of one of the root devices attached to that
fabric.
However, this expectation is incorrect. The register, when read from PCI
config space, returns the bitwise-OR of the buses of all attached root
devices.
This behavior is benign on AMD reference design boards, since the bus numbers
are aligned. This results in a bitwise-OR value matching one of the buses. For
example, 0x00 | 0x40 | 0xA0 | 0xE0 = 0xE0.
This behavior breaks on boards where the bus numbers are not exactly aligned.
For example, 0x00 | 0x07 | 0xE0 | 0x15 = 0x1F.
The examples above are for AMD node 0. The first root device on other nodes
will not be 0x00. The first root device for other nodes will depend on the
total number of root devices, the system topology, and the specific PCI bus
number assignment.
For example, a system with 2 AMD nodes could have this:
Node 0 : 0x00 0x07 0x0e 0x15
Node 1 : 0x1c 0x23 0x2a 0x31
The bus numbering style in the reference boards is not a requirement. The
numbering found in other boards is not incorrect. Therefore, the root device
caching method needs to be adjusted.
Go back to the "search and count" method used before the recent rework.
Search for root devices using PCI class code rather than fixed PCI IDs.
This keeps the goal of the rework (remove dependency on PCI IDs) while being
able to support various board designs.
Merge helper functions to reduce code duplication.
[ bp: Reflow comment. ]
Fixes: 40a5f6ffdf ("x86/amd_nb: Simplify root device search")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/all/20251028-fix-amd-root-v2-1-843e38f8be2c@amd.com
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This was supposed to pass "onenand" instead of "&onenand" with the
ampersand. Passing a random stack address which will be gone when the
function ends makes no sense. However the good thing is that the pointer
is never used, so this doesn't cause a problem at run time.
Fixes: e23abf4b77 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
According to datasheet (http://eng.fmsh.com/nvm/FM25S01A_ds_eng.pdf)
there is no QE (Quad Enable) bit for FM25S01A flash, so remove it.
Fixes: 5f284dc15c ("mtd: spinand: add support for FudanMicro FM25S01A")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Tested-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
cpu-clock usage by the async-profiler tool can trigger a system hang,
which got bisected back to the following commit by Octavia Togami:
18dbcbfabf ("perf: Fix the POLL_HUP delivery breakage") causes this issue
The root cause of the hang is that cpu-clock is a special type of SW
event which relies on hrtimers. The __perf_event_overflow() callback
is invoked from the hrtimer handler for cpu-clock events, and
__perf_event_overflow() tries to call cpu_clock_event_stop()
to stop the event, which calls htimer_cancel() to cancel the hrtimer.
But that's a recursion into the hrtimer code from a hrtimer handler,
which (unsurprisingly) deadlocks.
To fix this bug, use hrtimer_try_to_cancel() instead, and set
the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer()
to stop the event once it sees the PERF_HES_STOPPED flag.
[ mingo: Fixed the comments and improved the changelog. ]
Closes: https://lore.kernel.org/all/CAHPNGSQpXEopYreir+uDDEbtXTBvBvi8c6fYXJvceqtgTPao3Q@mail.gmail.com/
Fixes: 18dbcbfabf ("perf: Fix the POLL_HUP delivery breakage")
Reported-by: Octavia Togami <octavia.togami@gmail.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Octavia Togami <octavia.togami@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/lucko/spark/issues/530
Link: https://patch.msgid.link/20251015051828.12809-1-dapeng1.mi@linux.intel.com
In the past two years, I have focused on EROFS and contributed features
including the reserved buffer pool, configurable global buffer pool, and
the ongoing direct I/O support for compressed data.
I would like to continue contributing to EROFS and help with code
reviews. Please CC me on EROFS-related changes.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Acked-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The future move of pin-init to `syn` uncovers the following broken
intra-doc link:
error: unresolved link to `crate::pin_init`
--> rust/kernel/sync/condvar.rs:39:40
|
39 | /// instances is with the [`pin_init`](crate::pin_init!) and [`new_condvar`] macros.
| ^^^^^^^^^^^^^^^^ no item named `pin_init` in module `kernel`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Currently, when rendered, the link points to a literal `crate::pin_init!`
URL.
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: 129e97be8e ("rust: pin-init: fix documentation links")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251029073344.349341-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The future move of pin-init to `syn` uncovers the following private
intra-doc link:
error: public documentation for `Devres` links to private item `Self::inner`
--> rust/kernel/devres.rs:106:7
|
106 | /// [`Self::inner`] is guaranteed to be initialized and is always accessed read-only.
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::private_intra_doc_links)]`
Currently, when rendered, the link points to "nowhere" (an inexistent
anchor for a "method").
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: f5d3ef25d2 ("rust: devres: get rid of Devres' inner Arc")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251029071406.324511-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Adds Krzysztof Czurylo as co-maintainer for irdma driver.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
One new device ID for an Intel SoC.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+eAACgkQJNaLcl1U
h9CUIwf+J+ii60TWW4Ye9rRy4QN5WjLLud9VTpVtLIVu54oXK4NxU+blTQ82AynB
291ZJ3sEHiO4PTi6ZAUsgKCZ+bCS0fE2XBJBH642yTyM1ixyFx/hs71rzE97OOA4
tQFAxJwJFRXIwTq4HEwBbxE1Oh0KFnBMQAo6lWx9rrtm+6BcUzYMXTwGYajLj3gj
vULpU6xpOuJ7H+LgM8W0pHVD4iGdqMUy/6qiknjmN5UKiormJxjBQzPSLgQis/7R
tSFO6dOfsQgEmlzIgBgHFtnikCNor6aA5bLOJgmPIemX9csQaejyZSpyAWSfZYdQ
28/yA4VemgiEddfeecpCMCd2s8vzQA==
=Y8Hn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
A simple fix for a missed part of an API conversion on the bd718x7 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+isACgkQJNaLcl1U
h9CmJgf+MSainrAqu7SLLGYCA9P+dpUwxHoxWX5cpCMWFGNPGIg6hr9sDjxJuOXr
gQkUcSOzkFJgJ3WCphiOIUgXttRfYqk3/O2/LFn3Co0cdlnI8jTy5nTD7Ks4H8Aa
e2mUo+okFRMH2zYIOxDXzCwTgPuNc0glLSLTjFqc1pwghvPmgHqJEWbjVG560GbI
HBKrTCygFOIJT5LVMGXWFEh8IPTMdvDn4VFGqMwT9KaDx4DP+fYecfg8CEePHsRl
F+40J2URgUDFYMOInzMoWL91766q9euQTsywLWFS3KxKtll+19jF6oACdeA3cXZE
guR6V2zxzj8acpQ1REhCO11trAvLTw==
=beWy
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF/SEACgkQJNaLcl1U
h9BjXwgAgg3HM/oWn3aiWp8q9j58dSJb7pWD+GKdBS8lvBoOvmnHY9QnEOkBFmvV
Oa1vNiKVlRIsa0YRbswsvkB0Wt6F5vOaQ3WrZpVYpuF5xxyC/1b0AQTIiZhfZN2E
p46E1/VkCJNWdoJwqdIS9kWvZDHeA3BcCDwDc56FsgBE/25LNfVOPy/wxR0OU2dd
1LFGASCW9SRV6+xxCAb+FE/eLM/7RGvjIFiuh5flx/oPKfoqyQ5E1hjnrG5CJH0k
kI8mapifSFB2cd72SKdB/KywQVYmzkFQMQYUmHKiFWtqwql8A6TjAsmX/yJmdUI1
7OioR+sA6TGr4QNjUE/0NyrAotLs6A==
=1Osa
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations.
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum.
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds.
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z2oz
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
- Fix an out-of-bounds access on non-hybrid platforms in the
Intel PMU DS code, reported by KASAN.
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NYBY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaQXOZAAKCRBcsMJ8RxYu
Y43FAX9gZLSS+6U9NtjQXbwCzhKg0fPWMqt2eEhLxPF2bpNO7FmgecQKg3wZi0XC
gkhOqHYBfikmW5D/rUm0OMY7mBmyIMaSm0r77u82up08YZnc40LnMavH4+HAm15h
lhT/MhpJKQ==
=BJng
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support for
it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQWN/gAKCRAdayaRccAa
ljUzAQCGh5zhfwsCfMc5M7/9v2FiEBKNzTc/xTK04vWdZ3A39QEA6XuyVx+QPBkS
ts7gPrR6NC7AokdqTHXKhBW/ebaNOw0=
=GmCb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
