Sice commit 7b9eb53e85 ("media: cx18: Access v4l2_fh from file")
all ioctl handlers have been ported to operate on the file * first
function argument.
The cx18 DVB layer calls cx18_init_on_first_open() when the driver needs
to start streaming. This function calls the s_input(), s_std() and
s_frequency() ioctl handlers directly, but being called from the driver
context, it doesn't have a valid file * to pass them. This causes
the ioctl handlers to deference an invalid pointer.
Fix this by moving the implementation of those ioctls to functions that
take a cx18 pointer instead of a file pointer, and turn the V4L2 ioctl
handlers into wrappers that get the cx18 from the file. When calling
from cx18_init_on_first_open(), pass the cx18 pointer directly. This
allows removing the fake fh in cx18_init_on_first_open().
The bug has been reported by Smatch:
--> 1223 cx18_s_input(NULL, &fh, video_input);
The patch adds a new dereference of "file" but some of the callers pass a
NULL pointer.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aKL4OMWsESUdX8KQ@stanley.mountain/
Fixes: 7b9eb53e85 ("media: cx18: Access v4l2_fh from file")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix spelling of CIP_NO_HEADER to prevent a kernel-doc warning.
Warning: amdtp-stream.h:57 Enum value 'CIP_NO_HEADER' not described in enum 'cip_flags'
Warning: amdtp-stream.h:57 Excess enum value '%CIP_NO_HEADERS' description in 'cip_flags'
Fixes: 3b196c394d ("ALSA: firewire-lib: add no-header packet processing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab7 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add "INTC10D2" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The check for some lost idle pelt time should be always done when
pick_next_task_fair() fails to pick a task and not only when we call it
from the fair fast-path.
The case happens when the last running task on rq is a RT or DL task. When
the latter goes to sleep and the /Sum of util_sum of the rq is at the max
value, we don't account the lost of idle time whereas we should.
Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
IBM CI tool reported kernel warning[1] when running a CPU removal
operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1"
WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170
NIP [c0000000002b6ed8] cpudl_set+0x58/0x170
LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0
Call Trace:
[c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable)
[c0000000002b7cb8] dl_server_timer+0x168/0x2a0
[c00000000034df84] __hrtimer_run_queues+0x1a4/0x390
[c00000000034f624] hrtimer_interrupt+0x124/0x300
[c00000000002a230] timer_interrupt+0x140/0x320
Git bisects to: commit 4ae8d9aa9f ("sched/deadline: Fix dl_server getting stuck")
This happens since:
- dl_server hrtimer gets enqueued close to cpu offline, when
kthread_park enqueues a fair task.
- CPU goes offline and drmgr removes it from cpu_present_mask.
- hrtimer fires and warning is hit.
Fix it by stopping the dl_server before CPU is marked dead.
[1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/
[2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr
[sshegde: wrote the changelog and tested it]
Fixes: 4ae8d9aa9f ("sched/deadline: Fix dl_server getting stuck")
Closes: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
There is a spelling mistake in HID description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Completion napi can free out-of-order tx descriptors if hw QoS is
enabled and packets with different priority are queued to same DMA ring.
Take into account possible out-of-order reports checking if the tx queue
is full using circular buffer head/tail pointer instead of the number of
queued packets.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
Fixes: 50c8339e92 ("tcp: tso: restore IW10 after TSO autosizing")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251011115742.1245771-1-edumazet@google.com
[pabeni@redhat.com: fixed whitespace issue]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.
Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:
MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1
when the kernel is compiled with the following configuration:
CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m
To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.
For a more detailed discussion, see [1].
[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
rtl8152_driver_init() is missing the error handling.
When rtl8152_driver registration fails, rtl8152_cfgselector_driver
should be deregistered.
Fixes: ec51fbd1b8 ("r8152: add USB device driver for config selection")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com
[pabeni@redhat.com: clarified the commit message]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some controllers are very bad at updating the IMU, leading to these
messages spamming the syslog. Rate-limiting them helps with this a bit.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers, such as the PB Tails CHOC, won't always
respond quickly on startup. Since this packet is needed for probe, and only
once during probe, let's just wait an extra second, which makes connecting
consistent.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
hid_warn_ratelimited() is needed. Add the others as part of the block.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add the missing PCI ID for the quickspi device used on
the Lenovo Yoga Pro 9i 16IAH10.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=220567
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The original implementation used level detection for the first interrupt
after device reset to avoid potential interrupt line noise and missed
interrupts during the initialization phase. However, this approach
introduced unintended side effects when tested with certain touch panels,
including:
- Delayed hardware interrupt response
- Multiple spurious interrupt triggers
Switching back to edge detection for the first interrupt resolves these
issues while maintaining reliable interrupt handling.
Extensive testing across multiple platforms with touch panels from
various vendors confirms this change introduces no regressions.
[jkosina@suse.com: properly capitalize shortlog]
Fixes: 9d8d51735a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The type definition of qcdev->i2c_max_frame_size is already
u32, so remove the unnecessary type casting le16_to_cpu.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
That causes perf to misreport the device major/minor numbers of the file
system of the file, and the generation of the file, and potentially other
inode details. There is an existing helper file_user_inode() for that
situation.
Use file_user_inode() instead of file_inode() to get the inode for MMAP2
events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps
...
55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ]
#
# stat /root/test/merged/cat
File: /root/test/merged/cat
Size: 1127792 Blocks: 2208 IO Block: 4096 regular file
Device: 0,26 Inode: 3419 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2025-09-08 12:23:59.453309624 +0000
Modify: 2025-09-08 12:23:59.454309624 +0000
Change: 2025-09-08 12:23:59.454309624 +0000
Birth: 2025-09-08 12:23:59.453309624 +0000
Before:
Device reported 00:02 differs from stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat
After:
Device reported 00:1a is the same as stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
Since commit def3ae83da ("fs: store real path instead of fake path in
backing file f_path"), file_path() no longer returns the user file path
when applied to a backing file. There is an existing helper
file_user_path() for that situation.
Use file_user_path() instead of file_path() to get the path for MMAP
and MMAP2 events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps
...
55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
#
Before:
File name is wrong (/cat), so decoding fails:
# perf script --no-itrace --show-mmap-events
cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat
...
# perf script --itrace=e | wc -l
Warning:
19 instruction trace errors
19
#
After:
File name is correct (/root/test/merged/cat), so decoding is ok:
# perf script --no-itrace --show-mmap-events
cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat
# perf script --itrace=e
# perf script --itrace=e | wc -l
0
#
Fixes: def3ae83da ("fs: store real path instead of fake path in backing file f_path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
It was reported that Intel PT address filters do not work in Docker
containers. That relates to the use of overlayfs.
overlayfs records the backing file in struct vm_area_struct vm_file,
instead of the user file that the user mmapped. In order for an address
filter to match, it must compare to the user file inode. There is an
existing helper file_user_inode() for that situation.
Use file_user_inode() instead of file_inode() to get the inode for address
filter matching.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps
...
55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
# perf buildid-cache --add /root/test/merged/cat
Before:
Address filter does not match so there are no control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
0
# perf script -D | grep 'TIP.PGE' | wc -l
0
#
After:
Address filter does match so there are control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
235
# perf script -D | grep 'TIP.PGE' | wc -l
57
#
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan
Reported-by: Edd Barrett <edd@theunixzoo.co.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
It's less confusing to optimize uprobe right after handlers execution
and before we do the check for changed ip register to avoid situations
where changed ip register would skip uprobe optimization.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251012142005.660727-1-alok.a.tiwari@oracle.com
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b ("amd-xgbe: Perform phy connect/disconnect at dev open/stop")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DbC is currently only enabled back if it's in configured state during
suspend.
If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.
Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f7 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The color parameter passed to drm_draw_fill24() was truncated to 16
bits, leading to an incorrect color drawn to the target iosys_map.
Fix this behavior, widening the parameter to 32 bits.
Fixes: 31fa2c1ca0 ("drm/panic: Move drawing functions to drm_draw")
Signed-off-by: Francesco Valla <francesco@valla.it>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251003-drm_draw_fill24_fix-v1-1-8fb7c1c2a893@valla.it
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
We currently have two ways to identify CPUs that only implement FEAT_VHE
and not FEAT_E2H0:
- either they advertise it via ID_AA64MMFR4_EL1.E2H0,
- or the HCR_EL2.E2H bit is RAO/WI
However, there is a third category of "cpus" that fall between these
two cases: on CPUs that do not implement FEAT_FGT, it is IMPDEF whether
an access to ID_AA64MMFR4_EL1 can trap to EL2 when the register value
is zero.
A consequence of this is that on systems such as Neoverse V2, a NV
guest cannot reliably detect that it is in a VHE-only configuration
(E2H is writable, and ID_AA64MMFR0_EL1 is 0), despite the hypervisor's
best effort to repaint the id register.
Replace the RAO/WI test by a sequence that makes use of the VHE
register remnapping between EL1 and EL2 to detect this situation,
and work out whether we get the VHE behaviour even after having
set HCR_EL2.E2H to 0.
This solves the NV problem, and provides a more reliable acid test
for CPUs that do not completely follow the letter of the architecture
while providing a RES1 behaviour for HCR_EL2.E2H.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/15A85F2B-1A0C-4FA7-9FE4-EEC2203CC09E@global.cadence.com
Commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The driver is currently checking for PHYCR2 register presence in
rtl8211f_config_init(), but it does so after accessing PHYCR2 to
disable EEE. This was introduced in commit bfc17c1658 ("net:
phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence
test before the EEE disablement and simplify the code.
Fixes: bfc17c1658 ("net: phy: realtek: disable PHY-mode EEE")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2025-10-01 (idpf, ixgbe, ixgbevf)
For idpf:
Milena fixes a memory leak in the idpf reset logic when the driver resets
with an outstanding Tx timestamp.
For ixgbe and ixgbevf:
Jedrzej fixes an issue with reporting link speed on E610 VFs.
Jedrzej also fixes the VF mailbox API incompatibilities caused by the
confusion with API v1.4, v1.5, and v1.6. The v1.4 API introduced IPSEC
offload, but this was only supported on Linux hosts. The v1.5 API
introduced a new mailbox API which is necessary to resolve issues on ESX
hosts. The v1.6 API introduced a new link management API for E610. Jedrzej
introduces a new v1.7 API with a feature negotiation which enables properly
checking if features such as IPSEC or the ESX mailbox APIs are supported.
This resolves issues with compatibility on different hosts, and aligns the
API across hosts instead of having Linux require custom mailbox API
versions for IPSEC offload.
Koichiro fixes a KASAN use-after-free bug in ixgbe_remove().
====================
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-0-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send to VF information about features supported by the PF driver.
Increase API version to 1.7.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-5-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc95 ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f289641 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312ad ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/
Fixes: 0062e7cc95 ("ixgbevf: add VF IPsec offload code")
Fixes: 339f289641 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update supported API version and provide handler for
IXGBE_VF_GET_PF_LINK_STATE cmd.
Simply put stored values of link speed and link_up from adapter context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Link: https://lore.kernel.org/stable/20250828095227.1857066-3-jedrzej.jagielski%40intel.com
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-3-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
E610 adapters no longer use the VFLINKS register to read PF's link
speed and linkup state. As a result VF driver cannot get actual link
state and it incorrectly reports 10G which is the default option.
It leads to a situation where even 1G adapters print 10G as actual
link speed. The same happens when PF driver set speed different than 10G.
Add new mailbox operation to let the VF driver request a PF driver
to provide actual link data. Update the mailbox api to v1.6.
Incorporate both ways of getting link status within the legacy
ixgbe_check_mac_link_vf() function.
Fixes: 4c44b450c6 ("ixgbevf: Add support for Intel(R) E610 device")
Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs.
Fixes: 4901e83a94 ("idpf: add Tx timestamp capabilities negotiation")
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-1-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922b ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Broadcom bcm54811 is hardware-strapped to select among RGMII and
GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable
in Miscellaneous Control Register must be also set to select desired
RGMII or MII(-lite)/GMII mode.
Fixes: 3117a11fff ("net: phy: bcm54811: PHY initialization")
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251009130656.1308237-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46dde ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b8988 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gro_cell data structure is per-CPU variable and relies on disabled
BH for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Reported-by: syzbot+8715dd783e9b0bef43b1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c6c3b1.050a0220.2ff435.0382.GAE@google.com/
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20251009094338.j1jyKfjR@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the internal flash contains missing or corrupted configuration,
basic communication over the bus still functions, but the device
is not capable of normal operation (for example, using mailboxes).
This condition is indicated in the info register by the ready bit.
If this bit is cleared, the probe procedure times out while fetching
the device state.
Handle this case by checking the ready bit value in zl3073x_dev_start()
and skipping DPLL device and pin registration if it is cleared.
Do not report this condition as an error, allowing the devlink device
to be registered and enabling the user to flash the correct configuration.
Prior this patch:
[ 31.112299] zl3073x-i2c 1-0070: Failed to fetch input state: -ETIMEDOUT
[ 31.116332] zl3073x-i2c 1-0070: error -ETIMEDOUT: Failed to start device
[ 31.136881] zl3073x-i2c 1-0070: probe with driver zl3073x-i2c failed with error -110
After this patch:
[ 41.011438] zl3073x-i2c 1-0070: FW not fully ready - missing or corrupted config
Fixes: 75a71ecc24 ("dpll: zl3073x: Register DPLL devices and pins")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251008141445.841113-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
