FEAT_NV2 is pretty terrible for anything that tries to enforce immediate
effects, and writing to ICH_HCR_EL2 in the hope to disable a maintenance
interrupt is vain. This only hits memory, and the guest hasn't cleared
anything -- the MI will fire.
For example, running the vgic_irq test under NV results in about 800
maintenance interrupts being actually handled by the L1 guest,
when none were expected.
As a cheap workaround, read back ICH_MISR_EL2 after writing 0 to
ICH_HCR_EL2. This is very cheap on real HW, and causes a trap to
the host in NV, giving it the opportunity to retire the pending MI.
With this, the above test runs to completion without any MI being
actually handled.
Yes, this is really poor...
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-37-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Pretty much like the rest of the LR handling, deactivation of an
L2 interrupt gets reflected in the L1 LRs, and therefore must be
propagated into the L1 shadow state if the interrupt is HW-bound.
Instead of directly handling the active state (which looks a bit
off as it ignores locking and L1->L0 HW propagation), use the new
deactivation primitive to perform the deactivation and deal with
the required maintenance.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-36-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The current approach to nested GICv3 support is to not do anything
while L2 is running, wait a transition from L2 to L1 to resync
LRs, VMCR and HCR, and only then evaluate the state to decide
whether to generate a maintenance interrupt.
This doesn't provide a good quality of emulation, and it would be
far preferable to find out early that we need to perform a switch.
Move the LRs/VMCR and HCR resync into vgic_v3_sync_nested(), so
that we have most of the state available. As we turning the vgic
off at this stage to avoid a screaming host MI, add a new helper
vgic_v3_flush_nested() that switches the vgic on again. The MI can
then be directly injected as required.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-35-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
CPUs lacking TDIR always trap ICV_DIR_EL1, no matter what, since
we have ICH_HCR_EL2.TC set permanently. For these CPUs, it is
useless to use a broadcast kick on SPI injection, as the sole
purpose of this is to set TDIR.
We can therefore skip this on these CPUs, which are challenged
enough not to be burdened by extra IPIs. As a consequence,
permanently set the TDIR bit in the shadow state to notify the
fast-path emulation code of the exit reason.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-34-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Even when we have either an LR overflow or SPIs in flight, it is
extremely likely that the interrupt being deactivated is still in
the LRs, and that going all the way back to the the generic trap
handling code is a waste of time.
Instead, try and deactivate in place when possible, and only if
this fails, perform a full exit.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-33-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
SPIs are specially annpying, as they can be activated on a CPU and
deactivated on another. WHich means that when an SPI is in flight
anywhere, all CPUs need to have their TDIR trap bit set.
This translates into broadcasting an IPI across all CPUs to make sure
they set their trap bit, The number of in-flight SPIs is kept in
an atomic variable so that CPUs can turn the trap bit off as soon
as possible.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-32-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Now that we are ready to handle deactivation through ICV_DIR_EL1,
set the trap bit if we have active interrupts outside of the LRs.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-31-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The GICv2 SGIs require additional handling for deactivation, as they
are effectively multiple interrrupts muxed into one. Make sure we
check for the source CPU when deactivating.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-30-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Deactivation via ICV_DIR_EL1 is both relatively straightforward
(we have the interrupt that needs deactivation) and really awkward.
The main issue is that the interrupt may either be in an LR on
another CPU, or ourside of any LR.
In the former case, we process the deactivation is if ot was
a write to GICD_CACTIVERn, which is already implemented as a big
hammer IPI'ing all vcpus. In the latter case, we just perform
a normal deactivation, similar to what we do for EOImode==0.
Another annoying aspect is that we need to tell the CPU owning
the interrupt that its ap_list needs laudering. We use a brand new
vcpu request to that effect.
Note that this doesn't address deactivation via the GICV MMIO view,
which will be taken care of in a later change.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-29-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Now that we can identify interrupts that have not made it into the LRs,
it becomes relatively easy to use EOIcount to walk the overflow list.
What is a bit odd is that we compute a fake LR for the original
state of the interrupt, clear the active bit, and feed into the existing
logic for processing. In a way, this is what would have happened if
the interrupt was in an LR.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-28-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Add the maintenance interrupt to force an exit when the guest
enables/disables individual groups, so that we can resort the
ap_list accordingly.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-27-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Interrupts in the ap_list that cannot be acted upon because they
are not enabled, or that their group is not enabled, shouldn't
make it into the LRs if we are space-constrained.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-26-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Having established that pending interrupts should have priority
to be moved into the LRs over the active interrupts, implement this
in the ap_list sorting.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-25-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Make the internal crystal ball global, so that implementation-specific
code can use it.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-24-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Now that we always reconfigure the vgic HCR register on entry,
the "enable" part of kvm_vgic_vcpu_enable() is pretty useless.
Removing the enable bits from these functions makes it plain that
they are just about computing the reset state. Just rename the
functions accordingly.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-23-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
We currently don't use the maintenance interrupt very much, apart
from EOI on level interrupts, and for LR underflow in limited cases.
However, as we are moving toward a setup where active interrupts
can live outside of the LRs, we need to use the MIs in a more
diverse set of cases.
Add a new helper that produces a digest of the ap_list, and use
that summary to set the various control bits as required.
This slightly changes the way v2 SGIs are handled, as they used to
count for more than one interrupt, but not anymore.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-22-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
We currently save/restore the VMCR register in a pretty lazy way
(on load/put, consistently with what we do with the APRs).
However, we are going to need the group-enable bits that are backed
by VMCR on each entry (so that we can avoid injecting interrupts for
disabled groups).
Move the synchronisation from put to sync, which results in some minor
churn in the nVHE hypercalls to simplify things.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-21-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
As we are going to rely on the [G]ICH_HCR{,_EL2} register to be
programmed with MI information at all times, slightly de-optimise
the flush/sync code to always be called. This is rather lightweight
when no interrupts are in flight.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-20-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Split vgic_v2_populate_lr() into two helpers, so that we have another
primitive that computes the LR from a vgic_irq, but doesn't update
anything in the shadow structure.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-19-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
As we are going to need to handle deactivation for interrupts that
are not in the LRs, split vgic_v2_fold_lr_state() into a helper
that deals with a single interrupt, and the function that loops
over the used LRs.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-18-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Not programming GICH_HCR while no LRs are populated is a bit
of an issue, as we otherwise don't see any maintenance interrupt
when the guest interacts with the LRs.
Decouple the two and always program the control register, even when
we don't have to touch the LRs.
This is very similar to what we are already doing for GICv3.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-17-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
EOIcount is how the virtual CPU interface signals that the guest
is deactivating interrupts outside of the LRs when EOImode==0.
We therefore need to preserve that information so that we can find
out what actually needs deactivating, just like we already do on
GICv3.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-16-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Split vgic_v3_populate_lr() into two, so that we have another
primitive that computes the LR from a vgic_irq, but doesn't
update anything in the shadow structure.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-15-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
As we are going to need to handle deactivation for interrupts that
are not in the LRs, split vgic_v3_fold_lr_state() into a helper
that deals with a single interrupt, and the function that loops
over the used LRs.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-14-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Not programming ICH_HCR_EL2 while no LRs are populated is a bit
of an issue, as we otherwise don't see any maintenance interrupt
when the guest interacts with the LRs.
Decouple the two and always program the control register, even when
we don't have to touch the LRs.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-13-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
EOIcount is how the virtual CPU interface signals that the guest
is deactivating interrupts outside of the LRs when EOImode==0.
We therefore need to preserve that information so that we can find
out what actually needs deactivating.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-12-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Despite LPIs not having an active state, *virtual* LPIs do have
one, which gets cleared on EOI. So far, so good.
However, this leads to a small problem: when an active LPI is not
in the LRs, that EOImode==0 and that the guest EOIs it, EOIcount
doesn't get bumped up. Which means that in these condition, the
LPI would stay active forever.
Clearly, we can't have that. So if we spot an active LPI, we drop
that state. It's pretty pointless anyway, and only serves as a way
to trip SW over.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-11-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Add a bit of documentation describing how we are dealing with LR
overflow. This is mostly a braindump of how things are expected
to work. For now anyway.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-10-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
We currently cannot identify whether an interrupt is queued into
a LR. It wasn't needed until now, but that's about to change.
Add yet another flag to track that state.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-9-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
struct vgic_irq has grown over the years, in a rather bad way.
Repack it using bitfields so that the individual flags, and move
things around a bit so that it a bit smaller.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-8-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
A long time ago, an unsuspecting architect forgot to add a trap
bit for ICV_DIR_EL1 in ICH_HCR_EL2. Which was unfortunate, but
what's a bit of spec between friends? Thankfully, this was fixed
in a later revision, and ARM "deprecates" the lack of trapping
ability.
Unfortuantely, a few (billion) CPUs went out with that defect,
anything ARMv8.0 from ARM, give or take. And on these CPUs,
you can't trap DIR on its own, full stop.
As the next best thing, we can trap everything in the common group,
which is a tad expensive, but hey ho, that's what you get. You can
otherwise recycle the HW in the neaby bin.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-7-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
As we are about to start trapping a bunch of extra things, augment
the pKVM trap description with all the registers trapped by ICH_HCR_EL2.TC,
making them legal instead of resulting in a UNDEF injection in the guest.
While we're at it, ensure that pKVM captures the vgic model so that it
can be checked by the emulation code.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-6-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The trap bits are currently only set to manage CPU errata. However,
we are about to make use of them for purposes beyond beating broken
CPUs into submission.
For this purpose, turn these errata-driven bits into a patched-in
constant that is merged with the KVM-driven value at the point of
programming the ICH_HCR_EL2 register, rather than being directly
stored with with the shadow value..
This allows the KVM code to distinguish between a trap being handled
for the purpose of an erratum workaround, or for KVM's own need.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-5-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
It is all good and well to scream about spurious vGIC maintenance
interrupts. It would be even better to output the reason why, which
is already checked, but not printed out.
The unsuspecting kernel tinkerer thanks you.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-4-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Future changes will require KVM to be able to perform deactivations
by writing to the physical CPU interface. Add the corresponding
VA to the kvm_info structure, and let KVM stash it.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-3-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The GICH_HCR description is missing a bunch of control bits that
control the maintenance interrupt. Add them.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-2-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4lRQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylROwCfXKoJX39yhNjPuNdqVLp5wW4+1LsAn3fd7x0E
9czT0dxL2IipOWrV1ZMj
=Gu5v
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4l4g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym2zACgq0WPUJl3X/5+M0sWs9rd4afh2TMAn1RlLJZE
1Qj5OIhSn1v5SfkLyqXf
=Wn6c
-----END PGP SIGNATURE-----
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
a Clang build
- Make sure a Retbleed mitigation message is printed only when necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256 check is
needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which supports
assignable counters but where L3 total and local bandwidth monitoring has
been disabled at boot
-----BEGIN PGP SIGNATURE-----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=EZGc
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
subsystem after a rework
-----BEGIN PGP SIGNATURE-----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=oIwu
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
- Add one more Rust noreturn function to objtool's list
-----BEGIN PGP SIGNATURE-----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=d4ht
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
throttled otherwise task movement and manipulation would lead to dangling
cfs_rq references and an eventual crash
-----BEGIN PGP SIGNATURE-----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=8MbE
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
- In Device::parent(), do not make any assumptions on the device
context of the parent device.
- Check visibility before changing ownership of a sysfs attribute
group.
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL().
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs.
- Do not warn about a pending fw_devlink sync state.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaPyrfAAKCRBFlHeO1qrK
LoXVAP9tGeaWsoQgYUSBDZAGysWqwzar0xl27IOe40Mgg6xWDgEAmzPHt6KeQS7d
XhwHeFVRyQ8e04tPSlhI7qSLdeLLiwo=
=ID4F
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
A small collection of FireWire fixes. This includes collections to sparse
and API documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaPyn7gAKCRCsLtaWM8Lw
E1n9AQDZQBuY7/WiMS6GoIfCpyqwnpLG7xaMIofoLzrBD2DR/AD+PD683h4bjO5P
Th4pjtrlUtgmnvchmtCzZYaQUvMbAwk=
=IipF
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
Several RISC-V fixes for v6.18-rc3:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant macro
-----BEGIN PGP SIGNATURE-----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=g9cN
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaPyVuAAKCRBcsMJ8RxYu
Y7ctAYDUsUnEuqhD2kvGhED6GXXUv1Ibl6vliCqBUbTkaKpXAq1QJrJBYrpwiAh+
AVQyUoQBgNDi6zY1Ej85luZQEQCpTz6e9Z81Kwq5tBiCQz512SdmtluuzLJhkIt1
BCbAS69DMg==
=z2aZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
