commit fc1f91b923 upstream.
Recently we've been having mysterious hangs while running generic/475 on
the CI system. This turned out to be something like this:
Task 1
dmsetup suspend --nolockfs
-> __dm_suspend
-> dm_wait_for_completion
-> dm_wait_for_bios_completion
-> Unable to complete because of IO's on a plug in Task 2
Task 2
wb_workfn
-> wb_writeback
-> blk_start_plug
-> writeback_sb_inodes
-> Infinite loop unable to make an allocation
Task 3
cache_block_group
->read_extent_buffer_pages
->Waiting for IO to complete that can't be submitted because Task 1
suspended the DM device
The problem here is that we need Task 2 to be scheduled completely for
the blk plug to flush. Normally this would happen, we normally wait for
the block group caching to finish (Task 3), and this schedule would
result in the block plug flushing.
However if there's enough free space available from the current caching
to satisfy the allocation we won't actually wait for the caching to
complete. This check however just checks that we have enough space, not
that we can make the allocation. In this particular case we were trying
to allocate 9MiB, and we had 10MiB of free space, but we didn't have
9MiB of contiguous space to allocate, and thus the allocation failed and
we looped.
We specifically don't cycle through the FFE loop until we stop finding
cached block groups because we don't want to allocate new block groups
just because we're caching, so we short circuit the normal loop once we
hit LOOP_CACHING_WAIT and we found a caching block group.
This is normally fine, except in this particular case where the caching
thread can't make progress because the DM device has been suspended.
Fix this by not only waiting for free space to >= the amount of space we
want to allocate, but also that we make some progress in caching from
the time we start waiting. This will keep us from busy looping when the
caching is taking a while but still theoretically has enough space for
us to allocate from, and fixes this particular case by forcing us to
actually sleep and wait for forward progress, which will flush the plug.
With this fix we're no longer hanging with generic/475.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a78d5db9c upstream.
Simulated chips use a mutex for synchronization in driver callbacks so
they must not be called from interrupt context. Set the can_sleep field
of the GPIO chip to true to force users to only use threaded irqs.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f83d13de upstream.
The WinSystems WS16C48 I/O address region spans offsets 0x0 through 0xA,
which is a total of 11 bytes. Fix the WS16C48_EXTENT define to the
correct value of 11 so that access to necessary device registers is
properly requested in the ws16c48_probe() callback by the
devm_request_region() function call.
Fixes: 2c05a0f29f ("gpio: ws16c48: Implement and utilize register structures")
Cc: stable@vger.kernel.org
Cc: Paul Demetrotion <pdemetrotion@winsystems.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6db541ae27 upstream.
If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.
Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().
Fixes: dff515a3e7 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23cc5f6674 upstream.
Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.
The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.
Fixes: dff515a3e7 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d78a671eb8 upstream.
Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.
If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.
Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().
Fixes: dff515a3e7 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 411c565b4b upstream.
If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.
Fixes: c98d9cc417 ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db17ba719b upstream.
Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.
When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.
Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.
Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.
Fixes: dff515a3e7 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aab8e1a200 upstream.
Handling pci errors should fully teardown and load back auxiliary
devices, same as done through mlx5 health recovery flow.
Fixes: 72ed5d5624 ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d006207625 upstream.
When device is in error state, marked by the flag
MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible
and so clock update work should be skipped. Furthermore, such access
through PCI in error state, after calling mlx5_pci_disable_device() can
result in failing to recover from pci errors.
Fixes: ef9814deaf ("net/mlx5e: Add HW timestamping (TS) support")
Reported-and-tested-by: Ganesh G R <ganeshgr@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/9bdb9b9d-140a-7a28-f0de-2e64e873c068@nvidia.com
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dc2b3922d upstream.
When querying eswitch functions 0 is a valid number of host VFs. After
introducing ARM SRIOV falling through to getting the max value from PCI
results in using the total VFs allowed on the ARM for the host.
Fixes: 86eec50bea ("net/mlx5: Support querying max VFs from device");
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bfe1e19fb upstream.
Fixing wrong calculation of the modify hdr pattern size,
where the previously calculated number would not be enough
to accommodate the required number of actions.
Fixes: da5d0027d6 ("net/mlx5: DR, Add cache for modify header pattern")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac5da544a3 upstream.
The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.
The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
hex dump (first 32 bytes):
01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................
98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA....
backtrace:
[<00000000e992680d>] kmalloc_trace+0x27/0x120
[<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
[<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
[<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
[<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
[<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
[<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
[<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
[<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
[<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
[<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
[<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
[<0000000082dd6c8b>] netlink_unicast+0x438/0x710
[<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
[<0000000016e92590>] sock_sendmsg+0xc5/0x190
So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases.
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 863676fe1a upstream.
Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712193505.3440752-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a46781c89 upstream.
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92ea ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e3d20617b upstream.
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.
strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.
One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:
Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE
The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.
Fixes: 1cf3d5567f ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8743aeff5b upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: 8a1bbabb03 ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10d3d9df4 upstream.
rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging
to a specific resilient nexthop group. The function returns a positive
return code (the skb length) upon both success and failure.
The above behavior is problematic. When a complete nexthop bucket dump
is requested, the function that walks the different nexthops treats the
non-zero return code as an error. This causes buckets belonging to
different resilient nexthop groups to be dumped using different buffers
even if they can all fit in the same buffer:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 10 index 0 idle_time 10.27 nhid 1
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 20 index 0 idle_time 6.44 nhid 1
[...]
Fix by only returning a non-zero return code when an error occurred and
restarting the dump from the bucket index we failed to fill in. This
allows buckets belonging to different resilient nexthop groups to be
dumped using the same buffer:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 30.21 nhid 1
id 20 index 0 idle_time 26.7 nhid 1
[...]
While this change is more of a performance improvement change than an
actual bug fix, it is a prerequisite for a subsequent patch that does
fix a bug.
Fixes: 8a1bbabb03 ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 913f60cacd upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.
# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:
# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: ab84be7e54 ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0168042a2 upstream.
The workaround implemented in commit 3222b5b613 ("net: enetc:
initialize RFS/RSS memories for unused ports too") is no longer
effective after commit 6fffbc7ae1 ("PCI: Honor firmware's device
disabled status"). Thus, it has introduced a regression and we see AER
errors being reported again:
$ ip link set sw2p0 up && dhclient -i sw2p0 && ip addr show sw2p0
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 2.5Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp2: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control off
sja1105 spi2.2 sw2p0: configuring for phy/rgmii-id link mode
sja1105 spi2.2 sw2p0: Link is Up - 1Gbps/Full - flow control off
pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
pcieport 0000:00:1f.0: AER: can't find device of ID0000
Rob's suggestion is to reimplement the enetc driver workaround as a
PCI fixup, and to modify the PCI core to run the fixups for all PCI
functions. This change handles the first part.
We refactor the common code in enetc_psi_create() and enetc_psi_destroy(),
and use the PCI fixup only for those functions for which enetc_pf_probe()
won't get called. This avoids some work being done twice for the PFs
which are enabled.
Fixes: 6fffbc7ae1 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac6257a3ae upstream.
When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093] __switch_to+0x7c/0xbc
[ 3147.261183] __schedule+0x338/0x6f0
[ 3147.265357] schedule+0x50/0xe0
[ 3147.269185] schedule_preempt_disabled+0x18/0x24
[ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880] __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839] mutex_lock+0x50/0x60
[ 3147.288841] rtnl_lock+0x20/0x2c
[ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718] hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109] process_one_work+0x1d0/0x490
[ 3147.319805] worker_thread+0x158/0x3d0
[ 3147.324240] kthread+0x108/0x13c
[ 3147.328154] ret_from_fork+0x10/0x18
In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().
This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().
Fixes: 04b6ba1435 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6265e242f7 upstream.
In some configure flow of hns3 driver, for example, change mtu, it will
disable MAC through firmware before configuration. But firmware disables
MAC asynchronously. The rx traffic may be not stopped in this case.
So fixes it by waiting until mac link is down.
Fixes: a9775bb64a ("net: hns3: fix set and get link ksettings issue")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08469dacfa upstream.
Some nic configurations could only be performed after link is down. So this
patch refactor this API for reuse.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a94c16a2fd upstream.
When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:
$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down
This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.
Fixes: 7c83a7c539 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7791cec23 upstream.
Since the AR8032 part does not support wol, remove related callbacks
from it.
Fixes: 5800091a20 ("net: phy: at803x: add support for AR8032 PHY")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Cc: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b47808f22 upstream.
TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.
Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.
The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.
We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".
Allocate a single dummy page and use it as fallback.
Found by code inspection, and proven by forcing allocation
failures.
Fixes: e7b159a48b ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ac8480ae4 upstream.
During bnxt_re_dev_init(), when bnxt_re_setup_chip_ctx() fails unregister
with L2 first before bailing out probe.
Fixes: ae8637e131 ("RDMA/bnxt_re: Add chip context to identify 57500 series")
Link: https://lore.kernel.org/r/1691642677-21369-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5363fc488d upstream.
ib_dealloc_device() should be called only after device cleanup. Fix the
dealloc sequence.
Fixes: 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/1691642677-21369-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 186b169cf1 upstream.
Fixing the ODP registration flow to set the iova correctly.
The calculation in ib_umem_num_dma_blocks() function assumes the iova of
the umem is set correctly.
When iova is not set, the calculation in ib_umem_num_dma_blocks() is
equivalent to length/page_size, which is true only when memory is aligned.
For unaligned memory, iova must be set for the ALIGN() in the
ib_umem_num_dma_blocks() to take effect and return a correct value.
mlx5_ib uses ib_umem_num_dma_blocks() to decide the mkey size to use for
the MR. Without this fix, when registering unaligned ODP MR, a wrong
size mkey might be chosen and this might cause the UMR to fail.
UMR would fail over insufficient size to update the mkey translation:
infiniband mlx5_0: dump_cqe:273:(pid 0): dump error cqe
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 0f 00 78 06 25 00 00 58 00 da ac d2
infiniband mlx5_0: mlx5_ib_post_send_wait:806:(pid 20311): reg umr
failed (6)
infiniband mlx5_0: pagefault_real_mr:661:(pid 20311): Failed to update
mkey page tables
Fixes: f0093fb1a7 ("RDMA/mlx5: Move mlx5_ib_cont_pages() to the creation of the mlx5_ib_mr")
Fixes: a665aca89a ("RDMA/umem: Split ib_umem_num_pages() into ib_umem_num_dma_blocks()")
Signed-off-by: Artemy Kovalyov <artemyko@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/3d4be7ca2155bf239dd8c00a2d25974a92c26ab8.1689757344.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fb9a9fb71 upstream.
AP_VLAN interfaces are virtual, so doesn't really exist as a type for
capabilities. When passed in as a type, AP is the one that's really intended.
Fixes: c4cbaf7973 ("cfg80211: Add support for HE")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43dae319b5 upstream.
Userspace should not be able to trigger DRM_ERROR messages to spam the
logs; especially not through atomic commit parameters which are
completely legitimate for userspace to attempt.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 7707f7227f ("drm/rockchip: Add support for afbc")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230808104405.522493-1-daniels@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9d699af3f upstream.
On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.
Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.
Fixes: 5eb9a43140 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727100131.2338127-1-treapking@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ad1dfc144 upstream.
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary. Downgrade to debug instead.
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fdfaef71f upstream.
During hotplug remove it is possible that the update counters work
might be pending, and may run after memory has been freed.
Cancel the update counters work before freeing memory.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/169099756100.3927190.15284930454106475280.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fb1d8eb23 upstream.
Add fdir_fltr_lock locking in unprotected places.
The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which
iterates over all filters and looks for a duplicate. The filter can be
removed from list and freed from memory at the same time it's being
compared. All other places where filters are deleted are already
protected with spinlock.
The remaining changes protect adapter->fdir_active_fltr variable so now
all its uses are under a spinlock.
Fixes: 527691bf06 ("iavf: Support IPv4 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807205011.3129224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1c936e9af upstream.
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e132 ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59eeb23294 upstream.
Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().
Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().
Fixes: 7df13219d7 ("tun: reserve extra headroom only when XDP is set")
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Link: https://lore.kernel.org/r/20230803185947.2379988-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a47e598fbd upstream.
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01f4fd2708 upstream.
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add bond0 type bond mode 0
# ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
# ip netns exec ns1 ip link set bond_slave_1 master bond0
# ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set bond_slave_1 nomaster
# ip netns del ns1
The logical analysis of the problem is as follows:
1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
vlan_vid_add()
vlan_info_alloc()
__vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1
2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
vlan_vid_add()
__vlan_vid_add()
vlan_add_rx_filter_info()
if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
return 0;
if (netif_device_present(dev))
return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
// The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.
3. detach bond_slave_1 from bond0:
__bond_release_one()
vlan_vids_del_by_dev()
list_for_each_entry(vid_info, &vlan_info->vid_list, list)
vlan_vid_del(dev, vid_info->proto, vid_info->vid);
// bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
// bond_slave_1->vlan_info will be assigned NULL.
4. delete vlan10 during delete ns1:
default_device_exit_batch()
dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!
Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85c2c79a07 upstream.
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a7ac3d205 upstream.
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a70ed9520 upstream.
Before this code is copied, add the missing family, as we did in
commit 3dd344ea84 ("net: tracepoint: exposing sk_family in all tcp:tracepoints")
Fixes: 15fcdf6ae1 ("tcp: Add tracepoint for tcp_set_ca_state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ping Gan <jacky_gam_2001@163.com>
Cc: Manjusaka <me@manjusaka.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a8c251cff upstream.
The blamed commit has broken probing on
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0
(PCI function 0) has status = "disabled".
Background: pci_scan_slot() has logic to say that if the function 0 of a
device is absent, the entire device is absent and we can skip the other
functions entirely. Traditionally, this has meant that
pci_bus_read_dev_vendor_id() returns an error code for that function.
However, since the blamed commit, there is an extra confounding
condition: function 0 of the device exists and has a valid vendor id,
but it is disabled in the device tree. In that case, pci_scan_slot()
would incorrectly skip the entire device instead of just that function.
In the case of NXP LS1028A, status = "disabled" does not mean that the
PCI function's config space is not available for reading. It is, but the
Ethernet port is just not functionally useful with a particular SerDes
protocol configuration (0x9999) due to pinmuxing constraints of the Soc.
So, pci_scan_slot() skips all other functions on the ENETC ECAM
(enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had
to not be probed.
There is an additional regression introduced by the change, caused by
its fundamental premise. The enetc driver needs to run code for all PCI
functions, regardless of whether they're enabled or not in the device
tree. That is no longer possible if the driver's probe function is no
longer called. But Rob recommends that we move the of_device_is_available()
detection to dev->match_driver, and this makes the PCI fixups still run
on all functions, while just probing drivers for those functions that
are enabled. So, a separate change in the enetc driver will have to move
the workarounds to a PCI fixup.
Fixes: 6fffbc7ae1 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
