[ Upstream commit 5ec8ca26fe ]
Jakub reports spurious failures of the 'conntrack_reverse_clash.sh'
selftest. A bogus test makes nat core resort to port rewrite even
though there is no need for this.
When the test is made, nf_nat_used_tuple() would already have caused us
to return if no other CPU had added a colliding entry.
Moreover, nf_nat_used_tuple() would have ignored the colliding entry if
their origin tuples had been the same.
All that is left to check is if the colliding entry in the hash table
is subject to NAT, and, if its not, if our entry matches in the reverse
direction, e.g. hash table has
addr1:1234 -> addr2:80, and we want to commit
addr2:80 -> addr1:1234.
Because we already checked that neither the new nor the committed entry is
subject to NAT we only have to check origin vs. reply tuple:
for non-nat entries, the reply tuple is always the inverted original.
Just in case there are more problems extend the error reporting
in the selftest while at it and dump conntrack table/stats on error.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/
Fixes: d8f84a9bc7 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 885bebac99 ]
Set the error code if "transferred != sizeof(cmd)" instead of
returning success.
Fixes: dbafc28955 ("NFC: pn533: don't send USB data off of the stack")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aTfIJ9tZPmeUF4W1@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a11ff0948 ]
The cffrml_receive() function extracts a length field from the packet
header and, when FCS is disabled, subtracts 2 from this length without
validating that len >= 2.
If an attacker sends a malicious packet with a length field of 0 or 1
to an interface with FCS disabled, the subtraction causes an integer
underflow.
This can lead to memory exhaustion and kernel instability, potential
information disclosure if padding contains uninitialized kernel memory.
Fix this by validating that len >= 2 before performing the subtraction.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: b482cd2053 ("net-caif: add CAIF core protocol stack")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/SYBPR01MB7881511122BAFEA8212A1608AFA6A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8a81b0ce5 ]
Jakub says: "We try to reserve SKIP for tests skipped because tool is
missing in env, something isn't built into the kernel etc."
use xfail, we can't force the race condition to appear at will
so its expected that the test 'fails' occasionally.
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175647.5c32f419@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad891bb3d0 ]
The IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure()
without ensuring skb->dev is set, leading to a NULL pointer dereference
in fib_compute_spec_dst() when ipv4_link_failure() attempts to send
ICMP destination unreachable messages.
The issue emerged after commit ed0de45a10 ("ipv4: recompile ip options
in ipv4_link_failure") started calling __ip_options_compile() from
ipv4_link_failure(). This code path eventually calls fib_compute_spec_dst()
which dereferences skb->dev. An attempt was made to fix the NULL skb->dev
dereference in commit 0113d9c9d1 ("ipv4: fix null-deref in
ipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev)
dereference by using a fallback device. The fix was incomplete because
fib_compute_spec_dst() later in the call chain still accesses skb->dev
directly, which remains NULL when IPVS calls dst_link_failure().
The crash occurs when:
1. IPVS processes a packet in NAT mode with a misconfigured destination
2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route
3. The error path calls dst_link_failure(skb) with skb->dev == NULL
4. ipv4_link_failure() → ipv4_send_dest_unreach() →
__ip_options_compile() → fib_compute_spec_dst()
5. fib_compute_spec_dst() dereferences NULL skb->dev
Apply the same fix used for IPv6 in commit 326bf17ea5 ("ipvs: fix
ipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev before
calling dst_link_failure().
KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f]
CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2
RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233
RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285
Call Trace:
<TASK>
spec_dst_fill net/ipv4/ip_options.c:232
spec_dst_fill net/ipv4/ip_options.c:229
__ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330
ipv4_send_dest_unreach net/ipv4/route.c:1252
ipv4_link_failure+0x702/0xb80 net/ipv4/route.c:1265
dst_link_failure include/net/dst.h:437
__ip_vs_get_out_rt+0x15fd/0x19e0 net/netfilter/ipvs/ip_vs_xmit.c:412
ip_vs_nat_xmit+0x1d8/0xc80 net/netfilter/ipvs/ip_vs_xmit.c:764
Fixes: ed0de45a10 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Slavin Liu <slavin452@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e2a720766 ]
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called.
Fixes: be102eb6a0 ("netfilter: nf_conncount: rework API to use sk_buff directly")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 006a5035b4 ]
We have been seeing occasional deadlocks on pernet_ops_rwsem since
September in NIPA. The stuck task was usually modprobe (often loading
a driver like ipvlan), trying to take the lock as a Writer.
lockdep does not track readers for rwsems so the read wasn't obvious
from the reports.
On closer inspection the Reader holding the lock was conntrack looping
forever in nf_conntrack_cleanup_net_list(). Based on past experience
with occasional NIPA crashes I looked thru the tests which run before
the crash and noticed that the crash follows ip_defrag.sh. An immediate
red flag. Scouring thru (de)fragmentation queues reveals skbs sitting
around, holding conntrack references.
The problem is that since conntrack depends on nf_defrag_ipv6,
nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first its
netns exit hooks run _after_ conntrack's netns exit hook.
Flush all fragment queue SKBs during fqdir_pre_exit() to release
conntrack references before conntrack cleanup runs. Also flush
the queues in timer expiry handlers when they discover fqdir->dead
is set, in case packet sneaks in while we're running the pre_exit
flush.
The commit under Fixes is not exactly the culprit, but I think
previously the timer firing would eventually unblock the spinning
conntrack.
Fixes: d5dd88794a ("inet: fix various use-after-free in defrags units")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251207010942.1672972-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1231eec699 ]
Instead of exporting inet_frag_rbtree_purge() which requires that
caller takes care of memory accounting, add a new helper. We will
need to call it from a few places in the next patch.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251207010942.1672972-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 006a5035b4 ("inet: frags: flush pending skbs in fqdir_pre_exit()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ef522c8a5 ]
In ip_frag_reinit() we want to move the frag timeout timer into
the future. If the timer fires in the meantime we inadvertently
scheduled it again, and since the timer assumes a ref on frag_queue
we need to acquire one to balance things out.
This is technically racy, we should have acquired the reference
_before_ we touch the timer, it may fire again before we take the ref.
Avoid this entire dance by using mod_timer_pending() which only modifies
the timer if its pending (and which exists since Linux v2.6.30)
Note that this was the only place we ever took a ref on frag_queue
since Eric's conversion to RCU. So we could potentially replace
the whole refcnt field with an atomic flag and a bit more RCU.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251207010942.1672972-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91dc09a609 ]
Fix
tfo.c: In function ‘run_server’:
tfo.c:84:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by evaluating the return value from read() and displaying an error message
if it reports an error.
Fixes: c65b5bb232 ("selftests: net: add passive TFO test binary")
Cc: David Wei <dw@davidwei.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-14-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59546e8744 ]
Fix
ksft.h: In function ‘ksft_ready’:
ksft.h:27:9: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’
ksft.h: In function ‘ksft_wait’:
ksft.h:51:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by checking the return value of the affected functions and displaying
an error message if an error is seen.
Fixes: 2b6d490b82 ("selftests: drv-net: Factor out ksft C helpers")
Cc: Joe Damato <jdamato@fastly.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-11-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b3db3e11 ]
On execution path with raised B44_FLAG_EXTERNAL_PHY, b44_readphy()
leaves bmcr value uninitialized and it is used later in the code.
Add check of this flag at the beginning of the b44_nway_reset() and
exit early of the function with restarting autonegotiation if an
external PHY is used.
Fixes: 753f492093 ("[B44]: port to native ssb support")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251205155815.4348-1-bigalex934@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7477a427 ]
The new icssg-prueth driver needs the same dependency as the other parts
that use the ptp-1588:
WARNING: unmet direct dependencies detected for TI_ICSS_IEP
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PTP_1588_CLOCK_OPTIONAL [=m] && TI_PRUSS [=y]
Selected by [y]:
- TI_PRUETH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PRU_REMOTEPROC [=y] && NET_SWITCHDEV [=y]
Add the correct dependency on the two drivers missing it, and remove
the pointless 'imply' in the process.
Fixes: e654b85a69 ("net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0 platforms")
Fixes: 511f6c1ae0 ("net: ti: icssm-prueth: Adds ICSSM Ethernet driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251204100138.1034175-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ace7ef87f ]
The push_nsh() action structure looks like this:
OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...))
The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by the
nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost
OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested()
inside nsh_key_put_from_nlattr(). But nothing checks if the attribute
in the middle is OK. We don't even check that this attribute is the
OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data()
calls - first time directly while calling validate_push_nsh() and the
second time as part of the nla_for_each_nested() macro, which isn't
safe, potentially causing invalid memory access if the size of this
attribute is incorrect. The failure may not be noticed during
validation due to larger netlink buffer, but cause trouble later during
action execution where the buffer is allocated exactly to the size:
BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
Read of size 184 at addr ffff88816459a634 by task a.out/22624
CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary)
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x70
print_address_description.constprop.0+0x2c/0x390
kasan_report+0xdd/0x110
kasan_check_range+0x35/0x1b0
__asan_memcpy+0x20/0x60
nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
push_nsh+0x82/0x120 [openvswitch]
do_execute_actions+0x1405/0x2840 [openvswitch]
ovs_execute_actions+0xd5/0x3b0 [openvswitch]
ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch]
genl_family_rcv_msg_doit+0x1d6/0x2b0
genl_family_rcv_msg+0x336/0x580
genl_rcv_msg+0x9f/0x130
netlink_rcv_skb+0x11f/0x370
genl_rcv+0x24/0x40
netlink_unicast+0x73e/0xaa0
netlink_sendmsg+0x744/0xbf0
__sys_sendto+0x3d6/0x450
do_syscall_64+0x79/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Let's add some checks that the attribute is properly sized and it's
the only one attribute inside the action. Technically, there is no
real reason for OVS_KEY_ATTR_NSH to be there, as we know that we're
pushing an NSH header already, it just creates extra nesting, but
that's how uAPI works today. So, keeping as it is.
Fixes: b2d0f5d5dc ("openvswitch: enable NSH support")
Reported-by: Junvy Yang <zhuque@tencent.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron echaudro@redhat.com
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251204105334.900379-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0373d5c387 ]
For XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is not
correct. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may be
looping within NAPI and some event flags may be set in earlier
iterations. In particular, if BNXT_TX_EVENT is set earlier indicating
some XDP_TX packets are ready and pending, it will be cleared if it is
XDP_TX action again. Normally, we will set BNXT_TX_EVENT again when we
successfully call __bnxt_xmit_xdp(). But if the TX ring has no more
room, the flag will not be set. This will cause the TX producer to be
ahead but the driver will not hit the TX doorbell.
For multi-buf XDP_TX, there is no need to clear the event flags and set
BNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier in
bnxt_rx_pkt().
The visible symptom of this is that the RX ring associated with the
TX XDP ring will eventually become empty and all packets will be dropped.
Because this condition will cause the driver to not refill the RX ring
seeing that the TX ring has forever pending XDP_TX packets.
The fix is to only clear BNXT_RX_EVENT when we have successfully
called __bnxt_xmit_xdp().
Fixes: 7f0a168b04 ("bnxt_en: Add completion ring pointer in TX and RX ring structures")
Reported-by: Pavel Dubovitsky <pdubovitsky@meta.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251203003024.2246699-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ac1dacec4 ]
Cited commit added a dedicated mutex (instead of RTNL) to protect the
multicast route list, so that it will not change while the driver
periodically traverses it in order to update the kernel about multicast
route stats that were queried from the device.
One instance of list entry deletion (during route replace) was missed
and it can result in a use-after-free [1].
Fix by acquiring the mutex before deleting the entry from the list and
releasing it afterwards.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum]
Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043
CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 #1 PREEMPT(full)
Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum]
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
print_report+0x174/0x4f5
kasan_report+0xdf/0x110
mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum]
process_one_work+0x9cc/0x18e0
worker_thread+0x5df/0xe40
kthread+0x3b8/0x730
ret_from_fork+0x3e9/0x560
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 29933:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum]
mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum]
process_one_work+0x9cc/0x18e0
worker_thread+0x5df/0xe40
kthread+0x3b8/0x730
ret_from_fork+0x3e9/0x560
ret_from_fork_asm+0x1a/0x30
Freed by task 29933:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x43/0x70
kfree+0x14e/0x700
mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum]
mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum]
process_one_work+0x9cc/0x18e0
worker_thread+0x5df/0xe40
kthread+0x3b8/0x730
ret_from_fork+0x3e9/0x560
ret_from_fork_asm+0x1a/0x30
Fixes: f38656d067 ("mlxsw: spectrum_mr: Protect multicast route list with a lock")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f996feecfd59fde297964bfc85040b6d83ec6089.1764695650.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0e69763e ]
We sometimes observe use-after-free when dereferencing a neighbour [1].
The problem seems to be that the driver stores a pointer to the
neighbour, but without holding a reference on it. A reference is only
taken when the neighbour is used by a nexthop.
Fix by simplifying the reference counting scheme. Always take a
reference when storing a neighbour pointer in a neighbour entry. Avoid
taking a referencing when the neighbour is used by a nexthop as the
neighbour entry associated with the nexthop already holds a reference.
Tested by running the test that uncovered the problem over 300 times.
Without this patch the problem was reproduced after a handful of
iterations.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310
Read of size 8 at addr ffff88817f8e3420 by task ip/3929
CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full)
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6e/0x300
print_report+0xfc/0x1fb
kasan_report+0xe4/0x110
mlxsw_sp_neigh_entry_update+0x2d4/0x310
mlxsw_sp_router_rif_gone_sync+0x35f/0x510
mlxsw_sp_rif_destroy+0x1ea/0x730
mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0
__mlxsw_sp_inetaddr_lag_event+0xcc/0x130
__mlxsw_sp_inetaddr_event+0xf5/0x3c0
mlxsw_sp_router_netdevice_event+0x1015/0x1580
notifier_call_chain+0xcc/0x150
call_netdevice_notifiers_info+0x7e/0x100
__netdev_upper_dev_unlink+0x10b/0x210
netdev_upper_dev_unlink+0x79/0xa0
vrf_del_slave+0x18/0x50
do_set_master+0x146/0x7d0
do_setlink.isra.0+0x9a0/0x2880
rtnl_newlink+0x637/0xb20
rtnetlink_rcv_msg+0x6fe/0xb90
netlink_rcv_skb+0x123/0x380
netlink_unicast+0x4a3/0x770
netlink_sendmsg+0x75b/0xc90
__sock_sendmsg+0xbe/0x160
____sys_sendmsg+0x5b2/0x7d0
___sys_sendmsg+0xfd/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0xfd0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[...]
Allocated by task 109:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7b/0x90
__kmalloc_noprof+0x2c1/0x790
neigh_alloc+0x6af/0x8f0
___neigh_create+0x63/0xe90
mlxsw_sp_nexthop_neigh_init+0x430/0x7e0
mlxsw_sp_nexthop_type_init+0x212/0x960
mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280
mlxsw_sp_nexthop6_group_get+0x392/0x6a0
mlxsw_sp_fib6_entry_create+0x46a/0xfd0
mlxsw_sp_router_fib6_replace+0x1ed/0x5f0
mlxsw_sp_router_fib6_event_work+0x10a/0x2a0
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20
Freed by task 154:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kmem_cache_free_bulk.part.0+0x1eb/0x5e0
kvfree_rcu_bulk+0x1f2/0x260
kfree_rcu_work+0x130/0x1b0
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20
Last potentially related work creation:
kasan_save_stack+0x30/0x50
kasan_record_aux_stack+0x8c/0xa0
kvfree_call_rcu+0x93/0x5b0
mlxsw_sp_router_neigh_event_work+0x67d/0x860
process_one_work+0xd57/0x1390
worker_thread+0x4d6/0xd40
kthread+0x355/0x5b0
ret_from_fork+0x1d4/0x270
ret_from_fork_asm+0x11/0x20
Fixes: 6cf3c971dc ("mlxsw: spectrum_router: Add private neigh table")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/92d75e21d95d163a41b5cea67a15cd33f547cba6.1764695650.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6b638bda2 ]
mlxsw_sp_router_schedule_work() takes a reference on a neighbour,
expecting a work item to release it later on. However, we might fail to
schedule the work item, in which case the neighbour reference count will
be leaked.
Fix by taking the reference just before scheduling the work item. Note
that mlxsw_sp_router_schedule_work() can receive a NULL neighbour
pointer, but neigh_clone() handles that correctly.
Spotted during code review, did not actually observe the reference count
leak.
Fixes: 151b89f602 ("mlxsw: spectrum_router: Reuse work neighbor initialization in work scheduler")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ec2934ae4aca187a8d8c9329a08ce93cca411378.1764695650.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c57ff008a ]
Packets with pkt_type == PACKET_LOOPBACK are captured by
handle_frame() function, but they don't have L2 header.
We should not process them in handle_mode_l2().
This doesn't affect old L2 functionality, since handling
was anyway incorrect.
Handle them the same way as in br_handle_frame():
just pass the skb.
To observe invalid behaviour, just start "ping -b" on bcast address
of port-interface.
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20251202103906.4087675-1-skorodumov.dmitry@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f0638b124 ]
When support for RTL8211F(D)(I)-VD-CG was introduced in commit
bb726b753f ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
the implementation assumed that this PHY model doesn't have the
control register PHYCR2 (Page 0xa43 Address 0x19). This
assumption was based on the differences in CLKOUT configurations
between RTL8211FVD and the remaining RTL8211F PHYs. In the latter
commit 2c67301584
("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present")
this assumption was expanded to the PHY-mode EEE.
I performed tests on RTL8211FI-VD-CG and confirmed that disabling
PHY-mode EEE works correctly and is uniform with other PHYs
supported by the driver. To validate the correctness,
I contacted Realtek support. Realtek confirmed that PHY-mode EEE on
RTL8211F(D)(I)-VD-CG is configured via Page 0xa43 Address 0x19 bit 5.
Moreover, Realtek informed me that the most recent datasheet
for RTL8211F(D)(I)-VD-CG v1.1 is incomplete and the naming of
control registers is partly inconsistent. The errata I
received from Realtek corrects the naming as follows:
| Register | Datasheet v1.1 | Errata |
|-------------------------|----------------|--------|
| Page 0xa44 Address 0x11 | PHYCR2 | PHYCR3 |
| Page 0xa43 Address 0x19 | N/A | PHYCR2 |
This information confirms that the supposedly missing control register,
PHYCR2, exists in the RTL8211F(D)(I)-VD-CG under the same address and
the same name. It controls widely the same configs as other PHYs from
the RTL8211F series (e.g. PHY-mode EEE). Clock out configuration is an
exception.
Given all this information, restore disabling of the PHY-mode EEE.
Fixes: 2c67301584 ("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present")
Signed-off-by: Ivan Galkin <ivan.galkin@axis.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251202-phy_eee-v1-1-fe0bf6ab3df0@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4465ae435d ]
To simplify the rtl8211f_config_init() control flow and get rid of
"early" returns for PHYs where the PHYCR2 register is absent, move the
entire logic sub-block that deals with disabling PHY-mode EEE to a
separate function. There, it is much more obvious what the early
"return 0" skips, and it becomes more difficult to accidentally skip
unintended stuff.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4f0638b124 ("net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb78b71faf ]
Previous changes have replaced the machine-level priv->phycr2 with a
high-level priv->disable_clk_out. This created a discrepancy with
priv->phycr1 which is resolved here, for uniformity.
One advantage of this new implementation is that we don't read
priv->phycr1 in rtl821x_probe() if we're never going to modify it.
We never test the positive return code from phy_modify_mmd_changed(), so
we could just as well use phy_modify_mmd().
I took the ALDPS feature description from commit d90db36a9e ("net:
phy: realtek: add dt property to enable ALDPS mode") and transformed it
into a function comment - the feature is sufficiently non-obvious to
deserve that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4f0638b124 ("net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a31c41be ]
Add CLKOUT disable support for RTL8211F(D)(I)-VD-CG. Like with other PHY
variants, this feature might be requested by customers when the clock
output is not used, in order to reduce electromagnetic interference (EMI).
In the common driver, the CLKOUT configuration is done through PHYCR2.
The RTL_8211FVD_PHYID is singled out as not having that register, and
execution in rtl8211f_config_init() returns early after commit
2c67301584 ("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not
present").
But actually CLKOUT is configured through a different register for this
PHY. Instead of pretending this is PHYCR2 (which it is not), just add
some code for modifying this register inside the rtl8211f_disable_clk_out()
function, and move that outside the code portion that runs only if
PHYCR2 exists.
In practice this reorders the PHYCR2 writes to disable PHY-mode EEE and
to disable the CLKOUT for the normal RTL8211F variants, but this should
be perfectly fine.
It was not noted that RTL8211F(D)(I)-VD-CG would need a genphy_soft_reset()
call after disabling the CLKOUT. Despite that, we do it out of caution
and for symmetry with the other RTL8211F models.
Co-developed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4f0638b124 ("net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 910ac7bfb1 ]
This variable is assigned in rtl821x_probe() and used in
rtl8211f_config_init(), which is more complex than it needs to be.
Simply testing the same condition from rtl821x_probe() in
rtl8211f_config_init() yields the same result (the PHY driver ID is a
runtime invariant), but with one temporary variable less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4f0638b124 ("net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27033d0691 ]
The RTL8211F(D)(I)-VD-CG PHY also has support for disabling the CLKOUT,
and we'd like to introduce the "realtek,clkout-disable" property for
that.
But it isn't done through the PHYCR2 register, and it becomes awkward to
have the driver pretend that it is. So just replace the machine-level
"u16 phycr2" variable with a logical "bool disable_clk_out", which
scales better to the other PHY as well.
The change is a complete functional equivalent. Before, if the device
tree property was absent, priv->phycr2 would contain the RTL8211F_CLKOUT_EN
bit as read from hardware. Now, we don't save priv->phycr2, but we just
don't call phy_modify_paged() on it. Also, we can simply call
phy_modify_paged() with the "set" argument to 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4f0638b124 ("net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd7671ef4c ]
The enable_mpesw() function returns -EINVAL if ldev->mode is not
MLX5_LAG_MODE_NONE. This means attempting to enable MPESW mode when it's
already enabled will fail. In contrast, disable_mpesw() properly checks
if the mode is MLX5_LAG_MODE_MPESW before proceeding, making it
naturally idempotent and safe to call multiple times.
Fix enable_mpesw() to return success if mpesw is already enabled.
Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1764602008-1334866-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce052b9402 ]
zdi-disclosures@trendmicro.com says:
The vulnerability is a race condition between `ets_qdisc_dequeue` and
`ets_qdisc_change`. It leads to UAF on `struct Qdisc` object.
Attacker requires the capability to create new user and network namespace
in order to trigger the bug.
See my additional commentary at the end of the analysis.
Analysis:
static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
...
// (1) this lock is preventing .change handler (`ets_qdisc_change`)
//to race with .dequeue handler (`ets_qdisc_dequeue`)
sch_tree_lock(sch);
for (i = nbands; i < oldbands; i++) {
if (i >= q->nstrict && q->classes[i].qdisc->q.qlen)
list_del_init(&q->classes[i].alist);
qdisc_purge_queue(q->classes[i].qdisc);
}
WRITE_ONCE(q->nbands, nbands);
for (i = nstrict; i < q->nstrict; i++) {
if (q->classes[i].qdisc->q.qlen) {
// (2) the class is added to the q->active
list_add_tail(&q->classes[i].alist, &q->active);
q->classes[i].deficit = quanta[i];
}
}
WRITE_ONCE(q->nstrict, nstrict);
memcpy(q->prio2band, priomap, sizeof(priomap));
for (i = 0; i < q->nbands; i++)
WRITE_ONCE(q->classes[i].quantum, quanta[i]);
for (i = oldbands; i < q->nbands; i++) {
q->classes[i].qdisc = queues[i];
if (q->classes[i].qdisc != &noop_qdisc)
qdisc_hash_add(q->classes[i].qdisc, true);
}
// (3) the qdisc is unlocked, now dequeue can be called in parallel
// to the rest of .change handler
sch_tree_unlock(sch);
ets_offload_change(sch);
for (i = q->nbands; i < oldbands; i++) {
// (4) we're reducing the refcount for our class's qdisc and
// freeing it
qdisc_put(q->classes[i].qdisc);
// (5) If we call .dequeue between (4) and (5), we will have
// a strong UAF and we can control RIP
q->classes[i].qdisc = NULL;
WRITE_ONCE(q->classes[i].quantum, 0);
q->classes[i].deficit = 0;
gnet_stats_basic_sync_init(&q->classes[i].bstats);
memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats));
}
return 0;
}
Comment:
This happens because some of the classes have their qdiscs assigned to
NULL, but remain in the active list. This commit fixes this issue by always
removing the class from the active list before deleting and freeing its
associated qdisc
Reproducer Steps
(trimmed version of what was sent by zdi-disclosures@trendmicro.com)
```
DEV="${DEV:-lo}"
ROOT_HANDLE="${ROOT_HANDLE👎}"
BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2
PING_BYTES="${PING_BYTES:-48}"
PING_COUNT="${PING_COUNT:-200000}"
PING_DST="${PING_DST:-127.0.0.1}"
SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}"
SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}"
SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}"
cleanup() {
tc qdisc del dev "$DEV" root 2>/dev/null
}
trap cleanup EXIT
ip link set "$DEV" up
tc qdisc del dev "$DEV" root 2>/dev/null || true
tc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2
tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \
tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT"
tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2
tc -s qdisc ls dev $DEV
ping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \
>/dev/null 2>&1 &
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2
tc -s qdisc ls dev $DEV
tc qdisc del dev "$DEV" parent 1:2 || true
tc -s qdisc ls dev $DEV
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 1 strict 1
```
KASAN report
```
==================================================================
BUG: KASAN: slab-use-after-free in ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481
Read of size 8 at addr ffff8880502fc018 by task ping/12308
>
CPU: 0 UID: 0 PID: 12308 Comm: ping Not tainted 6.18.0-rc4-dirty #1 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
__dump_stack kernel/lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 kernel/lib/dump_stack.c:120
print_address_description kernel/mm/kasan/report.c:378
print_report+0x156/0x4c9 kernel/mm/kasan/report.c:482
kasan_report+0xdf/0x110 kernel/mm/kasan/report.c:595
ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481
dequeue_skb kernel/net/sched/sch_generic.c:294
qdisc_restart kernel/net/sched/sch_generic.c:399
__qdisc_run+0x1c9/0x1b00 kernel/net/sched/sch_generic.c:417
__dev_xmit_skb kernel/net/core/dev.c:4221
__dev_queue_xmit+0x2848/0x4410 kernel/net/core/dev.c:4729
dev_queue_xmit kernel/./include/linux/netdevice.h:3365
[...]
Allocated by task 17115:
kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56
kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77
poison_kmalloc_redzone kernel/mm/kasan/common.c:400
__kasan_kmalloc+0xaa/0xb0 kernel/mm/kasan/common.c:417
kasan_kmalloc kernel/./include/linux/kasan.h:262
__do_kmalloc_node kernel/mm/slub.c:5642
__kmalloc_node_noprof+0x34e/0x990 kernel/mm/slub.c:5648
kmalloc_node_noprof kernel/./include/linux/slab.h:987
qdisc_alloc+0xb8/0xc30 kernel/net/sched/sch_generic.c:950
qdisc_create_dflt+0x93/0x490 kernel/net/sched/sch_generic.c:1012
ets_class_graft+0x4fd/0x800 kernel/net/sched/sch_ets.c:261
qdisc_graft+0x3e4/0x1780 kernel/net/sched/sch_api.c:1196
[...]
Freed by task 9905:
kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56
kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77
__kasan_save_free_info+0x3b/0x70 kernel/mm/kasan/generic.c:587
kasan_save_free_info kernel/mm/kasan/kasan.h:406
poison_slab_object kernel/mm/kasan/common.c:252
__kasan_slab_free+0x5f/0x80 kernel/mm/kasan/common.c:284
kasan_slab_free kernel/./include/linux/kasan.h:234
slab_free_hook kernel/mm/slub.c:2539
slab_free kernel/mm/slub.c:6630
kfree+0x144/0x700 kernel/mm/slub.c:6837
rcu_do_batch kernel/kernel/rcu/tree.c:2605
rcu_core+0x7c0/0x1500 kernel/kernel/rcu/tree.c:2861
handle_softirqs+0x1ea/0x8a0 kernel/kernel/softirq.c:622
__do_softirq kernel/kernel/softirq.c:656
[...]
Commentary:
1. Maher Azzouzi working with Trend Micro Zero Day Initiative was reported as
the person who found the issue. I requested to get a proper email to add to the
reported-by tag but got no response. For this reason i will credit the person
i exchanged emails with i.e zdi-disclosures@trendmicro.com
2. Neither i nor Victor who did a much more thorough testing was able to
reproduce a UAF with the PoC or other approaches we tried. We were both able to
reproduce a null ptr deref. After exchange with zdi-disclosures@trendmicro.com
they sent a small change to be made to the code to add an extra delay which
was able to simulate the UAF. i.e, this:
qdisc_put(q->classes[i].qdisc);
mdelay(90);
q->classes[i].qdisc = NULL;
I was informed by Thomas Gleixner(tglx@linutronix.de) that adding delays was
acceptable approach for demonstrating the bug, quote:
"Adding such delays is common exploit validation practice"
The equivalent delay could happen "by virt scheduling the vCPU out, SMIs,
NMIs, PREEMPT_RT enabled kernel"
3. I asked the OP to test and report back but got no response and after a
few days gave up and proceeded to submit this fix.
Fixes: de6d25924c ("net/sched: sch_ets: don't peek at classes beyond 'nbands'")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20251128151919.576920-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8e032cd24 ]
The ERR007885 will lead to a TDAR race condition for mutliQ when the
driver sets TDAR and the UDMA clears TDAR simultaneously or in a small
window (2-4 cycles). And it will cause the udma_tx and udma_tx_arbiter
state machines to hang. Therefore, the commit 53bb20d1fa ("net: fec:
add variable reg_desc_active to speed things up") and the commit
a179aad12b ("net: fec: ERR007885 Workaround for conventional TX") have
added the workaround to fix the potential issue for the conventional TX
path. Similarly, the XDP TX path should also have the potential hang
issue, so add the workaround for XDP TX path.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251128025915.2486943-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a157e0a0a ]
In gfs2_chain_bio(), the call to bio_chain() has its arguments swapped.
The result is leaked bios and incorrect synchronization (only the last
bio will actually be waited for). This code is only used during mount
and filesystem thaw, so the bug normally won't be noticeable.
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8b38d1985 ]
The new platform uses the QCA2066 chip along with a new board ID, which
requires a dedicated firmware file to ensure proper initialization.
Without this entry, the driver cannot locate and load the correct
firmware, resulting in Bluetooth bring-up failure.
This patch adds a new entry to the firmware table for QCA2066 so that
the driver can correctly identify the board ID and load the appropriate
firmware from 'qca/QCA2066/' in the linux-firmware repository.
Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 991f8a79db ]
ksmbd maintains delete-on-close and pending-delete state in
ksmbd_inode->m_flags. In vfs_cache.c this field is accessed under
inconsistent locking: some paths read and modify m_flags under
ci->m_lock while others do so without taking the lock at all.
Examples:
- ksmbd_query_inode_status() and __ksmbd_inode_close() use
ci->m_lock when checking or updating m_flags.
- ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close()
used to read and modify m_flags without ci->m_lock.
This creates a potential data race on m_flags when multiple threads
open, close and delete the same file concurrently. In the worst case
delete-on-close and pending-delete bits can be lost or observed in an
inconsistent state, leading to confusing delete semantics (files that
stay on disk after delete-on-close, or files that disappear while still
in use).
Fix it by:
- Making ksmbd_query_inode_status() look at m_flags under ci->m_lock
after dropping inode_hash_lock.
- Adding ci->m_lock protection to all helpers that read or modify
m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()).
- Keeping the existing ci->m_lock protection in __ksmbd_inode_close(),
and moving the actual unlink/xattr removal outside the lock.
This unifies the locking around m_flags and removes the data race while
preserving the existing delete-on-close behaviour.
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39a1833cc ]
Under high concurrency, A tree-connection object (tcon) is freed on
a disconnect path while another path still holds a reference and later
executes *_put()/write on it.
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 269df046c1 ]
__process_request() will not print error messages if smb2_ioctl()
always returns 0.
Fix this by returning the correct value at the end of function.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff1fb6d8b ]
Commit e4a8b5481c ("gfs2: Switch to wait_event in gfs2_quotad") broke
cyclic statfs syncing, so the numbers reported by "df" could easily get
completely out of sync with reality. Fix this by reverting part of
commit e4a8b5481c for now.
A follow-up commit will clean this code up later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c10ed927 ]
When a node tries to delete an inode, it first requests exclusive access
to the iopen glock. This triggers demote requests on all remote nodes
currently holding the iopen glock. To satisfy those requests, the
remote nodes evict the inode in question, or they poke the corresponding
inode glock to signal that the inode is still in active use.
This behavior doesn't depend on whether or not a filesystem is
read-only, so remove the incorrect read-only check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f04ee216b ]
The xfstests' test-case generic/101 leaves HFS+ volume
in corrupted state:
sudo ./check generic/101
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/101 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/101.full for details)
Ran: generic/101
Failures: generic/101
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Invalid volume free block count
(It should be 2614350 instead of 2614382)
Verify Status: VIStat = 0x8000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
This test executes such steps: "Test that if we truncate a file
to a smaller size, then truncate it to its original size or
a larger size, then fsyncing it and a power failure happens,
the file will have the range [first_truncate_size, last_size[ with
all bytes having a value of 0x00 if we read it the next time
the filesystem is mounted.".
HFS+ keeps volume's free block count in the superblock.
However, hfsplus_file_fsync() doesn't store superblock's
content. As a result, superblock contains not correct
value of free blocks if a power failure happens.
This patch adds functionality of saving superblock's
content during hfsplus_file_fsync() call.
sudo ./check generic/101
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #96 SMP PREEMPT_DYNAMIC Wed Nov 19 12:47:37 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/101 32s ... 30s
Ran: generic/101
Passed all 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled appears to be OK.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251119223219.1824434-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54df8b80cc ]
[BUG]
When a scrub failed immediately without any byte scrubbed, the returned
btrfs_scrub_progress::last_physical will always be 0, even if there is a
non-zero @start passed into btrfs_scrub_dev() for resume cases.
This will reset the progress and make later scrub resume start from the
beginning.
[CAUSE]
The function btrfs_scrub_dev() accepts a @progress parameter to copy its
updated progress to the caller, there are cases where we either don't
touch progress::last_physical at all or copy 0 into last_physical:
- last_physical not updated at all
If some error happened before scrubbing any super block or chunk, we
will not copy the progress, leaving the @last_physical untouched.
E.g. failed to allocate @sctx, scrubbing a missing device or even
there is already a running scrub and so on.
All those cases won't touch @progress at all, resulting the
last_physical untouched and will be left as 0 for most cases.
- Error out before scrubbing any bytes
In those case we allocated @sctx, and sctx->stat.last_physical is all
zero (initialized by kvzalloc()).
Unfortunately some critical errors happened during
scrub_enumerate_chunks() or scrub_supers() before any stripe is really
scrubbed.
In that case although we will copy sctx->stat back to @progress, since
no byte is really scrubbed, last_physical will be overwritten to 0.
[FIX]
Make sure the parameter @progress always has its @last_physical member
updated to @start parameter inside btrfs_scrub_dev().
At the very beginning of the function, set @progress->last_physical to
@start, so that even if we error out without doing progress copying,
last_physical is still at @start.
Then after we got @sctx allocated, set sctx->stat.last_physical to
@start, this will make sure even if we didn't get any byte scrubbed, at
the progress copying stage the @last_physical is not left as zero.
This should resolve the resume progress reset problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e5a110c0 ]
The Acer A1 840 tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-BayTrail.txt as nvram file which is a bit
too generic.
Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Acer A1 840 tablet.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251103100314.353826-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066f417be5 ]
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: druth@chromium.org
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a27b73943 ]
When changing the interface type, all activity on the interface has
to be stopped first. This was done independent of existing code in
cfg80211_leave(), so didn't handle e.g. background radar detection.
Use cfg80211_leave() to handle it the same way.
Note that cfg80211_leave() behaves slightly differently for IBSS in
wireless extensions, it won't send an event in that case. We could
handle that, but since nl80211 was used to change the type, IBSS is
rare, and wext is already a corner case, it doesn't seem worth it.
Link: https://patch.msgid.link/20251121174021.922ef48ce007.I970c8514252ef8a864a7fbdab9591b71031dee03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
