commit e4037689a3 upstream.
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Manish Nagar <manish.nagar@oss.qualcomm.com>
Link: https://patch.msgid.link/20251120074435.1983091-1-manish.nagar@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46b28d2fbd upstream.
The PCI device IDs were organised based on the Intel
architecture generation in most cases, but not with every
ID. That left the device ID table with no real order.
Sorting the table based on the device ID.
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107121548.2702900-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c57ce99ec6 upstream.
This patch adds the necessary PCI ID for Intel Nova Lake -S
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251106115926.2317877-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26d56a9fcb upstream.
When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.
The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.
This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().
The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().
Fixes: eb2a86ae8c ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b59d4fda7e upstream.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
new_pba comes from the status packet returned after each write.
A bogus device could report values beyond the block count derived
from info->capacity, letting the driver walk off the end of
pba_to_lba[] and corrupt heap memory.
Reject PBAs that exceed the computed block count and fail the
transfer so we avoid touching out-of-range mapping entries.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df5fde297e upstream.
A report from Oleg Smirnov indicates that the unusual_devs quirks
entry for the Novatek camera does not need to override the subclass
and protocol parameters:
[3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00
[3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3266355.333043] usb 1-3: Product: YICARCAM
[3266355.333045] usb 1-3: Manufacturer: XIAO-YI
[3266355.333047] usb 1-3: SerialNumber: 966110000000100
[3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected
[3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000
[3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1)
Please send a copy of this message to
<linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>
The overrides are harmless but they do provoke the driver into logging
this annoying message. Update the entry to remove the unneeded entries.
Reported-by: stealth <oleg.smirnov.1988@gmail.com>
Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/
Fixes: 6ca8af3c8f ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera")
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41e99fe200 upstream.
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages.
Fixes: a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()")
Cc: stable <stable@kernel.org>
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ec39d2cd8 upstream.
The driver uses pcim_enable_device() to enable the PCI device,
the device will be automatically disabled on driver detach through
the managed device framework. The manual pci_disable_device() calls
in the error paths are therefore redundant and should be removed.
Found via static anlaysis and this is similar to commit 99ca0b57e4
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20251026090859.33107-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baadf2a5c2 upstream.
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures.
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Fixes: 4b12709026 ("most: usb: Fix use-after-free in hdm_disconnect")
Fixes: a8cc9e5fcb ("most: usb: hdm_probe: Fix calling put_device() before device initialization")
Cc: stable@vger.kernel.org
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251029093029.28922-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb4917f557 upstream.
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst:
"In some circumstances dma_map_single(), ...
will fail to create a mapping. A driver can check for these errors
by testing the returned DMA address with dma_mapping_error()."
Found via static analysis and this is similar to commit fa0308134d
("ALSA: memalloc: prefer dma_mapping_error() over explicit address checking")
Fixes: 58ac1b3799 ("ARM: PL011: Fix DMA support")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://patch.msgid.link/20251027092053.87937-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27fd028601 upstream.
When __mptcp_retrans() kicks-in, it schedules one or more subflows for
retransmission, but such subflows could be actually left alone if there
is no more data to retransmit and/or in case of concurrent fallback.
Scheduled subflows could be processed much later in time, i.e. when new
data will be transmitted, leading to bad subflow selection.
Explicitly clear all scheduled subflows before leaving the
retransmission function.
Fixes: ee2708aeda ("mptcp: use get_retrans wrapper")
Cc: stable@vger.kernel.org
Reported-by: Filip Pokryvka <fpokryvk@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251125-net-mptcp-clear-sched-rtx-v1-1-1cea4ad2165f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747528729c upstream.
Commit 27e8fe0da3 ("mmc: sdhci-of-dwcmshc: Prevent stale command
interrupt handling") clears pending interrupts when resetting
host->pending_reset to ensure no pending stale interrupts after
sdhci_threaded_irq restores interrupts. But this fix is only added for
th1520 platforms, in fact per my test, this issue exists on all
dwcmshc users, such as cv1800b, sg2002, and synaptics platforms.
So promote the above reset handling from th1520 to ip level. And keep
reset handling on rk, sg2042 and bf3 as is, until it's confirmed that
the same issue exists on these platforms too.
Fixes: 017199c284 ("mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de8798965f upstream.
When allocating hugetlb folios for memfd, three initialization steps are
missing:
1. Folios are not zeroed, leading to kernel memory disclosure to userspace
2. Folios are not marked uptodate before adding to page cache
3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache()
The memfd allocation path bypasses the normal page fault handler
(hugetlb_no_page) which would handle all of these initialization steps.
This is problematic especially for udmabuf use cases where folios are
pinned and directly accessed by userspace via DMA.
Fix by matching the initialization pattern used in hugetlb_no_page():
- Zero the folio using folio_zero_user() which is optimized for huge pages
- Mark it uptodate with folio_mark_uptodate()
- Take hugetlb_fault_mutex before adding to page cache to prevent races
The folio_zero_user() change also fixes a potential security issue where
uninitialized kernel memory could be disclosed to userspace through read()
or mmap() operations on the memfd.
Link: https://lkml.kernel.org/r/20251112145034.2320452-1-kartikey406@gmail.com
Fixes: 89c1905d9c ("mm/gup: introduce memfd_pin_folios() for pinning memfd folios")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20251112031631.2315651-1-kartikey406@gmail.com/ [v1]
Closes: https://syzkaller.appspot.com/bug?extid=f64019ba229e3a5c411b
Suggested-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: syzbot+f64019ba229e3a5c411b@syzkaller.appspotmail.com
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com> (v2)
Cc: Christoph Hellwig <hch@lst.de> (v6)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0fcf70c68 upstream.
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915 ("firmware: stratix10-svc: extend svc to support new RSU features")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96cf850093 upstream.
The function qcom_slim_ngd_notify_slaves() calls of_slim_get_device() which
internally uses device_find_child() to obtain a device reference.
According to the device_find_child() documentation,
the caller must drop the reference with put_device() after use.
Found via static analysis and this is similar to commit 4e65bda827
("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251027060601.33228-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3575254546 upstream.
Intel Wildcat Lake derives its Thunderbolt/USB4 controller from Lunar
Lake platform. Add Wildcat Lake PCI ID to the driver list of supported
devices.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3184b6a5a2 upstream.
When having a multiuser mount with domain= specified and using
cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,
so it needs to be freed before leaving cifs_construct_tcon().
This fixes the following memory leak reported by kmemleak:
mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,...
su - testuser
cifscreds add -d ZELDA -u testuser
...
ls /mnt/1
...
umount /mnt
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8881203c3f08 (size 8):
comm "ls", pid 5060, jiffies 4307222943
hex dump (first 8 bytes):
5a 45 4c 44 41 00 cc cc ZELDA...
backtrace (crc d109a8cf):
__kmalloc_node_track_caller_noprof+0x572/0x710
kstrdup+0x3a/0x70
cifs_sb_tlink+0x1209/0x1770 [cifs]
cifs_get_fattr+0xe1/0xf50 [cifs]
cifs_get_inode_info+0xb5/0x240 [cifs]
cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs]
cifs_getattr+0x28e/0x450 [cifs]
vfs_getattr_nosec+0x126/0x180
vfs_statx+0xf6/0x220
do_statx+0xab/0x110
__x64_sys_statx+0xd5/0x130
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f2aee329a6 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40f8d17eed upstream.
The sysdev_is_parent check was being used to infer PCI devices that have
the DMA mask set from the PCI capabilities, but sysdev_is_parent is also
used for non-PCI ACPI devices in which case the DMA mask would be the
bus default or as set by the _DMA method.
Without this fix the DMA mask would default to 32-bits and so allocation
would fail if there was no DRAM below 4GB.
Fixes: 47ce45906c ("usb: dwc3: leave default DMA for PCI devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251107104437.1602509-1-punit.agrawal@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe680d8c74 upstream.
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76544beea7 upstream.
Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
to be reset. If we ever reach the condition of handling more than
`SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop body.
This may, among other issues, cause us to never `netif_wake_queue()` again
after a transmission interrupt.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Cc: stable@vger.kernel.org
Co-developed-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251116-sun4i-fix-loop-v1-1-3d76d3f81950@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30db4451c7 upstream.
Reading the interrupt register `SJA1000_IR` causes all of its bits to be
reset. If we ever reach the condition of handling more than
`SJA1000_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop
body.
This may, among other issues, cause us to never `netif_wake_queue()`
again after a transmission interrupt.
Fixes: 429da1cc84 ("can: Driver for the SJA1000 CAN controller")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251115153437.11419-1-tmuehlbacher@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c884a0b27b upstream.
In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to:
usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM)
That function can return NULL in some cases. Even when it returns
NULL, though, we still go on to call btusb_mtk_claim_iso_intf().
As of commit e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for
usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf()
when `btmtk_data->isopkt_intf` is NULL will cause a crash because
we'll end up passing a bad pointer to device_lock(). Prior to that
commit we'd pass the NULL pointer directly to
usb_driver_claim_interface() which would detect it and return an
error, which was handled.
Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check
at the start of the function. This makes the code handle a NULL
`btmtk_data->isopkt_intf` the same way it did before the problematic
commit (just with a slight change to the error message printed).
Reported-by: IncogCyberpunk <incogcyberpunk@proton.me>
Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info
Fixes: e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()")
Cc: stable@vger.kernel.org
Tested-by: IncogCyberpunk <incogcyberpunk@proton.me>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82fca3d8a4 upstream.
Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.
The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().
In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.
This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.
Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251120120657.2462194-1-hanguidong02@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b03346314 upstream.
The i.MX6UL reference manual lists two possible interrupt lines for
SAI3 (56 and 57, offset +32). The current device tree entry uses
the first one (24), which prevents IRQs from being handled properly.
Use the second interrupt line (25), which does allow interrupts
to work as expected.
Fixes: 36e2edf6ac ("ARM: dts: imx6ul: add sai support")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89ee35567 upstream.
According to the board design, set SEL to high means flipped
connection (TX2/RX2). And the TCPM will output logical 1 if it needs
flipped connection. So switch to active high for select-gpios.
The EN pin on mux chip is low active, so switch to active low for
enable-gpios too.
Fixes: b237975b2c ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b6677d645 upstream.
Swap interrupt numbers of eqos because the below commit just swap
interrupt-names and missed swap interrupts also.
The driver (drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c) use
interrupt-names to get irq numbers.
Fixes: f29c19a6e4 ("arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c83fc13960 upstream.
Integrated amplifier LEAK Stereo 230 by IAG Limited has built-in
ESS9038Q2M DAC served by XMOS controller. It supports both DSD Native
and DSD-over-PCM (DoP) operational modes. But it doesn't work properly
by default and tries DSD-to-PCM conversion. USB quirks below allow it
to operate as designed.
Add DSD_RAW quirk flag for IAG Limited devices (vendor ID 0x2622)
Add DSD format quirk for LEAK Stereo 230 (USB ID 0x2622:0x0061)
Signed-off-by: Ivan Zhaldak <i.v.zhaldak@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251117125848.30769-1-i.v.zhaldak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b042fdf18e upstream.
When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel
calls vm_ops->close on each portion. For trace buffer mappings, this
results in ring_buffer_unmap() being called multiple times while
ring_buffer_map() was only called once.
This causes ring_buffer_unmap() to return -ENODEV on subsequent calls
because user_mapped is already 0, triggering a WARN_ON.
Trace buffer mappings cannot support partial mappings because the ring
buffer structure requires the complete buffer including the meta page.
Fix this by adding a may_split callback that returns -EINVAL to prevent
VMA splits entirely.
Cc: stable@vger.kernel.org
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://patch.msgid.link/20251119064019.25904-1-kartikey406@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a72c325b042aae6403c7
Tested-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Reported-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 841ecc979b upstream.
Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries. Therefore allocate an array
for uniquification instead of placing too an small array on the stack.
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.17+: 9f048fa487: MIPS: mm: Prevent a TLB shutdown on initial uniquification
Cc: stable@vger.kernel.org # v6.17+
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f048fa487 upstream.
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b45744bf0 upstream.
The vshunt/current reported register is a signed 16bit integer. The
sign bit index should be '15', not '16'.
Fixes: 4396f45d21 ("iio: adc: Add rtq6056 support")
Reported-by: Andy Hsu <andy_ya_hsu@wiwynn.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd886cdcbf upstream.
Use correct argument to iio_str_to_fixpoint() to parse 3 decimal places.
iio_str_to_fixpoint() has a bit of an unintuitive API where the
fract_mult parameter is the multiplier of the first decimal place as if
it was already an integer. So to get 3 decimal places, fract_mult must
be 100 rather than 1000.
Fixes: 96ccdbc07a ("staging:iio:adc:ad7280a: Standardize extended ABI naming")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c92c1bc408 upstream.
There is an race-condition where device is not full working after SW reset.
Therefore it's necessary to wait some time after reset and verify shadow
registers values by reading and comparing the values before/after reset.
This mechanism is described in datasheet at least from revision D.
Fixes: 12ed27863e ("iio: accel: Add driver support for ADXL355")
Signed-off-by: Valek Andrej <andrej.v@skyrain.eu>
Signed-off-by: Kessler Markus <markus.kessler@hilti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3aa385a9c7 upstream.
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:
Unable to handle kernel NULL pointer dereference at virtual
address 00000001 when read
PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4
This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.
Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a6b7989ff upstream.
Initially st,adc-alt-channel property was defined as an enum in the DFSDM
binding. The DFSDM binding has been changed to use the new IIO backend
framework, along with the adoption of IIO generic channels.
In this new binding st,adc-alt-channel is defined as a boolean property,
but it is still handled has an enum in DFSDM driver.
Fix st,adc-alt-channel property handling in DFSDM driver.
Fixes: 3208fa0cd9 ("iio: adc: stm32-dfsdm: adopt generic channels bindings")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21553258b9 upstream.
If an error occurs after a successful mfd_add_devices() call, it should be
undone by a corresponding mfd_remove_devices() call, as already done in the
remove function.
Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3af0c1fb1c upstream.
The `decimator` and `batch` fields of struct st_lsm6dsx_settings
are arrays indexed by sensor type, not by sensor hardware
identifier; moreover, the `batch` field is only used for the
accelerometer and gyroscope.
Change the array size for `decimator` from ST_LSM6DSX_MAX_ID to
ST_LSM6DSX_ID_MAX, and change the array size for `batch` from
ST_LSM6DSX_MAX_ID to 2; move the enum st_lsm6dsx_sensor_id
definition so that the ST_LSM6DSX_ID_MAX value is usable within
the struct st_lsm6dsx_settings definition.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb372b4f46 upstream.
According to the ABI the units after application of scale and offset are
milli degree celsius for temperature thresholds and milli percent for
relative humidity thresholds. Currently the resulting units are degree
celsius for temperature thresholds and hysteresis and percent for relative
humidity thresholds and hysteresis. Change scale factor to fix this issue.
Fixes: 3ad0e7e5f0 ("iio: humidity: hdc3020: add threshold events support")
Reported-by: Chris Lesiak <chris.lesiak@licorbio.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b8dc11c0a upstream.
According to the ABI the units after application of scale and offset are
milli degrees for temperature measurements and milli percent for relative
humidity measurements. Currently the resulting units are degree celsius for
temperature measurements and percent for relative humidity measurements.
Change scale factor to fix this issue.
Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Chris Lesiak <chris.lesiak@licorbio.com>
Suggested-by: Chris Lesiak <chris.lesiak@licorbio.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a514bb109e upstream.
Add a new buffer accessor .get_dma_dev() in order to get the
struct device responsible for actually providing the dma channel. We
cannot assume that we can use the parent of the IIO device for mapping
the DMA buffer. This becomes important on systems (like the Xilinx/AMD
zynqMP Ultrascale) where memory (or part of it) is mapped above the
32 bit range. On such systems and given that a device by default has
a dma mask of 32 bits we would then need to rely on bounce buffers (to
swiotlb) for mapping memory above the dma mask limit.
In the process, add an iio_buffer_get_dma_dev() helper function to get
the proper DMA device.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3db847df99 upstream.
Wire up the .get_dma_dev() callback to use the DMA buffer infrastructure's
implementation. This ensures that DMABUF operations use the correct DMA
device for mapping, which is essential for proper operation on systems
where memory is mapped above the 32-bit range.
Without this callback, the core would fall back to using the IIO device's
parent, which may not have the appropriate DMA mask configuration for
high memory access.
Fixes: 7a86d46998 ("iio: buffer-dmaengine: Support new DMABUF based userspace API")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9c198c3cc upstream.
Implement the .get_dma_dev() callback for DMA buffers by returning the
device that owns the DMA channel. This allows the core DMABUF
infrastructure to properly map DMA buffers using the correct device,
avoiding the need for bounce buffers on systems where memory is mapped
above the 32-bit range.
The function returns the DMA queue's device, which is the actual device
responsible for DMA operations in buffer-dma implementations.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d08340d1e upstream.
This reverts commit 83f44ae0f8.
Currently we store initial stacktrace entry twice for non-HW ot_regs, which
means callers that fail perf_hw_regs(regs) condition in perf_callchain_kernel.
It's easy to reproduce this bpftrace:
# bpftrace -e 'tracepoint:sched:sched_process_exec { print(kstack()); }'
Attaching 1 probe...
bprm_execve+1767
bprm_execve+1767
do_execveat_common.isra.0+425
__x64_sys_execve+56
do_syscall_64+133
entry_SYSCALL_64_after_hwframe+118
When perf_callchain_kernel calls unwind_start with first_frame, AFAICS
we do not skip regs->ip, but it's added as part of the unwind process.
Hence reverting the extra perf_callchain_store for non-hw regs leg.
I was not able to bisect this, so I'm not really sure why this was needed
in v5.2 and why it's not working anymore, but I could see double entries
as far as v5.10.
I did the test for both ORC and framepointer unwind with and without the
this fix and except for the initial entry the stacktraces are the same.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3126c9ccb4 upstream.
This reverts commit 2681bf4ae8.
This results in a blank screen on the HDMI port on some systems.
Revert for now so as not to regress 6.18, can be addressed
in 6.19 once the issue is root caused.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652
Cc: Sunpeng.Li@amd.com
Cc: ivan.lipski@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0e9de7a81)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd9862f726 ]
On BCM6358 (and also observed on BCM6368) the controller appears to
only generate as many SPI clocks as bytes that have been written into
the TX FIFO. For RX-only transfers the driver programs the transfer
length in SPI_MSG_CTL but does not write anything into the FIFO, so
chip select is deasserted early and the RX transfer segment is never
fully clocked in.
A concrete failing case is a three-transfer MAC address read from
SPI-NOR:
- TX 0x03 (read command)
- TX 3-byte address
- RX 6 bytes (MAC)
In contrast, a two-transfer JEDEC-ID read (0x9f + 6-byte RX) works
because the driver uses prepend_len and writes dummy bytes into the
TX FIFO for the RX part.
Fix this by writing 0xff dummy bytes into the TX FIFO for RX-only
segments so that the number of bytes written to the FIFO matches the
total message length seen by the controller.
Fixes: b17de07606 ("spi/bcm63xx: work around inability to keep CS up")
Signed-off-by: Hang Zhou <929513338@qq.com>
Link: https://patch.msgid.link/tencent_7AC88FCB3076489A4A7E6C2163DF1ACF8D06@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
