[ Upstream commit 5ade47c974 ]
Add missing READ_ONCE() when reading ipv6.sysctl.flowlabel_reflect,
as its value can be changed under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e69fda4d07 ]
According to Wi-Fi Aware (TM) 4.0 specification 2.8, A NAN device can
have one NAN management interface. This applies also to multi radio
devices.
The current code allows a driver to support more than one NAN interface,
if those are not in the same radio.
Fix it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107135129.fdaecec0fe8a.I246b5ba6e9da3ec1481ff197e47f6ce0793d7118@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5151c9b6e ]
Currently ath12k_pull_mac_phy_cap_svc_ready_ext() assumes only one band
supported in each phy, hence it skips 5 GHz band if 2 GHz band support
is detected. This does not work for device which gets only one phy but
has both bands supported, such as QCC2072.
Change to check each band individually to fix this issue.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-6-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f852de000 ]
For single pdev device like WCN7850/QCC2072, preferred_hw_mode is
initialized to WMI_HOST_HW_MODE_SINGLE. Later when firmware sends
supported modes to host, each mode is compared with the initial one
and if the priority of the new mode is higher, update the parameter
and store mode capability.
For WCN7850, this does not result in issue, as one of the supported
mode indeed has a higher priority. However the only available mode of
QCC2072 at this stage is WMI_HOST_HW_MODE_SINGLE, which fails the
comparison, hence mode capability is not stored. Subsequently driver
initialization fails.
Fix it by accepting a mode with the same priority.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-4-fc8ce1e43969@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bc8c48de6 ]
STA fails to connect to a 6 GHz AP with the following errors:
ath11k_pci 0000:01:00.0: failed to handle chan list with power type 1
wlp1s0: deauthenticating from c8:a3:e8:dd:41:e3 by local choice (Reason: 3=DEAUTH_LEAVING)
ath11k_reg_handle_chan_list() treats the update as redundant and
returns -EINVAL. That causes the connection attempt to fail.
Avoid unnecessary validation during association. Apply the regulatory
redundant check only when the power type is IEEE80211_REG_UNSET_AP,
which only occurs during core initialization.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Signed-off-by: Qian Zhang <qian.zhang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108034607.812885-1-qian.zhang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4015b19727 ]
Z16 Gen1 has the wakeup-from-suspend issues from [1] but was never added
to the appropriate quirk list. I've tested this patch on top of 6.18.2,
it fixes the issue for me on 21D4
Mark Pearson provided the other product IDs covering the second Z16 Gen1
and both Z13 Gen1 identifiers. They share the same firmware, and folks
in the bugzilla report do indeed see the problem on Z13.
[1] - https://bugzilla.kernel.org/show_bug.cgi?id=219196
Signed-off-by: Ross Vandegrift <ross@kallisti.us>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/wj7o2kmb7g54stdjvxp2hjqrnutnq3jbf4s2uh4ctvmlxdq7tf@nbkj2ebakhrd
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fd36ffede ]
For certain chip models, EHT protocol is disabled, and driver must follow
the capabilities. Otherwise, chips become unusable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5d712e5b8 ]
Some Rockchip PCIe Root Ports report bogus size of 1GiB for the BAR
memories and they cause below resource allocation issue during probe.
pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 PCIe Root Port
pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x3fffffff]
pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x3fffffff]
pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
...
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: assigned
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: can't assign; no space
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: failed to assign
pci 0000:00:00.0: ROM [mem 0xf0200000-0xf020ffff pref]: assigned
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: releasing
pci 0000:00:00.0: ROM [mem 0xf0200000-0xf020ffff pref]: releasing
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: assigned
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: can't assign; no space
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: failed to assign
Since there is no use of the Root Port BAR memories, disable both of them.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: reworded the description and comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1766570461-138256-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fd8f953f2 ]
Some APs disconnect clients by sending a Disassociation frame
rather than a Deauthentication frame. Since these frames use
different reason codes in WoWLAN mode, this commit adds support
for handling Disassociation to prevent missed disconnection events.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2a44d0d2 ]
For beamforming procedure, hardware reserve memory page for CSI response.
The unit of register is (value - 1), so add one accordingly as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260110022019.2254969-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2a0cac105 ]
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66676e6ca ]
The function usb_tx_block() submits cardp->tx_urb without ensuring that
any previous transmission on this URB has completed. If a second call
occurs while the URB is still active (e.g. during rapid firmware loading),
usb_submit_urb() detects the active state and triggers a warning:
'URB submitted while active'.
Fix this by enforcing serialization: call usb_kill_urb() before
submitting the new request. This ensures the URB is idle and safe to reuse.
Reported-by: syzbot+67969ab6a2551c27f71b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=67969ab6a2551c27f71b
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Link: https://patch.msgid.link/20251221155806.23925-1-swilczek.lx@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0890f9dbd ]
The actions_parse() function uses strtok() to tokenize the trigger
string, but does not check if the returned token is NULL before
passing it to strcmp(). If the trigger parameter is an empty string
or contains only delimiter characters, strtok() returns NULL, causing
strcmp() to dereference a NULL pointer and crash the program.
This issue can be triggered by malformed user input or edge cases in
trigger string parsing. Add a NULL check immediately after the strtok()
call to validate that a token was successfully extracted before using
it. If no token is found, the function now returns -1 to indicate a
parsing error.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260106133655.249887-13-wander@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb57be32f4 ]
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251231090647.56407-11-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 915a5f60ad ]
T99W760 is designed based on Qualcomm SDX35 chip. It use similar
architecture with SDX72/SDX75 chip. So we need to assign initial
link id for this device to make sure network available.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260105022646.10630-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df180b1a4c ]
The SMMU CMDQ lock is highly contentious when there are multiple CPUs
issuing commands and the queue is nearly full.
The lock has the following states:
- 0: Unlocked
- >0: Shared lock held with count
- INT_MIN+N: Exclusive lock held, where N is the # of shared waiters
- INT_MIN: Exclusive lock held, no shared waiters
When multiple CPUs are polling for space in the queue, they attempt to
grab the exclusive lock to update the cons pointer from the hardware. If
they fail to get the lock, they will spin until either the cons pointer
is updated by another CPU.
The current code allows the possibility of shared lock starvation
if there is a constant stream of CPUs trying to grab the exclusive lock.
This leads to severe latency issues and soft lockups.
Consider the following scenario where CPU1's attempt to acquire the
shared lock is starved by CPU2 and CPU0 contending for the exclusive
lock.
CPU0 (exclusive) | CPU1 (shared) | CPU2 (exclusive) | `cmdq->lock`
--------------------------------------------------------------------------
trylock() //takes | | | 0
| shared_lock() | | INT_MIN
| fetch_inc() | | INT_MIN
| no return | | INT_MIN + 1
| spins // VAL >= 0 | | INT_MIN + 1
unlock() | spins... | | INT_MIN + 1
set_release(0) | spins... | | 0 see[NOTE]
(done) | (sees 0) | trylock() // takes | 0
| *exits loop* | cmpxchg(0, INT_MIN) | 0
| | *cuts in* | INT_MIN
| cmpxchg(0, 1) | | INT_MIN
| fails // != 0 | | INT_MIN
| spins // VAL >= 0 | | INT_MIN
| *starved* | | INT_MIN
[NOTE] The current code resets the exclusive lock to 0 regardless of the
state of the lock. This causes two problems:
1. It opens the possibility of back-to-back exclusive locks and the
downstream effect of starving shared lock.
2. The count of shared lock waiters are lost.
To mitigate this, we release the exclusive lock by only clearing the sign
bit while retaining the shared lock waiter count as a way to avoid
starving the shared lock waiters.
Also deleted cmpxchg loop while trying to acquire the shared lock as it
is not needed. The waiters can see the positive lock count and proceed
immediately after the exclusive lock is released.
Exclusive lock is not starved in that submitters will try exclusive lock
first when new spaces become available.
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Alexander Grest <Alexander.Grest@microsoft.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b13ef361d4 ]
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
This follows the precedent set by commit 54416fd767 ("netfilter:
conntrack: helper: Replace -EEXIST by -EBUSY") which fixed the same
issue in nf_conntrack_helper_register().
Affected modules:
* dm_cache dm_clone dm_integrity dm_mirror dm_multipath dm_pcache
* dm_vdo dm-ps-round-robin dm_historical_service_time dm_io_affinity
* dm_queue_length dm_service_time dm_snapshot
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c96752d99 ]
When inactive, 6 GHz power type has been assigned to the default one,
but missed to mark the local control variable, dflt, true. Then, this
might let some 6 GHz power info of disconnected APs keep being taken
into account under certain cases.
So, mark default when inactive.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251229030926.27004-12-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcac0f23d4 ]
Internally wiphy writes to individual channels in this structure,
so we must not share one static definition of channel list between
multiple device instances, because that causes hard to debug
breakage.
For example, with two rtw88 driven devices in the system, channel
information may get incoherent, preventing channel use.
Copied from commit 0ae36391c8 ("wifi: rtw89: Fix inadverent sharing
of struct ieee80211_supported_band data").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/e94ad653-2b6d-4284-a33c-8c694f88955b@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba12401cc ]
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a86 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*").
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1aa7fdef-2d5b-4a31-a4e9-fac8257ed30d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b40c1c757 ]
For BE chips, needs to transmit QoS null data periodically to ensure
the connection with AP in GC+STA mode. However, in environments
with interference, the Qos null data might fail to transmit
successfully. Therefore, when receive the beacon from AP will
reset the QoS null data failure counter to avoid unnecessary
disconnection.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-13-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e5f83fba4 ]
When initializing mac port, needs to set TBTT AGG number to trigger TBTT
related interrupts. Otherwise, after sending join info H2C command with
disconnection mode, firmware will clear TBTT AGG number. Without the
setting from mac port initialization after that, this port will not be
able to transmit beacons.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-12-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4de946bdb ]
After recovering from L1, explicitly enable error IMR to ensure next
L1 SER (system error recovery) can work normally.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251223030651.480633-6-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41be33d3ef ]
I have some rtl8922ae devices with no permanent mac stored in efuse.
It could be properly saved and/or configured from user tools like
NetworkManager, but it would be desirable to be able to initialize it
somehow to get the device working by default.
So, in the same way as with other devices, if the mac address read from
efuse contains zeros, a random mac address is assigned to at least allow
operation, and the user is warned about this in case any action needs to
be considered.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251126091905.217951-1-jtornosm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77653c327e ]
Add support for Mercusys MU6H AC650 High Gain Wireless Dual Band USB
Adapter V1.30. It is based on RTL8811CU, usb device ID is 2c4e:0105.
Signed-off-by: Hsiu-Ming Chang <cges30901@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251205003245.5762-1-cges30901@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f68fdcdc9 ]
The function rtw_set_dtim_period() accepted an 'int' dtim_period parameter,
while mac80211 provides dtim_period as 'u8' in struct ieee80211_bss_conf.
In IBSS (ad-hoc) mode mac80211 may set dtim_period to 0.
The driver unconditionally wrote (dtim_period - 1) to
REG_DTIM_COUNTER_ROOT, which resulted in 0xFF when dtim_period was 0. This
caused delays in broadcast/multicast traffic processing and issues with
ad-hoc operation.
Convert the function parameter to u8 to match ieee80211_bss_conf and avoid
the underflow by writing 0 when dtim_period is 0.
Link: https://github.com/lwfinger/rtw88/issues/406
Signed-off-by: Roman Peshkichev <roman.peshkichev@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251125180937.22977-1-roman.peshkichev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd2fdfd0a ]
During system suspend, if the PCIe link is not up, then there is no need
to broadcast PME_Turn_Off message and wait for L2/L3 transition. So skip
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251218-pci-dwc-suspend-rework-v2-1-5a7778c6094a@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9218dc26fd ]
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reported-by: syzbot+9131ddfd7870623b719f@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=9131ddfd7870623b719f
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0cfcf265 ]
The jfsIOWait() thread calls try_to_freeze() but lacks set_freezable(),
causing it to remain non-freezable by default. This prevents proper
freezing during system suspend.
Add set_freezable() to make the thread freezable as intended.
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac656d7d7c ]
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 084d5d4441 ]
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1ff574bb ]
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84faa91585 ]
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96e041647b ]
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16c589567a ]
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Mateusz Redzynia <mateuszx.redzynia@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1dccb485c ]
pwrseq_power_on() calls pwrseq_unit_disable() when the
post_enable callback fails. However, this call is outside the
scoped_guard(mutex, &pwrseq->state_lock) block that ends.
pwrseq_unit_disable() has lockdep_assert_held(&pwrseq->state_lock),
which will fail when called from this error path.
Add the scoped_guard block to cover the post_enable callback and its
error handling to ensure the lock is held when pwrseq_unit_disable() is
called.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260130182651.1576579-1-n7l8m4@u.northwestern.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8232e6079a ]
Handle failures in the resume path by unwinding previously enabled
resources.
If enabling regulators or syncing the regcache fails, disable regulators
and unprepare the clock to avoid leaking resources and leaving the device
in a partially resumed state.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-6-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af4fe07a9d ]
Add support for the solar-charging Logitech K980 keyboard, over
Bluetooth. Bolt traffic doesn't get routed through logitech-dj, so
this code isn't triggered when Bolt is used.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4923bbff0b ]
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In nct7363_present_pwm_fanin, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_9717645269E4C07D3D131F52201E12E5E10A@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a3d6f79c ]
Add hardware monitoring support for the Fintek F81968 Super I/O chip.
It is fully compatible with F81866.
Several products share compatibility with the F81866. To better distinguish
between them, ensure that the Product ID is displayed when the device is
probed.
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Link: https://lore.kernel.org/r/20251223051040.10227-1-peter_hong@fintek.com.tw
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2954ce672b ]
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In emc2305_of_parse_pwm_child, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_738BA80BBF28F3440301EEE6F9E470165105@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0fa7879c9 ]
Add support for customer ID 0x1621 found on ASRock Z590 Taichi
boards using the Nuvoton NCT6686D embedded controller.
This allows the driver to instantiate without requiring the
force=1 module parameter.
Tested on two separate ASRock Z590 Taichi boards, both with
EC firmware version 1.0 build 01/25/21.
Signed-off-by: Anj Duvnjak <avian@extremenerds.net>
Link: https://lore.kernel.org/r/20251222220942.10762-1-avian@extremenerds.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 246167b17c ]
Boards Pro WS WRX90E-SAGE SE has got a nct6775 chip, but by default there's
no use of it because of resource conflict with WMI method.
Add the board to the WMI monitoring list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Marcus <shoes2ga@gmail.com>
Link: https://lore.kernel.org/r/20251231155316.2048-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46c3e87a79 ]
The Dell OptiPlex 7080 supports the legacy SMM interface for reading
sensors and performing fan control. Whitelist this machine so that
this driver loads automatically.
Closes: https://github.com/Wer-Wolf/i8kutils/issues/16
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20260104000654.6406-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
