The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/usb/gadget/udc/rzv2m_usb3drd.c:120:34: error: ‘rzv2m_usb3drd_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311173624.263189-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/usb/renesas_usbhs/common.c:535:34: error: ‘usbhs_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311173624.263189-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/usb/host/max3421-hcd.c:1943:34: error: ‘max3421_of_match_table’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311173624.263189-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/usb/host/xhci-rcar.c:269:34: error: ‘usb_xhci_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230311173624.263189-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230310164129.21937-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144728.1545786-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
usb glue layer driver to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230309204452.969574-6-conor@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_get_irq() only return non-zero irq number on success, or
negative error number on failure.
There is no need to check the return value of platform_get_irq()
to determine the return value of dwc3_gadget_get_irq(), removing
them to solve this problem.
Signed-off-by: Yalong Zou <yalongz@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309150815.1884260-1-yalongz@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230316083954.4223-1-yuzhe@nfschina.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The December 2022 edition of the Intel Instruction Set Extensions manual
defined that the split lock disable bit in the IA32_CORE_CAPABILITIES MSR
is (and retrospectively always has been) architectural.
Remove all the model specific checks except for Ice Lake variants which are
still needed because these CPU models do not enumerate presence of the
IA32_CORE_CAPABILITIES MSR.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/lkml/20220701131958.687066-1-fenghua.yu@intel.com/t/#mada243bee0915532a6adef6a9e32d244d1a9aef4
The AutoIBRS bit gets set only on the BSP as part of determining which
mitigation to enable on AMD. Setting on the APs relies on the
circumstance that the APs get booted through the trampoline and EFER
- the MSR which contains that bit - gets replicated on every AP from the
BSP.
However, this can change in the future and considering the security
implications of this bit not being set on every CPU, make sure it is set
by verifying EFER later in the boot process and on every AP.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20230224185257.o3mcmloei5zqu7wa@treble
Allow reading and writing gmux ports from userspace.
For example:
echo 4 > /sys/kernel/debug/apple_gmux/selected_port
cat /sys/kernel/debug/apple_gmux/selected_port_data | xxd -p
Will show the gmux version information (00000005 in this case)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-5-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In some newer dual gpu MacBooks, the T2 Coprocessor functions as the
gmux, and the Intel side can interract with this new gmux type through
MMIO. Add support for these gmux controllers to the apple-gmux driver.
We start using the GMSP(0) acpi method on these gmux's when clearing
interrupts, as this prevents a flood of status=0 interrupts that can't
be cleared. It's unknown if this helps or hinders older gmux types, so
it isn't enabled for those.
Interestingly, the ACPI table only allocates 8 bytes for GMUX, but we
actually need 16, and as such we request 16 with request_mem_region.
Reading and writing from ports:
16 bytes from 0xfe0b0200 are used. 0x0 to 0x4 are where data
to read appears, and where data to write goes. Writing to 0xe
sets the gmux port being accessed, and writing to 0xf sends commands.
These commands are 0x40 & data_length for write, and data_length for
read, where data_length is 1, 2 or 4. Once byte base+0xf is 0, the
command is done.
Issues:
As with other retina models, we can't switch DDC lines so
switching at runtime doesn't work if the inactive gpu driver
already disabled eDP due to it not being connected when that
driver loaded.
Additionally, turning on the dgpu back on on the MacBookPro16,1 does
not work.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-4-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add apple_gmux_config struct containing operations and data specific to
each mux type.
This is in preparation for adding a third, MMIO based, gmux type.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-3-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On T2 Macs with MMIO gmux, when GMUX_PORT_SWITCH_DISPLAY is read, it can
have values of 2, 3, 4, and 5. Odd values correspond to the discrete gpu,
and even values correspond to the integrated gpu. The current logic is
that only 2 corresponds to IGD, but this doesn't work for T2 Macs.
Instead, check the first bit to determine the connected gpu.
As T2 Macs with gmux only can switch the internal display, it is
untested if this change (or a similar change) would be applicable
to GMUX_PORT_SWITCH_DDC and GMUX_PORT_SWITCH_EXTERNAL.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-2-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add tabs/spaces in conditional statements in to fix the
indentation.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230314121152.GA38979@sumitra.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's cleaner to set "j = -1;" before the if block and remove the else
statement.
Signed-off-by: Archana <craechal@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230311121253.10225-2-craechal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is cleaner to use "goto free_result;" as is being followed
in rest of the implementation of writeimage function, and
remove unnecessary kfree statements.
Signed-off-by: Archana <craechal@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230311121253.10225-1-craechal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_get_raw_rssi_info() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function linked_info_dump() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function isAllSpaceOrTab() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ParseQualifiedString() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function MapCharToHexDigit() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function rtl92e_is_legal_rf_path that will always return 1. Reason
is that the eRFPath is always 0 for RF90_PATH_A or 1 for RF90_PATH_B but
never 2 or 3. In most usage cases this is easy to see but for the
following functions that use rtl92e_is_legal_rf_path it is more
difficult:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b801f1f9ff3c58aedab4e3e07b2ec0a816fdf5d9.1678740713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rfHSSIPara2 and
priv->phy_reg_def[RF90_PATH_D].rfHSSIPara2.
rfHSSIPara2 is used in rtl92e_set_bb_reg which is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/186f3e59e736de6fd2111e835cdb4b633ca41bbc.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rfLSSIReadBack and
priv->phy_reg_def[RF90_PATH_D].rfLSSIReadBack.
rfLSSIReadBack is used in:
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/622777b394a896b6db08eb7faeb455e5cbeae93f.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>