Commit graph

1,185,212 commits

Author SHA1 Message Date
Jacob Keller
a23c82e006 wifi: ipw2x00: convert ipw_fw_error->elem to flexible array[]
The ipw_fw_error structure contains a payload[] flexible array as well as
two pointers to this array area, ->elem, and ->log. The total size of the
allocated structure is computed without use of the <linux/overflow.h>
macros.

There's no reason to keep both a payload[] and an extra pointer to both the
elem and log members. Convert the elem pointer member into the flexible
array member, removing payload.

Fix the allocation of the ipw_fw_error structure to use size_add(),
struct_size(), and array_size() to compute the allocation. This ensures
that any overflow saturates at SIZE_MAX rather than overflowing and
potentially allowing an undersized allocation.

Before the structure change, the layout of ipw_fw_error was:

struct ipw_fw_error {
        long unsigned int          jiffies;              /*     0     8 */
        u32                        status;               /*     8     4 */
        u32                        config;               /*    12     4 */
        u32                        elem_len;             /*    16     4 */
        u32                        log_len;              /*    20     4 */
        struct ipw_error_elem *    elem;                 /*    24     8 */
        struct ipw_event *         log;                  /*    32     8 */
        u8                         payload[];            /*    40     0 */

        /* size: 40, cachelines: 1, members: 8 */
        /* last cacheline: 40 bytes */
};

After this change, the layout is now:

struct ipw_fw_error {
        long unsigned int          jiffies;              /*     0     8 */
        u32                        status;               /*     8     4 */
        u32                        config;               /*    12     4 */
        u32                        elem_len;             /*    16     4 */
        u32                        log_len;              /*    20     4 */
        struct ipw_event *         log;                  /*    24     8 */
        struct ipw_error_elem      elem[];               /*    32     0 */

        /* size: 32, cachelines: 1, members: 7 */
        /* last cacheline: 32 bytes */
};

This saves a total of 8 bytes for every ipw_fw_error allocation, and
removes the risk of a potential overflow on the allocation.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230307230148.3735684-1-jacob.e.keller@intel.com
2023-03-13 15:44:15 +02:00
Martin Kaiser
0606b34402 wifi: rtl8xxxu: use module_usb_driver
We can use the module_usb_driver macro instead of open-coding the driver's
init and exit functions. This is simpler and saves some lines of code.
Other realtek wireless drivers use module_usb_driver as well.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230307195718.168021-1-martin@kaiser.cx
2023-03-13 15:44:01 +02:00
Ping-Ke Shih
8a66293e73 wifi: rtw89: release RX standby timer of beamformee CSI to save power
Originally, we keep RX standby timer to handle beamformee CSI, but this
spends power and causes system not entering power save mode. To improve
power consumption, release the timer if throughput becomes low.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230307141848.26403-1-pkshih@realtek.com
2023-03-13 15:43:39 +02:00
Martin Kaiser
df259fc12b wifi: rtl8xxxu: mark Edimax EW-7811Un V2 as tested
The Edimax V2 (vid 0x7392, pid 0xb811) works well with the rtl8xxxu driver
since rtl8188eu support has been added. Remove the untested flag for this
device.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230305175932.719103-1-martin@kaiser.cx
2023-03-13 15:43:20 +02:00
Hans de Goede
659fda7f35 wifi: brcmfmac: Use ISO3166 country code and rev 0 as fallback on 4356
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are
all special world-wide compatibility ccode-s. Most of these world-wide
ccode-s allow passive scan mode only for 2.4GHz channels 12-14,
only enabling them when an AP is seen on them.

Since linux-firmware has moved to the new cyfmac4356-pci.bin +
cyfmac4356-pci.clm_blob firmware files this no longer works and
4356 devices using e.g. an X2 ccode fail to connect to an AP on
channel 13.

Add the 4356 chip-id to the list of chips for which to use the ISO3166
country code + rev 0 as fallback in brcmf_translate_country_code() to
fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230303222331.285663-1-hdegoede@redhat.com
2023-03-13 15:43:00 +02:00
Kalle Valo
298e50ad8e wifi: move raycs, wl3501 and rndis_wlan to legacy directory
To clean up drivers/net/wireless move the old drivers drivers left in the
directory to a new "legacy" directory. I did consider adding
CONFIG_WLAN_VENDOR_LEGACY like other vendors have but then dropped the idea as
these are really old drivers and hopefully we get to remove them soon.

There should be no changes in compilation or in Kconfig options, merely moving files.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230227121732.8967-3-kvalo@kernel.org
2023-03-13 15:42:14 +02:00
Kalle Valo
f79cbc77ab wifi: move mac80211_hwsim and virt_wifi to virtual directory
To clean up drivers/net/wireless move the virtual drivers to a new virtual
directory. I did consider adding CONFIG_WLAN_VENDOR_VIRTUAL like other vendors
have but then dropped the idea as we are not real drivers.

There should be no changes in compilation or in Kconfig options, merely moving
files. The order in menuconfig is slightly changed, the virtual drivers are now
last in the list.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230227121732.8967-2-kvalo@kernel.org
2023-03-13 15:42:14 +02:00
Krzysztof Kozlowski
1dae3f1df7 i3c: dw: drop of_match_ptr for ID table
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF error:

  drivers/i3c/master/dw-i3c-master.c:1201:34: error: ‘dw_i3c_master_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132535.352246-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-13 14:41:24 +01:00
Andy Shevchenko
ce48f95586 i3c: Correct reference to the I²C device data type
I²C peripheral devices that are connected to the controller are
represented in the Linux kernel as objects of the struct i2c_client.
Fix this in the header file.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230302161206.38106-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-13 14:41:04 +01:00
Lorenzo Bianconi
5683e1488a wifi: mt76: connac: do not check WED status for non-mmio devices
WED is supported just for mmio devices, so do not check it for usb or
sdio devices. This patch fixes the crash reported below:

[   21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[   22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[   22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[   22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[   22.565885] wlp0s3u1i3: authenticated
[   22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3)
[   22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3)
[   22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms)
[   23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3)
[   23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3)
[   23.797450] wlp0s3u1i3: associated
[   24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   24.959640] BUG: unable to handle page fault for address: ffff88800c223200
[   24.959706] #PF: supervisor instruction fetch in kernel mode
[   24.959788] #PF: error_code(0x0011) - permissions violation
[   24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163
[   24.959957] Oops: 0011 [#1] PREEMPT SMP
[   24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18
[   24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
[   24.960191] RIP: 0010:0xffff88800c223200
[   24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[   24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[   24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[   24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[   24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[   24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[   24.960950] FS:  00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   24.961036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[   24.961190] Call Trace:
[   24.961219]  <TASK>
[   24.961245]  ? mt76_connac_mcu_add_key+0x2cf/0x310
[   24.961313]  ? mt7921_set_key+0x150/0x200
[   24.961365]  ? drv_set_key+0xa9/0x1b0
[   24.961418]  ? ieee80211_key_enable_hw_accel+0xd9/0x240
[   24.961485]  ? ieee80211_key_replace+0x3f3/0x730
[   24.961541]  ? crypto_shash_setkey+0x89/0xd0
[   24.961597]  ? ieee80211_key_link+0x2d7/0x3a0
[   24.961664]  ? crypto_aead_setauthsize+0x31/0x50
[   24.961730]  ? sta_info_hash_lookup+0xa6/0xf0
[   24.961785]  ? ieee80211_add_key+0x1fc/0x250
[   24.961842]  ? rdev_add_key+0x41/0x140
[   24.961882]  ? nl80211_parse_key+0x6c/0x2f0
[   24.961940]  ? nl80211_new_key+0x24a/0x290
[   24.961984]  ? genl_rcv_msg+0x36c/0x3a0
[   24.962036]  ? rdev_mod_link_station+0xe0/0xe0
[   24.962102]  ? nl80211_set_key+0x410/0x410
[   24.962143]  ? nl80211_pre_doit+0x200/0x200
[   24.962187]  ? genl_bind+0xc0/0xc0
[   24.962217]  ? netlink_rcv_skb+0xaa/0xd0
[   24.962259]  ? genl_rcv+0x24/0x40
[   24.962300]  ? netlink_unicast+0x224/0x2f0
[   24.962345]  ? netlink_sendmsg+0x30b/0x3d0
[   24.962388]  ? ____sys_sendmsg+0x109/0x1b0
[   24.962388]  ? ____sys_sendmsg+0x109/0x1b0
[   24.962440]  ? __import_iovec+0x2e/0x110
[   24.962482]  ? ___sys_sendmsg+0xbe/0xe0
[   24.962525]  ? mod_objcg_state+0x25c/0x330
[   24.962576]  ? __dentry_kill+0x19e/0x1d0
[   24.962618]  ? call_rcu+0x18f/0x270
[   24.962660]  ? __dentry_kill+0x19e/0x1d0
[   24.962702]  ? __x64_sys_sendmsg+0x70/0x90
[   24.962744]  ? do_syscall_64+0x3d/0x80
[   24.962796]  ? exit_to_user_mode_prepare+0x1b/0x70
[   24.962852]  ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[   24.962913]  </TASK>
[   24.962939] Modules linked in:
[   24.962981] CR2: ffff88800c223200
[   24.963022] ---[ end trace 0000000000000000 ]---
[   24.963087] RIP: 0010:0xffff88800c223200
[   24.963323] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[   24.963376] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[   24.963458] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[   24.963538] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[   24.963622] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[   24.963705] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[   24.963788] FS:  00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[   24.963871] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.963941] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[   24.964018] note: wpa_supplicant[391] exited with irqs disabled

Fixes: d1369e515e ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/c42168429453474213fa8244bf4b069de4531f40.1678124335.git.lorenzo@kernel.org
2023-03-13 15:30:55 +02:00
Felix Fietkau
c2f73eacee wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
A number of users reported that this support was working fine before
it got removed. Add it back, but leave out the unsupported 80+80 mode.

Fixes: ac922bd60a ("wifi: mt76: mt7915: remove BW160 and BW80+80 support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230301163739.52314-1-nbd@nbd.name
2023-03-13 15:30:35 +02:00
Lorenzo Bianconi
41130c32f3 wifi: mt76: do not run mt76_unregister_device() on unregistered hw
Trying to probe a mt7921e pci card without firmware results in a
successful probe where ieee80211_register_hw hasn't been called. When
removing the driver, ieee802111_unregister_hw is called unconditionally
leading to a kernel NULL pointer dereference.
Fix the issue running mt76_unregister_device routine just for registered
hw.

Link: https://bugs.debian.org/1029116
Link: https://bugs.kali.org/view.php?id=8140
Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Fixes: 1c71e03afe ("mt76: mt7921: move mt7921_init_hw in a dedicated work")
Tested-by: Helmut Grohne <helmut@freexian.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/be3457d82f4e44bb71a22b2b5db27b644a37b1e1.1677107277.git.lorenzo@kernel.org
2023-03-13 15:29:44 +02:00
Mark Brown
c938bb0cf6 Linux 6.3-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
 s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
 7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
 iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
 uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
 gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
 kR1Kl7I=
 =Hz45
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQPI0MACgkQJNaLcl1U
 h9AErggAhLVhZdBQhrIuJwLJzcb4ijEcx79uPFJc38DOn9uHe8v1rHcOmYzZyGb6
 Hwv8fW91C+wbEE4ACHHWXvri22GLP8wEuDyBbP/70POF/qPLfLtFbIVlLlNpBawO
 eEPIluODlHrZ3qzJ2hW3zrHKlLkFC0AcgrTqYkxc7/FGcuV1wlmcQl/ucOb4UdaN
 zhBsVe2YAs9yrl2Rpo0xdFFyvZ4sUkJ5ANfjBcjBuL3w1+4BjDfdkUt2RYpHnvUa
 cS9sswdOX27d9ThzsvkDHjclWK39HG49Pc8rZOXym8SO1jusmX/+g0Qs+ObiM2vx
 g8LdjcL5lZtzPNdV7Nyf114znRlIFw==
 =/MEc
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-rc2' into spi-6.4 to fix clock related boot issues

Linux 6.3-rc2
2023-03-13 13:21:01 +00:00
Mark Brown
83c05c97a3 Linux 6.3-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
 s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
 7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
 iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
 uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
 gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
 kR1Kl7I=
 =Hz45
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQPIzsACgkQJNaLcl1U
 h9C+0gf9F+j4cZyWXXcFA64g8lPjC+bFU/1Qllvdeu7UyUL5S2tYVDyUfCLzyXxS
 5TB+/xfa+gxCQ9g7duniFdbhBTNcYP1Y2BN3k9T4Omx63c4UKDA4/yp9zsegG5Yp
 NAzDeiDjl6CzOO2HFxdN/PP/KSKTdawVQCrj/872XePTz/gD38FaPAYQMDCLzW9i
 9aFWZWsEtvvGNiXh5UW32AyIvdwn7/Ia2nO8Qo3MsbsZoYi3GMXPZmg7NZxpt4Q9
 ZQRTZVRBoOMVUIes6BnOWjjZwgccM/PN5Fjul0AQY2cgFDtBiOd6VMwI9frmsYdM
 ejgv/Tr75lMu7j8RgqR17n2ipGdDyg==
 =6Wp6
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-rc2' into regmap-6.4 to fix clock related boot issues

Linux 6.3-rc2
2023-03-13 13:20:52 +00:00
Mark Brown
b9d0bb8f1c Linux 6.3-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
 s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
 7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
 iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
 uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
 gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
 kR1Kl7I=
 =Hz45
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQPIzMACgkQJNaLcl1U
 h9B/6AgAgbVtu/4K/uNKjk3F2Ry+cyiLHOzwLwUYHW78G7xj3svhiVqs65FZZI3G
 5Eu1DsHGrN58vXqFhMu9sNp1tafgdzBbicP/JKFziBPvBBhZwBo/BZjUxWKB5Y30
 6kM2vQjnpySZKGFQuWZ0E8sZDCtIjK2XcHUJn42AFLlHOKMmU0o70+AykgZTNNlb
 6i0wecV8UKClR2p84E3UyVBWLzv7lYh6DlkpKw8eY90DnPACx5Mv03HZw25t/nsm
 uL5Cr2MM2mm4YbBgn9yUj0B8rNTIXyDYU94bmNASrr1Oc7RKzCd7CqxzlTpu/C2l
 vXd9lOpUGotfy9MBMB5sNf/zI1iDLQ==
 =H0b8
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-rc2' into regulator-6.4 to fix clock related boot issues

Linux 6.3-rc2
2023-03-13 13:20:45 +00:00
Mark Brown
32ef0f1a7f Linux 6.3-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
 s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
 7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
 iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
 uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
 gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
 kR1Kl7I=
 =Hz45
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQPIywACgkQJNaLcl1U
 h9AggQf/UKB67aB/rbG/TO6Cz8DbQMiGU1+WBQ6nSs5/hwbPLixpmAAOp55Lhfk1
 MEDQPz0yhkLH4/GqJLFiCQB/x7JTO0ALuMFZiJZZPwrntHU3EO2C02TMmAlS41Yj
 w7W2/hWB+vgOFAihmqf6kwl8cgB4MuCGzzGFykHV1z4yXqpN3nfX/woIA6RStdzM
 J85FwKldrM4/H6QlE2nc2zTXRLPadHHeYVkp40BZCSe2geVHqdUhyrW2z3Gc/16H
 wJpge8oT/S1z0+p/5w/86DTDsebyzEfuZSE5QKd5Ujwhj6sF4a2OMU/Yw9fZtS/8
 Hiy0qgFUWH7othivilrmRAWuplwGFg==
 =FoUZ
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-rc2' into asoc-6.4 to fix clock related boot issues

Linux 6.3-rc2
2023-03-13 13:20:33 +00:00
Mark Brown
dda5c809d4 Linux 6.3-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
 s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
 7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
 iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
 uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
 gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
 kR1Kl7I=
 =Hz45
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQPIugACgkQJNaLcl1U
 h9CJawf/aeizhS2ziYWpHXPfJ7fnk4KQxGPmd9cIfL8SeBeK0xNWSBw1/eTykuV5
 UTPCi+FsAkkFXCwMS8ZajwmU0GRbo9zJzbx8IAvTdlseVutXS6ffI24Qr5e6OyNy
 JxwTJ87Y5pOAMdtPBm55EI9Vt/k1vSETaebRoJ1ujXqX+sYH6qK9SjwFd3RgQKsy
 hlUYXRFuNe3mAoIPL0HGnHLHoLQq2csXAJl/gggJTF0AxPeEkPnFU7m2svQk+kdV
 G/m+AOEtpYm7SWfn2OKOkn8QMbKvPS5SxlLEjIhAe8akupyQo/BRxKABFCIeqDXo
 xXv987AN07DPZ6Lclg6RjJy+xKeklw==
 =kXlx
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-rc2' into asoc-6.3 to fix clock related failures

Linux 6.3-rc2
2023-03-13 13:18:59 +00:00
Rob Herring
4a1b9f4eb1 soc: qcom: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310144724.1545153-1-robh@kernel.org
2023-03-13 05:43:07 -07:00
Uwe Kleine-König
c4dc24da52 clk: qcom: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312161512.2715500-23-u.kleine-koenig@pengutronix.de
2023-03-13 05:41:06 -07:00
Krzysztof Kozlowski
903caf42ea soc: qcom: gsbi: mark OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF making certain data
unused:

  drivers/soc/qcom/qcom_gsbi.c:117:34: error: ‘tcsr_dt_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310214413.275054-1-krzysztof.kozlowski@linaro.org
2023-03-13 05:37:27 -07:00
Dionna Glaze
72f7754dcf virt/coco/sev-guest: Add throttling awareness
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.

Therefore, the host is permitted and encouraged to throttle such guest
requests.

Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.

Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.

This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.

To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.

So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.

For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.

  [ bp:
    - Rewrite commit message and do a simplified version.
    - The stable tags are supposed to denote that a cleanup should go
      upfront before backporting this so that any future fixes to this
      can preserve the sanity of the backporter(s). ]

Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff7 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab82374 (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274b ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c8 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc6 ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
2023-03-13 13:29:27 +01:00
Aditya Kumar Singh
e238e62ba8 wifi: ath11k: add debug prints in regulatory WMI event processing
Add some more debug prints in processing regulatory WMI event in order to
increase more debuggability.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230110121024.14051-4-quic_adisi@quicinc.com
2023-03-13 13:57:48 +02:00
Aditya Kumar Singh
91fa00fa69 wifi: ath11k: add support to parse new WMI event for 6 GHz
In order to support different power levels of 6 GHz AP and client,
new WMI event for regulatory - WMI_REG_CHAN_LIST_CC_EXT_EVENTID is
added in firmware. This event provides new parameters required for
6 GHz regulatory rules.

Add support for parsing 2.4 GHz, 5 GHz and 6 GHz reg rules and other
parameters from WMI_REG_CHAN_LIST_CC_EXT_EVENTID.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Lavanya Suresh <quic_lavaks@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230110121024.14051-3-quic_adisi@quicinc.com
2023-03-13 13:57:47 +02:00
Aditya Kumar Singh
25e289e1f5 wifi: ath11k: use proper regulatory reference for bands
Currently, during regulatory event, 2 GHz/5 GHz is referred
to as 2G/5G including variable names. However, there is no
such entity as 2G or 5G.

Re-name such occurences to its proper name. No functional changes.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230110121024.14051-2-quic_adisi@quicinc.com
2023-03-13 13:57:47 +02:00
Kees Cook
f2f6e1661d IB/rdmavt: Fix target union member for rvt_post_one_wr()
The "cplen" result used by the memcpy() into struct rvt_swqe "wqe" may
be sized to 80 for struct rvt_ud_wr (which is member "ud_wr", not "wr"
which is only 40 bytes in size). Change the destination union member so
the compiler can use the correct bounds check.

struct rvt_swqe {
        union {
                struct ib_send_wr wr;   /* don't use wr.sg_list */
                struct rvt_ud_wr ud_wr;
		...
	};
	...
};

Silences false positive memcpy() run-time warning:

  memcpy: detected field-spanning write (size 80) of single field "&wqe->wr" at drivers/infiniband/sw/rdmavt/qp.c:2043 (size 40)

Reported-by: Zhang Yi <yizhan@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216561
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230218185701.never.779-kees@kernel.org
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-03-13 13:56:31 +02:00
Borislav Petkov (AMD)
fa4ae42cc6 virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.

Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
2023-03-13 12:55:34 +01:00
Daniil Dulov
271bfcfb83 RDMA/siw: Fix potential page_array out of range access
When seg is equal to MAX_ARRAY, the loop should break, otherwise
it will result in out of range access.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: b9be6f18cf ("rdma/siw: transmit path")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-03-13 13:54:49 +02:00
Kang Chen
c874ad879c IB/hifi1: add a null check of kzalloc_node in hfi1_ipoib_txreq_init
kzalloc_node may fails, check it and do the cleanup.

Fixes: b1151b74ff ("IB/hfi1: Fix alloc failure with larger txqueuelen")
Signed-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227100212.910820-1-void0red@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-03-13 13:51:28 +02:00
Borislav Petkov (AMD)
d25bae7dc7 virt/coco/sev-guest: Do some code style cleanups
Remove unnecessary linebreaks, make the code more compact.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de
2023-03-13 12:47:55 +01:00
Stanislaw Gruszka
2cde14b187 accel: Build sub-directories based on config options
When accel drivers are disabled do not process into
sub-directories and create built-in archives:

  AR      drivers/accel/habanalabs/built-in.a
  AR      drivers/accel/ivpu/built-in.a

Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
(cherry picked from commit dd61bbd0d1)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2023-03-13 12:44:53 +01:00
Stanislaw Gruszka
dd61bbd0d1 accel: Build sub-directories based on config options
When accel drivers are disabled do not process into
sub-directories and create built-in archives:

  AR      drivers/accel/habanalabs/built-in.a
  AR      drivers/accel/ivpu/built-in.a

Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
2023-03-13 12:40:41 +01:00
Luis Chamberlain
3e27877ac5
devpts: simplify two-level sysctl registration for pty_kern_table
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().

Simplify this registration.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-13 12:36:34 +01:00
Borislav Petkov (AMD)
0fdb6cc7c8 virt/coco/sev-guest: Carve out the request issuing logic into a helper
This makes the code flow a lot easier to follow.

No functional changes.

  [ Tom: touchups. ]

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
2023-03-13 12:35:02 +01:00
Fabien Parent
56edffdc29 thermal/drivers/mediatek: Add support for MT8365 SoC
MT8365 is similar to the other SoCs supported by the driver. It has only
one bank and 3 actual sensors that can be multiplexed. There is another
one sensor that does not have usable data.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-03-13 12:20:34 +01:00
Markus Schneider-Pargmann
33140e668b thermal/drivers/mediatek: Control buffer enablement tweaks
Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-03-13 12:20:34 +01:00
Fabien Parent
dfd7956f00 dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC
Add the binding documentation for the thermal support on MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-1-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-03-13 12:20:34 +01:00
Herbert Xu
f4796398f2 xfrm: Remove inner/outer modes from output path
The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6.  As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information.  These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.

Just like the input-side, removing this from the output code
makes it possible to use transport-mode SAs underneath an
inter-family tunnel mode SA.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-03-13 11:51:13 +01:00
Herbert Xu
5f24f41e8e xfrm: Remove inner/outer modes from input path
The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6.  As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information.  These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.

Removing them from the input path actually allows certain valid
combinations that are currently disallowed.  In particular, when
a transport mode SA sits beneath a tunnel mode SA that changes
address families, at present the transport mode SA cannot have
AF_UNSPEC as its selector because it will be erroneously be treated
as inter-family itself even though it simply sits beneath one.

This is a serious problem because you can't set the selector to
non-AF_UNSPEC either as that will cause the selector match to
fail as we always match selectors to the inner-most traffic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-03-13 11:51:13 +01:00
Rob Herring
b7405e3f62 PM / devfreq: exynos: Use of_property_present() for testing DT property presence
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-03-13 19:38:59 +09:00
Krzysztof Kozlowski
f9d0393a88 PM / devfreq: exyos-bus: drop of_match_ptr for ID table
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).

  drivers/devfreq/exynos-bus.c:504:34: error: ‘exynos_bus_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-03-13 19:36:47 +09:00
Paul E. McKenney
737dbd6667 PM / devfreq: Remove "select SRCU"
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it.  Therefore, remove the "select SRCU"
Kconfig statements.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-03-13 19:36:15 +09:00
Borislav Petkov (AMD)
c5a338274b virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
Call the function directly instead.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-5-bp@alien8.de
2023-03-13 11:33:41 +01:00
Luis Chamberlain
dced733d7f quota: simplify two-level sysctl registration for fs_dqstats_table
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().

Simplify this registration.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230310231206.3952808-4-mcgrof@kernel.org>
2023-03-13 11:32:01 +01:00
Borislav Petkov (AMD)
970ab82374 virt/coco/sev-guest: Simplify extended guest request handling
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.

While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.

  [ Tom: check override_err instead of err. ]

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
2023-03-13 11:27:10 +01:00
Krzysztof Kozlowski
10fe4a1399 pinctrl: qcom: sm8550-lpass-lpi: allow GPIO function
All LPASS pins have basic GPIO function and most of the code is ready
for that.  Add missing glue pieces to allow LPASS pins to work as GPIO,
which is going to be used on MTP8550 and QRD8550 boards.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:24:58 +01:00
Krzysztof Kozlowski
fae1466da9 pinctrl: qcom: lpass-lpi: allow glitch-free output GPIO
When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux().  This replicates
the commit d21f4b7ffc ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:24:58 +01:00
Krzysztof Kozlowski
926cf596ce pinctrl: qcom: lpass-lpi: use consistent name for "group" variable
The set_mux callback in SoC TLMM driver (pinctrl-msm.c) uses "group",
not "group_num" for the number of the pin group.  Other places of
lpass-lpi also use "group", so let's be consistent for code readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:24:58 +01:00
Krzysztof Kozlowski
163bfb0cb1 pinctrl: qcom: lpass-lpi: set output value before enabling output
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE).  Similar approach
is in main SoC TLMM pin controller.

Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:24:57 +01:00
Konrad Dybcio
29f6e7e379 pinctrl: qcom: msm8998: Add MPM pin mappings
Add MPM <-> TLMM pin mappings to allow for waking up the AP from sleep
through MPM-connected pins.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230308213651.647098-1-konrad.dybcio@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:23:06 +01:00
Mark Brown
5361ebe94a pinctrl: at91: Remove pioc_index from struct at91_gpio_chip
The pioc_idx member of struct at91_gpio_chip is write only, just remove it.

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230216-gpio-at91-immutable-v2-2-326ef362dbc7@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-13 11:21:54 +01:00