To help gpiolib not fiddle around with the internals of the irqchip
flag the chip as immutable, adding the calls into the gpiolib core
required to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230216-gpio-at91-immutable-v2-1-326ef362dbc7@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
The declaration of s32_pinctrl_suspend/s32_pinctrl_resume is hidden
in an #ifdef, causing a compilation failure when CONFIG_PM_SLEEP is
disabled:
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:38: error: 's32_pinctrl_suspend' undeclared here (not in a function); did you mean 's32_pinctrl_probe'?
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:9: note: in expansion of macro 'SET_LATE_SYSTEM_SLEEP_PM_OPS'
754 | SET_LATE_SYSTEM_SLEEP_PM_OPS(s32_pinctrl_suspend,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the bogus #ifdef and __maybe_unused annation on the global
functions, and instead use the proper LATE_SYSTEM_SLEEP_PM_OPS()
macro to pick set the function pointer.
As the function definition is still in the #ifdef block, this leads
to the correct code in all configurations.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230310140250.359147-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/pinctrl/pinctrl-sx150x.c:833:34: error: ‘sx150x_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132702.352832-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert to use i_blocksize() for readability.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230310030821.66090-2-frank.li@vivo.com>
When tunneling aggregated USB3 (20 Gb/s) the bandwidth values that are
programmed to the ADP_USB3_CS_2 go higher than 4096 and that does not
fit anymore to the 12-bit field. Fix this by scaling the value using
the scale field accordingly.
Fixes: 3b1d8d577c ("thunderbolt: Implement USB3 bandwidth negotiation routines")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to apply quirks based on certain adapter types move call to
tb_check_quirks() happen after the adapters are initialized. This should
not affect the existing quirks.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to USB4 retimer specification, the process of firmware update
sequence requires issuing a SET_INBOUND_SBTX port operation that later
shall be followed by UNSET_INBOUND_SBTX port operation. This last step
is not currently issued by the driver but it is necessary to make sure
the retimers are put back to passthrough mode even during enumeration.
If this step is missing the link may not come up properly after
soft-reboot for example.
For this reason issue UNSET_INBOUND_SBTX after SET_INBOUND_SBTX for
enumeration and also when the NVM upgrade is run.
Reported-by: Christian Schaubschläger <christian.schaubschlaeger@gmx.at>
Link: https://lore.kernel.org/linux-usb/b556f5ed-5ee8-9990-9910-afd60db93310@gmx.at/
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Memory for the usb4->margining needs to be relased for the upstream port
of the router as well, even though the debugfs directory gets released
with the router device removal. Fix this.
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38 ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173f ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173f ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38 ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 5060060557)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It seems that commit bc3c5e0809 ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bc3c5e0809 ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 3cba09a6ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 64cf40a125 ("drm/i915/psr: Program default IO buffer Wake and Fast Wake")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit cb42e8ede5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previous documentation suggested that PL1 power limit is always
enabled. However we now find this not to be the case on some
platforms (such as ATSM). Therefore enable PL1 power limit during hwmon
initialization.
Bspec: 51864
v2: Add Bspec reference (Gwan-gyeong)
v3: Add Fixes tag
Fixes: 99f55efb79 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203155309.1042297-1-ashutosh.dixit@intel.com
(cherry picked from commit 0349c41b05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The hardware settings for color format and pitch are state of the
primary plane. Store the values in the primary plane's state structure
struct cirrus_primary_plane_state. Adapt all callers.
All fields in struct cirrus_device are now considered immutable after
initialization. Plane updates consider the difference between the old
and the new plane state before updating format or pitch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-17-tzimmermann@suse.de
Test a display mode against the available amount of video memory in
struct drm_mode_config_funcs.mode_valid, which cirrus implements in
cirrus_mode_config_mode_valid(). This helper tests display modes against
device-wide limits. Remove the now-obsolete per-CRTC test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-14-tzimmermann@suse.de
Inline cirrus_fb_blit_rect into its only caller. While at it, update
the code to use IOSYS_MAP_INIT_OFFSET(), which is the ideomatic way
of initializing struct iosys_map with an offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-11-tzimmermann@suse.de
Enable damage clipping on the primary plane and iterate over small
areas of reported framebuffer damage. Avoid the overhead of permanent
full-screen updates that cirrus currently implements.
This problem is indicated by the warning
drm_plane_enable_fb_damage_clips() not called
in the kernel's log. Without damage clipping, drivers do full updates
of the screen area. This is costly as many screen updates, such as
cursor movement or command-line input, only change a small portion
of the output. Damage clipping allows renderers to inform drivers about
the changed areas.
With the damage information known, cirrus now iterates over a list of
change areas and only flushes those to the hardware's scanout buffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-10-tzimmermann@suse.de
Replace simple-KMS helpers with DRM's regular helpers for atomic
modesetting. Avoids the mid-layer and the additional wrappers around
GEM's shadow-plane helpers.
Most of the simple-KMS code is just wrappers around regular atomic
helpers. The conversion is therefore equivalent to pulling the
simple-KMS helpers into cirrus and removing all the intermediate
code and data structures between the driver and the atomic helpers.
As the simple-KMS helpers lump primary plan, CRTC and encoder into a
single data structure, the conversion to regular helpers allows to
split modesetting from plane updates and handle each individually.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-9-tzimmermann@suse.de
Move the primary plane's format and modifier arrays within the
source file and adapt naming slightly. No functional changes.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-8-tzimmermann@suse.de
Integrate the connector with the rest of the pipeline setup code.
Move some helpers within the file and adapt naming slightly. No
functional changes.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-7-tzimmermann@suse.de
Split cirrus_mode_set() into smaller functions that set the display
mode, color format and scnaline pitch individually. Better reflects
the design of the DRM modesetting pipeline.
Done in preparation of converting cirrus to regular atomic helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-6-tzimmermann@suse.de
Call drm_dev_enter() and drm_dev_exit() immediately after entering
cirrus' DRM helper functions. Remove these calls from other functions.
Each enter/exit block in the DRM helpers covers the full hardware
update. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-5-tzimmermann@suse.de
The calculation for the scanout-buffer blit offset is independent
from the color format. In the one case where the current code uses
fb->pitches[0] instead of cirrus->pitch, their values are identical.
Hence merge all into a single line.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-2-tzimmermann@suse.de
Use the gpios instead of gpio suffix that is mandated by the binding.
This dtbs_check warning is fixed now:
touchscreen@5c: Unevaluated properties are not allowed ('reset-gpio' was unexpected)
The reset signal worked correctly as both the "gpio" and "gpios" suffixes
are actually allowed by the gpiolib.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx6dl-yapp4-draco board is actually based on the i.MX6Solo SoC.
Fix the comment to match reality.
Fixes: 24ef3b6e22 ("dt-bindings: arm: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prior to commit 960ac36264 ("s390/pci: allow zPCI zbus without
a function zero") enabling and scanning a PCI function had to
potentially be postponed until the function with devfn zero on that bus
was plugged. While the commit removed the waiting itself extra code to
scan all functions on the PCI bus once function zero appeared was
missed. Remove that code and the outdated comments about waiting for
function zero.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230306151014.60913-5-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The pci_bus_add_devices() call in zpci_bus_create_pci_bus() is without
function since at this point no device could have been added to the
freshly created PCI bus.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230306151014.60913-4-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As the name suggests zpci_bus_scan_device() is used to scan a specific
device and thus pci_bus_add_device() for that device is sufficient.
Furthermore move this call inside the rescan/remove locking.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230306151014.60913-3-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
gen_lpswe() contains a BUILD_BUG_ON() statement which depends on a function
parameter. If the compiler decides to generate a not inlined function this
will lead to a build error, even if all call sites pass a valid parameter.
To avoid this always inline gen_lpswe().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Setting and ->psw.addr in childregs of kernel thread is a rudiment of
the old kernel_thread()/kernel_execve() implementation. Mainline hadn't
been using them since 2012.
And clarify the assignments to frame->sf.gprs - the array stores
grp6..gpr15 values to be set by __switch_to(), so frame->sf.gprs[5]
actually affects grp11, etc.
Better spell that as frame->sf.gprs[11 - 6]...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/ZAU6BYFisE8evmYf@ZenIV
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20230303052155.21072-1-yuzhe@nfschina.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is no point in changing branch prediction state of a cpu shortly
before it enters stop state. Therefore remove __bpon().
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
TIF_ISOLATE_BP is unused since it was introduced with commit 6b73044b2b
("s390: run user space and KVM guests with modified branch prediction").
Given that there is no use case remove it again.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When leaving interpretive execution because of a program check BPENTER
should be called like it is done on interrupt exit as well.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.
This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.
Cc: <stable@vger.kernel.org>
Fixes: 9641b8cc73 ("s390/ipl: read IPL report at early boot")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>