The hwmon code wants to know when it is safe to access the A2h data
stored in a separate address. We indicate that this is present when
we have SFF-8472 compliance and the lack of an address-change
sequence.,
The same conditions are also true if we want to access other controls
and status in the A2h address. So let's make a flag to indicate whether
we can access it, instead of repeating the conditions throughout the
code.
For now, only convert the hwmon code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CI results for the 'fast request' patch set (enables error return
codes for fire-and-forget H2G messages) hit an issue with the KMD
sending context submission requests on an invalid context. That was
caused by a fault injection probe failing the context creation of a
kernel context. However, there was no return code checking on any of
the kernel context registration paths. So the driver kept going and
tried to use the kernel context for the record defaults process.
This would not cause any actual problems. The invalid requests would
be rejected by GuC and ultimately the start up sequence would
correctly wedge due to the context creation failure. But fixing the
issue correctly rather ignoring it means we won't get CI complaining
when the fast request patch lands and enables the extra error checking.
So fix it by checking for errors and aborting as appropriate when
creating kernel contexts. While at it, clean up some other submission
init related failure cleanup paths. Also, rename guc_init_lrc_mapping
to guc_init_submission as the former name hasn't been valid in a long
time.
v2: Add another wrapper to keep the flow balanced (Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217223308.3449737-3-John.C.Harrison@Intel.com
The stats worker thread management was mis-matched between
enable/disable call sites. Fix those up. Also, abstract the
cancel/enable code into a helper function rather than replicating in
multiple places.
v2: Rename the helpers and wrap the enable as well as the cancel
(review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217223308.3449737-2-John.C.Harrison@Intel.com
Gal Pressman says:
====================
Couple of minor improvements to build_skb variants
First patch replaces open-coded occurrences of
skb_propagate_pfmemalloc() in build_skb() and build_skb_around().
The secnod patch adds a likely() to the skb allocation in build_skb().
====================
Link: https://lore.kernel.org/r/20230308131720.2103611-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to napi_build_skb(), it is likely the skb allocation in
build_skb() succeeded. frag_size != 0 is also likely, as stated in
__build_skb_around().
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use skb_propagate_pfmemalloc() in build_skb()/build_skb_around() instead
of open-coding it.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tap driver already supports passing in nonblocking state based
on O_NONBLOCK, add support for checking IOCB_NOWAIT as well. With that
done, we can flag it with FMODE_NOWAIT as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/8f859870-e6e2-09ca-9c0f-a2aa7c984fb2@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tun already checks for both O_NONBLOCK and IOCB_NOWAIT in its read
and write iter handlers, so it's fully ready for FMODE_NOWAIT. But
for some reason it doesn't set it. Rectify that oversight.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/3f7dc1f0-79ca-d85c-4d16-8c12c5bd492d@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuan Zhuo says:
====================
add checking sq is full inside xdp xmit
If the queue of xdp xmit is not an independent queue, then when the xdp
xmit used all the desc, the xmit from the __dev_queue_xmit() may encounter
the following error.
net ens4: Unexpected TXQ (0) queue failure: -28
This patch adds a check whether sq is full in XDP Xmit.
====================
Link: https://lore.kernel.org/r/20230308024935.91686-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the queue of xdp xmit is not an independent queue, then when the xdp
xmit used all the desc, the xmit from the __dev_queue_xmit() may encounter
the following error.
net ens4: Unexpected TXQ (0) queue failure: -28
This patch adds a check whether sq is full in xdp xmit.
Fixes: 56434a01b1 ("virtio_net: add XDP_TX support")
Reported-by: Yichun Zhang <yichun@openresty.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the logic of checking whether sq is full. The subsequent patch
will reuse this func.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of this is to facilitate the subsequent addition of new
functions without introducing a separate declaration.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur says:
====================
net: lan966x: Add support for IS1 VCAP
Provide the Ingress Stage 1 (IS1) VCAP (Versatile Content-Aware
Processor) support for the Lan966x platform.
The IS1 VCAP has 3 lookups and they are accessible with a TC chain id:
- chain 1000000: IS1 Lookup 0
- chain 1100000: IS1 Lookup 1
- chain 1200000: IS1 Lookup 2
The IS1 is capable of different actions like rewrite VLAN tags, change
priority of the frames, police the traffic, etc. These features will be
added at a later point.
The IS1 currently implements the action that allows setting the value
of a PAG (Policy Association Group) key field in the frame metadata and
this can be used for matching in an IS2 VCAP rule. In this way a rule in
IS0 VCAP can be linked to rules in the IS2 VCAP. The linking is exposed
by using the TC "goto chain" action with an offset from the IS2 chain ids.
For example "goto chain 8000001" will use a PAG value of 1 to chain to a
rule in IS2 lookup 0.
====================
Link: https://lore.kernel.org/r/20230307220929.834219-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IS1 VCAP has it's own list of supported ethernet protocol types which is
different than the IS2 VCAP. Therefore separate the list of known
protocol types based on the VCAP type.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow rules to be chained between IS1 VCAP and IS2 VCAP. Chaining
between IS1 lookups or between IS2 lookups are not supported by the
hardware.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add IS1 VCAP port keyset configuration for lan966x and also update debug
fs support to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide IS1 (ingress stage 1) VCAP model for lan966x.
This provides classification actions for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Marchevsky says:
====================
Local kptrs are kptrs allocated via bpf_obj_new with a type specified in program
BTF. A BPF program which creates a local kptr has exclusive control of the
lifetime of the kptr, and, prior to terminating, must:
* free the kptr via bpf_obj_drop
* If the kptr is a {list,rbtree} node, add the node to a {list, rbtree},
thereby passing control of the lifetime to the collection
This series adds a third option:
* stash the kptr in a map value using bpf_kptr_xchg
As indicated by the use of "stash" to describe this behavior, the intended use
of this feature is temporary storage of local kptrs. For example, a sched_ext
([0]) scheduler may want to create an rbtree node for each new cgroup on cgroup
init, but to add that node to the rbtree as part of a separate program which
runs on enqueue. Stashing the node in a map_value allows its lifetime to outlive
the execution of the cgroup_init program.
Behavior:
There is no semantic difference between adding a kptr to a graph collection and
"stashing" it in a map. In both cases exclusive ownership of the kptr's lifetime
is passed to some containing data structure, which is responsible for
bpf_obj_drop'ing it when the container goes away.
Since graph collections also expect exclusive ownership of the nodes they
contain, graph nodes cannot be both stashed in a map_value and contained by
their corresponding collection.
Implementation:
Two observations simplify the verifier changes for this feature. First, kptrs
("referenced kptrs" until a recent renaming) require registration of a
dtor function as part of their acquire/release semantics, so that a referenced
kptr which is placed in a map_value is properly released when the map goes away.
We want this exact behavior for local kptrs, but with bpf_obj_drop as the dtor
instead of a per-btf_id dtor.
The second observation is that, in terms of identification, "referenced kptr"
and "local kptr" already don't interfere with one another. Consider the
following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
struct map_value *mapval;
struct node_data *res;
int key = 0;
res = bpf_obj_new(typeof(*res));
if (!res) { /* err handling */ }
mapval = bpf_map_lookup_elem(&some_nodes, &key);
if (!mapval) { /* err handling */ }
res = bpf_kptr_xchg(&mapval->node, res);
if (res)
bpf_obj_drop(res);
The __kptr tag identifies map_value's node as a referenced kptr, while the
PTR_TO_BTF_ID which bpf_obj_new returns - a type in some non-vmlinux,
non-module BTF - identifies res as a local kptr. Type tag on the pointer
indicates referenced kptr, while the type of the pointee indicates local kptr.
So using existing facilities we can tell the verifier about a "referenced kptr"
pointer to a "local kptr" pointee.
When kptr_xchg'ing a kptr into a map_value, the verifier can recognize local
kptr types and treat them like referenced kptrs with a properly-typed
bpf_obj_drop as a dtor.
Other implementation notes:
* We don't need to do anything special to enforce "graph nodes cannot be
both stashed in a map_value and contained by their corresponding collection"
* bpf_kptr_xchg both returns and takes as input a (possibly-null) owning
reference. It does not accept non-owning references as input by virtue
of requiring a ref_obj_id. By definition, if a program has an owning
ref to a node, the node isn't in a collection, so it's safe to pass
ownership via bpf_kptr_xchg.
Summary of patches:
* Patch 1 modifies BTF plumbing to support using bpf_obj_drop as a dtor
* Patch 2 adds verifier plumbing to support MEM_ALLOC-flagged param for
bpf_kptr_xchg
* Patch 3 adds selftests exercising the new behavior
Changelog:
v1 -> v2: https://lore.kernel.org/bpf/20230309180111.1618459-1-davemarchevsky@fb.com/
Patch #s used below refer to the patch's position in v1 unless otherwise
specified.
Patches 1-3 were applied and are not included in v2.
Rebase onto latest bpf-next: "libbpf: Revert poisoning of strlcpy"
Patch 4: "bpf: Support __kptr to local kptrs"
* Remove !btf_is_kernel(btf) check, WARN_ON_ONCE instead (Alexei)
Patch 6: "selftests/bpf: Add local kptr stashing test"
* Add test which stashes 2 nodes and later unstashes one of them using a
separate BPF program (Alexei)
* Fix incorrect runner subtest name for original test (was
"rbtree_add_nodes")
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new selftest, local_kptr_stash, which uses bpf_kptr_xchg to stash
a bpf_obj_new-allocated object in a map. Test the following scenarios:
* Stash two rb_nodes in an arraymap, don't unstash them, rely on map
free to destruct them
* Stash two rb_nodes in an arraymap, unstash the second one in a
separate program, rely on map free to destruct first
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous patch added necessary plumbing for verifier and runtime to
know what to do with non-kernel PTR_TO_BTF_IDs in map values, but didn't
provide any way to get such local kptrs into a map value. This patch
modifies verifier handling of bpf_kptr_xchg to allow MEM_ALLOC kptr
types.
check_reg_type is modified accept MEM_ALLOC-flagged input to
bpf_kptr_xchg despite such types not being in btf_ptr_types. This could
have been done with a MAYBE_MEM_ALLOC equivalent to MAYBE_NULL, but
bpf_kptr_xchg is the only helper that I can forsee using
MAYBE_MEM_ALLOC, so keep it special-cased for now.
The verifier tags bpf_kptr_xchg retval MEM_ALLOC if and only if the BTF
associated with the retval is not kernel BTF.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a PTR_TO_BTF_ID type comes from program BTF - not vmlinux or module
BTF - it must have been allocated by bpf_obj_new and therefore must be
free'd with bpf_obj_drop. Such a PTR_TO_BTF_ID is considered a "local
kptr" and is tagged with MEM_ALLOC type tag by bpf_obj_new.
This patch adds support for treating __kptr-tagged pointers to "local
kptrs" as having an implicit bpf_obj_drop destructor for referenced kptr
acquire / release semantics. Consider the following example:
struct node_data {
long key;
long data;
struct bpf_rb_node node;
};
struct map_value {
struct node_data __kptr *node;
};
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__type(key, int);
__type(value, struct map_value);
__uint(max_entries, 1);
} some_nodes SEC(".maps");
If struct node_data had a matching definition in kernel BTF, the verifier would
expect a destructor for the type to be registered. Since struct node_data does
not match any type in kernel BTF, the verifier knows that there is no kfunc
that provides a PTR_TO_BTF_ID to this type, and that such a PTR_TO_BTF_ID can
only come from bpf_obj_new. So instead of searching for a registered dtor,
a bpf_obj_drop dtor can be assumed.
This allows the runtime to properly destruct such kptrs in
bpf_obj_free_fields, which enables maps to clean up map_vals w/ such
kptrs when going away.
Implementation notes:
* "kernel_btf" variable is renamed to "kptr_btf" in btf_parse_kptr.
Before this patch, the variable would only ever point to vmlinux or
module BTFs, but now it can point to some program BTF for local kptr
type. It's later used to populate the (btf, btf_id) pair in kptr btf
field.
* It's necessary to btf_get the program BTF when populating btf_field
for local kptr. btf_record_free later does a btf_put.
* Behavior for non-local referenced kptrs is not modified, as
bpf_find_btf_id helper only searches vmlinux and module BTFs for
matching BTF type. If such a type is found, btf_field_kptr's btf will
pass btf_is_kernel check, and the associated release function is
some one-argument dtor. If btf_is_kernel check fails, associated
release function is two-arg bpf_obj_drop_impl. Before this patch
only btf_field_kptr's w/ kernel or module BTFs were created.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
NVMEM layouts are no longer registered early, and thus may not yet be
available when Ethernet drivers (or any other consumer) probe, leading
to possible probe deferrals errors. Forward the error code if this
happens. All other errors being discarded, the driver will eventually
use a random MAC address if no other source was considered valid (no
functional change on this regard).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20230307192927.512757-1-miquel.raynal@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct pn533_out_arg used as a temporary context for out_urb is not
initialized properly. Its uninitialized 'phy' field can be dereferenced in
error cases inside pn533_out_complete() callback function. It causes the
following failure:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441
Call Trace:
<IRQ>
__usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671
usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754
dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700
expire_timers+0x234/0x330 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xaf6 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x9/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107
Initialize the field with the pn533_usb_phy currently used.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9dab880d67 ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()")
Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove 'integrity' from the list of LSMs in Kconfig, as it is no longer
necessary. Since the recent change (set order to LSM_ORDER_LAST), the
'integrity' LSM is always enabled (if selected in the kernel
configuration).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With the recent introduction of LSM_ORDER_LAST, the 'integrity' LSM is
always initialized (if selected in the kernel configuration) and the
iint_cache is always created (the kernel panics on error). Thus, the
additional check of iint_cache in integrity_inode_get() is no longer
necessary. If the 'integrity' LSM is not selected in the kernel
configuration, integrity_inode_get() just returns NULL.
This reverts commit 92063f3ca7.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.
Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.
Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.
Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.
Fixes: 79f7865d84 ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add brief text about existence of helper functions, with details to go in
separate psABI text.
Note that text about runtime functions (kfuncs) is part of a separate patch,
not this one.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Link: https://lore.kernel.org/r/20230308205303.1308-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix bug of the extra newline characters in debugfs logs. When a
line is added to debugfs with a newline character at the end,
an extra line appears in the debugfs log.
This is due to a discrepancy between how the lines are printed and how they
are added to the logs. Remove this discrepancy by checking if a newline
character is present before adding a newline character. This should closely
match the printk behavior.
Add kunit_log_newline_test to provide test coverage for this issue. (Also,
move kunit_log_test above suite definition to remove the unnecessary
declaration prior to the suite definition)
As an example, say we add these two lines to the log:
kunit_log(..., "KTAP version 1\n");
kunit_log(..., "1..1");
The debugfs log before this fix:
KTAP version 1
1..1
The debugfs log after this fix:
KTAP version 1
1..1
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.
Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of a log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix bug in debugfs logs that causes individual parameterized results to not
appear because the log is reinitialized (cleared) when each parameter is
run.
Ensure these results appear in the debugfs logs, increase log size to
allow for the size of parameterized results. As a result, append lines to
the log directly rather than using an intermediate variable that can cause
stack size warnings due to the increased log size.
Here is the debugfs log of ext4_inode_test which uses parameterized tests
before the fix:
KTAP version 1
# Subtest: ext4_inode_test
1..1
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
As you can see, this log does not include any of the individual
parametrized results.
After (in combination with the next two fixes to remove extra empty line
and ensure KTAP valid format):
KTAP version 1
1..1
KTAP version 1
# Subtest: ext4_inode_test
1..1
KTAP version 1
# Subtest: inode_test_xtimestamp_decoding
ok 1 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits
... (the rest of the individual parameterized tests)
ok 16 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16
ok 1 inode_test_xtimestamp_decoding
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The following build error can be seen:
progs/test_deny_namespace.c:22:19: error: call to undeclared function 'BIT_LL'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
__u64 cap_mask = BIT_LL(CAP_SYS_ADMIN);
The struct kernel_cap_struct no longer exists in the kernel as well.
Adjust bpf prog to fix both issues.
Fixes: f122a08b19 ("capability: just use a 'u64' instead of a 'u32[2]' array")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 11e456cae9 ("selftests/bpf: Fix compilation errors: Assign a value to a constant")
fixed the issue cleanly in bpf-next.
This is an alternative fix in bpf tree to avoid merge conflict between bpf and bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_record_find's 3rd parameter can be multiple enum btf_field_type's
masked together. The function is called with BPF_KPTR in two places in
verifier.c, so it works with masked values already.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This enum was added and used in commit aa3496accc ("bpf: Refactor kptr_off_tab
into btf_record"). Later refactoring in commit db55911782 ("bpf: Consolidate
spin_lock, timer management into btf_record") resulted in the enum
values no longer being used anywhere.
Let's remove them.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernel_type_name was introduced in commit 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
with type signature:
const char *kernel_type_name(u32 id)
At that time the function used global btf_vmlinux BTF for all id lookups. Later,
in commit 22dc4a0f5e ("bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier"),
the type signature was changed to:
static const char *kernel_type_name(const struct btf* btf, u32 id)
With the btf parameter used for lookups instead of global btf_vmlinux.
The helper will function as expected for type name lookup using non-kernel BTFs,
and will be used for such in further patches in the series. Let's rename it to
avoid incorrect assumptions that might arise when seeing the current name.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230309180111.1618459-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The file in include/uapi/linux/ have been cleaned in the previous patches,
so we can now remove these entries from the CONFIG_* ignore-list.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_* switches should not be exposed in uapi headers, thus let's get
rid of the USE_WCACHING macro here (which was also named way to generic)
and integrate the logic directly in the only function that needs it.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This has a "#ifdef CONFIG_*" that used to be exposed to userspace.
The names in here are so generic that I don't think it's a good idea
to expose them to userspace (or even the rest of the kernel). There are
multiple in-kernel users, so it's been moved to a kernel header file.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu>
Reviewed-by: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <1447119071-19392-10-git-send-email-palmer@dabbelt.com>
[thuth: Remove it also from tools/include/uapi/linux/hw_breakpoint.h]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This doesn't make any sense to expose to userspace, so it's been moved
to the one user. This was introduced by commit 95f19f658c ("epoll:
drop EPOLLWAKEUP if PM_SLEEP is disabled").
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu>
Reviewed-by: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <1447119071-19392-7-git-send-email-palmer@dabbelt.com>
[thuth: Rebased to fix contextual conflicts]
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This used to be behind an #ifdef COMPAT_COMPAT, so most of userspace
wouldn't have seen the definition before. Unfortunately this header
file became visible to userspace, so the definition has instead been
moved to net/atm/svc.c (the only user).
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Andrew Waterman <waterman@eecs.berkeley.edu>
Reviewed-by: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <1447119071-19392-4-git-send-email-palmer@dabbelt.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch tests how many kmallocs is needed to create and free
a batch of UDP sockets and each socket has a 64bytes bpf storage.
It also measures how fast the UDP sockets can be created.
The result is from my qemu setup.
Before bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 73.193us): creates 213.552k/s (213.552k/prod), 3.09 kmallocs/create
Iter 1 (-20.724us): creates 211.908k/s (211.908k/prod), 3.09 kmallocs/create
Iter 2 ( 9.280us): creates 212.574k/s (212.574k/prod), 3.12 kmallocs/create
Iter 3 ( 11.039us): creates 213.209k/s (213.209k/prod), 3.12 kmallocs/create
Iter 4 (-11.411us): creates 213.351k/s (213.351k/prod), 3.12 kmallocs/create
Iter 5 ( -7.915us): creates 214.754k/s (214.754k/prod), 3.12 kmallocs/create
Iter 6 ( 11.317us): creates 210.942k/s (210.942k/prod), 3.12 kmallocs/create
Summary: creates 212.789 ± 1.310k/s (212.789k/prod), 3.12 kmallocs/create
After bpf_mem_cache_alloc/free:
./bench -p 1 local-storage-create
Setting up benchmark 'local-storage-create'...
Benchmark 'local-storage-create' started.
Iter 0 ( 68.265us): creates 243.984k/s (243.984k/prod), 1.04 kmallocs/create
Iter 1 ( 30.357us): creates 238.424k/s (238.424k/prod), 1.04 kmallocs/create
Iter 2 (-18.712us): creates 232.963k/s (232.963k/prod), 1.04 kmallocs/create
Iter 3 (-15.885us): creates 238.879k/s (238.879k/prod), 1.04 kmallocs/create
Iter 4 ( 5.590us): creates 237.490k/s (237.490k/prod), 1.04 kmallocs/create
Iter 5 ( 8.577us): creates 237.521k/s (237.521k/prod), 1.04 kmallocs/create
Iter 6 ( -6.263us): creates 238.508k/s (238.508k/prod), 1.04 kmallocs/create
Summary: creates 237.298 ± 2.198k/s (237.298k/prod), 1.04 kmallocs/create
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-18-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tweats the socket_bind bpf prog to test the
local_storage->smap == NULL case in the bpf_local_storage_free()
code path. The idea is to create the local_storage with
the sk_storage_map's selem first. Then add the sk_storage_map2's selem
and then delete the earlier sk_storeage_map's selem.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-17-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch refactors local_storage freeing logic into
bpf_local_storage_free(). It is a preparation work for a later
patch that uses bpf_mem_cache_alloc/free. The other kfree(local_storage)
cases are also changed to bpf_local_storage_free(..., reuse_now = true).
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-12-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The existing bpf_local_storage_free_rcu is renamed to
bpf_local_storage_free_trace_rcu. A new bpf_local_storage_rcu
callback is added to do the kfree instead of using kfree_rcu.
It is a preparation work for a later patch using
bpf_mem_cache_alloc/free.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230308065936.1550103-11-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>