Commit graph

1,185,212 commits

Author SHA1 Message Date
Lad Prabhakar
5da750ddd9 arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
From R01UH0914EJ0120 Rev.1.20 HW manual the interrupt numbers for SSI
channels have been updated,

SPI 329 - SSIF0 is now marked as reserved
SPI 333 - SSIF1 is now marked as reserved
SPI 335 - SSIF2 is now marked as reserved
SPI 336 - SSIF2 is now marked as reserved
SPI 341 - SSIF3 is now marked as reserved

This patch drops the above IRQs from SoC DTSI.

Fixes: 92a341315a ("arm64: dts: renesas: r9a07g044: Add SSI support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230217185225.43310-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 17:00:43 +01:00
Geert Uytterhoeven
554edc3e92 arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).

Hence remove the "opp-microvolt" properties from the Operating
Performance Points table.  They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.

Fixes: 231d8908a6 ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
2023-03-10 17:00:42 +01:00
Geert Uytterhoeven
fb76b0fae3 arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).

Hence remove the "opp-microvolt" properties from the Operating
Performance Points table.  They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.

Fixes: dd7188eb4e ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
2023-03-10 17:00:42 +01:00
Lad Prabhakar
28924444f2 arm64: dts: renesas: r9a07g054: Add Cortex-A55 PMU node
Enable the performance monitor unit for the Cortex-A55 cores on the
RZ/V2L (r9a07g054) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230206001300.28937-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 17:00:42 +01:00
Andy Shevchenko
0c14f3aa38 gpio: sim: Deactivate device in reversed order
Run the steps to deactivate device in the reserved order to what
it has been done in gpio_sim_device_activate_unlocked().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:54:01 +01:00
Geert Uytterhoeven
93582bdfd0 arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
Increase build and test coverage by enabling RZ/V2M xHCI and USB3.1 DRD
controller support.

Note that the latter cannot be modular, as USB_XHCI_RCAR is builtin.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ff10d09c1a00f7024679a249e696e8c8a52d671e.1678286291.git.geert+renesas@glider.be
2023-03-10 16:41:43 +01:00
Geert Uytterhoeven
0a06ad2056 ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
Increase build and test coverage by enabling support for the A5PSW
Ethernet switch, pin, watchdog, USB Function, RTC, and DMA mux
controllers on the Renesas RZ/N1 SoC and the RZN1D-DB development board.

All drivers for the above are modular, except for the pin control
driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a163e8a9c4ae9cb10b05409f2fc139d09fe440b9.1678286291.git.geert+renesas@glider.be
2023-03-10 16:41:43 +01:00
Geert Uytterhoeven
64ddc2c9c0 ARM: shmobile: defconfig: Refresh for v6.3-rc1
Refresh the defconfig for Renesas ARM systems:
  - Disable CONFIG_SERIAL_8250_PCI1XXXX (No Microchip 8250 based serial
    ports),
  - Enable RZ/N1 USB Function controller support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b4bac37273be5287b0198abe0aafd16f08ed330d.1678286291.git.geert+renesas@glider.be
2023-03-10 16:41:43 +01:00
Wolfram Sang
d3b4fe74b9 arm64: defconfig: Disable R-Car H3 ES1.*
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds.  These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC.  Public users only have ES2 onwards.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 16:41:39 +01:00
Kuninori Morimoto
29dfd412ec arm64: defconfig: Enable DA7213 Codec
Enable the DA7213 Codec for ARD-AUDIO-DA7212 support on R-Car V4H White
Hawk.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87mt4pl9sz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 16:40:06 +01:00
Geert Uytterhoeven
b39d242dbf soc: renesas: rmobile-sysc: Use of_fwnode_handle() helper
Use the existing of_fwnode_handle() helper instead of open-coding the
same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/d49b9fb20d68709b12692558aca91997e6b06fb4.1678272276.git.geert+renesas@glider.be
2023-03-10 16:31:14 +01:00
Wolfram Sang
18ecaaea21 soc: renesas: Remove r8a77950 arch
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds.  These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC.  Public users only have ES2 onwards.

Remove the architecture which describes H3 ES1.*.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 16:31:11 +01:00
Wolfram Sang
fd9c55c0ac soc: renesas: rcar-sysc: Remove R-Car H3 ES1.* handling
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds.  These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC.  Public users only have ES2 onwards.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 16:31:07 +01:00
Jiapeng Chong
8a36cdc8ef gpio: loongson: Remove unnecessary .owner
Remove .owner field if calls are used which set it automatically.

./drivers/gpio/gpio-loongson-64bit.c:225:3-8: No need to set .owner here. The core will do it.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4450
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:27:28 +01:00
Linus Walleij
33886f9257 gpio: pcie-idio-24: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:37 +01:00
Linus Walleij
141d552756 gpio: pci-idio-16: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:36 +01:00
Linus Walleij
39575d114f gpio: omap: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

This driver require some special care: .irq_ack() was copied
from dummy_irq_chip where it was defined as noop. This only
makes sense if using handle_edge_irq() that will unconditionally
call .irq_ack() to avoid a crash, but this driver is not ever
using handle_edge_irq() so just avoid assigning .irq_ack().

A separate chip had to be created for the non-wakeup instance.

Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:35 +01:00
Linus Walleij
1e77c092d3 gpio: omap: Drop irq_base
The OMAP1 at one point was using static irqs but that time is gone,
OMAP1 uses sparse irqs like all other multiplatform targets so this
static allocation of descriptors should just go.

Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:34 +01:00
Linus Walleij
706cdfc517 gpio: max732x: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:33 +01:00
Linus Walleij
5bfff76d27 gpio: mlxbf2: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:32 +01:00
Linus Walleij
db45f0e105 gpio: msc313: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

This conversion follows the pattern of the gpio-ixp4xx
hierarchical GPIO interrupt driver.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:31 +01:00
Linus Walleij
9cd9e23ae3 gpio: idt3243x: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:30 +01:00
Linus Walleij
ab42f021bc gpio: hlwd: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:29 +01:00
Linus Walleij
39bdd6bdad gpio: hisi: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

The IRQ chip was unnamed which seems unwise, so we just
assign the name "HISI-GPIO".

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:27 +01:00
Linus Walleij
150a988035 gpio: cadence: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:24 +01:00
Linus Walleij
b11ce7e481 gpio: ath79: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:23 +01:00
Linus Walleij
c5dcf76805 gpio: aspeed-sgpio: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:20 +01:00
Linus Walleij
061df08f06 gpio: aspeed: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:19 +01:00
Joel Stanley
90d17632e7 gpio: aspeed: Always register the irqchip
The driver was implemented in a way that made the irqchip optional, if a
irq was not present in the device tree. However, all of the device trees
have always had an irq, so the optional-ness has never been used.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:18 +01:00
Linus Walleij
d4c0cf3408 gpio: adnp: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:16 +01:00
Linus Walleij
5cd79816d2 gpio: altera: Convert to immutable irq_chip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10 16:17:15 +01:00
Alex Henrie
c3388ddc74 HID: apple: Set the tilde quirk flag on the Geyser 4 and later
I recently tested several old MacBooks and as far as I can tell, all
MacBooks that have an ISO keyboard have the tilde key quirk:

Product    Model  Year  System      CPU    Shape  Labels     Country  Quirky
============================================================================
05ac:021b  A1181  2006  MacBook2,1  T5600  ISO    British    13       Yes
05ac:021b  A1181  2007  MacBook2,1  T7200  ISO    Québécois  13       Yes
05ac:0229  A1181  2007  MacBook4,1  T8300  ANSI   Usonian    33       No
05ac:022a  A1181  2007  MacBook4,1  T8100  ISO    English    13       Yes
05ac:022a  A1181  2007  MacBook5,2  P7350  ISO    Québécois  13       Yes
05ac:0237  A1278  2008  MacBook5,1  P7350  ISO    Dutch      13       Yes
05ac:0237  A1278  2009  MacBook5,5  P7550  ISO    British    13       Yes

The model number and year are from the laptop case. Since Apple printed
the same model and year on many different laptops, the system name (as
reported in the SMBIOS tables) and CPU form a more precise identifier.

Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:49:43 +01:00
Philippe Troin
50c6b976fb HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirks
Similar to many other devices using the Synopsys Designware Elantech
hardware, HP Spectre x360 13t-aw100 and 14t-ea100 report an empty
battery devices, supposedly for the active stylus.

Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore the battery reports
from these devices. Note that there are multiple versions of the panel
installed in the 14t-ea100.

Signed-off-by: Philippe Troin <phil@fifi.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:41:59 +01:00
Chuck Lever
e57d065277 NFS & NFSD: Update GSS dependencies
Geert reports that:
> On v6.2, "make ARCH=m68k defconfig" gives you
> CONFIG_RPCSEC_GSS_KRB5=m
> On v6.3, it became builtin, due to dropping the dependencies on
> the individual crypto modules.
>
> $ grep -E "CRYPTO_(MD5|DES|CBC|CTS|ECB|HMAC|SHA1|AES)" .config
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_TI=m
> CONFIG_CRYPTO_DES=m
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_HMAC=m
> CONFIG_CRYPTO_MD5=m
> CONFIG_CRYPTO_SHA1=m

This behavior is triggered by the "default y" in the definition of
RPCSEC_GSS.

The "default y" was added in 2010 by commit df486a2590 ("NFS: Fix
the selection of security flavours in Kconfig"). However,
svc_gss_principal was removed in 2012 by commit 03a4e1f6dd
("nfsd4: move principal name into svc_cred"), so the 2010 fix is
no longer necessary. We can safely change the NFS_V4 and NFSD_V4
dependencies back to RPCSEC_GSS_KRB5 to get the nicer v6.2
behavior back.

Selecting KRB5 symbolically represents the true requirement here:
that all spec-compliant NFSv4 implementations must have Kerberos
available to use.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: dfe9a12345 ("SUNRPC: Enable rpcsec_gss_krb5.ko to be built without CRYPTO_DES")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-03-10 09:38:47 -05:00
Peter Ujfalusi
75034eb5e4
ASoC: SOF: Intel: MTL: Don't access EM2
This reverts commit 2b5a30cafb ("ASoC: SOF: Intel: MTL: Enable
DMI L1").

It came to our attention that the access to the EM2 register is restricted
to the DSP side on MTL compared to prior platforms.

Writing to it from the host side has no effect (negative or positive), it
is better to remove the code to not cause confusion and wrong impression.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230310133454.15362-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-10 14:33:16 +00:00
fengqi
740b2f03f8 HID: add KEY_CAMERA_FOCUS event in HID
Our HID device need KEY_CAMERA_FOCUS event to control camera,
but this event is non-existent in current HID driver.
So we add this event in hid-input.c.

Signed-off-by: fengqi <fengqi@xiaomi.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:21:11 +01:00
David Yang
8c7b79bc04 HID: kye: Sort kye devices
Sort kye devices by their Produce IDs.

Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:05:24 +01:00
David Yang
4782c0e070 HID: kye: Generate tablet fixup descriptors on the fly
Remove duplicated descriptor structures and make it easier to discover
bugs.

Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:05:24 +01:00
David Yang
b8cd2d963d HID: kye: Rewrite tablet descriptor fixup routine
Genius digitizer tablets send incorrect (vendor-defined) report descriptors
by default. Descriptors for several models were added to override original
ones. Since they share the same structure and are handled by the same
Windows driver routine, extract the descriptor template and dynamic
parameters for easier new device adoption.

Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:05:24 +01:00
Daniel J. Ogorchock
d750d14803 HID: nintendo: fix rumble rate limiter
It's been discovered that BT controller disconnect events correlate to
erratic input report timestamp deltas.

In experimentation, it's been found that ensuring that multiple
timestamp deltas are consistent prior to transmitting a rumble packet
drastically reduces the occurence rate of BT disconnects.

Alter the joycon_enforce_subcmd_rate() function to use this new
approach.

Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:02:15 +01:00
Daniel J. Ogorchock
bcba9f32c1 HID: nintendo: prevent rumble queue overruns
Make sure that we never throw out the most recent rumble setting,
opting to overwrite the prior queue head instead. This prevents
instances where we could get rumble stuck on if there were an overrun at
the wrong time.

Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10 15:02:15 +01:00
Andy Shevchenko
21d19e601f
spi: mpc5xxx-psc: Remove goto to the unexisted label
The previous cleanup patch had lost one of its parts in a crack,
Finish the cleanup by removing the leftovers.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9e21720a49 ("spi: mpc5xxx-psc: use devm_clk_get_enabled() for core clock")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230310111544.57342-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-10 13:26:19 +00:00
Takashi Iwai
fe9ae05cfb fbdev: Fix incorrect page mapping clearance at fb_deferred_io_release()
The recent fix for the deferred I/O by the commit
  3efc61d952 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used.  It resulted in a frozen screen even if something
is redrawn there after the close.  The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.

This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.

As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.

Also, a useless BUG_ON() is dropped.

Fixes: 3efc61d952 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
2023-03-10 14:13:02 +01:00
Ard Biesheuvel
3c66bb1918 arm64: efi: Set NX compat flag in PE/COFF header
The PE/COFF header has a NX compat flag which informs the firmware that
the application does not rely on memory regions being mapped with both
executable and writable permissions at the same time.

This is typically used by the firmware to decide whether it can set the
NX attribute on all allocations it returns, but going forward, it may be
used to enforce a policy that only permits applications with the NX flag
set to be loaded to begin wiht in some configurations, e.g., when Secure
Boot is in effect.

Even though the arm64 version of the EFI stub may relocate the kernel
before executing it, it always did so after disabling the MMU, and so we
were always in line with what the NX compat flag conveys, we just never
bothered to set it.

So let's set the flag now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-10 14:11:40 +01:00
Ard Biesheuvel
3c60f67b4b efi/libstub: arm64: Remap relocated image with strict permissions
After relocating the executable image, use the EFI memory attributes
protocol to remap the code and data regions with the appropriate
permissions.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-10 14:11:39 +01:00
Ard Biesheuvel
c7d9e628b8 efi/libstub: zboot: Mark zboot EFI application as NX compatible
Now that the zboot loader will invoke the EFI memory attributes protocol
to remap the decompressed code and rodata as read-only/executable, we
can set the PE/COFF header flag that indicates to the firmware that the
application does not rely on writable memory being executable at the
same time.

Cc: <stable@vger.kernel.org> # v6.2+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-10 14:11:39 +01:00
Lukas Bulwahn
727de4c087 PCI: rcar: Avoid defines prefixed with CONFIG
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

In the R-car driver the bitmask to configure the SEND_ENABLE mode is named
CONFIG_SEND_ENABLE.

Rename this local definition to a more suitable name, containing the
register bitfield name defined in the R-Car Gen3 rev. 2.30 user
manual.

No functional change.

Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[lpieralisi@kernel.org: Changed define naming and commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 13:34:27 +01:00
Ville Syrjälä
2553bacaf9 drm/i915: Preserve crtc_state->inherited during state clearing
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.

Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.

Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-03-10 14:28:12 +02:00
Slark Xiao
14853a0676 bus: mhi: host: pci_generic: Revert "Add a secondary AT port to Telit FN990"
This reverts commit 2d5253a096.
There are 2 commits with commit message "Add a secondary AT port to Telit
FN990":

commit 2d5253a096 ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
commit 479aa3b0ec ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")

This turned out to be due to the patch getting applied through different
trees and git settled on a resolution while applying it second time. But
the second AT port of Foxconn devices don't work in PCIe mode. So the
second commit needs to be reverted.

Cc: stable@vger.kernel.org # 6.2
Fixes: 2d5253a096 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230310101715.69209-1-slark_xiao@163.com
[mani: massaged the commit message a bit, added fixes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-03-10 17:57:04 +05:30
Javier Martinez Canillas
3e853b9f89
drm/format-helper: Make conversion_buf_size() support sub-byte pixel fmts
There are DRM fourcc formats that have pixels smaller than a byte, but the
conversion_buf_size() function assumes that pixels are a multiple of bytes
and use the struct drm_format_info .cpp field to calculate the dst_pitch.

Instead, calculate it by using the bits per pixel (bpp) and divide it by 8
to account for formats that have sub-byte pixels.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307215039.346863-1-javierm@redhat.com
2023-03-10 12:40:56 +01:00