Commit graph

1,185,212 commits

Author SHA1 Message Date
Linus Torvalds
44889ba56c Networking fixes for 6.3-rc2, including fixes from netfilter, bpf
Current release - regressions:
 
   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()
 
   - sched:
     - act_connmark: handle errno on tcf_idr_check_alloc
     - flower: fix fl_change() error recovery path
 
   - ieee802154: prevent user from crashing the host
 
 Current release - new code bugs:
 
   - eth: bnxt_en: fix the double free during device removal
 
   - tools: ynl:
     - fix enum-as-flags in the generic CLI
     - fully inherit attrs in subsets
     - re-license uniformly under GPL-2.0 or BSD-3-clause
 
 Previous releases - regressions:
 
   - core: use indirect calls helpers for sk_exit_memory_pressure()
 
   - tls:
     - fix return value for async crypto
     - avoid hanging tasks on the tx_lock
 
   - eth: ice: copy last block omitted in ice_get_module_eeprom()
 
 Previous releases - always broken:
 
   - core: avoid double iput when sock_alloc_file fails
 
   - af_unix: fix struct pid leaks in OOB support
 
   - tls:
     - fix possible race condition
     - fix device-offloaded sendpage straddling records
 
   - bpf:
     - sockmap: fix an infinite loop error
     - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
     - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
 
   - netfilter: tproxy: fix deadlock due to missing BH disable
 
   - phylib: get rid of unnecessary locking
 
   - eth: bgmac: fix *initial* chip reset to support BCM5358
 
   - eth: nfp: fix csum for ipsec offload
 
   - eth: mtk_eth_soc: fix RX data corruption issue
 
 Misc:
 
   - usb: qmi_wwan: add telit 0x1080 composition
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmQJzQISHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOky5YP/04Dbsbeqpk0Q94axmjoaS0J/4rW49js
 RaA7v8ci7sL1omW8k5tILPXniAouN4YHNOCW1KbLBMR5O7lyn9qM1RteHOIpOmte
 TLzAw+6Wl7CyGiiqirv2GU96Wd/jZoZpPXFZz/gXP59GnkChSHzQcpexmz0nrmxI
 eCRSs+qm+re3wmDKTYm5C+g+420PNXu9JItPnTNf+nTkTBxpmOEMyry03I0taXKS
 wceQHB2q5E0sSWXDfkxG/pmUuYTj3AdRSQ+vo+FLevSs/LWeThs2I6pT5sn8XS76
 1S8Lh6FytfBhyalFmRtrpqIJYyGae5MwEXQ29ddfmF4OFFLedx3IH0+JFQxTE9So
 i4gaXmM5SUI7c5vhib097xUISoLxKqqXQVQQSQ1MPZRfXtVubbA2gCv+vh6fXVoj
 zQYatZOLM7KT9q4Pw8A+9bJPof/FV+ObC67pbGQbJJgBoy+oOixDuP+x5DYT384L
 /5XS+23OZiFe7bvQoE/0SQMeRk3lF2XkS5l9gSbdSnGQPiaOqKhDgkoCmdkn1jvg
 qtkBS6+tRRoOBNsjC4r4eFXBVOQ1+myyjZetBnEOaSp22FaTJFQh9qX3AMFIHbUy
 m0jDi9OJZSWHICd6KNWPm3JK43cMjiyZbGftYqOHhuY5HN30vQN6sl7DXIJ0rIcE
 myHMfizwqmGT
 =hSXM
 -----END PGP SIGNATURE-----

Merge tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()

   - sched:
      - act_connmark: handle errno on tcf_idr_check_alloc
      - flower: fix fl_change() error recovery path

   - ieee802154: prevent user from crashing the host

  Current release - new code bugs:

   - eth: bnxt_en: fix the double free during device removal

   - tools: ynl:
      - fix enum-as-flags in the generic CLI
      - fully inherit attrs in subsets
      - re-license uniformly under GPL-2.0 or BSD-3-clause

  Previous releases - regressions:

   - core: use indirect calls helpers for sk_exit_memory_pressure()

   - tls:
      - fix return value for async crypto
      - avoid hanging tasks on the tx_lock

   - eth: ice: copy last block omitted in ice_get_module_eeprom()

  Previous releases - always broken:

   - core: avoid double iput when sock_alloc_file fails

   - af_unix: fix struct pid leaks in OOB support

   - tls:
      - fix possible race condition
      - fix device-offloaded sendpage straddling records

   - bpf:
      - sockmap: fix an infinite loop error
      - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
      - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

   - netfilter: tproxy: fix deadlock due to missing BH disable

   - phylib: get rid of unnecessary locking

   - eth: bgmac: fix *initial* chip reset to support BCM5358

   - eth: nfp: fix csum for ipsec offload

   - eth: mtk_eth_soc: fix RX data corruption issue

  Misc:

   - usb: qmi_wwan: add telit 0x1080 composition"

* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  tools: ynl: fix enum-as-flags in the generic CLI
  tools: ynl: move the enum classes to shared code
  net: avoid double iput when sock_alloc_file fails
  af_unix: fix struct pid leaks in OOB support
  eth: fealnx: bring back this old driver
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  net: microchip: sparx5: fix deletion of existing DSCP mappings
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
  mailmap: update entries for Stephen Hemminger
  mailmap: add entry for Maxim Mikityanskiy
  nfc: change order inside nfc_se_io error path
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
  net: usb: qmi_wwan: add Telit 0x1080 composition
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
  netfilter: conntrack: adopt safer max chain length
  net: tls: fix device-offloaded sendpage straddling records
  ...
2023-03-09 10:56:58 -08:00
Linus Torvalds
2653e3fe33 for-linus-2023030901
-----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCAA8FiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmQJ8eweHGJlbmphbWlu
 LnRpc3NvaXJlc0ByZWRoYXQuY29tAAoJEOzF8F4Z2Uo2ff4P/j4zp6J7wfstWL5g
 Ma3u3RqRpM0HKw0tO5PeigLYGout40oW8xAH7n8ERu2o45yQAd5ZbgXVey25FTSd
 QEVd7zwN/ADMMTTujGQAfzpE6O7eaALVDgtgjOcNS8uRLeyqcDSCgBRaB8sNwLy7
 ZhHU5OWKvRCiiwTQyG7gvY9+cTre6wNjdKR2Ei+xra5IS78gp3OZ1NJOjT3iHDxe
 Zxo4kpkEaBJmVNYbC41sZfkzuZ84SfKXUC14V3BBiXmvnYU6x3WmuXxFvCgBEjgz
 agmKugHrdABa+oooONdKztHSOfa5saeYy11FO+q8txIEZqSiodr1anmk2U77Yu9O
 f4E8sQQszHMWyaqac5+dwUCaupgmKtPZOoMRjbGfGjwLObYkhxnJu6AamWYZl7DG
 E6AaO+ZV0SQcl89GpJ4+SiXSbSxUopYljzkUnvrnrOqPe4AkdWVTuCexBgGkOKqa
 DDQb+OYcI5N2aFMTOx8dkmZ6MPU7Mtot7UPTC1rv5Cgi8xFCH215dLauskDyatmt
 XQw5+9hzb1q3ZFFw6E/IhBkRcNLeAga1lsSxeqIGKkCHeEAOuCaO9ev454LD4oKk
 7nTqyKKAx+Roaw3dwCyU+U2v12B+PoYBq6BGnJtm/EnF0VuJRi8kV8J9uMXoo30j
 v4Fo/IsHUlgIiuJo556tmjcTetUm
 =XVs0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

 - fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

 - selftests config fixes (Benjamin Tissoires)

 - few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default
2023-03-09 10:17:23 -08:00
Linus Torvalds
c70e9b8ea3 m68k fixes for v6.3
- Fix systems with memory at end of 32-bit address space,
   - Fix initrd on systems where memory does not start at address zero,
   - Fix 68030 handling of bus errors for addresses in exception tables.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZAmqMBUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XAi4AEA2hE4fkPIzobqWXZrLblAYnyy4vIP
 S5TeXusdpMahnBEA/36mt2bFZFthHnfvQK/4YjBGDIQPV8+DOIt2YiYFZwIL
 =ssyX
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k fixes from Geert Uytterhoeven:

 - Fix systems with memory at end of 32-bit address space

 - Fix initrd on systems where memory does not start at address zero

 - Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space
2023-03-09 10:08:46 -08:00
Al Viro
573b22ccb7 sh: sanitize the flags on sigreturn
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-09 10:01:59 -08:00
José Roberto de Souza
c4298d1577 drm/i915/display/mtl: Program latch to phy reset
Latch reset of phys during DC9 and when driver is unloaded to avoid
phy reset.

Specification ask us to program it closer to the step that enables
DC9 in DC_STATE_EN but doing this way allow us to sanitize the phy
latch during driver load.

BSpec: 49197
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-6-radhakrishna.sripada@intel.com
2023-03-09 09:44:53 -08:00
Tejas Upadhyay
561b31acfd drm/i915/fbdev: lock the fbdev obj before vma pin
lock the fbdev obj before calling into
i915_vma_pin_iomap(). This helps to solve below :

<7>[   93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[   93.581844] ------------[ cut here ]------------
<4>[   93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915]

Fixes: f0b6b01b3e ("drm/i915: Add ww context to intel_dpt_pin, v2.")
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
2023-03-09 09:44:42 -08:00
Radhakrishna Sripada
0188be507b drm/i915/mtl: Fix Wa_16015201720 implementation
The commit 2357f2b271 ("drm/i915/mtl: Initial display workarounds")
extended the workaround Wa_16015201720 to MTL. However the registers
that the original WA implemented moved for MTL.

Implement the workaround with the correct register.

v3: Skip clock gating for pipe C, D DMC's and fix the title

Fixes: 2357f2b271 ("drm/i915/mtl: Initial display workarounds")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-2-radhakrishna.sripada@intel.com
2023-03-09 09:40:17 -08:00
Jens Axboe
fa780334a8 io_uring: silence variable ‘prev’ set but not used warning
If io_uring.o is built with W=1, it triggers a warning:

io_uring/io_uring.c: In function ‘__io_submit_flush_completions’:
io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
 1502 |         struct io_wq_work_node *node, *prev;
      |                                        ^~~~

which is due to the wq_list_for_each() iterator always keeping a 'prev'
variable. Most users need this to remove an entry from a list, for
example, but __io_submit_flush_completions() never does that.

Add a basic helper that doesn't track prev instead, and use that in
that function.

Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-09 10:10:58 -07:00
Thomas Weißschuh
f0312cbd2a edd: make kobj_type structure constant
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definition to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230227-kobj_type-firmware-edd-v1-1-c626afe5bd05@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 18:07:33 +01:00
Linus Walleij
1274b37ab3 misc: microchip: pci1xxxx: Convert to immutable irqchip
Convert the driver to immutable irq-chip with a bit of
intuition.

Cc: linux-gpio@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230223133252.2257276-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 18:07:29 +01:00
Roman Gushchin
38ed310c22 firmware: xilinx: don't make a sleepable memory allocation from an atomic context
The following issue was discovered using lockdep:
[    6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[    6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[    6.702431] 2 locks held by swapper/0/1:
[    6.706300]  #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[    6.714900]  #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[    6.723156] irq event stamp: 304030
[    6.726596] hardirqs last  enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[    6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[    6.744742] softirqs last  enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[    6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[    6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G     U            5.15.36 #2
[    6.768048] Hardware name: xlnx,zynqmp (DT)
[    6.772179] Call trace:
[    6.774584]  dump_backtrace+0x0/0x300
[    6.778197]  show_stack+0x18/0x30
[    6.781465]  dump_stack_lvl+0xb8/0xec
[    6.785077]  dump_stack+0x1c/0x38
[    6.788345]  ___might_sleep+0x1a8/0x2a0
[    6.792129]  __might_sleep+0x6c/0xd0
[    6.795655]  kmem_cache_alloc_trace+0x270/0x3d0
[    6.800127]  do_feature_check_call+0x100/0x220
[    6.804513]  zynqmp_pm_invoke_fn+0x8c/0xb0
[    6.808555]  zynqmp_pm_clock_getstate+0x90/0xe0
[    6.813027]  zynqmp_pll_is_enabled+0x8c/0x120
[    6.817327]  zynqmp_pll_enable+0x38/0xc0
[    6.821197]  clk_core_enable+0x144/0x400
[    6.825067]  clk_core_enable+0xd4/0x400
[    6.828851]  clk_core_enable+0xd4/0x400
[    6.832635]  clk_core_enable+0xd4/0x400
[    6.836419]  clk_core_enable+0xd4/0x400
[    6.840203]  clk_core_enable+0xd4/0x400
[    6.843987]  clk_core_enable+0xd4/0x400
[    6.847771]  clk_core_enable+0xd4/0x400
[    6.851555]  clk_core_enable_lock+0x24/0x50
[    6.855683]  clk_enable+0x24/0x40
[    6.858952]  fclk_probe+0x84/0xf0
[    6.862220]  platform_probe+0x8c/0x110
[    6.865918]  really_probe+0x110/0x5f0
[    6.869530]  __driver_probe_device+0xcc/0x210
[    6.873830]  driver_probe_device+0x64/0x140
[    6.877958]  __driver_attach+0x114/0x1f0
[    6.881828]  bus_for_each_dev+0xe8/0x160
[    6.885698]  driver_attach+0x34/0x50
[    6.889224]  bus_add_driver+0x228/0x300
[    6.893008]  driver_register+0xc0/0x1e0
[    6.896792]  __platform_driver_register+0x44/0x60
[    6.901436]  fclk_driver_init+0x1c/0x28
[    6.905220]  do_one_initcall+0x104/0x590
[    6.909091]  kernel_init_freeable+0x254/0x2bc
[    6.913390]  kernel_init+0x24/0x130
[    6.916831]  ret_from_fork+0x10/0x20

Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation.

Fixes: acfdd18591 ("firmware: xilinx: Use hash-table for api feature check")
Cc: stable <stable@kernel.org>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 18:00:31 +01:00
Samuel Thibault
18365ebf23 tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
In ioctl(KD_FONT_OP_GET_TALL), userland tells through op->height which
vpitch should be used to copy over the font. In con_font_get, we were
not checking that it is within the maximum height value, and thus
userland could make the vc->vc_sw->con_font_get(vc, &font, vpitch);
call possibly overflow the allocated max_font_size bytes, and the
copy_to_user(op->data, font.data, c) call possibly read out of that
allocated buffer.

By checking vpitch against max_font_height, the max_font_size buffer
will always be large enough for the vc->vc_sw->con_font_get(vc, &font,
vpitch) call (since we already prevent loading a font larger than that),
and c = (font.width+7)/8 * vpitch * font.charcount will always remain
below max_font_size.

Fixes: 24d69384bc ("VT: Add KD_FONT_OP_SET/GET_TALL operations")
Reported-by: syzbot+3af17071816b61e807ed@syzkaller.appspotmail.com
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230306094921.tik5ewne4ft6mfpo@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:56:56 +01:00
Nava kishore Manne
995a3bb721 fpga: zynqmp-fpga: Adds status interface
Adds status interface for zynqmp-fpga. It's a read only interface
which allows the user to get the Programmable Logic(PL) configuration
status.

Usage:
To read the Programmable Logic(PL) configuration status.
cat /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status

Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230224120738.329416-3-nava.kishore.manne@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:33:19 +01:00
Nava kishore Manne
8f118f6154 firmware: xilinx: Add pm api function for PL config reg readback
Adds PM API for performing Programmable Logic(PL) configuration
register readback. It provides an interface to the firmware(pmufw)
to readback the FPGA configuration register.

Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230224120738.329416-2-nava.kishore.manne@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:33:19 +01:00
Bjorn Helgaas
1a0aae8830 misc: genwqe: Drop redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307202435.880921-1-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:33:00 +01:00
Bjorn Helgaas
8efc52743e misc: alcor_pci: Use PCI core to manage ASPM instead of open-coding
"priv->ext_config_dev_aspm" was never set to a non-zero value.  Therefore,
alcor_pci_aspm_ctrl(priv, 1) did nothing, and alcor_pci_aspm_ctrl(priv, 0)
always disabled ASPM in the device and the upstream bridge.

The driver disabled ASPM in alcor_pci_probe() and alcor_resume(), so it's
possible the device doesn't work well when ASPM is enabled.

Remove all the ASPM-related code and replace the alcor_pci_aspm_ctrl(0)
calls with pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
PCIE_LINK_STATE_L1), which asks the PCI core to disable ASPM.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20230307213816.886308-1-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:32:34 +01:00
Luis Chamberlain
b085dbf6c9 sgi-xp: simplify sysctl registration
Although this driver is a good use case for having a directory
that is not other directories and then subdirectories with more
entries, the usage of register_sysctl_table() can recurse and
increases complexity so to avoid that just split out the
registration to each directory with its own entries.

register_sysctl_table() is a deprecated compatibility wrapper.
register_sysctl() can do the directory creation for you so just use
that.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20230302204612.782387-6-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:32:13 +01:00
Uwe Kleine-König
9263271a61 misc: sram: Improve and simplify clk handling
The current code tries to get an associated clk, ignores any errors in the
process and if there is a clock enables it unconditionally for the whole
lifetime of the sram device.

Instead use an "optional" variant of devm_clk_get() which handles the case
where no clk is needed for the sram device and do proper error handling
for the remaining error cases. Also use an "enabled" variant of
devm_clk_get() to simplify. With that .probe() is the only function using
struct sram_dev::clk, so it can be replaced by a local variable.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230302091251.1852454-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:31:53 +01:00
Marco Pagani
7ef1a2c1c9 fpga: bridge: fix kernel-doc parameter description
Fix the kernel-doc description for the "struct fpga_image_info *info"
parameter of the fpga_bridge_get() function.

Fixes: 060ac5c8fa ("fpga: bridge: kernel-doc fixes")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230301140309.512578-1-marpagan@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:31:41 +01:00
Thomas Weißschuh
81773c98a8 firmware: dmi-sysfs: make kobj_type structures constant
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230227-kobj_type-firmware-dmi-v1-1-d1131d4e7a2b@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:31:16 +01:00
Jiri Slaby
9b12f050c7 char: pcmcia: remove all the drivers
These char PCMCIA drivers are buggy[1] and receive only minimal care. It
was concluded[2], that we should try to remove most pcmcia drivers
completely. Let's start with these char broken one.

Note that I also removed a UAPI header: include/uapi/linux/cm4000_cs.h.
I found only coccinelle tests mentioning some ioctl constants from that
file. But they are not actually used. Anyway, should someone complain,
we may reintroduce the header (or its parts).

[1] https://lore.kernel.org/all/f41c2765-80e0-48bc-b1e4-8cfd3230fd4a@www.fastmail.com/
[2] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: "Hyunwoo Kim" <imv4bel@gmail.com>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230222092302.6348-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:30:27 +01:00
Jiri Slaby
3996954fa0 tty: ipwireless: move Kconfig entry to tty
The ipwireless' Kconfig entry is currently sitting in char/pcmcia. But
the driver is in tty/. So move the entry to tty/ too.

First, it makes sense to have the entry along the driver. Second, whole
char/pcmcia is about to pass away.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20230222092302.6348-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:30:27 +01:00
Johan Hovold
b6a7bac184 serial: qcom-geni: drop bogus uart_write_wakeup()
Drop the bogus uart_write_wakeup() from when setting up a new DMA
transfer, which does not free up any more space in the ring buffer.

Any pending writers will be woken up when the transfer completes.

Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Link: https://lore.kernel.org/r/20230307164405.14218-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:27:53 +01:00
Johan Hovold
97820780b7 serial: qcom-geni: fix mapping of empty DMA buffer
Make sure that there is data in the ring buffer before trying to set up
a zero-length DMA transfer.

This specifically fixes the following warning when unmapping the empty
buffer on the sc8280xp-crd:

   WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8
   ...
   Call trace:
    iommu_dma_unmap_page+0xbc/0xd8
    dma_unmap_page_attrs+0x30/0x1c8
    geni_se_tx_dma_unprep+0x28/0x38
    qcom_geni_serial_isr+0x358/0x75c

Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Link: https://lore.kernel.org/r/20230307164405.14218-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:27:50 +01:00
Johan Hovold
95fcfc0853 serial: qcom-geni: fix DMA mapping leak on shutdown
Fix what appears to be a copy-paste error that can lead to a leaked DMA
mapping on close() and failure to restart TX after the port is reopened.

Note that rx_dma_addr is generally NULL when
qcom_geni_serial_stop_tx_dma() is called as part of shutdown() (but
tx_dma_addr need not be).

Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Link: https://lore.kernel.org/r/20230307164405.14218-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:27:47 +01:00
Johan Hovold
9aff74cc4e serial: qcom-geni: fix console shutdown hang
A recent commit added back the calls top stop tx and rx to shutdown()
which had previously been removed by commit e83766334f ("tty: serial:
qcom_geni_serial: No need to stop tx/rx on UART shutdown") in order to
be able to use kgdb after stopping the getty.

Not only did this again break kgdb, but it also broke serial consoles
more generally by hanging TX when stopping the getty during reboot.

The underlying problem has been there since the driver was first merged
and fixing it is going to be a bit involved so simply stop calling the
broken stop functions during shutdown for consoles for now.

Fixes: d8aca2f968 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown")
Cc: stable <stable@kernel.org>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Link: https://lore.kernel.org/r/20230307164405.14218-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:27:44 +01:00
Jens Axboe
03b3d6be73 io_uring/uring_cmd: ensure that device supports IOPOLL
It's possible for a file type to support uring commands, but not
pollable ones. Hence before issuing one of those, we should check
that it is supported and error out upfront if it isn't.

Cc: stable@vger.kernel.org
Fixes: 5756a3a7e7 ("io_uring: add iopoll infrastructure for io_uring_cmd")
Link: https://github.com/axboe/liburing/issues/816
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-09 09:23:59 -07:00
Petr Mladek
571079f5ba Documentation/serial-console: Document the behavior when the last console= parameter is not used
The console= kernel command-line parameter defines where the kernel
messages appear. It can be used multiple times to make the kernel log
visible on more devices.

The ordering of the console= parameters is important. In particular,
the last one defines which device can be accessed also via /dev/console.

The behavior is more complicated when the last console= parameter is
ignored by kernel. It might be surprising because it was not intentional.
The kernel just works this way historically.

There were few attempts to change the behavior. Unfortunately, it can't
be done because it would break existing users. Document the historical
behavior at least.

Link: https://lore.kernel.org/r/20170606143149.GB7604@pathway.suse.cz
Link: https://lore.kernel.org/r/20230213113912.1237943-1-rkanwal@rivosinc.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230308112433.24292-1-pmladek@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:23:05 +01:00
Biju Das
b22ea7df56 serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
As per RZ/V2M hardware manual(Rev.1.30 Jun, 2022), UART IP has a
restriction as mentioned below.

40.6.1 Point for Caution when Changing the Register Settings:

When changing the settings of the following registers, a PRESETn master
reset or FIFO reset + SW reset (FCR[2],FCR[1], HCR0[7]) must be input to
re-initialize them.

Target Registers: FCR, LCR, MCR, DLL, DLM, HCR0.

Add serial8250_em_reg_update() and serial8250_em_serial_out_helper() to
handle this restriction. serial8250_em_serial_out_helper() is identical to
previous serial8250_em_serial_out() except that UART_FCR macro is removed
from serial8250_em_serial_out_helper() as it is now handled by serial8250_
em_serial_out().

DLL/DLM register can be updated only by setting LCR[7]. So the
updation of LCR[7] will perform reset for DLL/DLM register changes.

EMMA mobile has the same register set as RZ/V2M and this patch is tested on
EMEV2 board. So, there is no harm in applying the same restriction here as
well as the HW manual for EMMA mobile is not updated for a long time.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-8-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
59d6558fb5 serial: 8250_em: Use pseudo offset for UART_FCR
UART_FCR shares the same offset with UART_IIR. We cannot use UART_FCR
in serial8250_em_serial_in() as it overlaps with UART_IIR.

Define UART_FCR_EM macro with a high value to avoid overlapping
with existing UART_* register defines and define another macro
UART_FCR_EM_HW for the real offset.

Use these macros in serial8250_em_serial{_in/_out} function to
read/write FCR register.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-7-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
7eada8a122 serial: 8250_em: Use devm_clk_get_enabled()
Simplify clk handling in probe() by replacing devm_clk_get()->devm_
clk_get_enabled(). This replaces the usage of clk_prepare_enable/clk_
disable_unprepare() in probe()/remove(). After that sclk is no
longer required in struct serial8250_em_priv and is replaced by a
local variable sclk in probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-6-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
54769d8656 serial: 8250_em: Add missing break statement
Add missing break statement in serial8250_em_serial_out().

Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-5-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
e335354d23 serial: 8250_em: Drop unused header file
Drop unused header file slab.h from the driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
6b5f1e2e22 serial: 8250_em: Simplify probe()
Simplify probe() by using dev_err_probe() instead of dev_err() and
add a local variable 'dev' to replace '&pdev->dev'.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:54 +01:00
Biju Das
302a22a4fa serial: 8250_em: Fix UART port type
As per HW manual for  EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART
IP found on EMMA mobile SoC is Register-compatible with the
general-purpose 16750 UART chip. Fix UART port type as 16750 and
enable 64-bytes fifo support.

Fixes: 22886ee968 ("serial8250-em: Emma Mobile UART driver V2")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:52 +01:00
Martin Blumenstingl
f335201ba2 arm64: dts: meson-g12-common: Use the G12A UART compatible string
Switch meson-12-common.dtsi to use the Meson G12A specific UART
compatible string. This enables the "divide XTAL by 2" divider which
improves support for UART attached Bluetooth modules (for example
RTL8822CS) running at a baud rate of 1500000. Without dividing XTAL
(24MHz) by 2 a baud rate of 1500000 cannot be generated cleanly and the
resulting jitter breaks communication with the module.

Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230307222651.2106615-4-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:02 +01:00
Martin Blumenstingl
804e6d6998 tty: serial: meson: Add a new compatible string for the G12A SoC
Amlogic Meson G12A (and later) SoCs also have the "divide XTAL by 2" bit
as the S4 UART controllers. Add a new compatible string for these SoCs
and enable the has_xtal_div2 flag for them.

Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230307222651.2106615-3-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:02 +01:00
Martin Blumenstingl
add5dfe87a dt-bindings: serial: amlogic,meson-uart: Add compatible string for G12A
Amlogic G12A SoCs gained a new "divide XTAL by 2" bit. Everything else
(we know about) is identical to the UART IP on GX (GXBB/GXL/GXM) SoCs.
Add a new compatible string for this SoC so this new bit can be managed
accordingly while keeping "amlogic,meson-gx-uart" as fallback compatible
string.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:21:02 +01:00
Bernhard Rosenkränzer
cb46a3e2d6 dt-bindings: serial: mediatek,uart: add MT8365
Add binding description for mediatek,mt8365-uart

Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309143459.401783-3-bero@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:20:15 +01:00
Christophe JAILLET
85bce38a7e serial: 8250: Reorder fields in 'struct plat_serial8250_port'
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct plat_serial8250_port'
from 144 to 128 bytes.

It saves a few bytes of memory.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f3cb1efe1454e0615840fd331ee335bc441589a9.1676665358.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:17:10 +01:00
Marek Vasut
c47527cbcc serial: stm32: Re-assert RTS/DE GPIO in RS485 mode only if more data are transmitted
The stm32_usart_transmit_chars() may be called with empty or stopped
transmit queue, and no XON/OFF character pending. This can happen at
the end of transmission, where this last call is used to either handle
the XON/XOFF x_char, or disable TX interrupt if queue is empty or
stopped.

If that occurs, do not assert the RS485 RTS/DE GPIO anymore, as the
GPIO would remain asserted past the end of transmission and that would
block the RS485 bus after the transmission.

Only assert the RS485 RTS/DE GPIO if there is either pending XON/XOFF
x_char, or at least one character in running transmit queue.

Fixes: d7c7671616 ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230223042252.95480-2-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:16:11 +01:00
Marek Vasut
b4fd0afaa0 serial: stm32: Remove unused struct stm32_port txdone element
The txdone element is only ever assigned, once, and never used. Drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230223042252.95480-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:16:11 +01:00
Luis Chamberlain
6d12b774c9 tty: simplify sysctl registration
register_sysctl_table() is a deprecated compatibility wrapper.
register_sysctl_init() can do the directory creation for you so just use
that

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230302204612.782387-7-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:15:49 +01:00
Uwe Kleine-König
46ce64bbfe serial: imx: Drop a few unneeded casts
There is no point in casting a struct uart_port to a struct imx_port
just to access the first member of the latter (a struct uart_port).

This introduces no code changes.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230302115417.1860210-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:12:33 +01:00
Marek Vasut
872eb918d8 dt-bindings: serial: imx: Document mandatory clock properties
The UART IP must be connected to clock, document the properties in DT bindings.
Update example to match Linux arch/arm/boot/dts/imx51.dtsi .

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230219142250.10176-2-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:12:10 +01:00
Marek Vasut
cf8d4027a7 dt-bindings: serial: imx: Document optional DMA properties
The UART IP can be connected to DMA engine, document the properties in DT bindings.
Update example to match Linux arch/arm/boot/dts/imx51.dtsi .

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230219142250.10176-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:12:10 +01:00
Li zeming
728648c7c8 tty: tty_ldisc: Remove the ret variable
The int variable ret does not receive the return value in this function.
It should be removed and returned 0 directly.

Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230222202303.3195-1-zeming@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:11:18 +01:00
Saravana Kannan
1a5ecc73b2 serdev: Set fwnode for serdev devices
This allow fw_devlink to do dependency tracking for serdev devices.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/lkml/03b70a8a-0591-f28b-a567-9d2f736f17e5@gmail.com/
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230302023509.319903-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:09:56 +01:00
Alexander Sverdlin
1be6f2b15f tty: serial: fsl_lpuart: fix race on RX DMA shutdown
From time to time DMA completion can come in the middle of DMA shutdown:

<process ctx>:				<IRQ>:
lpuart32_shutdown()
  lpuart_dma_shutdown()
    del_timer_sync()
					lpuart_dma_rx_complete()
					  lpuart_copy_rx_to_tty()
					    mod_timer()
    lpuart_dma_rx_free()

When the timer fires a bit later, sport->dma_rx_desc is NULL:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
pc : lpuart_copy_rx_to_tty+0xcc/0x5bc
lr : lpuart_timer_func+0x1c/0x2c
Call trace:
 lpuart_copy_rx_to_tty
 lpuart_timer_func
 call_timer_fn
 __run_timers.part.0
 run_timer_softirq
 __do_softirq
 __irq_exit_rcu
 irq_exit
 handle_domain_irq
 gic_handle_irq
 call_on_irq_stack
 do_interrupt_handler
 ...

To fix this fold del_timer_sync() into lpuart_dma_rx_free() after
dmaengine_terminate_sync() to make sure timer will not be re-started in
lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete().

Fixes: 4a8588a1cf ("serial: fsl_lpuart: delete timer on shutdown")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:09:06 +01:00
Kumaravel Thiagarajan
5d943b5d69 serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
Commit 32bb477fa7 ("serial: 8250_pci1xxxx: Add driver for quad-uart
support") made the SERIAL_8250_PCI1XXXX driver enabled when SERIAL_8250
is enabled, disable it as this driver does not need to be enabled by
default

Fixes: 32bb477fa7 ("serial: 8250_pci1xxxx: Add driver for quad-uart support")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/lkml/CAHk-=whhFCeeuo6vTEmNSx6S-KKkugxgzN_W5Z6v-9yH9gc3Zw@mail.gmail.com/
Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230305145124.13444-1-kumaravel.thiagarajan@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09 17:08:15 +01:00