Commit graph

1,185,212 commits

Author SHA1 Message Date
Krzysztof Kozlowski
6dc01bc640 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
The DisplayPort and MIPI phys are actually part of the Power Management
Unit system controller.  They do not have their own address space, thus
keeping the nodes under soc causes warnings:

  exynos5250-arndale.dtb: soc: video-phy-0: {'compatible': ['samsung,exynos5250-dp-video-phy'],
    'samsung,pmu-syscon': [[20]], '#phy-cells': [[0]], 'phandle': [[24]]} should not be valid under {'type': 'object'}

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230127194057.186458-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06 12:33:32 +01:00
Krzysztof Kozlowski
972b567075 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
The DisplayPort and MIPI phys are actually part of the Power Management
Unit system controller.  They do not have their own address space, thus
keeping the nodes under soc causes warnings:

  exynos5420-smdk5420.dtb: soc: dp-video-phy: {'compatible': ['samsung,exynos5420-dp-video-phy'],
    'samsung,pmu-syscon': [[11]], '#phy-cells': [[0]], 'phandle': [[16]]} should not be valid under {'type': 'object'}

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230127194057.186458-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06 12:33:26 +01:00
Florian Westphal
4a02426787 netfilter: tproxy: fix deadlock due to missing BH disable
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.

Functions that are called from either xtables or nftables must assume
that they can be called in process context.

inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.

Add a small helper that takes care of this and use it.

Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-06 12:09:48 +01:00
Ivan Delalande
9f7dd42f0d netfilter: ctnetlink: revert to dumping mark regardless of event type
It seems that change was unintentional, we have userspace code that
needs the mark while listening for events like REPLY, DESTROY, etc.
Also include 0-marks in requested dumps, as they were before that fix.

Fixes: 1feeae0715 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-03-06 12:09:23 +01:00
Andy Shevchenko
380c7ba392 gpiolib: Clean up headers
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
5b1911976c gpiolib: Group forward declarations in consumer.h
For better maintenance group the forward declarations together.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
91e5ae95a0 gpiolib: Deduplicate forward declarations in consumer.h
The struct fwnode_handle pointer is used in both branches of ifdeffery,
no need to have a copy of the same in each of them, just make it global.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
6cfd84c4f4 gpiolib: Drop unused forward declaration from driver.h
There is no struct device_node pointers anywhere in the header,
drop unused forward declaration.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
e79098ac29 gpio: regmap: Add missing header(s)
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, split out the GPIO group of headers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
d74c0863fd gpio: reg: Add missing header(s)
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, split out the GPIO group of headers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:02 +02:00
Andy Shevchenko
39ebbd52b7 gpio: aggregator: Add missing header(s)
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, drop unused linux/gpio.h and split out the GPIO group of
headers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 12:33:02 +02:00
Arnd Bergmann
a99cc66807 gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.

Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
a8e59744e1 gpiolib: split linux/gpio/driver.h out of linux/gpio.h
Almost all gpio drivers include linux/gpio/driver.h, and other
files should not rely on includes from this header.

Remove the indirect include from here and include the correct
headers directly from where they are used.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lee Jones <lee@kernel.org>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
d74e316633 gpiolib: remove legacy gpio_export()
There are only a handful of users of gpio_export() and
related functions.

As these are just wrappers around the modern gpiod_export()
helper, remove the wrappers and open-code the gpio_to_desc
in all callers to shrink the legacy API.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
0e685c3e71 gpiolib: remove gpio_set_debounce()
gpio_set_debounce() only has a single user, which is trivially
converted to gpiod_set_debounce().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
eccb7a0061 gpiolib: remove asm-generic/gpio.h
The asm-generic/gpio.h file is now always included when
using gpiolib, so just move its contents into linux/gpio.h
with a few minor simplifications.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
94d20f7d67 gpiolib: coldfire: remove custom asm/gpio.h
Now that coldfire is the only user of a custom asm/gpio.h, it seems
better to remove this as well, and have the same interface everywhere.

For the gpio_get_value()/gpio_set_value()/gpio_to_irq(), gpio_cansleep()
functions, the custom version is only a micro-optimization to inline the
function for constant GPIO numbers. However, in the coldfire defconfigs,
I was unable to find a single instance where this micro-optimization
was even used, and according to Geert the only user appears to be the
QSPI chip that is disabled everywhere.

The custom gpio_request_one() function is even less useful, as it is
guarded by an #ifdef that is never true.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Arnd Bergmann
ee5a66d87c gpiolib: remove empty asm/gpio.h files
The arm and sh versions of this file are identical to the generic
versions and can just be removed.

The drivers that actually use the sh3 specific version also include
cpu/gpio.h directly, with the exception of magicpanelr2, which is
easily fixed. This leaves coldfire as the only gpio driver
that needs something custom for gpiolib.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
2023-03-06 12:33:01 +02:00
Linus Walleij
21d9526d13 gpiolib: Make the legacy <linux/gpio.h> consumer-only
The legacy <linux/gpio.h> header was an all-inclusive header used
by drivers and consumers alike. After eliminating the last users
of the driver defines, we can drop the inclusion of the
<linux/gpio/driver.h> header.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Linus Walleij
3b541b890e hte: tegra-194: Use proper includes
The test driver uses the gpiod consumer API so include the right
<linux/gpio/consumer.h> header. This may cause a problem with
struct of_device_id being implcitly pulled in by the legacy
header <linux/gpio.h> so include <linux/mod_devicetable.h>
explicitly as well.

While at it, drop explicit moduleparam.h (it's included with module.h)
and sort the headers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Linus Walleij
7a49bfde01 ARM: s3c64xx: Use the right include
The file s3c64xx.c is including <linux/gpio.h> despite using no
symbols from the file, however it needs it to implicitly bring in
of_have_populated_dt() so include <linux/of.h> explicitly instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:01 +02:00
Linus Walleij
d1143d5007 ARM: orion/gpio: Use the right include
This is a GPIO driver so include <linux/gpio/driver.h> and not
the legacy <linux/gpio.h> header. Switch a single call to the
legacy API and use <linux/gpio/consumer.h> as well.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-03-06 12:33:00 +02:00
Randy Dunlap
d49765b5f4 gpio: GPIO_REGMAP: select REGMAP instead of depending on it
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: ebe363197e ("gpio: add a reusable generic gpio_chip using regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 11:16:56 +01:00
Jiapeng Chong
ff6f38eb92 wifi: rtlwifi: rtl8192se: Remove some unused variables
Variables bcntime_cfg, bcn_cw and bcn_ifs are not effectively used, so
delete them.

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:1555:6: warning: variable 'bcntime_cfg' set but not used.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4240
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230302023911.59278-1-jiapeng.chong@linux.alibaba.com
2023-03-06 12:10:06 +02:00
Martin Blumenstingl
15c8e267df wifi: rtw88: mac: Return the original error from rtw_mac_power_switch()
rtw_mac_power_switch() calls rtw_pwr_seq_parser() which can return
-EINVAL, -EBUSY or 0. Propagate the original error code instead of
unconditionally returning -EINVAL in case of an error.

Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-3-martin.blumenstingl@googlemail.com
2023-03-06 12:09:34 +02:00
Martin Blumenstingl
b7ed9fa2cb wifi: rtw88: mac: Return the original error from rtw_pwr_seq_parser()
rtw_pwr_seq_parser() calls rtw_sub_pwr_seq_parser() which can either
return -EBUSY, -EINVAL or 0. Propagate the original error code instead
of unconditionally returning -EBUSY in case of an error.

Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230226221004.138331-2-martin.blumenstingl@googlemail.com
2023-03-06 12:09:34 +02:00
Konrad Dybcio
e5c3da9abd wifi: brcmfmac: pcie: Add 4359C0 firmware definition
Some phones from around 2016, as well as other random devices have
this chip called 43956 or 4359C0 or 43596A0, which is more or less
just a rev bump (v9) of the already-supported 4359. Add a corresponding
firmware definition to allow for choosing the correct blob.

Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230224-topic-brcm_tone-v1-1-333b0ac67934@linaro.org
2023-03-06 12:09:03 +02:00
Chih-Kang Chang
5c48f9432d wifi: rtw89: fix SER L1 might stop entering LPS issue
When SER L1 triggered, driver need to stop Rx and clear RTW89_FLAG_RUNNING
flag. If track_work check RTW89_FLAG_RUNNING simultaneously, it will check
failed and never queue track_work again, and LPS won't enter either.
Therefore, we cancel delayed work when enter SER L1, and queue delayed work
when leave SER L1.

Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230224082117.21241-1-pkshih@realtek.com
2023-03-06 12:05:59 +02:00
Nick Alcock
0d8b4049bb kbuild, gpio: gpio-aspeed-sgpio: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 10:59:07 +01:00
Nick Alcock
70e1114eb7 kbuild, gpio: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-unisoc@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 10:57:49 +01:00
Sanjay R Mehta
7af9da8ce8 thunderbolt: Add quirk to disable CLx
Add QUIRK_NO_CLX to disable the CLx state for hardware which
doesn't supports it.

AMD Yellow Carp and Pink Sardine don't support CLx state,
hence disabling it using QUIRK_NO_CLX.

Cc: stable@vger.kernel.org
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
[mw: added debug log when the quirk is run]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-03-06 11:54:44 +02:00
Trevor Woerner
db9da1959d dt-bindings: gpio.txt: expand gpio-line-names recommendations
Provide more guidance to differentiate between recommendations for names of
lines which are hard-wired to on-board devices, versus recommendations for
names of lines which are connected to general-purpose pin headers.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 10:52:42 +01:00
Linh Phung
b37d57e1da pinctrl: renesas: r8a779g0: Add Audio SSI pins, groups, and functions
Add pins, groups, and functions for the Serial Sound Interface (SSI) on
the Renesas R-Car V4H (R8A779G0) SoC.

Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87bkmcang2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:51:13 +01:00
Linh Phung
59e579a6af pinctrl: renesas: r8a779g0: Add Audio Clock pins, groups, and functions
Add pins, groups, and functions for the Audio Clock on the Renesas R-Car
V4H (R8A779G0) SoC.

Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cz6sanga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:51:13 +01:00
Phong Hoang
60003351e9 pinctrl: renesas: r8a779f0: Fix tsn1_avtp_pps pin group
Correct a typo mistake in the definition of the tsn1_avtp_pps pin group
mux.

Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes: babe298e9c ("pinctrl: renesas: r8a779f0: Add Ethernet pins, groups, and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/45ea6e87b91c36fd0b9706cf58ff50a4d1a99c44.1674825039.git.geert+renesas@glider.be
2023-03-06 10:51:13 +01:00
Hai Pham
a145c9a867 pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configuration
AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both
PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array.

The latter are correct, hence remove the former.
Without this fix, the Ethernet PHY is not operational on the MDIO bus.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Fixes: 741a7370fc ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be
2023-03-06 10:51:12 +01:00
Linus Walleij
63de20ca24 gpio: pmic-eic-sprd: Move Kconfig to MFD expanders
The Spreadtrum PMIC EIC interrupt controller is part of an
MFD expander and should thus be in the MFD GPIO expander
menu section with the rest. Move it.

Cc: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 10:51:02 +01:00
Niklas Söderlund
4077043be2 arm64: dts: renesas: white-hawk-csi-dsi: Add and connect MAX96712
The sub-board contains two MAX96712 connected to the main-board using
I2C and CSI-2, record the connections. Also enable all nodes (VIN, CSI-2
and ISP) that are part of the downstream video capture pipeline.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230211150012.3824154-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Niklas Söderlund
d435d437ce arm64: dts: renesas: r8a779g0: Add and connect all CSI-2, ISP and VIN nodes
The V4H have 16 VIN, 2 CSI-2 and 2 ISP nodes that interact with each
other for video capture. Add all nodes and record how they are
interconnected.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230211150012.3824154-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Wolfram Sang
109e28af2b arm64: dts: renesas: r8a779f0: Use proper labels for thermal zones
The documentation provides information about the placement of the zones,
so that can be used for more descriptive labels.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230209200735.3882-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Geert Uytterhoeven
d8ac71d296 arm64: dts: renesas: r8a779g0: Add thermal nodes
Add device nodes for the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) and the various thermal
zones on the Renesas R-Car V4H (R8A779G0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b92a1a28afb9f75f24f0137af9f77e95d7ebaec3.1675959327.git.geert+renesas@glider.be
2023-03-06 10:50:29 +01:00
Biju Das
6ec5791375 arm64: dts: renesas: rzv2mevk2: Add uart0 pins
Add uart0 pins in pinctrl node and update the uart0 node
to include pinctrl and uart-has-rtscts properties.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230209131422.192941-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Lad Prabhakar
8b6a006c91 arm64: dts: renesas: Drop specifying the GIC_CPU_MASK_SIMPLE() for GICv3 systems
The GICv3 interrupts binding does not have a cpumask. The CPU mask only
applies to pre-GICv3. So just drop using them from GICv3 systems.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230206002136.29401-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Lad Prabhakar
c2b92d7e90 arm64: dts: renesas: r9a07g044: Add Cortex-A55 PMU node
Enable the performance monitor unit for the Cortex-A55 cores on the
RZ/G2L (r9a07g044) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230206001300.28937-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
Lad Prabhakar
805ed6d67b arm64: dts: renesas: r9a07g043u: Add Cortex-A55 PMU node
Enable the performance monitor unit for the Cortex-A55 core on the
RZ/G2UL (r9a07g043u) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230206001133.28776-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:50:29 +01:00
William Breathitt Gray
b961b2aa2f gpio: 104-dio-48e: Utilize mask_buf_def in handle_mask_sync() callback
The mask_buf_def argument provides a mask of all the maskable lines.
Utilize mask_buf_def rather than hardcode an "all_masked" mask.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-06 10:49:53 +01:00
Geert Uytterhoeven
320dfca630 arm64: dts: renesas: rcar-gen3: Remove bogus "turbo-mode" properties
On several R-Car Gen3(e) SoCs, multiple (up to 4) operating points in
the same cluster are marked with the "turbo-mode" property, which is
meant only for operating points beyond "Normal Mode".

Fix this by dropping the property from all operating points but the
"High Performance" one.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/866d06aec09e5a86dba11970f93a728b3e34e9f5.1675335086.git.geert+renesas@glider.be
2023-03-06 10:48:28 +01:00
Nam Nguyen
79d9cfa9d3 arm64: dts: renesas: v3hsk: Add clock-skew for GEther's Micrel PHY
Add the missing clock-skew property for the GEther's Micrel KSZ9031 PHY.

Signed-off-by: Nam Nguyen <nam.nguyen.yh@renesas.com>
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/39ab4e92d2242e1d7e83db92f91fc6e0e7e76c47.1675334998.git.geert+renesas@glider.be
2023-03-06 10:48:27 +01:00
Geert Uytterhoeven
10fb3e2746 arm64: dts: renesas: falcon: Describe CAN clock
Describe the 40 MHz Crystal Clock Oscillator providing CAN_CLK.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0bf36a1708ad87c00455b96ebaacc63fb7305b7a.1675164686.git.geert+renesas@glider.be
2023-03-06 10:48:27 +01:00
Fabrizio Castro
b6c0be722b arm64: dts: renesas: rzv2mevk2: Add uSD card and eMMC support
The RZ/V2M EVK comes with a slot for a uSD card, and an eMMC.
Add support for the both of them.

Please note that the pinctrl driver for RZ/V2M doesn't support
interrupts yet, therefore the card detect pin has been connected
to the SDHI IP directly in this patch.
We'll connect the card detect pin to its corresponding GPIO when
we'll have driver support for interrupts in the RZ/V2M pinctrl
driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230130191152.182826-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06 10:48:27 +01:00