Commit graph

1,185,212 commits

Author SHA1 Message Date
Christian Hewitt
0e1598a112 dt-bindings: arm: amlogic: add support for BananaPi M2S variants
BananaPi M2S ships in two variants with Amlogic S922X or A311D chips.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230305134512.1596572-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:37:25 +01:00
Neil Armstrong
2227e738b3 dt-bindings: soc: amlogic: convert clk-measure.txt to dt-schema
Convert the Amlogic Internal Clock Measurer bindings to dt-schema.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230209-b4-amlogic-bindings-convert-take2-v1-2-c4fe9049def9@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:48 +01:00
Neil Armstrong
739e93e254 arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node
Fixes the following bindings check error:
phy@78000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-8-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
4bddf79acd arm64: dts: amlogic: meson-sm1: use correct enable-gpios
Replace enable-gpio by enable-gpios to match the bindings.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
d1e336eef1 arm64: dts: amlogic: meson-s4: fix apb4 bus node name
Fixes the following bindings check error:
apb4@fe000000: $nodename:0: 'apb4@fe000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-6-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
50e7d71214 arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node
Fixes the following bindings check error:
pinctrl@40: keypad-gpio: {...} is not of type 'array'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-5-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
db217e84d0 arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names
Fixes the following bindings check error:
 - pwm@2000: clock-names: 'oneOf' conditional failed, one must be fixed:
	['clkin4'] is too short
	'clkin4' is not one of ['clkin0', 'clkin1']
	'clkin0' was expected
 - pwm@7000: clock-names: 'oneOf' conditional failed, one must be fixed:
	['clkin3'] is too short
	'clkin3' is not one of ['clkin0', 'clkin1']
	'clkin0' was expected
 - pwm@19000: clock-names: 'oneOf' conditional failed, one must be fixed:
	['clkin2'] is too short
	'clkin2' is not one of ['clkin0', 'clkin1']
	'clkin0' was expected

Fixes: d747e7f76a ("arm64: dts: meson: add support for Radxa Zero2")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-4-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
bd47319f99 arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node
Fixes the following bindings check errors:
 - #gpio-cells: [[1]] is not of type 'object'
 - 'gpio-controller' is a dependency of '#gpio-cells'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Vyacheslav Bocharov <adeep@lexina.in>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-3-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
d7ff22a6ec arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node
Fixes the following bindings check error:
fusb302@22: 'connector' is a required property

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-2-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Neil Armstrong
f88f3dcbb1 arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name
Fixes the following bindings check error:
usb-hub: $nodename:0: 'usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-bindings-fixups-v2-v1-1-93b7e50286e7@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-06 09:36:01 +01:00
Rongguang Wei
a9334b702a net: stmmac: add to set device wake up flag when stmmac init phy
When MAC is not support PMT, driver will check PHY's WoL capability
and set device wakeup capability in stmmac_init_phy(). We can enable
the WoL through ethtool, the driver would enable the device wake up
flag. Now the device_may_wakeup() return true.

But if there is a way which enable the PHY's WoL capability derectly,
like in BIOS. The driver would not know the enable thing and would not
set the device wake up flag. The phy_suspend may failed like this:

[   32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16
[   32.409065] PM: Device stmmac-1:00 failed to suspend: error -16
[   32.409067] PM: Some devices failed to suspend, or early wake event detected

Add to set the device wakeup enable flag according to the get_wol
function result in PHY can fix the error in this scene.

v2: add a Fixes tag.

Fixes: 1d8e5b0f3f ("net: stmmac: Support WOL with phy")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06 07:36:20 +00:00
Jingyu Wang
8c3223a50f x86/entry: Change stale function name in comment to error_return()
Correct old function name error_exit() in the comment to what it is now
called: error_return().

  [ bp: Provide a commit message and massage. ]

Signed-off-by: Jingyu Wang <jingyuwang_vip@163.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20220618154238.27749-1-jingyuwang_vip@163.com
2023-03-06 08:04:03 +01:00
Greg Kroah-Hartman
ec738ca127 mtd: spi-nor: fix memory leak when using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To solve this, remove the
lookup and create the directory on the first device found, and then
remove it when the module is unloaded.

Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230208160230.2179905-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-06 07:52:03 +01:00
Greg Kroah-Hartman
721da5cee9 driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2
CONFIG_SYSFS_DEPRECATED was added in commit 88a22c985e
("CONFIG_SYSFS_DEPRECATED") in 2006 to allow systems with older versions
of some tools (i.e. Fedora 3's version of udev) to boot properly.  Four
years later, in 2010, the option was attempted to be removed as most of
userspace should have been fixed up properly by then, but some kernel
developers clung to those old systems and refused to update, so we added
CONFIG_SYSFS_DEPRECATED_V2 in commit e52eec13cd ("SYSFS: Allow boot
time switching between deprecated and modern sysfs layout") to allow
them to continue to boot properly, and we allowed a boot time parameter
to be used to switch back to the old format if needed.

Over time, the logic that was covered under these config options was
slowly removed from individual driver subsystems successfully, removed,
and the only thing that is now left in the kernel are some changes in
the block layer's representation in sysfs where real directories are
used instead of symlinks like normal.

Because the original changes were done to userspace tools in 2006, and
all distros that use those tools are long end-of-life, and older
non-udev-based systems do not care about the block layer's sysfs
representation, it is time to finally remove this old logic and the
config entries from the kernel.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20230223073326.2073220-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-06 07:46:23 +01:00
Gustavo A. R. Silva
97ab4c116a ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new __DECLARE_FLEX_ARRAY()
helper macro.

This helper allows for flexible-array members in unions.

Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/227
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2023-03-05 23:41:25 -06:00
Clark Wang
300bd129f9 firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domains
LVDS' lpi2c and pwm power domains definitions are missed.
Add them here.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 11:12:36 +08:00
Michael Walle
916508c30e Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
With commit b203e6f1e8 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.

Fixes: b203e6f1e8 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 11:09:06 +08:00
Rob Herring
2a88e4792c bus: imx-weim: Remove open coded "ranges" parsing
"ranges" is a standard property and we have common helper functions for
parsing it, so let's use them.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 11:02:16 +08:00
Alexander Stein
fd4334a06d arm64: dts: freescale: imx8-ss-lsio: Fix flexspi clock order
The correct clock order is "fspi_en" and "fspi". As they are identical
just reordering the names is sufficient.

Fixes: 6276d66984 ("arm64: dts: imx8dxl: add flexspi0 support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:18:02 +08:00
Alexander Stein
189cfa849d firmware: imx: scu: use dev_err_probe
This simplifies the code and silences -517 error messages. Also
the reason is listed in /sys/kernel/debug/devices_deferred.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:10:24 +08:00
Oleksij Rempel
37c24ed660 ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Without this patch we have relatively high amount of dropped packets.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:47 +08:00
Oleksij Rempel
8940c10527 ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
IMX6UL_CLK_ENETx_REF is behind of CLK_ENETx_REF_SEL:

FEC MAC <---------- CLK_ENETx_REF_SEL <--------- CLK_ENETx_REF
		       \
		        ^------<-> CLK_ENETx_REF_PAD

We should point to the clock selector instead. So, we will be able to
use external clock source from CLK_ENETx_REF_PAD as well.

At same time, remove enet_out clk. It is using always the same clock as
enet_clk_ref and do not help to solve any challenges of this HW.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
088e350d2b ARM: dts: imx6dl-eckelmann-ci4x10: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
c89614079e ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
c812c91bda ARM: dts: imx6q-prtwd2: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
2c23a919d6 ARM: dts: imx6dl-victgo: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
03c8a3c719 ARM: dts: imx6dl-prtmvt: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
887185649c ARM: dts: imx6dl-plym2m: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
5417c655b9 ARM: dts: imx6dl-plybas: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
aad004c138 ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:46 +08:00
Oleksij Rempel
d289654fd6 ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parent
On this board the PHY is the ref clock provider. So, configure ethernet
reference clock as input.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:45 +08:00
Oleksij Rempel
006ab3142f ARM: dts: imx6qdl: use enet_clk_ref instead of enet_out for the FEC node
Old imx6q machine code makes RGMII/RMII clock direction decision based on
configuration of "ptp" clock. "enet_out" is not used and make no real
sense, since we can't configure it as output or use it as clock
provider.

Instead of "enet_out" use "enet_clk_ref" which is actual selector to
choose between internal and external clock source:

FEC MAC <---------- enet_clk_ref <--------- SoC PLL
                         \
			  ^------<-> refclock PAD (bi directional)

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:45 +08:00
Michael Tretter
4a25aa8a30 ARM: dts: imx7d: add node for PXP
The i.MX7d contains a Pixel Pipeline in version 3.0. Add the device tree
node to make it available.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 10:01:28 +08:00
Oleksij Rempel
e87f3be1c7 ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite
Ethernet refclock direction is board specific and should be configurable
by devicetree. In fact there are board not working with this defaults,
which will be fixed by separate patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 09:59:19 +08:00
Oleksij Rempel
5e16360a01 ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present
Current mach-imx6q code has following logic:
- if ptp clock of the ethernet controller node is attached to the SoC
  internal enet_ref clock, then we configure RMII reference clock pin as
  output by setting IOMUXC_GPR1 BIT(21).
  In this case - MAC (SoC) is the clock provider, PHY is the clock consumer.
- if ptp clock of the ethernet controller node is not attached to the
  enet_ref clock, then we configure RMII reference clock pin as input by
  clearing IOMUXC_GPR1 BIT(21).
  In this case - PHY is the clock provider, MAC is the clock consumer.

According to the Freescale MX6SDL ReferenceManual v4, IOMUXC_GPR1 BIT(21)
(page 2033) this configuration bit is not related to the PTP (IEEE1588)
clock:
21 ENET_CLK_SEL - choose enet reference clk mode:
   0 - get enet tx reference clk from pad (external OSC for both external
       PHY and Internal Controller)
   1 - get enet tx reference clk from internal clock from anatop (loopback
       through pad), this clock also sent out to external PHY.

According to the Documentation/devicetree/bindings/net/fsl,fec.yaml:
      The "ptp"(option), for IEEE1588 timer clock that requires the clock.
      The "enet_clk_ref"(option), for MAC transmit/receiver reference clock
      like RGMII TXC clock or RMII reference clock. It depends on board
      design, the clock is required if RGMII TXC and RMII reference clock
      source from SOC internal PLL.
      The "enet_out"(option), output clock for external device, like supply
      clock for PHY. The clock is required if PHY clock source from SOC.

We can see, that "enet_clk_ref" clock is the best fit for this purpose.
Other properties like "ptp" is designed for IEEE1588 and "enet_out" do
not have real functionality within imx related clock infrastructure.

Since the "enet_clk_ref" is not used by the imx6qdl devicetrees, we can
use it as indicator of potentially properly configured DT. At same time
we can keep ptp clock based logic as the fallback for old DTs.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-06 09:57:02 +08:00
Al Viro
0aaf08de84 __blockdev_direct_IO(): get rid of submit_io callback
always NULL...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-05 20:27:41 -05:00
Al Viro
eb2317b13b nios2: _TIF_ALLWORK_MASK is unused
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-05 20:21:04 -05:00
Zev Weiss
9dedb72444 ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks
While I'm not aware of any problems that have occurred running these
at 100 MHz, the official word from ASRock is that 50 MHz is the
correct speed to use, so let's be safe and use that instead.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org
Fixes: 2b81613ce4 ("ARM: dts: aspeed: Add ASRock E3C246D4I BMC")
Fixes: a9a3d60b93 ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-4-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-06 11:23:18 +10:30
Zev Weiss
8bc5ae1d2b ARM: dts: aspeed: e3c246d4i: Add PECI device
Now that we've got driver support for it, we might as well enable and
use it.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20230224000400.12226-3-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-06 11:23:17 +10:30
Zev Weiss
a3fd10732d ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED
Turns out it's in fact not the same as the heartbeat LED.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org # v5.18+
Fixes: a9a3d60b93 ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-03-06 11:23:17 +10:30
Zhang Xiaoxu
d0dc411199 cifs: Move the in_send statistic to __smb_send_rqst()
When send SMB_COM_NT_CANCEL and RFC1002_SESSION_REQUEST, the
in_send statistic was lost.

Let's move the in_send statistic to the send function to avoid
this scenario.

Fixes: 7ee1af765d ("[CIFS]")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-03-05 17:50:38 -06:00
Christophe JAILLET
ae2ade4ba5
spi: Reorder fields in 'struct spi_message'
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size from 112 to 96 bytes.

This should have no real impact on memory allocation because 'struct
spi_message' is mostly used on stack, but it can save a few cycles
when the structure is initialized with spi_message_init() and co.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/c112aad16eb47808e1ec10abd87b3d273c969a68.1677704283.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:41:29 +00:00
Lizhe
8c220e6c6d
drivers/spi-rockchip.c : Remove redundant variable slave
variable slave in spi_alloc_master() or spi_alloc_slave()
has been assigned. it is not necessary to be assigned again

Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20230226063334.7489-1-sensor1010@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:41:28 +00:00
Lizhe
d447fa6564
drivers/spi-rockchip.c : Use devm_platform_get_and_ioremap_resource makes code better
use devm_platform_get_and_ioremap replace platform_get_resource()
and devm_ioremap_resource()

Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20230226065125.14086-1-sensor1010@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:41:26 +00:00
Jiapeng Chong
f58ab0fa7a
spi/bcm63xx: Remove the unused function bcm_spi_readw()
The function bcm_spi_readw is defined in the spi-bcm63xx.c file, but
not called elsewhere, so remove this unused function.

drivers/spi/spi-bcm63xx.c:160:19: warning: unused function 'bcm_spi_readw'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4242
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228023243.118429-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:41:26 +00:00
Geert Uytterhoeven
fc12d4bb32
spi: Replace spi_pcpu_stats_totalize() macro by a C function
spi_pcpu_stats_totalize() is a rather large macro, and is instantiated
28 times, causing a large amount of duplication in the amount of
generated code.

Reduce the duplication by replacing spi_pcpu_stats_totalize() by a real
C function, and absorb all other common code from
spi_statistics_##name##_show().  As (a) the old "field" parameter was
the name of a structure member, which cannot be passed to a function,
and (b) passing a pointer to the member is also not an option, due to
the loop over all possible CPUs, the "field" parameter is replaced by an
"offset" parameter, pointing to a location within the structure.

This reduces kernel size by ca. 4 KiB (on arm32 and arm64).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/cb7690d9d04c06eec23dbb98fbb5444082125cff.1677594432.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:41:25 +00:00
Mark Brown
ada850541a
spi: qcom-qspi: Make available for build test
There is no build time dependency on the Qualcomm platform support so add
an || COMPILE_TEST so we've got better build coverage of the driver.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-spi-arch-deps-v1-6-83d1566474cf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:39:11 +00:00
Mark Brown
f916c7080d
spi: fsi: Make available for build test
There is no build time dependency on the platform support so add an
|| COMPILE_TEST so we've got better build coverage of the driver.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-spi-arch-deps-v1-5-83d1566474cf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:39:10 +00:00
Mark Brown
e48d57d720
spi: davinci: Make available for build test
There is no build time dependency on the DaVicni or Keystone architecture
support so add an || COMPILE_TEST so we've got better build coverage of the
driver.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-spi-arch-deps-v1-4-83d1566474cf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:39:09 +00:00
Mark Brown
c6b15b2437
spi: nxp-flexspi: Fix ARCH_LAYERSCAPE dependency
Currently the NXP Flex SPI driver has a dependency on ARCH_LAYERSCAPE ||
HAS_IOMEM which means that the dependency is almost always true and the
driver available. Really these should be two separate dependencies, with
an || COMPILE_TEST dependency for the architecture to ensure build coverage
is maintained.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-spi-arch-deps-v1-3-83d1566474cf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-05 23:39:08 +00:00