If base support for Rockchip SoCs has been disabled then the SPI driver
won't be terribly useful, add a dependency on ARCH_ROCKCHIP || COMPILE_TEST
to avoid it appearing when not needed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-spi-arch-deps-v1-2-83d1566474cf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The mpc52xx-psc and mpc512x-psc drivers use DT property parsing
functions for 'reg' and 'interrupts', but those are available as
platform device resources. Convert probe functions to use them and
simplify probe to a single function. For 'cell-index', also use the
preferred typed property function.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230217-dt-mpc5xxx-spi-v1-3-3be8602fce1e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the mpc52xx-psc and mpc512x-psc drivers to use the managed
devres variants of functions in probe. Also use dev_err_probe() as
appropriate. With this, the error handling can be simplified.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230217-dt-mpc5xxx-spi-v1-2-3be8602fce1e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add QSPI reset operation in device probe and add RISCV support to
QUAD SPI Kconfig.
Co-developed-by: Ziv Xu <ziv.xu@starfivetech.com>
Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Link: https://lore.kernel.org/r/20230302105221.197421-3-william.qiu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The QSPI controller needs three reset items to work properly on JH7110 SoC,
so there is need to change the maxItems's value to 3 and add minItems
whose value is equal to 2. Other platforms do not have this constraint.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Link: https://lore.kernel.org/r/20230302105221.197421-2-william.qiu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5739 is a step-down switching voltage regulator that supports
output voltage ragne from 300mV to 1300mV with the wide input supply
voltage range from 2.5V to 5.5V.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1676599618-24819-3-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems that a couple of members got lost theirorder, put them back.
Besides that, split field descriptions into groups in the same way
as it's done in the structure definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230220153334.87049-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices lack status registers, yet expect to handle interrupts.
Introduce a no_status flag to indicate such a configuration, where
rather than read a status register to verify, all interrupts received
are assumed to be active.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/bd501b4b5ff88da24d467f75e8c71b4e0e6f21e2.1677515341.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SoundWire devices have larger width device specific register
maps, in addition to the standard SoundWire 8-bit map. Update the
helpers to allow accessing arbitrarily sized register values and remove
the explicit 8-bit restriction from regmap_sdw_config_check.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230112171840.2098463-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the regmap config reg_bits represents the number of address bits not
the number of value bits. Correct the misleading comment which looks a
lot like it suggests the register value itself is 32-bits wide.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230112171840.2098463-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Qualcomm WCD9335 audio codec binding to DT schema.
Changes against original binding:
1. Drop "mclk2" from clocks as neither Linux driver nor DTS uses it.
2. Do not require vdd-micbias-supply as several DTS do not provide it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230220095643.64898-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference common DAI properties to get sound-dai-cells description and
allow name-prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230220095643.64898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This feature is required for coupled hp-mic quirk used
by some Nvidia Tegra 3 based devices work properly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230221183211.21964-3-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members, instead.
Use the DECLARE_FLEX_ARRAY() helper macro to transform zero-length
arrays in unions with flexible-array members.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/soc/sof/ipc4-control.c:176:77: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:78:29: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:80:33: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:95:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:96:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:93:53: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:140:58: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:141:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:142:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1475:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1476:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/258
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Y/gyIg1qZduhigPi@work
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is support dynamic range compression controls.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Seven Lee <scott6986@gmail.com>
Link: https://lore.kernel.org/r/20230217092523.357142-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Wolfson WM8524 24-bit 192KHz Stereo DAC device tree
binding documentation to json-schema.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230227091938.1671416-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Wolfson WM8960 audio codecs bindings to DT schema.
Changes against original binding:
1. Document clocks and clock-names - already present in DTS and used
by Linux driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230217150627.779764-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct avs_modcfg_ext structure has a flexible array member for the
pin_fmts array, and the size should be calculated using struct_size to
prevent the potential for overflow with the allocation.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: "Amadeusz Sławiński" <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230303180457.2457069-1-jacob.e.keller@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codrin is not with Microchip anymore. As I worked lately with Microchip
AT91 sound drivers add myself as maintainer for these.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230301113807.24036-8-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous debug message states that there was a failure and tx was not
disabled. Which is not true as the TX in this function could also be
enabled. Thus improve a bit the debug message by s/disable/start\/stop/.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230301113807.24036-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regmap_update_bits() instead of regmap_read(), running variable,
regmap_write(). There is no need for extra variables and checks around
it as regmap_update_bits() already does this. With this code becomes
simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230301113807.24036-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add basic support for the codecs' mclk.
Enable it on SND_SOC_BIAS_ON, disable it on SND_SOC_BIAS_OFF.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230302-max9867-v2-3-fd2036d5e825@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert from max9867.txt to maxim,max9867.yaml and add missing
'#sound-dai-cells' property.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230302-max9867-v2-1-fd2036d5e825@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI L1 should be enabled unconditionally after FW boot is complete.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The workaround to disable DMI L1 should be restricted to only the CAVS
IP's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a workaround in place to address a known issue with host DMA
running into xruns when capture streams are running. But when resuming
from Sx, we unconditionally re-enable DMI L1 without taking the
workaround into account and this could lead to xruns when a suspended
capture stream is restarted.
To fix this rename the flag l1_support_enabled to l1_disabled in struct
sof_intel_hda_dev to save the L1 disabled status which can be
set/cleared when we get/put a stream and use the flag to determine if DMI
L1 should enabled or not during the post_fw_run op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add prefixes 8821/35l41 in structs and function names so future platforms
can be added and reference the correct sound card.
Also include acp5x prefix to cs35l41_conf.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230217110850.1045250-10-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace occurrences of strings by their definition, avoiding
bugs where the string changed, but not all places have been modified.
While at it rename defines to use NAU8821 codec name instead of NUVOTON
and align with the other defines.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230217110850.1045250-9-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To iterate over components use for_each_rtd_components
And compare to component name, so asoc_rtd_to_codec and the dai code can
be removed
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230217110850.1045250-6-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sizeof(*machine) instead of sizeof(struct acp5x_platform_info)
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230217110850.1045250-4-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Small refactor of the code:
- sort includes in alphabetical order
- sort variables declarations by line length
- remove unnecessary "struct snd_soc_card *card" lines
- insert blank lines before return
- break/unbreak some lines for better read
- align defines
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230217110850.1045250-3-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After contributing the component, add myself as the maintainer
for the Freescale QMC audio ASoC component.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-11-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The QMC audio is an ASoC component which provides DAIs
that use the QMC (QUICC Multichannel Controller) to transfer
the audio data.
It provides as many DAIs as the number of QMC channels it
references.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-10-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The QMC (QUICC mutichannel controller) is a controller
present in some PowerQUICC SoC such as MPC885.
The QMC audio is an ASoC component that uses the QMC
controller to transfer the audio data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After contributing the driver, add myself as the maintainer
for the Freescale QMC controller.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The QMC (QUICC Multichannel Controller) emulates up to 64
channels within one serial controller using the same TDM
physical interface routed from the TSA.
It is available in some PowerQUICC SoC such as the
MPC885 or MPC866.
It is also available on some Quicc Engine SoCs.
This current version support CPM1 SoCs only and some
enhancement are needed to support Quicc Engine SoCs.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230217145645.1768659-7-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>