Factor out the first half of the finalise_el2 function into a macro to
allow its reuse from the nVHE PSCI relay code. While at it, make the
register allocation parametric for the check_override macros as they are
now more widely exposed.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-3-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We will need a sanitized copy of SYS_ID_AA64SMFR0_EL1 from the nVHE EL2
code shortly, so make sure to provide it with a copy.
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-2-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We should update age extent in f2fs_do_zero_range() like we
did in f2fs_truncate_data_blocks_range().
Fixes: 71644dff48 ("f2fs: add block_age-based extent cache")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nr_free may be less than len, we should update age extent cache
w/ range [fofs, len] rather than [fofs, nr_free].
Fixes: 71644dff48 ("f2fs: add block_age-based extent cache")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the storage gives a corrupted node block due to short power failure and
reset, f2fs stops the entire operations by setting the checkpoint failure flag.
Let's give more chances to live by re-issuing IOs for a while in such critical
path.
Cc: stable@vger.kernel.org
Suggested-by: Randall Huang <huangrandall@google.com>
Suggested-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
.i_compress_level was introduced by commit 3fde13f817 ("f2fs: compress:
support compress level"), but never be used.
This patch updates as below:
- load high 8-bits of on-disk .i_compress_flag to in-memory .i_compress_level
- load low 8-bits of on-disk .i_compress_flag to in-memory .i_compress_flag
- change type of in-memory .i_compress_flag from unsigned short to unsigned
char.
w/ above changes, we can avoid unneeded bit shift whenever during
.init_compress_ctx(), and shrink size of struct f2fs_inode_info.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to use bitfield in struct f2fs_io_info to improve
memory usage.
struct f2fs_io_info {
...
unsigned int need_lock:8; /* indicate we need to lock cp_rwsem */
unsigned int version:8; /* version of the node */
unsigned int submitted:1; /* indicate IO submission */
unsigned int in_list:1; /* indicate fio is in io_list */
unsigned int is_por:1; /* indicate IO is from recovery or not */
unsigned int retry:1; /* need to reallocate block address */
unsigned int encrypted:1; /* indicate file is encrypted */
unsigned int post_read:1; /* require post read */
...
};
After this patch, size of struct f2fs_io_info reduces from 136 to 120.
[Nathan: fix a compile warning (single-bit-bitfield-constant-conversion)]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Factor the logic to log a path for reads and writs into a helper
shared between the read_iter and write_iter methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just open code the logic in the only caller, where it is more
obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove __refresh_next_blkoff by opencoding the SSR vs LFS segment check
in the only caller, and then add helpers for SSR block selection and
blkoff randomization instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just fold this trivial wrapper into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Simplify the check whether to allocate a new segment or reuse an open
one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a helper to return the valid blocks on log and SSR segments, and
replace the last two uses of curseg_blkoff with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For each loop add a local curseg_info pointer insted of looking it up
for each of the three fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This I2C module is integrated into the Loongson-2K SoCs and Loongson
LS7A bridge chip.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add Loongson LS2X I2C controller binding with DT schema format using
json-schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84 ("tracing/ring-buffer: Have
polling block on watermark").
This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().
This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.
As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This KUnit fixes update for Linux 6.2-rc7 consists of 3 fixes to bugs
that cause kernel crash, link error during build, and a third to fix
kunit_test_init_section_suites() extra indirection issue.
-----BEGIN PGP SIGNATURE-----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=XZGm
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to bugs that cause kernel crash, link error during build,
and a third to fix kunit_test_init_section_suites() extra indirection
issue"
* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kunit_test_init_section_suites(...)
kunit: fix bug in KUNIT_EXPECT_MEMEQ
kunit: Export kunit_running()
The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board. The reason that
i.MX always shows up here is obviously not that they are more buggy than
the others, but they have the most boards and are good about getting
fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner "rsb" bus driver.
-----BEGIN PGP SIGNATURE-----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=xaPs
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. Reason is that a pointer to a
string is passed to an inline assembly; this string however is located on
the stack, while the instruction within the inline assembly expects a
physicial address. Fix this by copying the string to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses memory
from an inline assembly, which it does. Add "memory" to the clobber list
to prevent the compiler from optimizing code incorrectly away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2
("zstd: import usptream v1.5.2").
-----BEGIN PGP SIGNATURE-----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=+HFX
-----END PGP SIGNATURE-----
Merge tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
A set of AMD PMF fixes + a few other small fixes.
The following is an automated git shortlog grouped by driver:
platform/x86/amd:
- pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf:
- Ensure mutexes are initialized before use
- Fix to update SPS thermals when power supply change
- Fix to update SPS default pprof thermals
- update to auto-mode limits only after AMT event
- Add helper routine to check pprof is balanced
- Add helper routine to update SPS thermals
thinkpad_acpi:
- Fix thinklight LED brightness returning 255
touchscreen_dmi:
- Add Chuwi Vi8 (CWI501) DMI match
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPbkkYUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z+0Qf+P1D0gJLX7iBkKf18k+Y6kMmIz+V/
LpfHX1VZOQcDtFXqvh95Gp6t3MtsSk6YvwC2VFfsa5u3dqif0NBp80R0sv1gZYn2
w/qpcRSnnci/mXcN0xyq5hzcoZ/BmpriMF1/1OdNIWpdsRt0C3FKfDhrob5iRTDy
XMz+7TtfTwNKp6DtzNF2t5mgLuGedBYZvbET4wt7FVhJADo8y+2ItswPBdHrd5zs
THQ3PV4QR9rSD+ueB3gt9t52DAUyjehw6rG3QL1JqbeNyuQtfqyG6xqmdo0XiOj2
mjoYLy6tNWSTw1yrm6LkPFPFcSXoTkrr2XveBsmiRb0zr4BFBDZtM54meQ==
=bZ/h
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of AMD PMF fixes + a few other small fixes"
* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
platform/x86/amd: pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf: Ensure mutexes are initialized before use
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
platform/x86/amd/pmf: Add helper routine to update SPS thermals
Create a new pmu_metric for the metric related variables from pmu_event
but that is initially just a clone of pmu_event. Add iterators for
pmu_metric and use in places that metrics are desired rather than
events. Make the event iterator skip metric only events, and the metric
iterator skip event only events.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rewrite metrics within the same file in terms of each other. For example, on Power8
other_stall_cpi is rewritten from:
"PM_CMPLU_STALL / PM_RUN_INST_CMPL - PM_CMPLU_STALL_BRU_CRU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_FXU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_VSU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_LSU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_NTCG_FLUSH / PM_RUN_INST_CMPL - PM_CMPLU_STALL_NO_NTF / PM_RUN_INST_CMPL"
to:
"stall_cpi - bru_cru_stall_cpi - fxu_stall_cpi - vsu_stall_cpi - lsu_stall_cpi - ntcg_flush_cpi - no_ntf_stall_cpi"
Which more closely matches the definition on Power9.
To avoid recomputation decorate the function with a cache.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add RewriteMetricsInTermsOfOthers that iterates over pairs of names and
expressions trying to replace an expression, within the current
expression, with its name.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
rhs may not be defined, say for source_count, so add a guard.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show the branch speculation info if provided by the branch recording
hardware feature. This can be useful for optimizing code further.
The speculation info is appended to the end of the list of fields so any
existing tools that use "/" as a delimiter for access fields via an index
remain unaffected. Also show "-" instead of "N/A" when speculation info
is unavailable because "/" is used as the field separator.
E.g.
$ perf record -j any,u,save_type ./test_branch
$ perf script --fields brstacksym
Before:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL
[...]
After:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
[...]
The bitfield swapping scheme used duing sample parsing has changed
because of the addition of new branch flags, namely "spec", "new_type"
and "priv". Earlier, these were all part of the "reserved" field but
now, each of these fields get swapped separately. Change the expected
flag values accordingly for the test to pass.
E.g.
$ perf test -v 27
Before:
27: Sample parsing :
--- start ---
test child forked, pid 61979
parsing failed for sample_type 0x800
test child finished with -1
---- end ----
Sample parsing: FAILED!
After:
27: Sample parsing :
--- start ---
test child forked, pid 63293
test child finished with 0
---- end ----
Sample parsing: Ok
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/56e272583552526e999ba0b536ac009ae3613966.1675333809.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a list_del corruption when remove the jffs2 module:
list_del corruption, ffffffffa0623e60->next is NULL
WARNING: CPU: 6 PID: 6332 at lib/list_debug.c:49 __list_del_entry_valid+0x98/0x130
Modules linked in: jffs2(-) ]
CPU: 6 PID: 6332 Comm: rmmod Tainted: G W 6.1.0-rc2+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:__list_del_entry_valid+0x98/0x130
...
Call Trace:
<TASK>
jffs2_unregister_compressor+0x3e/0xe0 [jffs2]
jffs2_zlib_exit+0x11/0x30 [jffs2]
jffs2_compressors_exit+0x1e/0x30 [jffs2]
exit_jffs2_fs+0x16/0x44f [jffs2]
__do_sys_delete_module.constprop.0+0x244/0x370
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
If one of the compressor initialize failed, the module always insert
success since jffs2_compressors_init() always return success, then
something bad may happen during remove the module.
For this scenario, let's insmod failed.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The initialized compressors should be released if one of them
initialize fail, this is the pre-patch for fix the problem, use
function instead of the macro in jffs2_compressors_init() to
simplify the codes, no functional change intended.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix function name in fs/ubifs/io.c kernel-doc comment
to remove some warnings found by clang(make W=1 LLVM=1).
fs/ubifs/io.c:497: warning: expecting prototype for
wbuf_timer_callback(). Prototype was for wbuf_timer_callback_nolock()
instead
fs/ubifs/io.c:513: warning: expecting prototype for new_wbuf_timer().
Prototype was for new_wbuf_timer_nolock() instead
fs/ubifs/io.c:538: warning: expecting prototype for cancel_wbuf_timer().
Prototype was for cancel_wbuf_timer_nolock() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/ubifs/journal.c:1221: warning: Function parameter or member
'old_inode' not described in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Function parameter or member 'old_nm'
not described in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Function parameter or member
'new_inode' not described in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Function parameter or member 'new_nm'
not described in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Function parameter or member
'whiteout' not described in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Excess function parameter 'old_dentry'
description in 'ubifs_jnl_rename'
fs/ubifs/journal.c:1221: warning: Excess function parameter 'new_dentry'
description in 'ubifs_jnl_rename'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Following process will trigger an infinite loop in ubi_wl_put_peb():
ubifs_bgt ubi_bgt
ubifs_leb_unmap
ubi_leb_unmap
ubi_eba_unmap_leb
ubi_wl_put_peb wear_leveling_worker
e1 = rb_entry(rb_first(&ubi->used)
e2 = get_peb_for_wl(ubi)
ubi_io_read_vid_hdr // return err (flash fault)
out_error:
ubi->move_from = ubi->move_to = NULL
wl_entry_destroy(ubi, e1)
ubi->lookuptbl[e->pnum] = NULL
retry:
e = ubi->lookuptbl[pnum]; // return NULL
if (e == ubi->move_from) { // NULL == NULL gets true
goto retry; // infinite loop !!!
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link].
Fixes: 43f9b25a9c ("UBI: bugfix: protect from volume removal")
Fixes: ee59ba8b06 ("UBI: Fix stale pointers in ubi->lookuptbl")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216111
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Wear-leveling entry could be freed in error path, which may be accessed
again in eraseblk_count_seq_show(), for example:
__erase_worker eraseblk_count_seq_show
wl = ubi->lookuptbl[*block_number]
if (wl)
wl_entry_destroy
ubi->lookuptbl[e->pnum] = NULL
kmem_cache_free(ubi_wl_entry_slab, e)
erase_count = wl->ec // UAF!
Wear-leveling entry updating/accessing in ubi->lookuptbl should be
protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize
wl entry accessing between wl_entry_destroy() and
eraseblk_count_seq_show().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216305
Fixes: 7bccd12d27 ("ubi: Add debugfs file for tracking PEB state")
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
After disabling fastmap(ubi->fm_disabled = 1), fastmap won't be updated,
fm_anchor PEB is missed being scheduled for erasing. Besides, fm_anchor
PEB may have smallest erase count, it doesn't participate wear-leveling.
The difference of erase count between fm_anchor PEB and other PEBs will
be larger and larger later on.
In which situation fastmap can be disabled? Initially, we have an UBI
image with fastmap. Then the image will be atttached without module
parameter 'fm_autoconvert', ubi turns to full scanning mode in one
random attaching process(eg. bad fastmap caused by powercut), ubi
fastmap is disabled since then.
Fix it by not getting fm_anchor if fastmap is disabled in
ubi_refill_pools().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216341
Fixes: 4b68bf9a69 ("ubi: Select fastmap anchor PEBs considering ...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
The normal process cannot go to ubifs_releasepage() which means there
exists pages being private but not dirty. Reproducer[1] shows that it
could occur (which maybe related to [2]) with following process:
PA PB PC
lock(page)[PA]
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
write_cache_pages[PA]
lock(page)
clear_page_dirty_for_io(page) // clear Dirty
ubifs_writepage
do_truncation[PB]
truncate_setsize
i_size_write(inode, newsize) // newsize = 0
i_size = i_size_read(inode) // i_size = 0
end_index = i_size >> PAGE_SHIFT
if (page->index > end_index)
goto out // jump
out:
unlock(page) // Private, Not Dirty
generic_fadvise[PC]
lock(page)
invalidate_inode_page
try_to_release_page
ubifs_releasepage
ubifs_assert(c, 0)
// bad assertion!
unlock(page)
truncate_pagecache[PB]
Then we may get following assertion failed:
UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]:
UBIFS assert failed: 0, in fs/ubifs/file.c:1513
UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]:
switched to read-only mode, error -22
CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308
Call Trace:
dump_stack+0x13/0x1b
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_releasepage+0x67/0x1d0 [ubifs]
try_to_release_page+0x57/0xe0
invalidate_inode_page+0xfb/0x130
__invalidate_mapping_pages+0xb9/0x280
invalidate_mapping_pagevec+0x12/0x20
generic_fadvise+0x303/0x3c0
ksys_fadvise64_64+0x4c/0xb0
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215373
[2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
There is a third possibility which maybe related to [1] that page is
private but not dirty caused by following process:
PA
lock(page)
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
write_cache_pages
lock(page)
clear_page_dirty_for_io(page) // clear Dirty
ubifs_writepage
write_inode
// fail, goto out, following codes are not executed
// do_writepage
// set_page_writeback // set Writeback
// detach_page_private // clear Private
// end_page_writeback // clear Writeback
out:
unlock(page) // Private, Not Dirty
PB
ksys_fadvise64_64
generic_fadvise
invalidate_inode_page
// page is neither Dirty nor Writeback
invalidate_complete_page
// page_has_private is true
try_to_release_page
ubifs_releasepage
ubifs_assert(c, 0) !!!
Then we may get following assertion failed:
UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]:
UBIFS assert failed: 0, in fs/ubifs/file.c:1499
UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]:
switched to read-only mode, error -22
CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty
Call Trace:
dump_stack+0x13/0x1b
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_releasepage+0x7e/0x1e0 [ubifs]
try_to_release_page+0x57/0xe0
invalidate_inode_page+0xfb/0x130
invalidate_mapping_pagevec+0x12/0x20
generic_fadvise+0x303/0x3c0
vfs_fadvise+0x35/0x40
ksys_fadvise64_64+0x4c/0xb0
Jump [2] to find a reproducer.
[1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty
[2] https://bugzilla.kernel.org/show_bug.cgi?id=215357
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fix it by adding copied znode back to tnc, then it will be freed
by ubifs_destroy_tnc_subtree() while closing tnc.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Dirty znodes will be written on flash in committing process with
following states:
process A | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
layout_commit | DIRTY_ZNODE | COW_ZNODE
fill_gap | 0
write master | 0 or OBSOLETE_ZNODE
process B | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE[1]
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
ubifs_tnc_end_commit | DIRTY_ZNODE | COW_ZNODE
write_index | 0
write master | 0 or OBSOLETE_ZNODE[2] or
| DIRTY_ZNODE[3]
[1] znode is dirtied without concurrent committing process
[2] znode is copied up (re-dirtied by other process) before cleaned
up in committing process
[3] znode is re-dirtied after cleaned up in committing process
Currently, the clean znode count is updated in free_obsolete_znodes(),
which is called only in normal path. If do_commit failed, clean znode
count won't be updated, which triggers a failure ubifs assertion[4] in
ubifs_tnc_close():
ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n
[4] Commit 380347e9ca ("UBIFS: Add an assertion for clean_zn_cnt").
Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216704
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Some interface files in debugfs support the read method
dfs_file_read(), but their rwx permissions is shown as
unreadable.
In the user mode, the following problem can be clearly seen:
# ls -l /sys/kernel/debug/ubi/ubi0/
total 0
--w------- 1 root root 0 Oct 22 16:26 chk_fastmap
--w------- 1 root root 0 Oct 22 16:26 chk_gen
--w------- 1 root root 0 Oct 22 16:26 chk_io
-r-------- 1 root root 0 Oct 22 16:26 detailed_erase_block_info
--w------- 1 root root 0 Oct 22 16:26 tst_disable_bgt
--w------- 1 root root 0 Oct 22 16:26 tst_emulate_bitflips
--w------- 1 root root 0 Oct 22 16:26 tst_emulate_io_failures
--w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut
--w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_max
--w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_min
It shows that these files do not have read permission 'r',
but we can actually read their contents.
# echo 1 > /sys/kernel/debug/ubi/ubi0/chk_io
# cat /sys/kernel/debug/ubi/ubi0/chk_io
1
User's permission access is determined by capabilities.
Of course, the root user is not restricted from reading
these files.
When reading a debugfs file, the process is as follows:
ksys_read()
vfs_read()
if (file->f_op->read)
file->f_op->read()
full_proxy_open()
real_fops->read()
dfs_file_read() -- Read method of debugfs file.
else if (file->f_op->read_iter)
new_sync_read()
else
ret = -EINVAL -- Return -EINVAL if no read method.
This indicates that the debugfs file can be read as long as the read
method of the debugfs file is registered. This patch adds the read
permission display for file that support the read method.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path.
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Suggested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The UBI driver can use the IOCTL to disable the fastmap after the
mainline 669d204469 ("ubi: fastmap: Add fastmap control support
for 'UBI_IOCATT' ioctl"). To destroy the fastmap on a old image,
we need to reattach the device in user space.
However, if the UBI driver build in kernel and the UBI volume is
the root partition, the UBI device cannot be reattached in user
space. To disable fastmap in this case, the UBI must provide the
kernel cmdline parameters to disable fastmap during attach.
This patch add 'enable_fm' as 5th module init parameter of mtd=xx to
control fastmap enable or not. When the value is 0, fastmap will not
create and existed fastmap will destroyed for the given ubi device.
Default value is 0.
To enable or disable fastmap during module loading, fm_autoconvert
must be set to non-zero.
+-----------------+---------------+---------------------------+
| \ | enable_fm=0 | enable_fm=1 |
+-----------------+---------------+---------------------------+
|fm_autoconvert=Y | disable fm | enable fm |
+---------------------------------+---------------------------+
|fm_autoconvert=N | disable fm | Enable fastmap if fastmap |
| | | exists on the old image |
+-------------------------------------------------------------+
Example:
# - Attach mtd1 to ubi1, disable fastmap, mtd2 to ubi2, enable
fastmap.
# modprobe ubi mtd=1,0,0,1,0 mtd=2,0,0,2,1 fm_autoconvert=1
# - If 5th parameter is not specified, the value is 0, fastmap is
disable
# modprobe ubi mtd=1 fm_autoconvert=1
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216623
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There is a memory leaks problem reported by kmemleak:
unreferenced object 0xffff888102007a00 (size 128):
comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s)
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi]
[<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi]
[<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi]
[<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170
[<ffffffff83c142a5>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.
Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl)
Fixes: 799dca34ac ("UBI: hide EBA internals")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
CPU: 2 PID: 4735 Comm: ubirsvol
Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
ubi_eba_copy_table+0x11f/0x1c0 [ubi]
ubi_resize_volume+0x4f9/0xbc0 [ubi]
ubi_cdev_ioctl+0x701/0x1850 [ubi]
__x64_sys_ioctl+0x11d/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing.
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
LEB 84: DATAHD free 122880 used 1920 dirty 2176 dark 6144
LEB 110:DELETION free 126976 used 0 dirty 0 dark 6144 (empty)
LEB 201:gc_lnum free 126976 used 0 dirty 0 dark 6144
LEB 272:GCHD free 77824 used 47672 dirty 1480 dark 6144
LEB 356:BASEHD free 0 used 39776 dirty 87200 dark 6144
OTHERS: index lebs, zero-available non-index lebs
UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.
To fix it, reserve one leb for each journal head while doing budget.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216562
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>