Use strchr() instead of strpbrk() when there is only 1 element in the set
of characters to look for.
This potentially saves a few cycles, but gcc does already account for
optimizing this pattern thanks to it's fold_builtin_strpbrk().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The expression 'indata[3] > ULONG_MAX' always evaluates to false since
indata[] is declared as an array of *unsigned long* elements and #define
ULONG_MAX represents the max value of that exact type...
Note that gcc seems to be able to detect the dead code here and eliminate
this check anyway...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
msm-next for v6.3
There is one devfreq patch, maintainer acked to land via msm-next to
avoid a build break on platforms that do not support PM_DEVFREQ. And
otherwise the usual assortment:
GPU:
- Add MSM_SUBMIT_BO_NO_IMPLICIT
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
- Include DSC blocks into register snapshot
- Misc HW catalog fixes
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
- Support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
- Fix the case of empty OPP tables (fixing db410c)
- DT schema rework and fixes
HDMI:
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
MDP5:
- Schema conversion to YAML
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv6zQ-zsgS+NG+WuV=tk51q9vA2QdKqYhNgiXQddAdZjA@mail.gmail.com
Update AMD memory encryption white-paper document link.
Previous link is not available. Update new available link.
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20230125175948.21100-1-wyes.karny@amd.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document the fact that CONFIG_BOOT_PRINTK_DELAY must be enabled for the
"boot_delay" kernel parameter to work. Also mention that "lpj=" may be
necessary.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230126225420.1320276-1-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cited commit in fixes tag frees rxq xdp info while RQ NAPI is
still enabled and packet processing may be ongoing.
Follow the mirror sequence of open() in the stop() callback.
This ensures that when rxq info is unregistered, no rx
packet processing is ongoing.
Fixes: 754b8a21a9 ("virtio_net: setup xdp_rxq_info")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20230202163516.12559-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel)
- clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- use workqueue dedicated to authentication (Shin'ichiro Kawasaki)
-----BEGIN PGP SIGNATURE-----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=Eivm
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2023-02-02' of git://git.infradead.org/nvme into block-6.2
Pul NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel)
- clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- use workqueue dedicated to authentication (Shin'ichiro Kawasaki)"
* tag 'nvme-6.2-2023-02-02' of git://git.infradead.org/nvme:
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
Add a new section to the admin-guide with information of interest to
application developers and system integrators doing analysis of the
Linux kernel for safety critical applications.
This section will contain documents supporting analysis of kernel
interactions with applications, and key kernel subsystems expectations.
Add a new workload-tracing document to this new section.
Signed-off-by: Shefali Sharma <sshefali021@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230131221105.39216-1-skhan@linuxfoundation.org
[jc: tweaked the sphinx formatting a bit]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Clang warns:
../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
mr |= SPDIFRX_MR_ENDIAN_BIG;
^~
../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
u32 mr;
^
= 0
1 error generated.
Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.
Fixes: fa09fa6038 ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The > comparison should be changed to >= to prevent an out of bounds
access into the mhi_cntrl->mhi_chan[] array. The mhi_cntrl->mhi_chan[]
array is allocated in mhi_ep_chan_init() and has mhi_cntrl->max_chan
elements.
Fixes: 6de4941c02 ("bus: mhi: ep: Check if the channel is supported by the controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/Y9JH5sudiZWvbODv@kili
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
It is enough to use a file name to cross-reference another rst document.
Jon says:
The right things will happen in the HTML output, readers of the
plain-text will know immediately where to go, and we don't have to add
the label clutter.
Drop reference markup and unnecessary labels and use plain file names.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230201094156.991542-4-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It is enough to use a file name to cross-reference another rst document.
Jon says:
The right things will happen in the HTML output, readers of the
plain-text will know immediately where to go, and we don't have to add
the label clutter.
Drop reference markup and unnecessary labels and use plain file names.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230201094156.991542-3-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jon says:
> +See also :ref:`Page Reclaim <page_reclaim>`.
Can also just be "See also Documentation/mm/page_reclaim.rst". The
right things will happen in the HTML output, readers of the plain-text
will know immediately where to go, and we don't have to add the label
clutter.
Remove reference markup and unnecessary labes and use plain file names.
Fixes: 5d8c5e430a ("docs/mm: Physical Memory: add structure, introduction and nodes description")
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230201094156.991542-2-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are different init functions for the sensors in this driver in
which only one initializes the generic vcnl4000_lock. With commit
e21b5b1f26 ("iio: light: vcnl4000: Preserve conf bits when toggle power")
the vcnl4040 sensor started to depend on the lock, but it was missed to
initialize it in vcnl4040's init function. This has not been visible
until we run lockdep on it:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
at kernel/locking/mutex.c:575 __mutex_lock+0x4f8/0x890
Call trace:
__mutex_lock
mutex_lock_nested
vcnl4200_set_power_state
vcnl4200_init
vcnl4000_probe
Fix this by initializing the lock in the probe function instead of doing
it in the chip specific init functions.
Fixes: e21b5b1f26 ("iio: light: vcnl4000: Preserve conf bits when toggle power")
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230131140109.2067577-1-marten.lindahl@axis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The include directives in all source files are reordered alphabetically
according to the names of the header files.
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-9-lukas.magel@posteo.net
[mkl: move header changes from Patch 3 here]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Previously, the CAN channel ID was printed to the kernel log in decimal
upon connecting a new PEAK device. This behavior is inconsistent with
the hexadecimal format of the CAN channel ID sysfs attribute. This patch
updates the log message to output the id in hexadecimal.
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-8-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch exports the CAN channel ID as a sysfs attribute. The CAN
channel ID is a user-configurable u8/u32 identifier that can be set
individually for each CAN interface of a PEAK USB device.
Exporting the channel ID as a sysfs attribute allows users to easily read
the ID and to write udev rules that can match against the ID. This is
especially useful for PEAK USB devices that do not export a serial
number at SUB level.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-7-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch introduces 3 new functions implementing support for ethtool
access to the CAN channel ID of all USB CAN network interfaces managed by
the driver. With this patch, it is possible to read/write the CAN
channel ID from/to the EEPROM via the ethtool interface.
The CAN channel ID is a user-configurable device identifier that can be
set individually for each CAN interface of a PEAK USB device. Depending on
the device, the identifier has a length of 8 or 32 bit. The identifier
is stored in the non-volatile memory of the device.
The identifier of a CAN interface can be read/written as an 8 or 32 bit
byte string in native (little-endian) byte order, where the length depends
on the device type.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-6-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch changes the call to unregister_netdev() in
peak_usb_disconnect() with unregister_candev().
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-5-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds callbacks that allow the user to set a new self-defined
CAN channel ID to all USB - CAN/CANFD interfaces of PEAK-System managed by
this driver, namely:
- PCAN-USB
- PCAN-USB FD
- PCAN-USB Pro FD
- PCAN-USB X6
- PCAN-Chip USB
- PCAN-USB Pro
The callback functions write the CAN channel ID to the non-volatile
memory of the devices.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-4-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds a new function that allows to read the CAN channel ID
from the non volatile memory of the USB CAN-FD PEAK devices. The CAN
channel ID is a user-configurable u8/u32 identifier value that can be set
individually for each PEAK CAN interface.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-3-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The so-called "device id" is a user-defined identifier value that can be
set individually for each CAN interface of a PEAK USB device.
Contrary to a static serial number, the value can be changed by the
user. With this ID, each CAN interface can be uniquely identified even if
the USB device does not export a proper serial number or the USB device
exports multiple CAN interfaces. In order to not confuse it with the
device ID used by the USB core and emphasize the link to the CAN
interface, the functions and variables for reading this user-defined
value are renamed to CAN channel ID.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-2-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The reset line from the Asix chip to the SJA1000 is asserted after boot up
until it is deasserted by a register write
Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Link: https://lore.kernel.org/all/20230120112616.6071-8-uttenthaler@ems-wuensche.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The latest GCC 13 snapshot (13.0.1 20230129) gives the following:
```
cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so
:./scripts/gcc-plugins/randomize_layout_plugin.so: undefined symbol: tree_code_type
```
This ends up being because of https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=b0241ce6e37031
upstream in GCC which changes the visibility of some types used by the kernel's
plugin infrastructure like tree_code_type.
After discussion with the GCC folks, we found that the kernel needs to be building
plugins with the same flags used to build GCC - and GCC defaults to gnu++17
right now. The minimum GCC version needed to build the kernel is GCC 5.1
and GCC 5.1 already defaults to gnu++14 anyway, so just drop the flag, as
all GCCs that could be used to build GCC already default to an acceptable
version which was >= the version we forced via flags until now.
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108634
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230201230009.2252783-1-sam@gentoo.org
Geert Uytterhoeven <geert+renesas@glider.be> says:
This patch series adds support for the CAN-FD interface on the Renesas
R-Car V4H (R8A779G0) SoC and support for CAN transceivers described as
PHYs to the R-Car CAN-FD driver. It includes several fixes for issues
(some minor) detected while adding the support and during testing.
More details can be found in the individual patches.
This has been tested on the Renesas White-Hawk development board using
cansend, candump, and canfdtest:
- Channel 0 uses an NXP TJR1443AT CAN transceiver, and works fine,
- Channels 1-7 use Microchip MCP2558FD-H/SN CAN transceivers (not
mounted for channels 4-7), which do not need explicit description.
While channel 1 works fine, channels 2-3 do not seem to work.
Hence despite the new fixes, the test results are similar to what Ulrich
Hecht reported for R-Car V3U on the Falcon development board before,
i.e. only channels 0 and 1 work (FTR, [2] does not help).
Whether this is a CAN-FD driver issue, a pin control issue, an IP core
issue, or an SoC integration issue is still to be seen...
[1] https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be
[2] commit e3e5bccc92446048 ("can: rcar_canfd:
rcar_canfd_configure_afl_rules(): Fix Rx FIFO entry setting") in
renesas-bsp/v5.10.147/rcar-5.2.0.rc3.
Link: https://lore.kernel.org/all/cover.1674499048.git.geert+renesas@glider.be
[mkl: applying patches 1...11 only]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On R-Car Gen4 CAN_FD variants, the Data Bit Rate Resynchronization Jump
Width Control (DSJW) field in the Channel n Data Bitrate Configuration
Register (DCFG) register is one bit wider than on older variants.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/c4e8bc220bf87e6c7e375f7a2ce51e2aa89ea8a7.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Despite the name, R-Car V3U (R8A779A0) was the first member of the R-Car
Gen4 family. Generalize the support for R-Car V3U to other SoCs in the
R-Car Gen4 family by adding a family-specific compatible value, and by
replacing all references to "V3U" by "Gen4".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/61f6f34eb7bcc62ff604add98f1bcd2d2584187d.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Abstract the different addresses for the Channel n Data Bitrate
Configuration Register (DCFG) in the definition of the register macro,
like is already done for other register definitions, to simplify code
accessing this register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/13e02d710dac3ddef73aa4be2b995766db9b6b4d.1674499048.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>