Commit graph

1,185,212 commits

Author SHA1 Message Date
Yishai Hadas
f4f0c25e5d vfio/mlx5: Improve the target side flow to reduce downtime
Improve the target side flow to reduce downtime as of below.

- Support reading an optional record which includes the expected
  stop_copy size.
- Once the source sends this record data, which expects to be sent as
  part of the pre_copy flow, prepare the data buffers that may be large
  enough to hold the final stop_copy data.

The above reduces the migration downtime as the relevant stuff that is
needed to load the image data is prepared ahead as part of pre_copy.

Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 12:16:15 -07:00
Yishai Hadas
b04e2e86e9 vfio/mlx5: Improve the source side flow upon pre_copy
Improve the source side flow upon pre_copy as of below.

- Prepare the stop_copy buffers as part of moving to pre_copy.
- Send to the target a record that includes the expected
  stop_copy size to let it optimize its stop_copy flow as well.

As for sending the target this new record type (i.e.
MLX5_MIGF_HEADER_TAG_STOP_COPY_SIZE) we split the current 64 header
flags bits into 32 flags bits and another 32 tag bits, each record may
have a tag and a flag whether it's optional or mandatory. Optional
records will be ignored in the target.

The above reduces the downtime upon stop_copy as the relevant data stuff
is prepared ahead as part of pre_copy.

Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 12:16:15 -07:00
Shay Drory
caf094b5a1 vfio/mlx5: Check whether VF is migratable
Add a check whether VF is migratable. Only if VF is migratable, mark the
VFIO device as migration capable.

Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 12:16:15 -07:00
ye xingchen
e951eaaf83 samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS
Change the prompt about SAMPLE_VFIO_MDEV_MBOCHS as
'Build VFIO mbochs example mediated device sample code'.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301301013518438986@zte.com.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 12:16:15 -07:00
Bo Liu
038ef0a476 vfio/mdev: Use sysfs_emit() to instead of sprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230129084117.2384-1-liubo03@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 12:16:13 -07:00
Herve Codina
e60259f77c
MAINTAINERS: add the Renesas IDT821034 codec entry
After contributing the driver, add myself as the maintainer for the
Renesas IDT821034 codec.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230126085137.375814-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:38:04 +00:00
Herve Codina
e51166990e
ASoC: codecs: Add support for the Renesas IDT821034 codec
The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting.
It also provides SLIC (Subscriber Line Interface Circuit) signals as
GPIOs.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230126085137.375814-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:38:03 +00:00
Herve Codina
545679837e
ASoC: Add Renesas IDT821034 codec bindings
The Renesas IDT821034 codec is a quad PCM codec with programmable
gain.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230126085137.375814-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:37:55 +00:00
Claudiu Beznea
514d7f9df3
ASoC: mchp-spdifrx: document data structures
Document data structures used by mchp-spdifrx driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-9-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:26 +00:00
Claudiu Beznea
c7db2a5943
ASoC: mchp-spdifrx: add runtime pm support
Add runtime PM support for Microchip SPDIFRX driver. On runtime suspend
the clocks are disabled and regmap is set in caching mode. On runtime
resume the clocks are enabled and regmap is synced with the device.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-8-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:25 +00:00
Claudiu Beznea
ddce4aecca
ASoC: mchp-spdifrx: remove struct mchp_spdifrx_dev::fmt member
Remove member fmt of struct mchp_spdifrx_dev as it is not used anywhere.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-7-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:24 +00:00
Claudiu Beznea
36187a67ab
ASoC: mchp-spdifrx: use unsigned long to store clk_get_rate() value
clk_get_rate() returns an unsigned long. Use a variable of type
unsigned long to store it.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-6-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:23 +00:00
Claudiu Beznea
aaecdc32b7
ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()
CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.

Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:22 +00:00
Claudiu Beznea
d3681df44e
ASoC: mchp-spdifrx: fix controls that works with completion mechanism
Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.

Issues identified:
- reinit_completion() may be called while waiting for completion
  which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
  will signal only one waiting thread per interrupt which may lead to
  timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
  ISR may disable interrupt for threads that were just enabled it.

To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.

Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:21 +00:00
Claudiu Beznea
a4c4161d6e
ASoC: mchp-spdifrx: fix return value in case completion times out
wait_for_completion_interruptible_timeout() returns 0 in case of
timeout. Check this into account when returning from function.

Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:20 +00:00
Claudiu Beznea
fa09fa6038
ASoC: mchp-spdifrx: fix controls which rely on rsr register
The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.

To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.

The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.

As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).

The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.

Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 18:36:19 +00:00
Randy Dunlap
71bc571c64 Documentation: power: correct spelling
Correct spelling problems for Documentation/power/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 19:13:20 +01:00
Matt Roper
3c4b33d0e6 drm/i915/dg1: Drop final use of IS_DG1_GRAPHICS_STEP
All production DG1 hardware has graphics stepping B0; there is no such
thing as C0.  As such, we can simplify

        IS_DG1_GRAPHICS_STEP(uncore->i915, STEP_A0, STEP_C0)

to just match DG1 in general.

Bspec: 44463
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-4-matthew.d.roper@intel.com
2023-01-30 10:08:19 -08:00
Matt Roper
69ea87e159 drm/i915/dg1: Drop support for pre-production steppings
Several post-DG1 platforms have been brought up now, so we're well past
the point where we usually drop the workarounds that are only applicable
to internal/pre-production hardware.

Production DG1 hardware always has a B0 stepping for both display and
GT.

Bspec: 44463
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-3-matthew.d.roper@intel.com
2023-01-30 10:08:18 -08:00
Matt Roper
d1702963ab drm/i915/tgl: Drop support for pre-production steppings
Several post-TGL platforms have been brought up now, so we're well past
the point where we usually drop the workarounds that are only applicable
to internal/pre-production hardware.

Production TGL hardware always has display stepping C0 or later and GT
stepping B0 or later (this is true for both the original TGL and the U/Y
subplatform).

Bspec 44455
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127224313.4042331-2-matthew.d.roper@intel.com
2023-01-30 10:08:16 -08:00
Jason Gunthorpe
fd9f2a9122 Merge branch 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu intoiommufd/for-next
Jason Gunthorpe says:

====================
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.

However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.

This series is the first step in fixing it.

The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.

Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().

Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.

A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
====================

* 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/s390: Use GFP_KERNEL in sleepable contexts
  iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
  iommu/intel: Use GFP_KERNEL in sleepable contexts
  iommu/intel: Support the gfp argument to the map_pages op
  iommu/intel: Add a gfp parameter to alloc_pgtable_page()
  iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
  iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
  iommu: Add a gfp parameter to iommu_map_sg()
  iommu: Remove iommu_map_atomic()
  iommu: Add a gfp parameter to iommu_map()

Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-01-30 13:54:35 -04:00
Mike Leach
c6535b6ba9 perf cs-etm: Update decoder code for OpenCSD version 1.4
OpenCSD version 1.4 is released with support for FEAT_ITE.

This adds a new packet type, with associated output element ID in the
packet type enum - OCSD_GEN_TRC_ELEM_INSTRUMENTATION.

As we just ignore this packet in perf, add to the switch statement to
avoid the "enum not handled in switch error", but conditionally so as
not to break the perf build for older OpenCSD installations.

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230120153706.20388-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-30 14:54:13 -03:00
Naveen N. Rao
dfadf8b315 perf test: Fix DWARF unwind test by adding non-inline to expected function in a backtrace
'DWARF unwind' 'perf test' can sometimes fail:

  $ perf test -v 74
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
   74: Test dwarf unwind                                               :
  --- start ---
  test child forked, pid 3785254
  Problems creating module maps, continuing anyway...
  Problems creating module maps, continuing anyway...
  unwind: test__arch_unwind_sample:ip = 0x102d0ad4c (0x36ad4c)
  unwind: access_mem addr 0x7fffc33128c8, val 1031c3228, offset 120
  unwind: access_mem addr 0x7fffc33128d0, val 12427cc70, offset 128
  <snip>
  unwind: test_dwarf_unwind__krava_3:ip = 0x102b8768b (0x1e768b)
  unwind: access_mem addr 0x7fffc3313048, val 7fffc3313050, offset 2040
  unwind: access_mem addr 0x7fffc3313060, val 102b8777c, offset 2064
  unwind: test_dwarf_unwind__krava_2:ip = 0x102b8770b (0x1e770b)
  unwind: access_mem addr 0x7fffc3313088, val 7fffc3313090, offset 2104
  unwind: access_mem addr 0x7fffc33130a0, val 102b87890, offset 2128
  unwind: test_dwarf_unwind__krava_1:ip = 0x102b8777b (0x1e777b)
  unwind: access_mem addr 0x7fffc3313108, val 10323a274, offset 2232
  unwind: access_mem addr 0x7fffc3313110, val ffffffffffffffff, offset 2240
  unwind: access_mem addr 0x7fffc3313118, val 102c08ed0, offset 2248
  unwind: access_mem addr 0x7fffc3313120, val 1031db000, offset 2256
  unwind: access_mem addr 0x7fffc3313128, val 7fffc3313130, offset 2264
  unwind: access_mem addr 0x7fffc3313140, val 102b45ee8, offset 2288
  unwind: '':ip = 0x102b8788f (0x1e788f)
  failed: got unresolved address 0x102b8788f
  unwind: failed with 'no error'
  got wrong number of stack entries 0 != 8
  test child finished with -1
  ---- end ----
  Test dwarf unwind: FAILED!

We expect to resolve test__dwarf_unwind as the last symbol, but that
function can be optimized away:

  $ objdump -tT /usr/bin/perf | grep dwarf_unwind
  000000000083b018 g    DO .data	0000000000000040  Base        tests__dwarf_unwind
  00000000001e7750 g    DF .text	0000000000000068  Base        0x60 test_dwarf_unwind__krava_1
  00000000001e76e0 g    DF .text	0000000000000068  Base        0x60 test_dwarf_unwind__krava_2
  00000000001e7620 g    DF .text	00000000000000b4  Base        0x60 test_dwarf_unwind__krava_3
  00000000001e74f0 g    DF .text	0000000000000128  Base        0x60 test_dwarf_unwind__compare
  00000000001e7350 g    DF .text	000000000000019c  Base        0x60 test_dwarf_unwind__thread
  000000000083b000 g    DO .data	0000000000000018  Base        suite__dwarf_unwind

Fix this similar to commit fdf7c49c20 ("perf tests: Fix dwarf
unwind for stripped binaries") by marking the function as a global and
adding the 'noinline' attribute to it.

With this patch:

  $ objdump -tT perf | grep dwarf_unwind
  000000000083b018 g    DO .data	0000000000000040  Base        tests__dwarf_unwind
  00000000001e80f0 g    DF .text	0000000000000068  Base        0x60 test_dwarf_unwind__krava_1
  00000000001e8080 g    DF .text	0000000000000068  Base        0x60 test_dwarf_unwind__krava_2
  00000000001e7fc0 g    DF .text	00000000000000b4  Base        0x60 test_dwarf_unwind__krava_3
  00000000001e7e90 g    DF .text	0000000000000128  Base        0x60 test_dwarf_unwind__compare
  00000000001e7cf0 g    DF .text	000000000000019c  Base        0x60 test_dwarf_unwind__thread
  00000000001e8160 g    DF .text	0000000000000248  Base        0x60 test__dwarf_unwind
  000000000083b000 g    DO .data	0000000000000018  Base        suite__dwarf_unwind
  $ ./perf test 74
   74: Test dwarf unwind                                               : Ok

Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20230125123442.107156-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-30 14:54:13 -03:00
Bjorn Helgaas
dec6b80164 ixgbe: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:05 -08:00
Bjorn Helgaas
c3c14ecfe0 igc: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:05 -08:00
Bjorn Helgaas
8aea4c3252 igb: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:05 -08:00
Bjorn Helgaas
ba153552c1 ice: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:05 -08:00
Bjorn Helgaas
bc4fddc3b3 iavf: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:05 -08:00
Bjorn Helgaas
d04d9e7699 i40e: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:04 -08:00
Bjorn Helgaas
3218487afd fm10k: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:04 -08:00
Bjorn Helgaas
601f46282c e1000e: Remove redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-30 09:35:04 -08:00
Arnd Bergmann
d4bde04318
spi: dw_bt1: fix MUX_MMIO dependencies
Selecting a symbol with additional dependencies requires
adding the same dependency here:

WARNING: unmet direct dependencies detected for MUX_MMIO
  Depends on [n]: MULTIPLEXER [=y] && OF [=n]
  Selected by [y]:
  - SPI_DW_BT1 [=y] && SPI [=y] && SPI_MASTER [=y] && SPI_DESIGNWARE [=y] && (MIPS_BAIKAL_T1 || COMPILE_TEST [=y])

Drop the 'select' here to avoid the problem. Anyone using
the dw-bt1 SPI driver should make sure they include the
mux driver as well now.

Fixes: 7218838109 ("spi: dw-bt1: Fix undefined devm_mux_control_get symbol")
Fixes: abf0090753 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Link: https://lore.kernel.org/all/20221218192523.c6vnfo26ua6xqf26@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230130140156.3620863-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 17:19:35 +00:00
Arnd Bergmann
248c07f92c arm64: tegra: Device tree changes for v6.3-rc1
There are two big changes in this: one is to bump the #address-cells and
 the #size-cells properties to 2 so that bus address translations work
 correctly and another to sort nodes according to a scheme that we've
 been trying to follow, but where some inconsistencies have accumulated
 over the years.
 
 As for the rest, this adds mostly new things on Tegra234, such as USB
 host and device support and identification EEPROMs found on Jetson AGX
 Orin.
 
 Some cleanups are also included, such as the removal of unneeded
 properties or duplicated nodes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmPT+8ITHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeasEACUpzao66vTI5wMw3S3DFuTyOF79xyI
 W2N4Wh+geanrJwtwEEboJgVD8JcE3u2+6OATHN+jEJ6/dNsndsnBopfG3Mqj8PCj
 hzVKi7eza/gdOFbFzGOwkPIyKRYNpNSU88tZhlOY33R7ou3dlr50AQsfOsR9p1c8
 +WCVfXK7Vcy5yhWuyQgcBrComnuWFdP/wxGmEvtyJj2HbGjGshjpPXpkYfN0GqWj
 DsoOUDQM6hNDWq+e3OzsvdjZkT6HuJvzUuQJVxP8cdsgYkBBgdeHOvv8QGe/1uRG
 FsuuIngfVmYM1UhHC6+KsGkxkH4hd//LJtOdz7OKCjuLt6q1X2PNMOw7OkY0X6he
 bilOHRvXp/Vy/MxPNzUU5BZQyaUu/NWj3PFtx2X3G7dNue3vK7bqHj27OvG96Whx
 HmAjXgsQQGf87+jyhJQ/sr/x7uMdmZlQ302GYxiEDUp95enqR9nKWAKZSGpRZ4uO
 trsN12MYv+YBtMj597r7j+UbMairWvx1loBxTrZPAWOLNGXhIfzPURO/xOyjbvMd
 lxZ2V82VxJ4APRdjwdEl1NEet/Yi4EWq0uanqETjF72eL0Ah70W9gdJ/fowEqJCU
 yt9bXU5BDc7fcwpSn5iX+PzsNGRyw2FrlLVyfOG6EHCwSSkEhqjCqHZF04hu+LBM
 H5zfEeZLbHxdtQ==
 =18G4
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX+3QACgkQmmx57+YA
 GNnjSw//SV3ne6MY8JlT/ZZbSkd0AAnfUkp6uigVnG8ehd8Aq/UAK8ITebyC6/3X
 xt1k/Y7rXIUxfcbk41Wj19bl+0fHODI+GAoWIBgU4aVIv8kg1K7cHj8xmbw4pWaE
 C9sTi0pBYEeffCBBqmk/XRJ0IQ3iwr5YlehhHCdNYqeEa8OjgfN/Pg3KIogkGkru
 +2Zn524HTILJC9swarhw7fwRFihLCkyVfo1Irr5RjvyqR4It58PGT8mPgoTg9TSC
 nMUWdYmFPVqCMg57RWyFkkGTHHhtq32jPfj4De4/a1eQuqhqQc1Eba/LKxwI9lNi
 uiCn2hoQpRSX1JMvzG07oMV1UVA+LbgUo8kOnNfgl62xd6nWRNoPTpjujrjkhmzF
 7T0kGYRKUdDjlnMSFCXTYgIAcC7FykPfMhprBZLJFcj4gr9ahiW38GF5whxthmW/
 5W7CvK6m0CqF2JJrpYgMhEQG1zcdhRKeaYQ/OKDoFLodLwCl/Hl0/JQkDMyzjUAM
 azccCVATNp+8Nh6wGiuPj5Ru1IKcp4bUgJ8OWDAjuIV4un1+2frBatgCrB83p/5z
 GQh/EZx8gF1e7t2dmvVZWf5jbfw0Nx0y286SwxYN0xrmvx0slMkG1kcujmlq7UoV
 sVgXJnviF16GGnE6B60RTngrX3EMgXCgyhCl4tgy2jUyiInC3L4=
 =ECwG
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v6.3-rc1

There are two big changes in this: one is to bump the #address-cells and
the #size-cells properties to 2 so that bus address translations work
correctly and another to sort nodes according to a scheme that we've
been trying to follow, but where some inconsistencies have accumulated
over the years.

As for the rest, this adds mostly new things on Tegra234, such as USB
host and device support and identification EEPROMs found on Jetson AGX
Orin.

Some cleanups are also included, such as the removal of unneeded
properties or duplicated nodes.

* tag 'tegra-for-6.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Drop I2C iommus and dma-coherent properties
  arm64: tegra: Mark host1x as dma-coherent on Tegra194/234
  arm64: tegra: Populate the XUDC node for Tegra234
  arm64: tegra: Add dma-coherent property for Tegra194 XUDC
  arm64: tegra: Populate Jetson AGX Orin EEPROMs
  arm64: tegra: Populate address/size cells for Tegra234 I2C
  arm64: tegra: Enable XUSB host function on Jetson AGX Orin
  arm64: tegra: Sort nodes by unit-address, then alphabetically
  arm64: tegra: Bump #address-cells and #size-cells
  arm64: tegra: Sort includes
  arm64: tegra: Fix duplicate regulator on Jetson TX1
  arm64: tegra: Fix typo in gpio-ranges property

Link: https://lore.kernel.org/r/20230127163719.460954-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 18:16:35 +01:00
Arnd Bergmann
cdd070a4e1 ARM: tegra: Device tree changes for v6.3-rc1
Just a single patch to properly sort nodes and make the DTS files easier
 to read.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmPT+xITHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoSWvEACEjE3sBBpASOqfan8Gcf0JlToU/njR
 TuMFOh2YLSdKiTLnp0ngq/PS9YmxgWT9CnVdB7HFxoiafnRPuDi5xpRSDlKaptfh
 +7w1INOQTTFo+tgltx+HoFTHRUkR9C38+vKeks0DF/TenbMMtYZmvItZoGWqfXVR
 gVA1g04twlnYw9k3WB+QIZNPEUF2PCJ+C5d3s9Uz+Zy9uzKMnFtUcNdhwduEkjEC
 xoxv0wxDsG0HSR8DPjzcONhNUw0KrwQx61yulCMxMLB+3xkVc/QtKACL732G7u8N
 sDXpyCgd4sDJv4/RUbYKhFU9wtX4cRgpT21RiiMAgju+AHY7bbMHwkQARYVOugKA
 +Z5XbGbI8bdNe4EeOPuGQYxPtoRmTc4o8PbbqDJpWZmSJVWuSQr8Cw0mWaap/w77
 zDilzftDs2oWR/0QDSycULDOpstDZ0Cc2aCk5QFINOdI3h6QL0496zMAkLAzDmir
 ycwq4+kmjbdNjo+Z/A2ZOzh2qItx/CdtN1WdejPw+yLtq3w+1H3uMeMZTJVFktj3
 whxA3IhiLf4axw7qzwIL8ekRNUfrfJFouc3gcLXIXonho5COjhHqU+yR+3VG5HRg
 pEXWH3Go8wox1wqb07iEy3k0YqMCl9CVLQegYSkOHeJ6q3G/EfnKbKKtfRxNDcU5
 Zk8kquz4pA4Tkw==
 =aBEY
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX+0UACgkQmmx57+YA
 GNmWkA/9H+I/U6q00ZQ1NFIEusZpmj+UVCX4Qh4OWPbXpap0tshN2qJiOJoi1pN/
 Sqx/Yqyo42jIvg7OSDiWn/YHjr3LZd6q5KMDccKLA+2o/mlMFQcSsliBh/cUTnf+
 +gT613DxEBes/TXOI6XvvNrBQAgxAiKlvwSpTbwlZ0LLP6IWXv2ZKvn+jF6lvDYn
 ixZqdJwoVcD0ryChLXH591TQuf93VYTkqpL3glhPK7ZZfCllE1JQUZY14vGon4Mk
 W8jV+/PcQJxKYOZ4SKK19KMoBSDb51gMhfAXOFlPDXG8zqc1uvjl1XPy0Xk87hUU
 nU2D4x+nbya7YqFhXHy56C2v0jxZVDpCTFQecsT8HaelYLOnfIfPknLrd0CiLfr0
 S7BQ9l4Jl9yDn4Z/2pA/AmV3ljgeFK4n7CSS09ZPKBWfCPXH1mu6VfmT07IhYcnI
 MzityXpDfngSWjRVyS7t93kGtWz8eue7xNBHtx9xnfFp4xDEA3QBevfKtNcIkIM6
 vLl3/3Kw8GUXBFCyzm8dZ8ZWhWhMjcfqVJNXI3v9s/+nFz71EEVzB+ng7H5DoD/I
 MXp2UhK4e/E0CvpWbEji3O7LkZGObvOk8ZfqdnFU7AaspUQGyJYHxz/9Rn5kqEtb
 euME6D2cyQnnOGXYxB0SUNzqKlDKd4SdSl0W7dfJE0E+IVe1pUI=
 =/d/t
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.3-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v6.3-rc1

Just a single patch to properly sort nodes and make the DTS files easier
to read.

* tag 'tegra-for-6.3-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Sort nodes by unit-address, then alphabetically

Link: https://lore.kernel.org/r/20230127163719.460954-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 18:15:49 +01:00
Arnd Bergmann
3fb0520dcc dt-bindings: Changes for v6.3-rc1
Device tree files for 64-bit ARM Tegra SoCs have recently had to bump
 the #address-cells and #size-cells to 2 in order to support bus address
 translations across the entire device tree hierarchy. Explicitly allow
 this in DT schemas to prevent validation errors.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmPT+t8THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zodtAD/982iXxB28/JExAo0Kj4t6qO7KIX6ot
 a0J0a8Vw8wYNb6KABvy2xJ/Qh4/h8L607VePI7yQ4Sqi/tZB8k6v627CGRRHnulK
 U64CIC+lvgPPTTHsRR8gbWO1L7va7KGGALCZQ9H7vLEUAqsu8YeRRVoXstQeL9P8
 l1FwGarHgrBe2vgBhtfSkSNgUBF3YD37oQef14WxtEFn+rREao0nbMLbI2P7c66Y
 GY2pqmy8XWE9YEmtknotDd4k/viFT+KjRqrDjw0yer8ejaG2Yb3oocjAg/FMMTpY
 erP4kqHFD9iNuD51GC75zGEOQieP+ljlMD6V7DxZm9qMRrPx69e11JKdqfgM0cEO
 Q3F6ecEBMXD918YUgORaH4CjokugA7HOkeAf6nIyoKr2CIU1jQgEcJUYMBoRG/X+
 NP4VIHceiEcli3hTP3jLfVGDXoW/EEb//G43fw2tNG26ykx7ihH5TGWOHxR71iBT
 Qhu+2A4L6EOrfVZdTyPYlVU3aTUh40rzhcjt3tTM+bjtjjlMt2+XgD2wRwKOxgrv
 kVwy607BDExuYeS4/K6fYTKesgXOpCTMC7Z6oFQ/d5PllWJr/RjbSvgWZALhvmRK
 hwLNi3HNFCYRkcPu8Ks+x0LJSno7zbxblEtLXtPB0FgcCtAAukcw+L/Vghydzelv
 Z20VJhK3yl2noA==
 =wVQZ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX+ygACgkQmmx57+YA
 GNl64A/+OMHgtbL3kslG0f2FgSUfQZ944bCrdvS/IU/kA5Tedu78cnZOZi4XZWsO
 FqeIGjETNagiqVwihDwoJSXVHlZDWZP7UFHyoxmMaaORSEuwEkhLd5YLWW7BPktw
 l/BjW3jV1IGMH4rOWwbCdTL+f3Rd0W/fO6BpsG7kNsPxw4jZfwuLZ5q6TUz801ow
 nlKO/qMFNbdNAEE63k7DJsUAUHBT817TWr9nCHGH+Ok/sLOvR+6P7Kl5jkOThxNe
 IEHT/kEy0LIITN4AVUSnsHE+wcsmn8LlC1AGALTpg8IpER6vRnlhuwwdteSsh+V6
 dIWx44f1ntP3gmSYbB/KUxIWmqQwJsAFZvqiRet3CBNQtfnZXhB9CEYQrUlXDyNi
 tI92NI+SG5z8dgiJqvrn8lk4hplP2WGgJiRBhM2osxQMGQ3FzBac01sPlDuRGcRt
 NgjvoOc7krtsL9nHe3VmJfvSybpS020XVCuibLwbu7VbOQkBbAj8qbTLq/DQzb5l
 OCMaBgLXNN4TOjhn9KvX/MxmCWoKHZg8yENiW3PlxXR1248TMyo/HDx6nTBD0JyU
 Xc5UIxNRRkVmbtThq7caRjNR6VliKT4tziGsGUmZ/rAYnEepJl1T7t4sFoBpU0NT
 VtmSVsgXDZfj42c8S9bXaUi6Q0UMhqetu3uX7Ko7eBhv4Myz2HY=
 =AcTG
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.3-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v6.3-rc1

Device tree files for 64-bit ARM Tegra SoCs have recently had to bump
the #address-cells and #size-cells to 2 in order to support bus address
translations across the entire device tree hierarchy. Explicitly allow
this in DT schemas to prevent validation errors.

* tag 'tegra-for-6.3-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra: Allow #{address,size}-cells = <2>

Link: https://lore.kernel.org/r/20230127163719.460954-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 18:15:19 +01:00
Arnd Bergmann
ad3c046a26 Renesas DT updates for v6.3 (take two)
- High Performance mode (1.8 GHz) support for the Cortex-A76 CPU cores
     on R-Car V4H,
   - GPIO interrupt support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
     development board,
   - USB Function support for the RZ/N1D SoC,
   - Generic Sound Card driver examples for the Renesas R-Car Starter Kit
     Premier/Pro and Shimafugi Kingfisher development board stack,
   - Universal Flash Storage support for the Renesas Spider development
     board,
   - External Power Sequence Controller (PWC) support for the RZ/V2M SoC
     and the RZ/V2M Evaluation Kit 2.0,
   - IOMMU support for MMC on the R-Car S4-8 SoC,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9Oc1QAKCRCKwlD9ZEnx
 cMRKAP0S0VgkOJU9n+qrDdFNYeCAwLkJbcpWMsc4xy/dxt1gIQEAxbnJpGcmdAis
 qiY67N7RU8mST1R7QACUEcvygxvqLwI=
 =dAM5
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX+vEACgkQmmx57+YA
 GNk6hA//Xbr/6Ey1bGx6jweljSEvLpOZkMCKiprOlJ7aaKM3SXfO2BK447zADtar
 D9ooowc/IHBt4DNltVsAol5dm6QgQjcrs4+S04qFsdPtEtEmy59JS7e4m3BWKlTe
 AJucF5A8g9HACAYs3zq6iEK8gGnJU2qW1ysiU03ypf9ctfDsir8eWgzCV0P3lgmr
 1Rb29ZG0m661ucDNFM5tGOMpJ3yFGgAx1YnNtdn2XMOs3txFZ9hS0lPAOaBd7Wmj
 hBDxJPWye7BG3zAo8vCYPDZcvDgl4iGKpmqHJ+p5fA5tD/od/tpyM/ih94pzv9iW
 8yqpaIUNpwZ7VD1wITVxWXUOqubNyXo5f5dqWwjcOkp2toc+xn2gJFPD3ffsjghT
 YmvRlglaOUHt09Koinb0SYrNBhGnN2qtYYfZzvRWJZmAhT/gzH16/ezuoI9DMy26
 cwO8DsXMLA9QKxKVyzq9Y+9gKRXj6dtJhEjUheax/AfeW2q4Bs9fVG4bSw9LLYb4
 vSVRIgBhojWvCA/t0vt1tmK+Nw5abm+m3Mfiq8E6rmR5yWqRmoN3mHaUNs4XOllI
 sGd4NtO1uqM/SbovLMkccw4NaU0wUdcnYtKsem7dl1Jo5yWUbg8EGh6jRXdtILEt
 SLRrc5NkG4kEbGRqSQ9ieINdw3bWUn2kOLbKcWFDwtqzkq6Ucqk=
 =YAr2
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dts-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT updates for v6.3 (take two)

  - High Performance mode (1.8 GHz) support for the Cortex-A76 CPU cores
    on R-Car V4H,
  - GPIO interrupt support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
    development board,
  - USB Function support for the RZ/N1D SoC,
  - Generic Sound Card driver examples for the Renesas R-Car Starter Kit
    Premier/Pro and Shimafugi Kingfisher development board stack,
  - Universal Flash Storage support for the Renesas Spider development
    board,
  - External Power Sequence Controller (PWC) support for the RZ/V2M SoC
    and the RZ/V2M Evaluation Kit 2.0,
  - IOMMU support for MMC on the R-Car S4-8 SoC,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
  arm64: dts: renesas: r8a779f0: Add iommus to MMC node
  arm64: dts: renesas: v2mevk2: Add PWC support
  arm64: dts: renesas: r9a09g011: Add PWC support
  arm64: dts: renesas: r9a09g011: Reword ethernet status
  arm64: dts: renesas: r8a774[be]1-beacon: Sync aliases with RZ/G2M
  arm64: dts: renesas: beacon-renesom: Fix audio clock rate
  arm64: dts: renesas: beacon-renesom: Update Ethernet PHY ID
  arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
  arm64: dts: renesas: spider-cpu: Enable UFS device
  arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 MIX + TDM Split dtsi
  arm64: dts: renesas: Add ulcb{-kf} Simple Audio Card dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card2 dtsi
  arm64: dts: renesas: Add ulcb{-kf} Audio Graph Card dtsi
  arm64: dts: renesas: #sound-dai-cells is used when simple-card
  ARM: dts: renesas: #sound-dai-cells is used when simple-card
  arm64: dts: renesas: eagle: Add SCIF_CLK support
  ARM: dts: r9a06g032: Add the USBF controller node
  arm64: dts: renesas: rzg2ul-smarc-som: Add PHY interrupt support for ETH{0/1}
  ...

Link: https://lore.kernel.org/r/cover.1674815099.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 18:14:24 +01:00
Arnd Bergmann
edb3f74332 Renesas DT binding updates for v6.3
- Document support for the Renesas RZ/V2M External Power Sequence
     Controller (PWC).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9ORtAAKCRCKwlD9ZEnx
 cAcfAPwOEfgSSAbC01T9A+Yg/53F19CKMkBvQI5qkAGeRCcfvgD+JrMJUYjD9J0Y
 9X56SAGowDq+dElFiMisnnhq+qv31gw=
 =jKk1
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX+oQACgkQmmx57+YA
 GNmRBw/9GSqd0IhLxjLD35XcP+VKCPd7CSsSjLfnWXyGarhlax6+KqVePqUg4t83
 piSJM++K6CXtnU4Im2MCp8fsCGypRPKiYV0/e0Y2E0lgtYd/hxYseGe4X1lpyN5u
 bFD7q9ANPljKsBn49Bs8pNVhM+2HJHNNkqCcDE21o4wUp+XUx1g8vMzoAPRXnlQ0
 v9gW28XP/br0MtGZUYJ0d28aokk7eWzQiHTv2UITj4jLtsFiatRPbFHUfn+c2nk8
 lWIgKKQj8suCYOEioGEpzy1OYcUeAhuE6MPhLFpoYcdR4PtlYe8n2NOb5Cgj4Tmw
 9kz2t1TeFCrCGaOAb3nd0+L2RqdVpPFzxIlRD5EAt7R0ZkCY9fLt60dVXCyWBfNq
 bmrDFAEJX0vp+qLpZC2Fwp6EaOIMw+2LrTv7LodQv5DDZ2E1xwFZyRbcLtgwuUvH
 JVu3in6ndvE29mCDKw8kaCIPDlsdL2opLnm5CjCMYAc/fvbtiW0AfnurXE8t9ImB
 eGxnRc4JlhbgYvQ0w3+qWoe3YBhV6uaYOhxeIzX2vWHCSapIKcQjMlms2w8CD0Nk
 ivFkIqYGI3XMy1zVpPj7WE1Hg0zMNOtjPBF5sqFFpnoX0fCKL6dAoSUP8en9QRiK
 SDHerD5V/e03UtY+9u/j8av5z/fDpPiCRtdj7xxpCt3kd5c6M5k=
 =cbob
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v6.3

  - Document support for the Renesas RZ/V2M External Power Sequence
    Controller (PWC).

* tag 'renesas-dt-bindings-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: soc: renesas: Add RZ/V2M PWC

Link: https://lore.kernel.org/r/cover.1674815097.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 18:12:35 +01:00
Amadeusz Sławiński
31e9273912
ASoC: topology: Use unload() op directly
struct snd_soc_dobj only needs pointer to the unload function, instead
however, there is pointer to all topology operations. Change code to use
the function pointer instead of pointer to structure containing all
operations.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:41 +00:00
Amadeusz Sławiński
fdfa3661f8
ASoC: topology: Unify kcontrol removal code
Functions removing bytes, enum and mixer kcontrols are identical. Unify
them under one function and use it to free associated kcontrols.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:40 +00:00
Amadeusz Sławiński
d9b07b790a
ASoC: topology: Remove unnecessary check for EOF
Caller already checks if hdr_pos is behind EOF, before calling
soc_tplg_valid_header(), so there is no need to recheck it again. This
also allows to remove behaviour of return 0 - forcing the caller to
break out of while loop.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-10-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:36 +00:00
Amadeusz Sławiński
b784617a40
ASoC: topology: Return an error on complete() failure
Function soc_tplg_dapm_complete() detects an error and logs it, but
doesn't return failure to the caller, fix it by returning the error.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:09 +00:00
Amadeusz Sławiński
9e2ee00039
ASoC: topology: Pass correct pointer instead of casting
Instead of passing address of structure, the containing structure is
cast to target structure. While it works - the expected structure is the
first field of containing one - it is bad practice, fix this by passing
pointer to structure field.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:08 +00:00
Amadeusz Sławiński
70a7cd09a6
ASoC: topology: Remove unnecessary forward declarations
There is no need to forward declare functions if their use is after
their definition.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:07 +00:00
Amadeusz Sławiński
2abfd4bd7b
ASoC: topology: Rename remove_ handlers
Those are the only functions missing soc_tplg_ prefix, add it for
consistency.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:06 +00:00
Amadeusz Sławiński
23e591dc0f
ASoC: topology: Fix function name
Functions other than soc_valid_header have soc_tplg_ prefix. Rename
function to follow convention in file.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:05 +00:00
Amadeusz Sławiński
8f9974d9d7
ASoC: topology: Fix typo in functions name
Topology is being abbreviated to "tplg", not "tplc", however, few
functions have typo in name, fix it.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:04 +00:00
Amadeusz Sławiński
6257d224b8
ASoC: topology: Remove unused SOC_TPLG_PASS_PINS constant
The constant is unused, so it can be safely removed.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:03 +00:00
Amadeusz Sławiński
c5d184c92d
ASoC: topology: Properly access value coming from topology file
When accessing values coming from topology, le32_to_cpu should be used.
One of recent commits missed that.

Fixes: 86e2d14b6d ("ASoC: topology: Add header payload_size verification")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230127231111.937721-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-30 16:56:02 +00:00
Arnd Bergmann
2e0f3acb90 Qualcomm ARM64 Devicetree updates for v6.3
This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
 platform.  In addition to the adding support for the MTP on this
 platform, support the following devices is introduced:
  - GPLUS FL8005A
  - Google Zombie with LTE and NVMe
  - Google Zombie with NVMe
  - Lenovo Tab P11
  - Motorola G5 Plus
  - Motorola G7 Power
  - Motorola Moto G6
  - Samsung Galaxy J5 (2016)
  - Samsung Galaxy Tab A 8.0
  - Samsung Galaxy Tab A 9.7
  - Xiaomi Mi A1
  - Xiaomi Mi A2 Lite
  - Xiaomi Redmi 5 Plus
  - Xiaomi Redmi Note 4X
 
 On IPQ8074 the PCIe PHY register regions and PHY clock names are
 corrected.
 
 On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
 unconditionally enabled. Per-sensor calibration data is provided for the
 thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
 gains support for touchscreen and flash LED. An additional Samsung
 Galaxy J5 variant is added, and support is added for hall sensor and
 MUIC.
 
 Per-sensor calibration information is introduced for the thermal sensor
 on MSM8956 as well.
 
 On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
 carveout is added to get modem metadata out of System RAM. Missing bus
 clocks are added for agnoc2.
 SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
 high-speed, to make USB work.
 
 MSM8998 gains the same modem carveout as other platforms, and the
 description of the clock hierarchy is improved.
 
 On QCS404 the clock hierarchy description is improved, the CDSP PAS node
 is adjusted to match the binding and the thermal sensor (tsens) gains
 per-sensor calibration information.
 
 On SC7180 the Data Capture and Compare block is intorduced, and a
 carveout for the modem metadata is introduced, to get this out of System
 RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
 adjusted for the Trogdor eDP and touchscreen.
 Data lane and frequency properties are introduced for the DisplayPort
 links.
 
 SC7280 also gets Data Capture and Compare support, as well as the
 dedicated modem metadata region. Herobrine gains DP audio support.
 IPA description is updated so that it's only active on boards with a
 modem.
 
 On SC8280XP the display subsystem is introduced, currently with support
 for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
 introduced, for audio support. Missing I2C and SPI controllers are
 introduced.
 Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
 the SA8295P ADP automotive board. The SA8540P Ride platform enables one
 i2c and pcie controllers.
 A CMA region is defined for the CRD and X13s, to avoid allocation issues
 from the NVMe support.
 
 Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
 a description of simplefb.
 SDM670 gains QFPROM definition.
 
 SDM845 gains a carveout for the modem metadata and support for the Data
 Capture and Compare block is introduced.  Lenovo Yoga C630 firmware
 paths are aligned with all other Qualcomm platforms.
 
 On SM6125 apss SMMU is introduced and streams are defined for USB and
 SDHCI controllers. GPI DMA description is introduced, as well as missing
 SPI and I2C serial engines.
 On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
 introduced, and I2C and related GPI DMA blocks are enabled.
 
 On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
 CPUfreq.
 
 Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
 enabled as well.
 
 On SM8150 the display subsystem is introduced, with clock controller,
 DPU and two DSI controllers. The Data Capture and Compare block is
 introduced.
 For the Sony Xperia Kumano platform, GPIO keys and NFC support is
 introduced.
 
 For SM8350 PCIe is introduced, as is the display subsystem with display
 clock controller, DPU and two DSI controllers. #interconnect-cells is
 changed to 2, to align with other platforms and allow for active-only
 votes. The display is enabled and the LT9611uxc found on the SM8350
 Hardware Development Kit board is described, to provide HDMI output.
 
 On SM8450 the display subsystem is introduced, with DPU and two DSI
 controllers.  GIC-ITS support is introduced for both PCIe0 and PCIe1.
 SPMI bus support is introduced and pmics are wired up across the various
 devices.
 The display subsystem is enabled and the LT9611uxc is described to
 provide HDMI output on the SM8450 Hardware Development Kit.
 On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
 introduced. As is the SLG51000 PMIC and camera regulators are defined.
 
 Support for SM8550 is introduced, with support for storage, USB,
 remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
 blocks are enabled on the MTP.
 
 Lastly, the work continue to align Devicetree source with bindings
 across all platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPS4ZcVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FRwEP/2QtUk6NbjqnxdzEXYlwb8WCVnH+
 IZgdKWB2JLezXWCiKiKzmQVKVkTHXuuM7PHhojuO3Ye98/wPVA2nL79AL+jA2Ict
 k54SwCQ0PP9PpuptH351eXE/sh60nP97zsZ82V7oLfN/HdP5yAjR6Kc/iSpcdQZm
 nWNrHchuKAmpb6AitI7xGxy6D5quWh/8SgfI8sJ9SDxsOMhWXptV/Jgqy+nmOAJY
 FOMb7Y83sWgOXP77lW3T5+vfMkgPGtLD3EicMB/4HEMyDAVnWgRVzfvJ1qJsEv27
 I2K+cmqPCGcXJ9H1sYcvjXF/l0k1VqBXZMQZah2Ox/BnrBlt61iKGOHXZFPiYLt3
 Sg2fwqKaCNo/TdR37ZCLM5EEmqq94pD5llGVOW6JZzoExWrEgFNRdVqjIfqqNaUq
 +7aU7eUS2EfmiIyRPX7B3F33vz9v18fU1Z7b2n8qI/kH9rRpQAIfhJrpbTgSf9vL
 hPQ7ukkBqpzYryKaSmpgmkRCHGrWE97XZn3U1Gb8Fk7fW90jAWQVAYQHD8xowJ8F
 NxPv2E3YbgFxsFls6miVPYd1n88mN0QGJUZvQBYxtDahtw/BA9Ti62cYw1GH3lIx
 fT/lficEsX/oNLaKaHo3C8160iX0XQMeWYRzZOEs00MfStVjgtNsPxB7yhNf7e1Q
 MSnwJcsJzHMB29Zu
 =I+bB
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX9fAACgkQmmx57+YA
 GNkFhQ/7BuSIIp1HwWB6zbAj6ex9LMlTFShJISmw6QhK9eBiEophMw3NAiP/zU3M
 CgHp8jRK02/hHK7q113I0zVvPwz44BX8LtGmtiodnSAygzb68JALhoP3r6K53gdo
 +6VJYmTiQ0Ft5BVzlBKlqX67Yp5IefvJv5enqE31OI7o8tTHCOnh7ldLqTqp1Iep
 QMrTmqY5wyYOyIBxNYMtI+TZWOabjVz3ftx7atqc9FoRco6Q2nhyM1TFoFbf4KQD
 EOyN2lsDsy5h+A4l70MIn2A0+jA9W/d9P1JMEA0Xzd5WvWa66HKxuMxnfJRlXuD9
 nTYSBBqpMKXqKh3EbmhiXNuCML4Ia6o9yWpzi2Y3h5wfOv5AmM+JGyPTyzBDS3ZR
 bvm0IX3G/m7kuS+4pPD0P0+If281q2oR/JjXSOn1Y8Ew/6ACW8o3sIUh2xGIY6Gv
 OPL1l0CKokhB8Fmcw352oN51m6IQGAVVggqaSp7/HP76M99h/I32cn2Zzz7tvz/y
 ClxAcW5iV3H7cFCNeJVTjzrEZv+LIjmHDEgSFtYuUeNmFUurkTcsFryBm9mTaD8u
 mx1HpqbRUMMTuAmvzLhRlLhHwSuTn1OmB8+1ObUHSxcgKKw+T4u6iz40qRFCzmVl
 129xys8RtAXjShu0j2lEntCUMqeMWDpIOTaUqrBzFWnW0fBa/Vs=
 =E5w0
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Devicetree updates for v6.3

This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform.  In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
 - GPLUS FL8005A
 - Google Zombie with LTE and NVMe
 - Google Zombie with NVMe
 - Lenovo Tab P11
 - Motorola G5 Plus
 - Motorola G7 Power
 - Motorola Moto G6
 - Samsung Galaxy J5 (2016)
 - Samsung Galaxy Tab A 8.0
 - Samsung Galaxy Tab A 9.7
 - Xiaomi Mi A1
 - Xiaomi Mi A2 Lite
 - Xiaomi Redmi 5 Plus
 - Xiaomi Redmi Note 4X

On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.

On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.

Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.

On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.

MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.

On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.

On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.

SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.

On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.

Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.

SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced.  Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.

On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.

On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.

Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.

On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.

For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.

On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers.  GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.

Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.

Lastly, the work continue to align Devicetree source with bindings
across all platforms.

* tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (320 commits)
  arm64: dts: qcom: sc7280: Add a carveout for modem metadata
  arm64: dts: qcom: sc7180: Add a carveout for modem metadata
  arm64: dts: qcom: sdm845: Add a carveout for modem metadata
  arm64: dts: qcom: msm8998: Add a carveout for modem metadata
  arm64: dts: qcom: msm8996: Add a carveout for modem metadata
  arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
  arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
  arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
  arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
  arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
  arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
  arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
  arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
  arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
  arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
  arm64: dts: qcom: sm8250: drop unused properties from tx-macro
  arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
  arm64: dts: qcom: align OPP table node name with DT schema
  arm64: dts: qcom: rename mdp nodes to display-controller
  ...

Link: https://lore.kernel.org/r/20230126202528.3691539-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:53:03 +01:00
Arnd Bergmann
de858a05c9 vfio-mdev: add back CONFIG_VFIO dependency
CONFIG_VFIO_MDEV cannot be selected when VFIO itself is
disabled, otherwise we get a link failure:

WARNING: unmet direct dependencies detected for VFIO_MDEV
  Depends on [n]: VFIO [=n]
  Selected by [y]:
  - SAMPLE_VFIO_MDEV_MTTY [=y] && SAMPLES [=y]
  - SAMPLE_VFIO_MDEV_MDPY [=y] && SAMPLES [=y]
  - SAMPLE_VFIO_MDEV_MBOCHS [=y] && SAMPLES [=y]
/home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_remove':
mdpy.c:(.text+0x1e1): undefined reference to `vfio_unregister_group_dev'
/home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_probe':
mdpy.c:(.text+0x149e): undefined reference to `_vfio_alloc_device'

Fixes: 8bf8c5ee1f ("vfio-mdev: turn VFIO_MDEV into a selectable symbol")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230126211211.1762319-1-arnd@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-30 09:49:39 -07:00