Commit graph

1,185,212 commits

Author SHA1 Message Date
Arnd Bergmann
b453988c59 RISC-V Devicetrees for v6.3-mw0
Microchip:
 A vendor prefix for Aldec and both a binding and Devicetree for the
 Aldec TySoM devkit for PolarFire SoC. This Devicetree corresponds to
 what they are shipping in the SDK for rev2 boards.
 
 StarFive:
 Just the binding for the new StarFive JH7110 SoC and its first-party
 SDC the VisionFive 2.
 
 Other:
 I was expecting the Devicetree for the aforementioned board to be ready
 for this window, as the pinctrl driver had seem some review prior to
 v6.2 and both it & the base clock drivers are heavily based on the
 existing drivers for the JH7110.
 That didn't come to be.. Christmas, the RISC-V Summit in December and
 the Lunar New Year all playing a part perhaps.
 Because of that, both Palmer and I have the Kconfig.socs work in our
 branches, although in hindsight it probably wasn't needed here as I
 only added the TySoM Devicetree & the conflict would've been trivial.
 
 Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCY9EPgwAKCRB4tDGHoIJi
 0l9kAQDJHyrjfXMooRHSFXRUsJFYeN8MpYvD1CLavdrD+Pu+KQD/c1sApjfZrKjo
 ItyEL37F2QJOAFY1rAxdB7d6ppsUEAQ=
 =sN4y
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX9PcACgkQmmx57+YA
 GNn4Xg/+MykVFbZuQZbFuzD9DNA3BnHJuJL+5Uz1Ywy9H+Katl4hQGRLlt4WtRzC
 fWuteoPmNwvsbxuDRQ3sDC2oqRFVFD45u/q7qQ4ce+dKDbL2qpnbgxdmXVXdJrgL
 e9Wb9V01j8vLimNvFspicnaajFwDEC1uGLbVaZ+RKEk6GxxlJEJqydUsa2FVbQIf
 QDMEtR967fI3CUZ2wvzplJDDGBBKZbXxuZ/tOaTwEGPKFxbzQ5CBP7CFkbfEEjTZ
 kbcHsfLloKLL1/11oBeR6aPhY1WQvecBHO9WZ3ANR+/+2GT9SLdPbCWQN+uWM9ZI
 B5/SvtvJhzyP6HG+ErX/Pc8NPjm6AKMoo6j8fLuy8pASJF+H3tV9bn9mj4ld6B1S
 Vz8D1/hoh7OIuEaRDdfzW8xHQS6qQF58MRS3J8+I3xTUs4ZP6JifnOdIcrbXYvup
 +SFRgtoewV4wMxPshM+5FsVqsE4xSnvdwZeuxIjqpFY/CvlubFJdT9FBx8tx+v+G
 rC7MtoggznsQi1BDShGbu0xNAmE6iJcv9mranFm6NQUXC5/1SObIA9RFb0aBBJoQ
 DsU1rDqWndh9bILZkoikpPQ0uZWwAOFRpp44CSZ6/YtYPDku99YWozxqCeGGw4gN
 V18SjBXgL9YZfQKH3Z0biOdv6m2vLJKoj5hxgzu0KFxbCFlrl+A=
 =SCZP
 -----END PGP SIGNATURE-----

Merge tag 'riscv-dt-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/dt

RISC-V Devicetrees for v6.3-mw0

Microchip:
A vendor prefix for Aldec and both a binding and Devicetree for the
Aldec TySoM devkit for PolarFire SoC. This Devicetree corresponds to
what they are shipping in the SDK for rev2 boards.

StarFive:
Just the binding for the new StarFive JH7110 SoC and its first-party
SDC the VisionFive 2.

Other:
I was expecting the Devicetree for the aforementioned board to be ready
for this window, as the pinctrl driver had seem some review prior to
v6.2 and both it & the base clock drivers are heavily based on the
existing drivers for the JH7110.
That didn't come to be.. Christmas, the RISC-V Summit in December and
the Lunar New Year all playing a part perhaps.
Because of that, both Palmer and I have the Kconfig.socs work in our
branches, although in hindsight it probably wasn't needed here as I
only added the TySoM Devicetree & the conflict would've been trivial.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: dts: microchip: add the Aldec TySoM's devicetree
  dt-bindings: riscv: microchip: document the Aldec TySoM
  dt-bindings: vendor-prefixes: Add entry for Aldec
  RISC-V: stop directly selecting drivers for SOC_CANAAN
  RISC-V: stop selecting SiFive clock and serial drivers directly
  RISC-V: stop selecting the PolarFire SoC clock driver
  RISC-V: kbuild: convert all use of SOC_FOO to ARCH_FOO
  RISC-V: kconfig.socs: convert usage of SOC_CANAAN to ARCH_CANAAN
  RISC-V: introduce ARCH_FOO kconfig aliases for SOC_FOO symbols
  dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board

Link: https://lore.kernel.org/r/Y9LP+Za1h0fkBa58@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:48:55 +01:00
Arnd Bergmann
be836a16f4 Qualcomm ARM DT updates for v6.3
This introduces support for Acer Iconia Talk S A1-724
 
 The Samsung Galaxy Tab 4 10.1 gains ADSP and backlight support.
 
 The Xperia Z2 Tablet gets charging enabled and the touchscreen is given
 a little bit more time to start up.
 
 APQ8064 and MSM8974 gains improvements in clock hierarchy. APQ8064
 thermal sensor (tsens) driver gains per-censor calibration data.
 
 Lastly a set of patches that improves DT binding compliance.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPSvIoVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FUC8QAK22GnSpj06z446YMwQ9/unEkzOq
 uKDuDmRUbLtxmMjtZNXTBHOWiDKojagURR8zqUlRuwrCw2z+EEkbpttC13UJx8fV
 jhXJ9Ha7GoMK5ZNopQeVx5/0zyraAlxRJsN3A+QJlCNFlumXRADLQrKRqOFeDuY6
 /ny1Q+lDXI4uUfHS6VFDIUEyN1n2XziYwuzgI4Kjr0H8SxFBgZjjEyHlUnXcCxrQ
 owb+0JtOiSBLIlqy9Dk8c28W3VXk9rgTn8EzqyPlpslo698gcZ+v5wFSRyWFG+uX
 w4lFqBTkmBR/vLvnYU/aF2UOHBWsxjNn+L8XWuqcOgVChzVRkWkigqJkULjSTq6T
 0s0txudV4T6+DN3aTfIJI6160kl+4p7BI9TKpn9Y1PABWDIKEvYCSVdWUfYUZS/0
 li8cNU/lbE93Bmp59BUx1BfP1am/QVqcP+NX6EieARTB5thRXuLMcLgyz43budxa
 bnyS5cPkoD9kKFp+JGToemEGSixebUDrecXImLJiiLRr3CPDY74oVOYH5IwoFAbi
 VsUGMmVJhsBrvd0DIdEAooY/qRfSOGV9ICXpTJ+JbIS+19W0fSGFh2+4G3FZlCph
 8iVuxFb/7H1da/4+omiydvVIYvtrPtxNkBxnn6N8JvUz3WHHQvEp4FxiN3wgPblh
 NyKVzJ5j3r32VZ6E
 =vojt
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX9IQACgkQmmx57+YA
 GNnkYBAApu+D/x4GBliw94fgQc7ZdgXCyT7olpx5GhaMq7WuRE9AZtS7A+HgU8CP
 bXZm1aWoifAbTpnos4SMXxt0+ykvxDKrGXPxbM+/yYmM/VPbF0zBln6Qy+MhlYJz
 mi5OGKsjnAwVIzAuuQiZVv2+RQxIkZT5fkLg3bHDZUnexiHduDhrMB1mTiLHctPm
 tp6om28B2Vsbc3zlHnUo984qJ3mjQg/nm/s0lf7hCNsXV8r9IhM3YQl8uVRXan3s
 WdO7v4FKYX+gE87KTHs/iXoot28IXasi7w+qFTI4XwH+M2kcF/cWseptAyUefisi
 aHwg755zC4PEEFSru9CUGztbVfUNkoqOqC78f9kM6WtQS4509P1cmfa5+0f8jKm5
 zUGUbvAUVPKzwFqLrJI0SPGWvjFp3t1555WpkkZy/iu/OHw/ybuYBACSxOQGk1As
 xxj8CYOV9fvIagpM5EUTYoOVP8fkd38qYxiVzgwHSMpnp8kOSsAJb8JvnkGOpn9h
 qXaZvxXx2Iz+aW0JTudr4Vz++IcdAsDV00MQCbw1OvqH3AioJgv2rnpIIOL7Qa8r
 mhE62DJVfZcIhUZcgNmMEbBIENtB/21R29v2atMz6Sw5gop+xEycfBVbu38avWKn
 f5OaTMMxjrFAwX0T9v0aBJ6Ph0TYildxXwt+i6MPN+El/oZVDfo=
 =UZEm
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM DT updates for v6.3

This introduces support for Acer Iconia Talk S A1-724

The Samsung Galaxy Tab 4 10.1 gains ADSP and backlight support.

The Xperia Z2 Tablet gets charging enabled and the touchscreen is given
a little bit more time to start up.

APQ8064 and MSM8974 gains improvements in clock hierarchy. APQ8064
thermal sensor (tsens) driver gains per-censor calibration data.

Lastly a set of patches that improves DT binding compliance.

* tag 'qcom-dts-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (50 commits)
  ARM: dts: qcom: msm8226: add RPMCC node
  ARM: dts: qcom: apq8084: add clocks and clock-names to gcc device
  ARM: dts: qcom: align OPP table node name with DT schema
  ARM: dts: qcom: rename mdp nodes to display-controller
  ARM: dts: qcom-msm8974: rename mdss node to display-subsystem
  ARM: dts: qcom-msm8974: add SoC specific compat string to mdp5 node
  dt-bindings: qcom: Document samsung,gt58 and gt510
  dt-bindings: qcom: Document bindings for msm8916-samsung-j5x
  ARM: dts: qcom: use qcom,gsi-loader for IPA
  ARM: dts: qcom-apq8084: specify per-sensor calibration cells
  ARM: dts: qcom-msm8974: specify per-sensor calibration cells
  dt-bindings: arm: qcom: Document MSM8939 SoC binding
  ARM: dts: qcom: msm8974: add xo clock to rpm clock controller
  dt-bindings: qcom: Document msm8916-gplus-fl8005a
  dt-bindings: vendor-prefixes: Add GPLUS
  ARM: dts: qcom: apq8026-samsung-matisse-wifi: Add display backlight
  dt-bindings: arm: qcom: Add SM6115(P) and Lenovo Tab P11
  ARM: dts: qcom: add missing space before {
  dt-bindings: arm: qcom: add board-id/msm-id for MSM8956, SDM636 and SM4250
  dt-bindings: arm: qcom: Add zombie with NVMe
  ...

Link: https://lore.kernel.org/r/20230126174725.3681745-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:47:00 +01:00
Arnd Bergmann
8a74191c89 i.MX fixes for 6.2, round 2:
- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
 - Drop misused 'uart-has-rtscts' from imx8m-venice boards.
 - Fix USB host over-current polarity for imx7d-smegw01 board.
 - Fix a typo in i.MX8DXL sc_pwrkey property name.
 - Fix GPIO watchdog property for i.MX8MM eDM SBC board.
 - Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
 - Fix configuration of i.MX8MM pad UART1_DTE_RX.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXEG8UHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4l8Af7BrgeBF/mzk1QNKUth8x6e47QNNMw
 7yIou8vWd7Z6Qe1L5FsjyKBnjd7KGnpHZ38OfjQy/GQncnil2SNYBr+f9vG6TU/4
 uXn894o9LNsQ4pJJfz88/r/D+EAUkW3W2LXJFPyNJ1GP5Modb0mu1GfkUH4XvaO1
 E2iYJO5GyqwaTKcdioS951+uV4jJ7yDNwGREj0xcqlgrj2/X2v8yOws+O42M6E1V
 dco3lm4/Av0PFfyr8rthcfkTTGCA7eRETX3KklcAYVkJgMxbUZoRa00DgdPoC5Q4
 CCVxhu9V+RWH+1PkbmeC1eBL13YCIkz/qua8LM3pdEAjmLjy0EjgimqLCw==
 =b9Dk
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX8+sACgkQmmx57+YA
 GNntTQ/8DQkYFP/5zVhqcv1EK8wC3UZVhv67WYQuJg1GLBR1Yah7bq6RPqkom0UJ
 Gt3XxCozYbj70bdZgZqUGjzGUOz1JZdV3j8oNbqbZrtZj4irg/8ihh/tg+QNNi8k
 QpM/sfpROvBIOtlnf8LFpG92FQa8YCDSMXpEuSZhxstlBnL+4AU+Lqe9p3E0ui4+
 SBDIAwzuSuRKHSJGpVEPwQyDBlPb/Zzy5rHewy+oVlcI+0+sWBs6NvKpNUAY9C2k
 nJTrANMJyZhWT3XLpbxkNplH7kb/0ZNK4J+eJMNaRvMJL9wFPeC6LbuzUAki4Abr
 SqKcfvKLoi8OHpvEqW709vhaIGQcqF3XXF0MXTkDBqOvqBYdU6EpdxuO0XgYhr3H
 +FyxjfHijL49Jq9w6leyrH78os3/y2QZdctxHH6zHMTdwqRWcYK/9G1yN5AbPkqz
 FYt60XHvRtUqhDiUmMMHKF1XPaFcLGePSathV5VkSTWHRRH4m3oev9lvWMKNY68r
 0HxJITV19f87hqJqXddUEo5Ho0fShT6yfbNYu735tETI+O1tvcIb7MfzpG9a25Yi
 3wwsK7wFKTmuS1qRgDpkBtDNS0v0vruQGaWE7qkLa7M1Deq2HFmMI20q0Pk+HVzt
 NPWFL8Bxg4zu2v3Pdsf8eWteB2Ocrae/8vANNkNxSIJXkLkjrpI=
 =d/vV
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.2, round 2:

- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
- Drop misused 'uart-has-rtscts' from imx8m-venice boards.
- Fix USB host over-current polarity for imx7d-smegw01 board.
- Fix a typo in i.MX8DXL sc_pwrkey property name.
- Fix GPIO watchdog property for i.MX8MM eDM SBC board.
- Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
- Fix configuration of i.MX8MM pad UART1_DTE_RX.

* tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC

Link: https://lore.kernel.org/r/20230130003614.GP20713@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:44:27 +01:00
Arnd Bergmann
a6e6ceb28a - Fix error handling in RSB init
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCY9RQHwAKCRB0Ba7+DO8k
 kyfcAQDT1uj9/mCIR466oPBXLxi6ieBt7icvhHlLJn/cvWDJGQEAuwVDI6yVSdZl
 JhSt2PEbkAcCXF/oHG5Iq5E95wagkAU=
 =gZfi
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX870ACgkQmmx57+YA
 GNkITRAAsXTCAohQVZ72tQ1gc+nUxA4F9ICtuEYa4Teyw+VTD6SWg5Kr/+3r/WtC
 DQKt1nIWWD/FhKcPyr6U6rG1jcihWMC0R5sB0aSZljGJCJP1uvT8ZwYKOFnhvhkg
 2ZNWY8PDEu/l9GKxJjODplGOXnslJAD8F58UaAvTFBsjhW52XKmv52ozvftKZG9Z
 BeFp9LpgIOpZwxew1w/BeLzOR68oQUvM9CNHFMhWWw8sb8Fk6fT7tRJV296U3rw+
 OYQr7zyqncK+4+6UhquUQtIdJclWT7SZMBy5UfRdepKXEuA+iXfniL3eJ0/o0tq3
 vVTNlkNEa/V9BfR+UvJ8uhqfTI9f8r08/Me+jS8YYpX/RvOH9uFZFsz5Q9XKqsgl
 Jy/WYAB2K24a6rvhSrVifNKDmlO4Rt5m/oUHDb2TGepmAWFkle/by7cUqAPcqLab
 D91wEYpcPR9kMiJSDhKtot5XJpWBwOsAeiMQN//E2n2jFhEfq890D9+AhQhmGyyY
 isOKdG2ar6qAMTT94x5S0j+ZbPlBzG6vQxS4EohlMX3dVdW3FzZGoYg4TMEj9wc0
 5kI2a+xiiyW80V+6M+cADNEpWn21nH5lcz3atuzcWvW+v59fJbro5BhhhSSbiwv0
 84aY1iGTfeM1Rx389cAhiCg4FdZohvSlF8dFzThHsl2bPq96gR4=
 =9bgj
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

- Fix error handling in RSB init

* tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

Link: https://lore.kernel.org/r/Y9RWcDdO0nj98KVj@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:43:41 +01:00
Krzysztof Kozlowski
d2591298b9
MAINTAINERS: amd: drop inactive Brijesh Singh
Emails to Brijesh Singh bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230127105935.99174-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:43:18 +01:00
Ulf Hansson
4a6a7bc21d block: Default to use cgroup support for BFQ
Assuming that both Kconfig options, BLK_CGROUP and IOSCHED_BFQ are set, we
most likely want cgroup support for BFQ too (BFQ_GROUP_IOSCHED), so let's
make it default y.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230130121240.159456-1-ulf.hansson@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-30 09:42:42 -07:00
Uwe Kleine-König
2781f8e920 pwm: lp3943: Drop unused i2c include
lp3943 is a platform driver that doesn't use any symbol provided in
<linux/i2c.h>. So drop the include.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30 17:20:30 +01:00
Pali Rohár
b56265257d mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
It is possible that current chip->ecc.engine_type value does not match to
configured HW value (if HW ECC checking and generating is enabled or not).

This can happen with old U-Boot bootloader version which either does not
initialize NAND (and let it in some default unusable state) or initialize
NAND with different parameters than what is specified in kernel DTS file.

So if kernel chose to use some chip->ecc.engine_type settings (e.g. from
DTS file) then do not depend on bootloader HW configuration and configures
HW ECC settings according to chip->ecc.engine_type value.

BR_DECC must be set to BR_DECC_CHK_GEN when HW is doing ECC (both
generating and checking), or to BR_DECC_OFF when HW is not doing ECC.

This change fixes usage of SW ECC support in case bootloader explicitly
enabled HW ECC support and kernel DTS file has specified to use SW ECC.
(Of course this works only in case when NAND is not a boot device and both
bootloader and kernel are loaded from different location, e.g. FLASH NOR.)

Fixes: f6424c22aa ("mtd: rawnand: fsl_elbc: Make SW ECC work")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230128134111.32559-1-pali@kernel.org
2023-01-30 17:17:42 +01:00
Miquel Raynal
8338304c27 mac802154: Avoid superfluous endianness handling
When compiling scan.c with C=1, Sparse complains with:

   sparse:     expected unsigned short [usertype] val
   sparse:     got restricted __le16 [usertype] pan_id
   sparse: sparse: cast from restricted __le16

   sparse:     expected unsigned long long [usertype] val
   sparse:     got restricted __le64 [usertype] extended_addr
   sparse: sparse: cast from restricted __le64

The tool is right, both pan_id and extended_addr already are rightfully
defined as being __le16 and __le64 on both sides of the operations and
do not require extra endianness handling.

Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230130154306.114265-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-01-30 17:16:28 +01:00
Mario Kicherer
724ef01569 mtd: spinand: Add support for AllianceMemory AS5F34G04SND
Add support for AllianceMemory AS5F34G04SND SPI NAND flash

Datasheet:
- https://www.alliancememory.com/wp-content/uploads/pdf/flash/AllianceMemory_SPI_NAND_Flash_July2020_Rev1.0.pdf

Signed-off-by: Mario Kicherer <dev@kicherer.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230126144050.2656358-1-dev@kicherer.org
2023-01-30 17:16:28 +01:00
Arnd Bergmann
050bbd6e58 Amlogic Drivers changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
 - Addition of NNA power domain for A311D SoC
 - meson_sm.txt  conversionto dt-schema
 - mark amlogic,meson-gx-pwrc bindings as deprecated
 - fix of meson_sm driver by using NULL instead of 0
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmPXxmwACgkQd9zb2sjI
 SdFUhg/9FVN0zGzhu/jtUgJ0gi1/c651aF4rojhq3H6xNGMGHAvFuzP2s2cZMUBd
 VG3E2hEM8AhYo0HZF4IVABZ7SlzY2YsimHR0ZoOrE6X719KuEFlYCV4HWqs4OyV2
 NNR5A4m1N4qCNBH7aSpdgN4JeBqRZUycVnRIAAM2RpqXHQIRyJCja2QLL8LULg8w
 fuepmu29Sb/Yi7GA4yIJTUkCKtijAg+q7P0kuiTpE5od6Vm43n9ITzIAHVJXbRlU
 4Lg6/19j1UflZA8t8CXnn8+nySa/E/owOA82YrY2m+/SG9ZMm97n9syj17weTuyJ
 UPzjKnKnqRYQIcOlfxIBH9NvC46/TJJSGkPQ8lwCid8s8kq29KXiTuIAMXNPrfAB
 KTrQRVjb92aMR5+cwiEe810ViyU27L9TIkqy2nvj7dEaa36p9W1D1QULgZiDccPj
 vgPFSu1SiGO549PxeXnIMKTXh5T/06mXdBjKzSFamYiBr7Y8gc606YNW9poPY12s
 yLwW7UiqG4q3CC9tLvFeX69JSPvIQDxZvVtlppHN0pmzP0U7iMy9KxUu93iK6xtO
 eWIL63jsZTF3RR+xbawiJtBQxMMPvfxzELJCWhISdYvwK9OekATDRd5aqovdyWSU
 71HQBgaBbCHcyfmaqzkMjdBJm/rOJiDJvJhIl3Pd8BOg8bLgZ+M=
 =+uBi
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX6/MACgkQmmx57+YA
 GNmH3g/9GBO61b8NJMndoPrYXFKCAL7Zf9tej/d5pjILi97PVV42nFRxXKY3xJaS
 UEXgy/XRjR0PWYl65d6rzh9Moq95jd0HLq5gBOkeBhsKqfFXX9nJGXf9BT4IkJfj
 OBvcpB2BxbtQouuo3Qj6w8WSV7nXYZSCrQIXrDfqxkn0LkZSGBBp6VPtlpe1An4i
 CTOgRQ7iNyofsG/VUG1ySqubhNznUMkpydiy7T6mk9/JIaz+1s4b92ybpiHGyknB
 YYCBv8LXi+/z/s/SxOLcvfRJN5mPpLjwfFX705mel7+GY0JTDG97UJSAUiB2if6q
 CazVP9fkUEP+fbRn+o9K/HbfpkDchlBYnaij0Ai+mGHGJUWCs746GR8+oTedvzvp
 ehRVXfcY4eGyrhYA6IoVx8WxX0m8xeyikwkWsEd6wwA5y661ARKLnddLIdk6byEZ
 NvGSk3NHKc/dt6SOXHFG9HhF1dTOFVoTwXjNu5yOvqfgregwZf08j/vk2n5V/14t
 rmn1F6FJhuyizFlAfMYlzr4U9QfBZ3fe4drYDPl0NbYBlw6jR0QJ8gofTYi4f5S6
 HTgYxbsQ8U54d2LCJlkbLLDw9egxC3GaqMznTj7QcwDv8djHJqGyxaKvTKwZri2p
 p0DtKPdqHYkyjj/qF+chk8ZLM4/Ik1l8olwbyptyvosHhBMWwFM=
 =1+2i
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers

Amlogic Drivers changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- Addition of NNA power domain for A311D SoC
- meson_sm.txt  conversionto dt-schema
- mark amlogic,meson-gx-pwrc bindings as deprecated
- fix of meson_sm driver by using NULL instead of 0

* tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  firmware: meson_sm: stop using 0 as NULL pointer
  dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated
  dt-bindings: firmware: convert meson_sm.txt to dt-schema
  soc: amlogic: meson-pwrc: Add NNA power domain for A311D
  dt-bindings: power: Add G12A NNA power domain
  dt-bindings: reset: meson-g12a: Add missing NNA reset

Link: https://lore.kernel.org/r/ec9552d8-96df-a677-ab94-9723f5c30f1c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:10:27 +01:00
Arnd Bergmann
e0530b9ea7 i.MX drivers change for 6.3:
- A couple of cleanups to drop device_driver owner setting from i.MX93
   PD and SRC driver.
 - A series from Lucas Stach to add high performance PLL clock support
   for imx8mp-blk-ctrl driver.
 - A couple of changes to set LCDIF panic read hurry level for i.MX8M
   blk-ctrl drivers.
 - Use devm_platform_get_and_ioremap_resource() for imx-weim bus driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXFdYUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM61cAf/UKUhyKCvkT3Da5CsUXUZLHNFYr3W
 bsrgNfn5Ffw+0DqiwiZkvA/OMEZBcck4YIQEqw4DVRYhozMNCyvOODvmWpK4Q67+
 gcvWNs0o4hsJ0kAuGJUjg8QEwSSgf8ikX2KK2wMptWtNPu/z2sBo+fvQ6RTAt1un
 mt63yO4v3/i8IVtCWEXQZqLcR5gVpSC6xigjRtELXkBn+tHqPBpuwUCSzrKle6XT
 qn8k8AB87qu5onaFupd4/ZEIfkG05e8jyMqPAFd7YjMA6taC6q5zJJdOdV6N2uJq
 TADXu46u2STI86faGLoqqqpZ3iUdSMOhwu7Iu+vpI6Lx1vyZvZcZFJ0KhA==
 =ghuX
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX67gACgkQmmx57+YA
 GNnXWw//ZSu+ASCEP9gzi0a0QakKC2mNWeohXcEPr1O+Pr5OuYmkhQ+cqpz004Tg
 FzVpSN5Lv+WC0UNeE4wRu0Evuxo7DjVy/7hc03xzI1plq42D8Vq2FXFv5l4jpIBQ
 cYqgFpeNCcjHQXL2OVkjp+P30nvqC8LaXAUi6E0S+k2EOqwM6qq/thVDngnDjg98
 NygZLmUdrtY0SVtx6QR9iP3ZfTqo/fyDUcL6bTfx2lTBkqRp23vFMxsGSkp6Bpwy
 ovLWwdCWOGc/sCV2rOBgqh12DZBs+0GATOiO9/RPmUZC1c5byUpbO/5STxbbdrIE
 DYSG7e8yOndjHXfNb94mdA2kaC+J3Eyoa8WXohTF+udyughH2Xun33NX6pVp3F4z
 hYjMBpqGW6ThIsuGSyqYDDDZj3KVtqBToMBZrQhbBam4Qvh/2IO89Q56l/Ni+N8n
 vgce0f/JIeN+QotQdHD9yt7fsSmb9wYSCecyppTl+cNdmAKSYugGqMgytYFm3XnK
 Ed8Ds5eucbHvnow0KxxKsq9EV4eMPBL0bkufBqhSMXs0I4EHnF19n/5O1zr4VinI
 2AhHL2SF/OAxhMPB7zKIyXnRdTXcuRKnQY7MS2Q5G4hucfg/uRT9psrv35Gbb37q
 RQ2zRmM90fnCBT4g4v+jLtXp9LMScLz/8XG6XjtHqVG3ls2/5dc=
 =+Uo3
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers

i.MX drivers change for 6.3:

- A couple of cleanups to drop device_driver owner setting from i.MX93
  PD and SRC driver.
- A series from Lucas Stach to add high performance PLL clock support
  for imx8mp-blk-ctrl driver.
- A couple of changes to set LCDIF panic read hurry level for i.MX8M
  blk-ctrl drivers.
- Use devm_platform_get_and_ioremap_resource() for imx-weim bus driver.

* tag 'imx-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: imx8mp-blk-ctrl: set HDMI LCDIF panic read hurry level
  soc: imx: imx93-src: No need to set device_driver owner
  soc: imx: imx93-pd: No need to set device_driver owner
  soc: imx: imx8m-blk-ctrl: set LCDIF panic read hurry level
  soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock
  soc: imx: imx8mp-blk-ctrl: add instance specific probe function
  soc: imx: add Kconfig symbols for blk-ctrl drivers
  bus: imx-weim: use devm_platform_get_and_ioremap_resource()

Link: https://lore.kernel.org/r/20230130023947.11780-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 17:09:27 +01:00
Rob Herring
c705e63a32 dt-bindings: mtd: partitions: Fix partition node name pattern
The 'partition' node name pattern is missing start and end anchors, so
anything is allowed before or after the regex pattern. There's no in tree
users needing that, so add anchors to the pattern.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230120020454.3225796-1-robh@kernel.org
2023-01-30 17:03:46 +01:00
Stephen Rothwell
b7810ea80f driver core: fixup for "driver core: make struct bus_type.uevent() take a const *"
After merging the driver-core tree, today's linux-next build (powerpc
ppc64_defconfig) failed like this:

arch/powerpc/platforms/ps3/system-bus.c:472:19: error: initialization of 'int (*)(const struct device *, struct kobj_uevent_env *)' from incompatible pointer type 'int (*)(struct device *, struct kobj_uevent_env *)' [-Werror=incompatible-pointer-types]
  472 |         .uevent = ps3_system_bus_uevent,
      |                   ^~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/ps3/system-bus.c:472:19: note: (near initialization for 'ps3_system_bus_type.uevent')
arch/powerpc/platforms/pseries/ibmebus.c:436:22: error: initialization of 'int (*)(const struct device *, struct kobj_uevent_env *)' from incompatible pointer type 'int (*)(struct device *, struct kobj_uevent_env *)' [-Werror=incompatible-pointer-types]
  436 |         .uevent    = ibmebus_bus_modalias,
      |                      ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/ibmebus.c:436:22: note: (near initialization for 'ibmebus_bus_type.uevent')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2a81ada32f ("driver core: make struct bus_type.uevent() take a const *")
Link: https://lore.kernel.org/r/20230130152818.03c00ea3@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-30 17:02:03 +01:00
Damien Le Moal
63ba51db24 PCI: Avoid FLR for AMD FCH AHCI adapters
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:

  ata4: softreset failed (1st FIS failed)
  ...
  ata4.00: qc timeout after 5000 msecs (cmd 0xec)
  ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)

Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:

  echo "bus" > /sys/bus/pci/devices/<ID>/reset_method

gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.

Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.

Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
2023-01-30 09:59:15 -06:00
Randy Dunlap
faffb0831a Documentation: firmware-guide/ACPI: correct spelling
Correct spelling problems for Documentation/firmware-guide/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 16:50:44 +01:00
Hans de Goede
7de6c3fb6d ACPI: PMIC: Add comments with DSDT power opregion field names
The DSDTs of CHT devices using the Dollar Cove TI PMIC, all use
LDO1 - LDO14 names for the DSDT power opregion field names.

Add comments with these fields to make it easier to see which PMIC
registers are being set by ACPI code using these.

Note that LDO4 is missing and the mapped registers jump from 0x43
to 0x45 to match. This matches with how the fields are declared
in the DSDT where LDO4 is skipped too. Note there is no hole in
the field addresses, LDO4 is simply just not defined on either side.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 16:47:13 +01:00
AngeloGioacchino Del Regno
3e98855ca0 dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
This converts pwm-mediatek.txt to mediatek,mt2712-pwm.yaml schema;
while at it, the clock names were clarified as previously they were
documented as "pwmX-Y", but valid names are "pwmN" only.
Also, the example was changed to use "mediatek,mt2712-pwm" instead
for consistency with the schema filename.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30 16:43:31 +01:00
Armin Wolf
91507d25a6 ACPI: battery: Increase maximum string length
On the Dell Inspiron 3505, the battery model name
is represented as a hex string containing seven numbers,
causing it to be larger than the current maximum string
length (32).
Increase this length to 64 to avoid truncating the string
in such cases. Also introduce a common define for the length.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 16:43:25 +01:00
Armin Wolf
a1a32ded28 ACPI: battery: Fix buffer overread if not NUL-terminated
If a buffer containing ASCII characters is not NUL-terminated
(which is perfectly legal according to the ACPI specification),
the ACPI battery driver might not honor its length.
Fix this by limiting the amount of data to be copied to
the buffer length while also using strscpy() to make sure
that the resulting string is always NUL-terminated.
Also replace strncpy() vs strscpy().

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 16:43:25 +01:00
Fabrice Gasnier
3066bc2d58 pwm: stm32-lp: fix the check on arr and cmp registers update
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the
register isn't correctly updated.
So ensure both status bits are set before clearing them.

Fixes: e70a540b4e ("pwm: Add STM32 LPTimer PWM driver")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30 16:42:45 +01:00
Geert Uytterhoeven
b3c650ad9b pwm: Move pwm_capture() dummy to restore order
Move the dummy pwm_capture(), to make the declaration order of all
dummies to match the declaration order of the real functions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30 16:42:45 +01:00
Emil Renner Berthing
334c7b13d3 pwm: sifive: Always let the first pwm_apply_state succeed
Commit 2cfe9bbec5 added support for the
RGB and green PWM controlled LEDs on the HiFive Unmatched board
managed by the leds-pwm-multicolor and leds-pwm drivers respectively.
All three colours of the RGB LED and the green LED run from different
lines of the same PWM, but with the same period so this works fine when
the LED drivers are loaded one after the other.

Unfortunately it does expose a race in the PWM driver when both LED
drivers are loaded at roughly the same time. Here is an example:

  |          Thread A           |          Thread B           |
  |  led_pwm_mc_probe           |  led_pwm_probe              |
  |    devm_fwnode_pwm_get      |                             |
  |      pwm_sifive_request     |                             |
  |        ddata->user_count++  |                             |
  |                             |    devm_fwnode_pwm_get      |
  |                             |      pwm_sifive_request     |
  |                             |        ddata->user_count++  |
  |         ...                 |          ...                |
  |    pwm_state_apply          |    pwm_state_apply          |
  |      pwm_sifive_apply       |      pwm_sifive_apply       |

Now both calls to pwm_sifive_apply will see that ddata->approx_period,
initially 0, is different from the requested period and the clock needs
to be updated. But since ddata->user_count >= 2 both calls will fail
with -EBUSY, which will then cause both LED drivers to fail to probe.

Fix it by letting the first call to pwm_sifive_apply update the clock
even when ddata->user_count != 1.

Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-01-30 16:42:45 +01:00
Michael Schmitz
be6c50d315 selftests/seccomp: Add m68k support
Add m68k seccomp definitions to seccomp_bpf self test code.

Tested on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-4-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-01-30 16:40:15 +01:00
Michael Schmitz
6baaade155 m68k: Add kernel seccomp support
Add secure_computing() call to syscall_trace_enter to actually
filter system calls.

Add necessary arch Kconfig options, define TIF_SECCOMP trace
flag and provide basic seccomp filter support in asm/syscall.h

syscall_get_nr currently uses the syscall nr stored in orig_d0
because we change d0 to a default return code before starting a
syscall trace. This may be inconsistent with syscall_rollback
copying orig_d0 to d0 (which we never check upon return from
trace). We use d0 for the return code from syscall_trace_enter
in entry.S currently, and could perhaps expand that to store
a new syscall number returned by the seccomp filter before
executing the syscall. This clearly needs some discussion.

seccomp_bpf self test on ARAnyM passes 81 out of 94 tests.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-3-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-01-30 16:40:15 +01:00
Michael Schmitz
2ca8a1de44 m68k: Check syscall_trace_enter() return code
Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).

No regression seen in testing with strace on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-01-30 16:40:15 +01:00
Geert Uytterhoeven
65a1601609 m68k: defconfig: Update defconfigs for v6.2-rc3
- Drop CONFIG_NFT_OBJREF=m (removed in commit d037abc241
    ("netfilter: nft_objref: make it builtin")),
  - Drop CONFIG_TEST_STRSCPY=m (replaced by auto-modular
    CONFIG_STRSCPY_KUNIT_TEST in commit 41eefc46a3 ("string:
    Convert strscpy() self-test to KUnit")),
  - Drop CONFIG_TEST_SIPHASH=m (replaced by auto-modular
    CONFIG_SIPHASH_KUNIT_TEST in commit fb3d88ab35 ("siphash:
    Convert selftest to KUnit")).

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/fdd3b827ebc5abea6c295df4121048a6a03b698a.1672654705.git.geert@linux-m68k.org
Link: https://lore.kernel.org/r/6c4589bc56ffba0f923a7361262397f6c32a3dc1.1673255008.git.geert@linux-m68k.org
2023-01-30 16:40:15 +01:00
Shuai Xue
53fc7e80f3 ACPI: APEI: EINJ: Limit error type to 32-bit width
The bit map of error types to inject is 32-bit width [1].

Add parameter check to reflect the fact.

[1] ACPI Specification 6.4, Section 18.6.4. Error Types

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30 16:40:05 +01:00
Xin Gao
40202cca4b m68k: q40: Do not initialise statics to 0
Remove initialization to zero of static variables.

Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220718105553.6529-1-gaoxin@cdjrlc.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-01-30 16:39:43 +01:00
Rob Clark
dbd7a2a941 PM / devfreq: Fix build issues with devfreq disabled
The existing no-op shims for when PM_DEVFREQ (or an individual governor)
only do half the job.  The governor specific config/tuning structs need
to be available to avoid compile errors in drivers using devfreq.

Fixes: 6563f60f14 ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Patchwork: https://patchwork.freedesktop.org/patch/519801/
Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com
2023-01-30 07:37:40 -08:00
Mark Brown
68efe8f7a1 KVM: selftests: Fix build of rseq test
The KVM rseq test is failing to build in -next due to a commit merged
from the tip tree which adds a wrapper for sys_getcpu() to the rseq
kselftests, conflicting with the wrapper already included in the KVM
selftest:

rseq_test.c:48:13: error: conflicting types for 'sys_getcpu'
   48 | static void sys_getcpu(unsigned *cpu)
          |             ^~~~~~~~~~
In file included from rseq_test.c:23:
../rseq/rseq.c:82:12: note: previous definition of 'sys_getcpu' was here
   82 | static int sys_getcpu(unsigned *cpu, unsigned *node)
          |            ^~~~~~~~~~

Fix this by removing the local wrapper and moving the result check up to
the caller.

Fixes: 99babd04b2 ("selftests/rseq: Implement rseq numa node id field selftest")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20230106-fix-kvm-rseq-build-v1-1-b704d9831d02@kernel.org
2023-01-30 16:29:45 +01:00
Arnd Bergmann
938370c668 This pull request contains Broadcom ARM/ARM64 SoCs drivers updates for
6.3, please pull the following:
 
 - Uwe removes an empty platform driver remove function in the
   bcm2835-power driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmPVeT0ACgkQh9CWnEQH
 BwQ9SxAA3RPIiscQzb139Jf8+FGANN9NJuNJfWUmFF4TX/r+XhrGO9J5R6thPAoJ
 e7AXa8k6sgQqlTPOTA4LW691JMQPc1AeHsTkP4vd5Hu0GM6ocDgMLnGejm8EoBwn
 KafFqYUUOa6ffb2S1pNZIncLsJ+o/xWMn4jzgMww0edB9wx/5ODLePNnjXJpe2a1
 3AESPrS2MtHZS/I/K9BEtdoMio3d0J6hbA7p8g2ZbfIoMJUpI4XIpV+zhOyrNkPN
 68QDsj6HeMkLupdWx3oMi0pN/t31IoC8YA8oZ5SN3eBr90oVQe3WaBEEMZjCHq6t
 cu40Kshf+eGnebjAknbBzErkbuNjV6WBE0xnC+1Q824zIM/XtTE0m2tSIO37edy6
 PWi4u+FfdNpyjqnC71wS3TWCmcaH3CQkc5Hz+OGKvNonnQgtm2qoVe4YrR4K+ayX
 bGZQoGYwO1C+hWBpT1IYewW+fNDnIfskK1y67X/87uk41pmyFMF44ccVh/S5oUhP
 q0Pe7wLfMLvATnnj1WDvjspcuXAeCaykhx9ge7Yo7uE0OSxMgnjan8g6SWXmEPa7
 vtJ2V0n0aNMDjTYD3xpw0ypUMntu3hG/uH5tS607eF0LJfhyoAsPzi/hzRmm8BYE
 SNu9KBeYjmaAYgoSnkIODCAPokYwC3BRgNFphYmJ4T/aCuSpbsY=
 =pZ/Q
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX4NEACgkQmmx57+YA
 GNnniA/+IxEh5/6YJ+Xj3G2OcPQV3396Iif/Q6rMKTCto4MzjXp1W9q0XAs95qUI
 l2IJoe0oMOXk61pofx+SWWXWh90c9VLzhFdp+fpAM8sOZkRHaXSdgXy+zjL3+Rf3
 ARNOEcCchdLPzdvjp9ttF2sNQdXnVO52TgrL2x63KnSLQbkxQNsoFC1tCUgzQ0uv
 JAtt+hIDaQFdjJ3CXrFou15iGOaQE3W6J0kq/0t/E9FLjubwdtBdUQDzQhDccWvz
 /ay/W8/nNwc4xMdueSi84dP97RKM4uTFTEFvE/P+8m1lJi8AEzN0cK/Qzl9luasp
 92TyH1Cp8EbGyjBImRmp2ilJLwLMljZNlkTaq9+R8hiZ3rEJh346FFNwisJm4zyJ
 ZCp82mB3faRk7ahGtU6p4S2XaO6KQHss/JCUnxsCi+87iJp1Tz5ZSaEGNmdlzU9L
 s3aKmCeVml2vaEmffsYUNl9u8dXmrHxZQKb65TtATCcswSliI0kjlWzQaD9arOew
 6rSX/10xHpi/JoDg7kV9r01rxt/gwdZ7gfmRm6obKxGOxhGqDRP8HmujG5rRRmtS
 3sk9CrXbLVoQaOICj24h5Xl0PqZU+e10y/OnYP9qiUxPzu52HsjLfQSufCnB/lFL
 3/rEHTdVBwxXNcj0tLkobhfuFeKzRGqCo/2OuM9KBJkqXgFThFA=
 =nfdV
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-6.3/drivers' of https://github.com/Broadcom/stblinux into soc/drivers

This pull request contains Broadcom ARM/ARM64 SoCs drivers updates for
6.3, please pull the following:

- Uwe removes an empty platform driver remove function in the
  bcm2835-power driver

* tag 'arm-soc/for-6.3/drivers' of https://github.com/Broadcom/stblinux:
  soc: bcm: bcm2835-power: Drop empty platform remove function

Link: https://lore.kernel.org/r/20230128193844.1628888-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 16:22:57 +01:00
Arnd Bergmann
d5d39b46f0 - introduce Allwinner PPU driver
- limit iteration in sram debugfs
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCY9RTJgAKCRB0Ba7+DO8k
 kx95AP0X7OJAPv+c2E+LUkgR+GzOHWSefZm600tteEgcC3SBVQEAg3g/QyLk18SM
 LkZdm5++fSkxX0EwSrMthUq8P1CU5w4=
 =CS1P
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX3k0ACgkQmmx57+YA
 GNnL/Q//WrC02t6Kl+L4Pk9rWJS5pgdM2dUb3XAfR8/vp9PRW5yuPnxT41sv2dP4
 uBMF1t6FKtJimabB6DFD8mZeiW3JiamEH/PSd0Qo11NX8pPmJhDYXYTUdy6fTHhB
 JMFK+piOkgVPiv55ROgXCEvTDd1wOedC3SumEMo2bZkpFRGcylYbb/k/MJbjktjA
 oC2tIGeDV7BxKjl7NxyLwfV7+TqswVd6OvacWKgUZuGxR1laHitDM6ggv9YvA1K4
 w5CE5xaHoBXhtway0DdrAfURzhldn59Q6UdUvcHuYfjt6Di7RD431jJdQnlRTP9G
 WaUZYjIrTb2izyz5AWcDLI2O3Gzg8eBhoINLjSw7aaScQnPEB1g69M+nhQyOfh/w
 gC8M2ti7T7uX4HbAuhdOnfBtf6qaG6LluDlOClPTBmWcZvpKTzcqlx3ZNjMUfVGa
 z+Ft5ui8pdQmxtHUPt1xH6AFk5GMkgnSGTI5Kc302EntetPxG7UMgq3km4QfCBY6
 6x/tF7GxgfYIbDGwr6qXpe5g8Oyuo7zqxKmChRiQjmCudKdG+rqdQfGYlvNdBtHq
 YJABQEb/+DDu+75tfURS0CY6eiMRr3NQUFgLExZv/hL2mN56j4IrALB39TRVwEON
 WKSFBq71G/BFWvNxIc2YsdR8+MechEZW2KmY1F2n6OXy+pJvo9I=
 =nXYr
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers

- introduce Allwinner PPU driver
- limit iteration in sram debugfs

* tag 'sunxi-drivers-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: Add Allwinner D1 PPU driver
  dt-bindings: power: Add Allwinner D1 PPU
  soc: sunxi: sram: Only iterate over SRAM children

Link: https://lore.kernel.org/r/Y9RXXATRNqEv0GJT@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 16:12:12 +01:00
Arnd Bergmann
80dea24a49 Renesas driver updates for v6.3 (take two)
- Add support for the Renesas RZ/V2M External Power Sequence
     Controller (PWC).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9ORbQAKCRCKwlD9ZEnx
 cJ6sAP40TCkcVZHRPyaWKovBnDOcPf3CIchqdAdLqa5sZX6ChAEA5GToDJPvPlbF
 DVGchT/gQ6nwb0+9NO9K3v41Zu/33wA=
 =Vv/R
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX3eYACgkQmmx57+YA
 GNn1qQ//TDG538lBsXLZ8iClv7pusBWzdEY7Bff2l438fVCxxNox7IEaUOQaHDEN
 ccrZKWHCblzIeCEw+571eynTC1tvnTjdGYUGoncljP+9MA4E9W6sKKwMZjoMDcRU
 OuI7l5JYgYD0QKdgh9AAawg2sOojNvAz8efRofFjjwQ64BcXpG2+YMr4rcwKDE8d
 ARH4WkmOzayqWoxiQq3pp3S7w0XhNEi06rkyNkDTPufFByqYt4XH8Tyn8PwkQfye
 ioMHQ6HlMbqp2QLyUj2+5TXXdjY1pTjJnptS7xGc0TZbs9QDtl9I+FJZWSALpXK7
 oCvt4+HP35L6PQ2xnUg1Yrgkeg6/bn4JmQjh4+piHHwKQBHQiIKsR5Xt4df29eXr
 UVliE1GSDt4EuPVa7Hon+qzlG5a/7dtTfMczlxMtHy9V6ZX8gxgM6yydF9Om1WKs
 hpDzmJjFzz4E7g6N/s5AAvVlmX0PFOU+V7CEF7pqW4eKfPsHchRJDvfaUOcchfa7
 SgXj7n8Y/eWOEhHgZtxKphO7L7FhrLd/bIyfFv4JIJu1bIOZi0NydWDyFnm8G3ZF
 OM2F8Z4cp2ZumeioiAr9lq3aGOK8BtZ+mHzShAtVCBTypGtJEuLYOtRtg/cwbbl5
 aZICuRal/mSVrRvxjyhPWpSyHXo3QX8MejNG45UL7HSfcKhPirU=
 =LSBp
 -----END PGP SIGNATURE-----

Merge tag 'renesas-drivers-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.3 (take two)

  - Add support for the Renesas RZ/V2M External Power Sequence
    Controller (PWC).

* tag 'renesas-drivers-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Add PWC support for RZ/V2M

Link: https://lore.kernel.org/r/cover.1674815095.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 16:10:29 +01:00
Arnd Bergmann
75dae633c9 RISC-V SoC drivers for v6.3-mw0
It's all StarFive stuff this time:
 Their new JH7110 SoC uses a SiFive core complex, and therefore a
 SiFive cache controller too. That needed a compatible added to both the
 binding and driver.
 The JH7110 also has power domains, which are supported by a new driver
 and a corresponding dt-binding.
 
 Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCY9A3iwAKCRB4tDGHoIJi
 0qE4AQDPCcoarT/vLZ28H4wBHPUBxnmU1rut3uNM4f1lIqK0PgD+N6N3xGajmVy0
 UzD8/qg2gua94rx/2dmE4PWvun+newk=
 =Lqa0
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPX3XUACgkQmmx57+YA
 GNmTrw//amIzDDsnOBOblQMV0yJCpOgj/r6azaYdb2M7a++3ysdUVDnqz9E0VlkE
 YusfPAg//Fc/6/r6nV6CiCodoprC5g8dkrhFvLUllLnvSQP9Fz/BB99o93aITGUj
 gqRubCpEnVbsDkinUKDKw8A/RSkMhxsTN3d+JhuZi9RtISUiiNpAGJavut5AsLZS
 r7ADgNQppcHE02ujdLNszYOZdQgOh00ewKtDWw6RsBGcybTRSuiGnANtaEufvl+W
 pROapERp/ca8o6odUXaoP7YLFDAHtCbgREdzRtaOtO0HEcP8BKawpJvDHVtTScaQ
 h5o//DGHKBRDYOVykzAlPdjLXQqvN2vb8Li2SO1DdHvD9Mdjqg0XFKUUIv/7kVu8
 uIpat254aGujDsBX+1y+cePSh7UJvjv6KHQz3gVIpfPCcceKXyR7zTrMobC5d2/b
 ALBgDXhzfy00v/CFKYjBSIskLaLTSx9fz5CRan2xbpo0TpB8o7hb/nCcRJkGOGUW
 1LojbM+vdaX/isqxNFAfowCDfBwyLaygvL8HCjT0IKuZ1End9GBuiYDMDfssw1M0
 cDepFYy5e2VOfKVhexC2ZTL5n7RDpFy3lVSrVD4gFERZg7iH2UtU4QHHbOujNxe9
 yBHIaEFtKJy7244XM3ug8wP6eRDhjo3OFJkMrecdCOQVx3knAUU=
 =Dfx0
 -----END PGP SIGNATURE-----

Merge tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers

RISC-V SoC drivers for v6.3-mw0

It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  soc: starfive: Add StarFive JH71XX pmu driver
  dt-bindings: power: Add starfive,jh7110-pmu
  soc: sifive: ccache: Add StarFive JH7110 support
  dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC

Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30 16:08:36 +01:00
Lorenzo Pieralisi
581e43ef5d MAINTAINERS: Promote Krzysztof to PCI controller maintainer
Krzysztof has contributed significantly to the PCI controller subsystem
recently through reviews, tooling and submissions.

Update the MAINTAINERS file to grant him the role he deserves.

Link: https://lore.kernel.org/r/20230130100850.24994-1-lpieralisi@kernel.org
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
2023-01-30 09:07:15 -06:00
Andy Shevchenko
eed5a3bfaf gpiolib: of: Move enum of_gpio_flags to its only user
GPIO library for OF is the only user for enum of_gpio_flags.
Move it there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:31 +01:00
Uwe Kleine-König
3101b1e4ba gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
To check if a certain function (here e.g. pwmchip_add()) can be called
IS_REACHABLE is the better check. The relevant difference to IS_ENABLED
is that IS_REACHABLE evaluates to 0 if the current code is builtin but the
checked symbol is =m and so must not be used.

Today there is no practical impact as CONFIG_PWM is a bool.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:31 +01:00
Andy Shevchenko
fd648e1010 gpio: zevio: Add missing header
The commit 899f6a9c4364 ("gpio: zevio: Use proper headers and drop
OF_GPIO dependency") missed one header this driver depends on. Add it.

Fixes: 899f6a9c4364 ("gpio: zevio: Use proper headers and drop OF_GPIO dependency")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:31 +01:00
Linus Walleij
e3863fa123 gpio: Get rid of gpio_to_chip()
The gpio_to_chip() function refers to the global GPIO numberspace
which is a problem we want to get rid of. Get this function out
of the header and open code it into gpiolib with appropriate FIXME
notices so no new users appear in the kernel.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
51435300df gpio: pcf857x: Drop unneeded explicit casting
The s32 is compatible with int, no need to cast.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
e2d1812116 gpio: pcf857x: Make use of device properties
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
91a0192e90 gpio: pcf857x: Get rid of legacy platform data
Platform data is a legacy interface to supply device properties
to the driver. In this case we don't have in-kernel users for it.
Moreover it uses plain GPIO numbers which is no-no for a new code.

Just remove it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
b0047b90db gpio: rockchip: Do not mention legacy API in the code
Replace mentioning of legacy API by the latest one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
a060dc6620 gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
9c8224d04b gpio: zevio: Use proper headers and drop OF_GPIO dependency
The driver doesn't depend on the OF_GPIO to be compiled. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
a25d1dfdfc gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Andy Shevchenko
13e856b8df gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Chunyan Zhang
3c0c7b1dc6 dt-bindings: gpio: Add compatible string for Unisoc UMS512
UMS512 use the same GPIO and EIC controller with SC9860.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00
Chunyan Zhang
bf26a472a2 dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
Convert the Unisoc EIC controller binding to DT schema format.
Update the maxItems of 'reg' property, since the current gpio-eic-sprd
driver supports 3 reg items. Also removed a few similar examples.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-30 15:55:30 +01:00