Commit graph

1,185,212 commits

Author SHA1 Message Date
Michael Kelley
67ff3d0a49 scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the I/O
submission fails in storvsc_do_io(), the I/O is typically retried by higher
level code, but the bounce buffer memory is never freed.  The mostly like
cause of I/O submission failure is a full VMBus channel ring buffer, which
is not uncommon under high I/O loads.  Eventually enough bounce buffer
memory leaks that the confidential VM can't do any I/O. The same problem
can arise in a non-confidential VM with kernel boot parameter
swiotlb=force.

Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory.

Fixes: 743b237c3a ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1670183564-76254-1-git-send-email-mikelley@microsoft.com
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-14 02:54:44 +00:00
Wenchao Hao
a3be19b91e scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.

This introduces a regression wrt. the issue fixed in commit 13e60d3ba2
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.

Consequently we need to check the session's target state during iscsid
restart.  If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).

Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-14 02:49:19 +00:00
Huacai Chen
5535f4f70c LoongArch: Update Loongson-3 default config file
1, Enable suspend (ACPI S3) and hibernation (ACPI S4).
2, Enable some options for FDT-based systems (e.g., SERIAL_OF_PLATFORM).
3, Enable CONFIG_KALLSYMS_ALL and CONFIG_DEBUG_FS to convenient ftrace.
4, Regenerate the whole file to keep the order of options be the same as
   the latest source code.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:54 +08:00
Qing Zhang
28ac0a9e04 LoongArch: modules/ftrace: Initialize PLT at load time
This patch implements ftrace trampolines through plt entry.

Tested by forcing ftrace_make_call() to use the module PLT, and then
loading up a module after setting up ftrace with:

| echo ":mod:<module-name>" > set_ftrace_filter;
| echo function > current_tracer;
| modprobe <module-name>

Since FTRACE_ADDR/FTRACE_REGS_ADDR is only defined when CONFIG_DYNAMIC_
FTRACE is selected, we wrap their usage in module_init_ftrace_plt() with
ifdeffery rather than using IS_ENABLED().

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:54 +08:00
Qing Zhang
a51ac5246d LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
ftrace_graph_ret_addr() can be called by stack unwinding code to convert
a found stack return address ('ret') to its original value, in case the
function graph tracer has modified it to be 'return_to_handler'. If the
hasn't been modified, the unchanged value of 'ret' is returned.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:54 +08:00
Qing Zhang
ac7127e1cc LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support
Allow for arguments to be passed in to ftrace_regs by default. If this
is set, then arguments and stack can be found from the pt_regs.

1. HAVE_DYNAMIC_FTRACE_WITH_ARGS don't need special hook for graph
tracer entry point, but instead we can use graph_ops::func function to
install the return_hooker.

2. Livepatch requires this option in the future.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Qing Zhang
8778ba2c8a LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support
This patch implements CONFIG_DYNAMIC_FTRACE_WITH_REGS on LoongArch,
which allows a traced function's arguments (and some other registers)
to be captured into a struct pt_regs, allowing these to be inspected
and modified.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Qing Zhang
5fcfad3d41 LoongArch/ftrace: Add dynamic function graph tracer support
Once the function_graph tracer is enabled, a filtered function has the
following call sequence:

1) ftracer_caller     ==> on/off by ftrace_make_call/ftrace_make_nop
2) ftrace_graph_caller
3) ftrace_graph_call  ==> on/off by ftrace_en/disable_ftrace_graph_caller
4) prepare_ftrace_return

Considering the following DYNAMIC_FTRACE_WITH_REGS feature, it would be
more extendable to have a ftrace_graph_caller function, instead of
calling prepare_ftrace_return directly in ftrace_caller.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Qing Zhang
4733f09d88 LoongArch/ftrace: Add dynamic function tracer support
The compiler has inserted 2 NOPs before the regular function prologue.
T series registers are available and safe because of LoongArch's psABI.

At runtime, we can replace nop with bl to enable ftrace call and replace
bl with nop to disable ftrace call. The bl instruction requires us to
save the original RA value, so it saves RA at t0 here.

Details are:

| Compiled   |       Disabled         |        Enabled         |
+------------+------------------------+------------------------+
| nop        | move     t0, ra        | move    t0, ra         |
| nop        | nop                    | bl      ftrace_caller  |
| func_body  | func_body              | func_body              |

The RA value will be recovered by ftrace_regs_entry, and restored into
RA before returning to the regular function prologue. When a function is
not being traced, the "move t0, ra" is not harmful.

1) ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c)
   The two functions turn each recorded call site of filtered functions
   into a call to ftrace_caller or nops.

2) ftracce_update_ftrace_func (in kernel/ftrace.c)
   turns the nops at ftrace_call into a call to a generic entry for
   function tracers.

3) ftrace_caller (in kernel/mcount_dyn.S)
   The entry where each _mcount call sites calls to once they are
   filtered to be traced.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Qing Zhang
a0a458fbd6 LoongArch/ftrace: Add recordmcount support
Recordmcount utility under scripts is run, after compiling each object,
to find out all the locations of calling _mcount() and put them into
specific seciton named __mcount_loc.

Then the linker collects all such information into a table in the kernel
image (between __start_mcount_loc and __stop_mcount_loc) for later use
by ftrace.

This patch adds LoongArch specific definitions to identify such locations.
And on LoongArch, only the C version is used to build the kernel now that
CONFIG_HAVE_C_RECORDMCOUNT is on.

Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Qing Zhang
dbe3ba3018 LoongArch/ftrace: Add basic support
This patch contains basic ftrace support for LoongArch. Specifically,
function tracer (HAVE_FUNCTION_TRACER), function graph tracer (HAVE_
FUNCTION_GRAPH_TRACER) are implemented following the instructions in
Documentation/trace/ftrace-design.txt.

Use `-pg` makes stub like a child function `void _mcount(void *ra)`.
Thus, it can be seen store RA and alloc stack before `call _mcount`.
Find `alloc stack` at first, and then find `store RA`.

Note that the functions in both inst.c and time.c should not be hooked
with the compiler's -pg option: to prevent infinite self-referencing for
the former, and to ignore early setup stuff for the latter.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Huacai Chen
9151dde403 LoongArch: module: Use got/plt section indices for relocations
Instead of saving a pointer to the .got, .plt and .plt_idx sections to
apply {got,plt}-based relocations, save and use their section indices
instead.

The mod->arch.{core,init}.{got,plt} pointers were problematic for live-
patch because they pointed within temporary section headers (provided by
the module loader via info->sechdrs) that would be freed after module
load. Since livepatch modules may need to apply relocations post-module-
load (for example, to patch a module that is loaded later), using section
indices to offset into the section headers (instead of accessing them
through a saved pointer) allows livepatch modules on LoongArch to pass
in their own copy of the section headers to apply_relocate_add() to
apply delayed relocations.

The method used is same as commit c8ebf64eab ("arm64/module: use plt
section indices for relocations").

Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Huacai Chen
09f33601bf LoongArch: Add basic STACKPROTECTOR support
Add basic stack protector support similar to other architectures. A
constant canary value is set at boot time, and with help of compiler's
-fstack-protector we can detect stack corruption.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Huacai Chen
7db54bfe44 LoongArch: Add hibernation (ACPI S4) support
Add hibernation (Suspend to Disk, aka ACPI S4) support for LoongArch.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Huacai Chen
366bb35a8e LoongArch: Add suspend (ACPI S3) support
Add suspend (Suspend To RAM, aka ACPI S3) support for LoongArch.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Binbin Zhou
27cab43156 LoongArch: Add processing ISA Node in DeviceTree
Similar to commit 6d0068ad15 ("MIPS: Loongson64: Process ISA
Node in DeviceTree"), we process ISA node in DeviceTree for FDT-based
systems.

Previously, we are hardcoding reserved ISA I/O Space in, now we are
processing it I/O via DeviceTree directly. The ranges property of ISA
node is used to determine the size and address of reserved I/O space.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Binbin Zhou
88d4d957ed LoongArch: Add FDT booting support from efi system table
Since commit 40cd01a9c324("efi/loongarch: libstub: remove dependency on
flattened DT"), we can parse the FDT from efi system table.

And now, LoongArch is coming to support booting with FDT, so we add the
relevant booting support as well as parameter parsing.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:41:53 +08:00
Huacai Chen
a275a82dcd LoongArch: Use alternative to optimize libraries
Use the alternative to optimize common libraries according whether CPU
has UAL (hardware unaligned access support) feature, including memset(),
memcopy(), memmove(), copy_user() and clear_user().

We have tested UnixBench on a Loongson-3A5000 quad-core machine (1.6GHz):

1, One copy, before patch:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0    9566582.0    819.8
Double-Precision Whetstone                       55.0       2805.3    510.1
Execl Throughput                                 43.0       2120.0    493.0
File Copy 1024 bufsize 2000 maxblocks          3960.0     209833.0    529.9
File Copy 256 bufsize 500 maxblocks            1655.0      89400.0    540.2
File Copy 4096 bufsize 8000 maxblocks          5800.0     320036.0    551.8
Pipe Throughput                               12440.0     340624.0    273.8
Pipe-based Context Switching                   4000.0     109939.1    274.8
Process Creation                                126.0       4728.7    375.3
Shell Scripts (1 concurrent)                     42.4       2223.1    524.3
Shell Scripts (8 concurrent)                      6.0        883.1   1471.9
System Call Overhead                          15000.0     518639.1    345.8
                                                                   ========
System Benchmarks Index Score                                         500.2

2, One copy, after patch:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0    9567674.7    819.9
Double-Precision Whetstone                       55.0       2805.5    510.1
Execl Throughput                                 43.0       2392.7    556.4
File Copy 1024 bufsize 2000 maxblocks          3960.0     417804.0   1055.1
File Copy 256 bufsize 500 maxblocks            1655.0     112909.5    682.2
File Copy 4096 bufsize 8000 maxblocks          5800.0    1255207.4   2164.2
Pipe Throughput                               12440.0     555712.0    446.7
Pipe-based Context Switching                   4000.0      99964.5    249.9
Process Creation                                126.0       5192.5    412.1
Shell Scripts (1 concurrent)                     42.4       2302.4    543.0
Shell Scripts (8 concurrent)                      6.0        919.6   1532.6
System Call Overhead                          15000.0     511159.3    340.8
                                                                   ========
System Benchmarks Index Score                                         640.1

3, Four copies, before patch:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   38268610.5   3279.2
Double-Precision Whetstone                       55.0      11222.2   2040.4
Execl Throughput                                 43.0       7892.0   1835.3
File Copy 1024 bufsize 2000 maxblocks          3960.0     235149.6    593.8
File Copy 256 bufsize 500 maxblocks            1655.0      74959.6    452.9
File Copy 4096 bufsize 8000 maxblocks          5800.0     545048.5    939.7
Pipe Throughput                               12440.0    1337359.0   1075.0
Pipe-based Context Switching                   4000.0     473663.9   1184.2
Process Creation                                126.0      17491.2   1388.2
Shell Scripts (1 concurrent)                     42.4       6865.7   1619.3
Shell Scripts (8 concurrent)                      6.0       1015.9   1693.1
System Call Overhead                          15000.0    1899535.2   1266.4
                                                                   ========
System Benchmarks Index Score                                        1278.3

4, Four copies, after patch:

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   38272815.5   3279.6
Double-Precision Whetstone                       55.0      11222.8   2040.5
Execl Throughput                                 43.0       8839.2   2055.6
File Copy 1024 bufsize 2000 maxblocks          3960.0     313912.9    792.7
File Copy 256 bufsize 500 maxblocks            1655.0      80976.1    489.3
File Copy 4096 bufsize 8000 maxblocks          5800.0    1176594.3   2028.6
Pipe Throughput                               12440.0    2100941.9   1688.9
Pipe-based Context Switching                   4000.0     476696.4   1191.7
Process Creation                                126.0      18394.7   1459.9
Shell Scripts (1 concurrent)                     42.4       7172.2   1691.6
Shell Scripts (8 concurrent)                      6.0       1058.3   1763.9
System Call Overhead                          15000.0    1874714.7   1249.8
                                                                   ========
System Benchmarks Index Score                                        1488.8

Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Huacai Chen
19e5eb15b0 LoongArch: Add alternative runtime patching mechanism
Introduce the "alternative" mechanism from ARM64 and x86 for LoongArch
to apply runtime patching. The main purpose of this patch is to provide
a framework. In future we can use this mechanism (i.e., the ALTERNATIVE
and ALTERNATIVE_2 macros) to optimize hotspot functions according to cpu
features.

Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Huacai Chen
61a6fccc0b LoongArch: Add unaligned access support
Loongson-2 series (Loongson-2K500, Loongson-2K1000) don't support
unaligned access in hardware, while Loongson-3 series (Loongson-3A5000,
Loongson-3C5000) are configurable whether support unaligned access in
hardware. This patch add unaligned access emulation for those LoongArch
processors without hardware support.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
dbcd7f5faf LoongArch: BPF: Add BPF exception tables
Inspired by commit 800834285361("bpf, arm64: Add BPF exception tables"),
do similar to LoongArch to add BPF exception tables.

When a tracing BPF program attempts to read memory without using the
bpf_probe_read() helper, the verifier marks the load instruction with
the BPF_PROBE_MEM flag. Since the LoongArch JIT does not currently
recognize this flag it falls back to the interpreter.

Add support for BPF_PROBE_MEM, by appending an exception table to the
BPF program. If the load instruction causes a data abort, the fixup
infrastructure finds the exception table and fixes up the fault, by
clearing the destination register and jumping over the faulting
instruction.

To keep the compact exception table entry format, inspect the pc in
fixup_exception(). A more generic solution would add a "handler" field
to the table entry, like on x86, s390 and arm64, etc.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
912bcfaf36 LoongArch: Remove the .fixup section usage
Use the `.L_xxx` label to improve fixup code and then remove the .fixup
section usage.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
672999cfae LoongArch: extable: Add a dedicated uaccess handler
Inspired by commit 2e77a62cb3a6("arm64: extable: add a dedicated uaccess
handler"), do similar to LoongArch to add a dedicated uaccess exception
handler to update registers in exception context and subsequently return
back into the function which faulted, so we remove the need for fixups
specialized to each faulting instruction.

Add gpr-num.h here because we need to map the same GPR names to integer
constants, so that we can use this to build meta-data for the exception
fixups.

The compiler treats gpr 0 as zero rather than $r0, so set it separately
to .L__gpr_num_zero, otherwise the following assembly error will occurs:

{standard input}: Assembler messages:
{standard input}:1074: Error: invalid operands (*UND* and *ABS* sections) for `<<'
{standard input}:1160: Error: invalid operands (*UND* and *ABS* sections) for `<<'
make[1]: *** [scripts/Makefile.build:249: fs/fcntl.o] Error 1

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
26bc824412 LoongArch: extable: Add type and data fields
This is a LoongArch port of commit d6e2cc5647 ("arm64: extable: add
`type` and `data` fields").

Subsequent patches will add specialized handlers for fixups, in addition
to the simple PC fixup we have today. In preparation, this patch adds a
new `type` field to struct exception_table_entry, and uses this to
distinguish the fixup and other cases. A `data` field is also added so
that subsequent patches can associate data specific to each exception
site (e.g. register numbers).

Handlers are named ex_handler_*() for consistency, following the example
of x86. At the same time, get_ex_fixup() is split out into a helper so
that it can be used by other ex_handler_*() functions in the subsequent
patches.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
3d36f4298b LoongArch: Switch to relative exception tables
Similar to other architectures such as arm64, x86, riscv and so on, use
offsets relative to the exception table entry values rather than their
absolute addresses for both the exception location and the fixup.

However, LoongArch label difference because it will actually produce two
relocations, a pair of R_LARCH_ADD32 and R_LARCH_SUB32. Take simple code
below for example:

$ cat test_ex_table.S
.section .text
1:
        nop
.section __ex_table,"a"
        .balign 4
        .long (1b - .)
.previous

$ loongarch64-unknown-linux-gnu-gcc -c test_ex_table.S
$ loongarch64-unknown-linux-gnu-readelf -Wr test_ex_table.o

Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
    Offset            Info             Type         Symbol's Value   Symbol's Name + Addend
0000000000000000 0000000600000032 R_LARCH_ADD32    0000000000000000  .L1^B1 + 0
0000000000000000 0000000500000037 R_LARCH_SUB32    0000000000000000  L0^A + 0

The modpost will complain the R_LARCH_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Youling Tang
508f28c671 LoongArch: Consolidate __ex_table construction
Consolidate all the __ex_table constuction code with a _ASM_EXTABLE or
_asm_extable helper.

There should be no functional change as a result of this patch.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-12-14 08:36:11 +08:00
Nick Terrell
70d822cfb7 Merge branch 'zstd-next' into zstd-linus 2022-12-13 16:24:40 -08:00
Nick Terrell
4f2c0a4acf Merge branch 'main' into zstd-linus 2022-12-13 16:21:55 -08:00
Linus Torvalds
7e68dd7d07 Networking changes for 6.2.
Core
 ----
  - Allow live renaming when an interface is up
 
  - Add retpoline wrappers for tc, improving considerably the
    performances of complex queue discipline configurations.
 
  - Add inet drop monitor support.
 
  - A few GRO performance improvements.
 
  - Add infrastructure for atomic dev stats, addressing long standing
    data races.
 
  - De-duplicate common code between OVS and conntrack offloading
    infrastructure.
 
  - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
 
  - Netfilter: introduce packet parser for tunneled packets
 
  - Replace IPVS timer-based estimators with kthreads to scale up
    the workload with the number of available CPUs.
 
  - Add the helper support for connection-tracking OVS offload.
 
 BPF
 ---
  - Support for user defined BPF objects: the use case is to allocate
    own objects, build own object hierarchies and use the building
    blocks to build own data structures flexibly, for example, linked
    lists in BPF.
 
  - Make cgroup local storage available to non-cgroup attached BPF
    programs.
 
  - Avoid unnecessary deadlock detection and failures wrt BPF task
    storage helpers.
 
  - A relevant bunch of BPF verifier fixes and improvements.
 
  - Veristat tool improvements to support custom filtering, sorting,
    and replay of results.
 
  - Add LLVM disassembler as default library for dumping JITed code.
 
  - Lots of new BPF documentation for various BPF maps.
 
  - Add bpf_rcu_read_{,un}lock() support for sleepable programs.
 
  - Add RCU grace period chaining to BPF to wait for the completion
    of access from both sleepable and non-sleepable BPF programs.
 
  - Add support storing struct task_struct objects as kptrs in maps.
 
  - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
    values.
 
  - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
 
 Protocols
 ---------
  - TCP: implement Protective Load Balancing across switch links.
 
  - TCP: allow dynamically disabling TCP-MD5 static key, reverting
    back to fast[er]-path.
 
  - UDP: Introduce optional per-netns hash lookup table.
 
  - IPv6: simplify and cleanup sockets disposal.
 
  - Netlink: support different type policies for each generic
    netlink operation.
 
  - MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
 
  - MPTCP: add netlink notification support for listener sockets
    events.
 
  - SCTP: add VRF support, allowing sctp sockets binding to VRF
    devices.
 
  - Add bridging MAC Authentication Bypass (MAB) support.
 
  - Extensions for Ethernet VPN bridging implementation to better
    support multicast scenarios.
 
  - More work for Wi-Fi 7 support, comprising conversion of all
    the existing drivers to internal TX queue usage.
 
  - IPSec: introduce a new offload type (packet offload) allowing
    complete header processing and crypto offloading.
 
  - IPSec: extended ack support for more descriptive XFRM error
    reporting.
 
  - RXRPC: increase SACK table size and move processing into a
    per-local endpoint kernel thread, reducing considerably the
    required locking.
 
  - IEEE 802154: synchronous send frame and extended filtering
    support, initial support for scanning available 15.4 networks.
 
  - Tun: bump the link speed from 10Mbps to 10Gbps.
 
  - Tun/VirtioNet: implement UDP segmentation offload support.
 
 Driver API
 ----------
 
  - PHY/SFP: improve power level switching between standard
    level 1 and the higher power levels.
 
  - New API for netdev <-> devlink_port linkage.
 
  - PTP: convert existing drivers to new frequency adjustment
    implementation.
 
  - DSA: add support for rx offloading.
 
  - Autoload DSA tagging driver when dynamically changing protocol.
 
  - Add new PCP and APPTRUST attributes to Data Center Bridging.
 
  - Add configuration support for 800Gbps link speed.
 
  - Add devlink port function attribute to enable/disable RoCE and
    migratable.
 
  - Extend devlink-rate to support strict prioriry and weighted fair
    queuing.
 
  - Add devlink support to directly reading from region memory.
 
  - New device tree helper to fetch MAC address from nvmem.
 
  - New big TCP helper to simplify temporary header stripping.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Marvel Octeon CNF95N and CN10KB Ethernet Switches.
    - Marvel Prestera AC5X Ethernet Switch.
    - WangXun 10 Gigabit NIC.
    - Motorcomm yt8521 Gigabit Ethernet.
    - Microchip ksz9563 Gigabit Ethernet Switch.
    - Microsoft Azure Network Adapter.
    - Linux Automation 10Base-T1L adapter.
 
  - PHY:
    - Aquantia AQR112 and AQR412.
    - Motorcomm YT8531S.
 
  - PTP:
    - Orolia ART-CARD.
 
  - WiFi:
    - MediaTek Wi-Fi 7 (802.11be) devices.
    - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
      devices.
 
  - Bluetooth:
    - Broadcom BCM4377/4378/4387 Bluetooth chipsets.
    - Realtek RTL8852BE and RTL8723DS.
    - Cypress.CYW4373A0 WiFi + Bluetooth combo device.
 
 Drivers
 -------
  - CAN:
    - gs_usb: bus error reporting support.
    - kvaser_usb: listen only and bus error reporting support.
 
  - Ethernet NICs:
    - Intel (100G):
      - extend action skbedit to RX queue mapping.
      - implement devlink-rate support.
      - support direct read from memory.
    - nVidia/Mellanox (mlx5):
      - SW steering improvements, increasing rules update rate.
      - Support for enhanced events compression.
      - extend H/W offload packet manipulation capabilities.
      - implement IPSec packet offload mode.
    - nVidia/Mellanox (mlx4):
      - better big TCP support.
    - Netronome Ethernet NICs (nfp):
      - IPsec offload support.
      - add support for multicast filter.
    - Broadcom:
      - RSS and PTP support improvements.
    - AMD/SolarFlare:
      - netlink extened ack improvements.
      - add basic flower matches to offload, and related stats.
    - Virtual NICs:
      - ibmvnic: introduce affinity hint support.
    - small / embedded:
      - FreeScale fec: add initial XDP support.
      - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
      - TI am65-cpsw: add suspend/resume support.
      - Mediatek MT7986: add RX wireless wthernet dispatch support.
      - Realtek 8169: enable GRO software interrupt coalescing per
        default.
 
  - Ethernet high-speed switches:
    - Microchip (sparx5):
      - add support for Sparx5 TC/flower H/W offload via VCAP.
    - Mellanox mlxsw:
      - add 802.1X and MAC Authentication Bypass offload support.
      - add ip6gre support.
 
  - Embedded Ethernet switches:
    - Mediatek (mtk_eth_soc):
      - improve PCS implementation, add DSA untag support.
      - enable flow offload support.
    - Renesas:
      - add rswitch R-Car Gen4 gPTP support.
    - Microchip (lan966x):
      - add full XDP support.
      - add TC H/W offload via VCAP.
      - enable PTP on bridge interfaces.
    - Microchip (ksz8):
      - add MTU support for KSZ8 series.
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - support configuring channel dwell time during scan.
 
  - MediaTek WiFi (mt76):
    - enable Wireless Ethernet Dispatch (WED) offload support.
    - add ack signal support.
    - enable coredump support.
    - remain_on_channel support.
 
  - Intel WiFi (iwlwifi):
    - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
    - 320 MHz channels support.
 
  - RealTek WiFi (rtw89):
    - new dynamic header firmware format support.
    - wake-over-WLAN support.
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmOYXUcSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOk8zQP/R7BZtbJMTPiWkRnSoKHnAyupDVwrz5U
 ktukLkwPsCyJuEbAjgxrxf4EEEQ9uq2FFlxNSYuKiiQMqIpFxV6KED7LCUygn4Tc
 kxtkp0Q+5XiqisWlQmtfExf2OjuuPqcjV9tWCDBI6GebKUbfNwY/eI44RcMu4BSv
 DzIlW5GkX/kZAPqnnuqaLsN3FudDTJHGEAD7NbA++7wJ076RWYSLXlFv0Z+SCSPS
 H8/PEG0/ZK/65rIWMAFRClJ9BNIDwGVgp0GrsIvs1gqbRUOlA1hl1rDM21TqtNFf
 5QPQT7sIfTcCE/nerxKJD5JE3JyP+XRlRn96PaRw3rt4MgI6I/EOj/HOKQ5tMCNc
 oPiqb7N70+hkLZyr42qX+vN9eDPjp2koEQm7EO2Zs+/534/zWDs24Zfk/Aa1ps0I
 Fa82oGjAgkBhGe/FZ6i5cYoLcyxqRqZV1Ws9XQMl72qRC7/BwvNbIW6beLpCRyeM
 yYIU+0e9dEm+wHQEdh2niJuVtR63hy8tvmPx56lyh+6u0+pondkwbfSiC5aD3kAC
 ikKsN5DyEsdXyiBAlytCEBxnaOjQy4RAz+3YXSiS0eBNacXp03UUrNGx4Pzpu/D0
 QLFJhBnMFFCgy5to8/DvKnrTPgZdSURwqbIUcZdvU21f1HLR8tUTpaQnYffc/Whm
 V8gnt1EL+0cc
 =CbJC
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev <-> devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...
2022-12-13 15:47:48 -08:00
Linus Torvalds
1ca06f1c1a Xtensa updates for v6.2
- fix kernel build with gcc-13
 - various minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmOYnzsTHGpjbXZia2Jj
 QGdtYWlsLmNvbQAKCRBR+cyR+D+gRKoPD/4iKR+jfW6FJhPydpqDOz9OvSqo8Nz6
 miw6O83e7z2vD9AEDyPwTpd6zMqwZwCgFttkTkraivEmYyNyp+c7cNHkwgJo7IEZ
 jTCctvSM1kLBVbblyKr+Nu/ENrSv3WFCJj8kaBdlRj1lbZm3TNRUqos1oNW1gTf7
 QFjHZcOE3qTMzBNhrOl4dyCYlJJQCQPXYUUhFZ9wTPf5LfAFlJJdrqgQU/70I7J2
 lVzlXsLeD8WarApSt6QvlESx6nVPlahTCS2LOWvKV2fo7+VPGDCzNUPv6mWIlYbI
 id3o0geu9avpv4OIKRoC5BKTnXgaAdNoFp6u9De6X64SZ8Coa59QkDnsVlsVYlyQ
 ExlgBVElIZ+Z4/Z6NmqgBaNmHM30kmUfBxvp0Xcn6JGWfu2dvKCT1O2YDDYCHoTS
 jUvec01Tnru3fTbLzyNo+59m+n7h9nOJiK4WwvJV0ac2+mHj/qOFHcSVN0HAuTEW
 8wm3Wvog0x3DrXJTxOGBMCRNV1uwx6CvWuMOqh/LM7jmLJmLAu31uanhiij8a1Nt
 Czxnt9mte1lZhgmCXWO1vUUcbOshTglQY+KsuvGH9bJVqqI+Twe7v/nNqDl0NHAt
 TGWGpxD9rKD5S91jQZGy9stelStWImAbx3bxOyifYBISQU3bfkUzfOby6Dj1HECl
 wx9KaG9Ru8bKKw==
 =qcsK
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

 - fix kernel build with gcc-13

 - various minor fixes

* tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add __umulsidi3 helper
  xtensa: update config files
  MAINTAINERS: update the 'T:' entry for xtensa
2022-12-13 15:25:08 -08:00
Linus Torvalds
4cb1fc6fff ARM updates for 6.2
- update unwinder to cope with module PLTs
 - enable UBSAN on ARM
 - improve kernel fault message
 - update UEFI runtime page tables dump
 - avoid clang's __aeabi_uldivmod generated in NWFPE code
 - disable FIQs on CPU shutdown paths
 - update XOR register usage
 - a number of build updates (using .arch, thread pointer,
   removal of lazy evaluation in Makefile)
 - conversion of stacktrace code to stackwalk
 - findbit assembly updates
 - hwcap feature updates for ARMv8 CPUs
 - instruction dump updates for big-endian platforms
 - support for function error injection
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmOYbjMACgkQ9OeQG+St
 rGScZw//ePQ+E/Me/p+mV6ecVpx0r3n7iM01TCqtLj2j+wSuk/VhYQLqLAaNVUR1
 YeBxvpGbmigzOCERo2hUxosmloP0bTh9zelNYJCywg3yeezoV8IvfTYYY3UyTCBX
 mlWwm4lKyvTnfY3qXrmLCu/HxVJqyOi6IWLZFzqxAz9zS9VYX/nbUrsUzbZgpgs6
 Kvcysj/jvdknbh1aMHoD/uHV7EoOKLUegmW7BXQToBMiLKIemeEoeiaD1rMGl9Ro
 DJiyfnUlGJkchsy+sRWKXL1GQG4jCfPNVhnBoBpAfLJgjIa9ia9wTpfsKER69pJ2
 Xod2b78VusYim5SS72WU+AF53fH4HN8s1RMOiP35XazT0j+bYgv+WRUXLNwtyEYW
 lPBhFe4P622LjJgJlswilZ8+RWtY9Inw5Cl9xKfWbC+qwE88Bpi63FQ5lyshqUUJ
 anLQ+ic/6Gy8jQRWjZM6f1z5sEtESHgi631B+gJ8L4BeeaB3KozqrlYEtnMDkVRo
 Tz+4EO4RHV+fwUd0wj0O5ZxwKPXdFKivte++XWgogr5u/Qqhl+kzi9H+j27u4koF
 nvfMbz7Nf9xe4CSAiJTn7qs3f2mZWFiQNQHGtXWACAbZc7oGVPwhGXKDN44SFYAE
 oq7P7Hkcs+d51K8ZEL3IVC28bHejdR4pI5jNm9ECgFdG90s03+0=
 =1spR
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - update unwinder to cope with module PLTs

 - enable UBSAN on ARM

 - improve kernel fault message

 - update UEFI runtime page tables dump

 - avoid clang's __aeabi_uldivmod generated in NWFPE code

 - disable FIQs on CPU shutdown paths

 - update XOR register usage

 - a number of build updates (using .arch, thread pointer, removal of
   lazy evaluation in Makefile)

 - conversion of stacktrace code to stackwalk

 - findbit assembly updates

 - hwcap feature updates for ARMv8 CPUs

 - instruction dump updates for big-endian platforms

 - support for function error injection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: 9279/1: support function error injection
  ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
  ARM: 9276/1: Refactor dump_instr()
  ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
  ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
  ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
  ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
  ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
  ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
  ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
  ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
  ARM: 9267/1: Define Armv8 registers in AArch32 state
  ARM: findbit: add unwinder information
  ARM: findbit: operate by words
  ARM: findbit: convert to macros
  ARM: findbit: provide more efficient ARMv7 implementation
  ARM: findbit: document ARMv5 bit offset calculation
  ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
  ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
  ARM: 9265/1: pass -march= only to compiler
  ...
2022-12-13 15:22:14 -08:00
Linus Torvalds
740afa4d39 - Two minor fixes to the sev-guest driver
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYkXIACgkQEsHwGGHe
 VUo39BAAvJ+dNS/IC/bOcPekrtDO/1OQlwhvmLzaAHVRCmV8s6ScSwtjm+IAkjS+
 POaLuTiF2jk5sjT/kb0TSSgH+jts26rEU8w1u1LIjSgZMbgA/g47pfTJQTvzsL8+
 bmH4naOG8ymfB/0K5/5nXoxtrIJG7uPZ/I6bABFAOt7LQoaECNfGa0LILDsD/f9R
 Gyl4kC560Vh/G9t3cNKgnRb11jfj2lR7UrRyqQ0/PLFtjILdKw3skw1vGEhnl+FN
 S+KzstMQ/6p5xRcm7HVYN8YJPwM4uGLMbfAnAPxVLx+gBIKAY2pr/rse+6JCWn5n
 10sVHm1xpkMLvIl71KT9+jTKxKX9kJ35Av/ai2da3/hpcZydkVf7zP0k2sP5FTIx
 smTemwiJFRfrqyGmB8NY5/Bd3qRjfAb9gp+bXp12ysl1TjFAkDH4EfB5wmU2HoG8
 Idlmfr5N15XQNPUVFDX8aNX91+22K3vZWbABqerpN3J6SicwNM8ZPSQ2rf1cdkqA
 doHsRp7523QZlj9uTOCDfif1axNQk2MzLc8O8/itGzxXGf8x5ForgI3rnNBiH2GE
 Yr9pJaAxl5mk8cVkU+F5GaRZ/4IXlBhXaTjU+oZ6HxL9wutilI6h2gRcKkqoseXw
 66+su5ABWVuf7l18pwIu+tvo9fa9rExXmVbji8B3zxpZ2yTyS3Y=
 =a3Z+
 -----END PGP SIGNATURE-----

Merge tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 sev updates from Borislav Petkov:

 - Two minor fixes to the sev-guest driver

* tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Add a MODULE_ALIAS
  virt/sev-guest: Remove unnecessary free in init_crypto()
2022-12-13 15:17:55 -08:00
Linus Torvalds
82c72902c5 - Simplify paravirt patching machinery by removing the now unused
clobber mask
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYkNQACgkQEsHwGGHe
 VUqflhAAnZBE/UzP499WcdjvnnQWLORfjUzAyU157U/08iMCx5qF/Qw73SrQwjIX
 XPWiqi0gvLS/2eDK02UylBF5reNUuATNO5wavGb0ORUKmDytcklZSzoygunByvrG
 fco2DXw99qQ2xhZ4fU7UbVoEek7P7nxM33dMfZjeiGldPSiRKV8pmtTG4Gmq5Ihl
 gEI1MLKw75oTg3t/VJqPoENv+wIBH/i2Q+oFr7E9cUoO/3T94OsKgeuCf0f+tINY
 YQtiFYFQGLzMEQlPnGBj+2S7usocAs80RCjvRSMMXhuC6hmoGBibw2/u25s+QmY/
 yHYsmxQ+a4dEFiv/8jBAxJew/eQwiz0LSTteVS8/2cV4lhiNJHb8L2AV+xHms8Az
 fPTYGEX4GbykZPCemVI/y3saVbPOidGIoOUvOqML8LeQYURntgh1KleTmF5UweR+
 ZMwEbXOS0Ni7wsB1Tfj/A21eGOG8dFzhszZBz8QjhtQHgckeF/JtAsNWSVRdhRyz
 Z0Cm1+XPftNx2eus6T7i6y9Kj8QSKszsDs+oLFvhiO8BkeJhLn9w3IQXCsDjVeZU
 y0Qx3VakL4MK3Im+Ah/ZM6IQQuGR3ld8x1jQJkp3FAylmznqSjYl1MoUA5MZwnwv
 M3yNGcLFO5uIjBfvFwBQXH28FkSS7tL9OfmtDyrEk2ITILmGqBU=
 =LcBv
 -----END PGP SIGNATURE-----

Merge tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 paravirt update from Borislav Petkov:

 - Simplify paravirt patching machinery by removing the now unused
   clobber mask

* tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Remove clobber bitmask from .parainstructions
2022-12-13 15:09:40 -08:00
Linus Torvalds
a70210f415 - Add support for multiple testing sequences to the Intel In-Field Scan
driver in order to be able to run multiple different test patterns.
 Rework things and remove the BROKEN dependency so that the driver can be
 enabled (Jithu Joseph)
 
 - Remove the subsys interface usage in the microcode loader because it
 is not really needed
 
 - A couple of smaller fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYjh8ACgkQEsHwGGHe
 VUpu8xAAhY7ywLcAoG9p3AaGiXpryFwnXFBah13o1rkgkJGRaG/eVjPJ4KUUjOQs
 Wo3WUHeeHwmFWq+F/OSRefNsptOLBQ3u/cSza9TDDjPoS3glO5cIFc34JqIItMTg
 L1GMB4LfmD1+9lYpM6Td11/Dluqf7EjeEdF4qDmCRZ5i4YNsaAlM4HtgATavNkYc
 6Bvsi1r7tv7tCNDAEYqEfsQLoc79Yca4W5s86HNIyrxtyk9RLrK75WvRkcpTSnK9
 SEpgpYwZy4iRTtZmePC7BqqbHfV6NoeuRqIMR73FrNK9pQuauGFMPkIx08Sgl3BW
 /YGpefleGBHhy6Dqa6rEPsYS9xHfhqYAde09zzECJWW4VSI0PuFKyfm67ep2O7q6
 zbV2DjxEZ+8kWeO9cDJPedEd8pXC8Ua7H+KNl00npdfNlkBaVR9ZRjX7ZVoiFMi8
 6SRmCr1MLngldSMkUr6cYiLpoXmRzM+7gnKhVzhO6yNa0eihYBAIZ5lei0n9Q01W
 Soxvec2KKeSZraNLoQH0MSndEJY4sqx6lPjlXgFT6gGHzgfQZTg+9INdaPK9gbI7
 tg5j1e0/1UyvWrxYxOdzThtRY1X7Y1QtdpQDcatkVOgR1uZi1CTDx1dxTrHP5jbZ
 7MSKn/8/T61beG6ujjif+pC8kOwNISLNDBBZGNzeLRyx8t9/6jQ=
 =Z2Nu
 -----END PGP SIGNATURE-----

Merge tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 microcode and IFS updates from Borislav Petkov:
 "The IFS (In-Field Scan) stuff goes through tip because the IFS driver
  uses the same structures and similar functionality as the microcode
  loader and it made sense to route it all through this branch so that
  there are no conflicts.

   - Add support for multiple testing sequences to the Intel In-Field
     Scan driver in order to be able to run multiple different test
     patterns. Rework things and remove the BROKEN dependency so that
     the driver can be enabled (Jithu Joseph)

   - Remove the subsys interface usage in the microcode loader because
     it is not really needed

   - A couple of smaller fixes and cleanups"

* tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/microcode/intel: Do not retry microcode reloading on the APs
  x86/microcode/intel: Do not print microcode revision and processor flags
  platform/x86/intel/ifs: Add missing kernel-doc entry
  Revert "platform/x86/intel/ifs: Mark as BROKEN"
  Documentation/ABI: Update IFS ABI doc
  platform/x86/intel/ifs: Add current_batch sysfs entry
  platform/x86/intel/ifs: Remove reload sysfs entry
  platform/x86/intel/ifs: Add metadata validation
  platform/x86/intel/ifs: Use generic microcode headers and functions
  platform/x86/intel/ifs: Add metadata support
  x86/microcode/intel: Use a reserved field for metasize
  x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check()
  x86/microcode/intel: Reuse microcode_sanity_check()
  x86/microcode/intel: Use appropriate type in microcode_sanity_check()
  x86/microcode/intel: Reuse find_matching_signature()
  platform/x86/intel/ifs: Remove memory allocation from load path
  platform/x86/intel/ifs: Remove image loading during init
  platform/x86/intel/ifs: Return a more appropriate error code
  platform/x86/intel/ifs: Remove unused selection
  x86/microcode: Drop struct ucode_cpu_info.valid
  ...
2022-12-13 15:05:29 -08:00
Linus Torvalds
3ef3ace4e2 - Split MTRR and PAT init code to accomodate at least Xen PV and TDX
guests which do not get MTRRs exposed but only PAT. (TDX guests do not
 support the cache disabling dance when setting up MTRRs so they fall
 under the same category.) This is a cleanup work to remove all the ugly
 workarounds for such guests and init things separately (Juergen Gross)
 
 - Add two new Intel CPUs to the list of CPUs with "normal" Energy
 Performance Bias, leading to power savings
 
 - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern Centaur
 CPUs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYhIMACgkQEsHwGGHe
 VUpxug//ZKw3hYFroKhsULJi/e0j2nGARiSlJrJcFHl2vgh9yGvDsnYUyM/rgjgt
 cM3uCLbEG7nA6uhB3nupzaXZ8lBM1nU9kiEl/kjQ5oYf9nmJ48fLttvWGfxYN4s3
 kj5fYVhlOZpntQXIWrwxnPqghUysumMnZmBJeKYiYNNfkj62l3xU2Ni4Gnjnp02I
 9MmUhl7pj1aEyOQfM8rovy+wtYCg5WTOmXVlyVN+b9MwfYeK+stojvCZHxtJs9BD
 fezpJjjG+78xKUC7vVZXCh1p1N5Qvj014XJkVl9Hg0n7qizKFZRtqi8I769G2ptd
 exP8c2nDXKCqYzE8vK6ukWgDANQPs3d6Z7EqUKuXOCBF81PnMPSUMyNtQFGNM6Wp
 S5YSvFfCgUjp50IunOpvkDABgpM+PB8qeWUq72UFQJSOymzRJg/KXtE2X+qaMwtC
 0i6VLXfMddGcmqNKDppfGtCjq2W5VrNIIJedtAQQGyl+pl3XzZeNomhJpm/0mVfJ
 8UrlXZeXl/EUQ7qk40gC/Ash27pU9ZDx4CMNMy1jDIQqgufBjEoRIDSFqQlghmZq
 An5/BqMLhOMxUYNA7bRUnyeyxCBypetMdQt5ikBmVXebvBDmArXcuSNAdiy1uBFX
 KD8P3Y1AnsHIklxkLNyZRUy7fb4mgMFenUbgc0vmbYHbFl0C0pQ=
 =Zmgh
 -----END PGP SIGNATURE-----

Merge tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cpu updates from Borislav Petkov:

 - Split MTRR and PAT init code to accomodate at least Xen PV and TDX
   guests which do not get MTRRs exposed but only PAT. (TDX guests do
   not support the cache disabling dance when setting up MTRRs so they
   fall under the same category)

   This is a cleanup work to remove all the ugly workarounds for such
   guests and init things separately (Juergen Gross)

 - Add two new Intel CPUs to the list of CPUs with "normal" Energy
   Performance Bias, leading to power savings

 - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern
   Centaur CPUs

* tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/mtrr: Make message for disabled MTRRs more descriptive
  x86/pat: Handle TDX guest PAT initialization
  x86/cpuid: Carve out all CPUID functionality
  x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
  x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
  x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
  x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
  x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
  x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs
  x86/mtrr: Simplify mtrr_ops initialization
  x86/cacheinfo: Switch cache_ap_init() to hotplug callback
  x86: Decouple PAT and MTRR handling
  x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init()
  x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init
  x86/mtrr: Get rid of __mtrr_enabled bool
  x86/mtrr: Simplify mtrr_bp_init()
  x86/mtrr: Remove set_all callback from struct mtrr_ops
  x86/mtrr: Disentangle MTRR init from PAT init
  x86/mtrr: Move cache control code to cacheinfo.c
  x86/mtrr: Split MTRR-specific handling from cache dis/enabling
  ...
2022-12-13 14:56:56 -08:00
Linus Torvalds
4eb77fa102 - Do some spring cleaning to the compressed boot code by moving the
EFI mixed-mode code to a separate compilation unit, the AMD memory
 encryption early code where it belongs and fixing up build dependencies.
 Make the deprecated EFI handover protocol optional with the goal of
 removing it at some point (Ard Biesheuvel)
 
 - Skip realmode init code on Xen PV guests as it is not needed there
 
 - Remove an old 32-bit PIC code compiler workaround
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYaiMACgkQEsHwGGHe
 VUrNVhAAk3lLagEsrBcQ24SnMMAyQvdKfRucn9fbs72jBCyWbDqXcE59qNgdbMS1
 3rIL+EJdF8jlm5K28GjRS1WSvwUyYbyFEfUcYfqZl9L/5PAl7PlG7nNQw7/gXnw+
 xS57w/Q3cONlo5LC0K2Zkbj/59RvDoBEs3nkhozkKR0npTDW/LK3Vl0zgKTkvqsV
 DzRIHhWsqSEvpdowbQmQCyqFh/pOoQlZkQwjYVA9+SaQYdH3Yo1dpLd5i9I9eVmJ
 dci/HDU+plwYYuZ1XhxwXr82PcdCUVYjJ/DTt9GkTVYq7u5EWx62puxTl+c+wbG2
 H1WBXuZHBGdzNMFdnb1k9RuLCaYdaxKTNlZh3FPMMDtkjtjKTl/olXTlFUYFgI6E
 FPv4hi15g6pMveS3K6YUAd0uGvpsjvLUZHPqMDVS2trhxLENQALc6Id/PwqzrQ1T
 FzfPYcDyFFwMM3MDuWc8ClwEDD9wr0Z4m4Aek/ca2r85AKEX8ZtTTlWZoI4E9A4B
 hEjUFnRhT/d6XLWwZqcOIKfwtbpKAjdsCN3ElFst8ogRFAXqW8luDoI4BRCkBC4p
 T4RHdij4afkuFjSAxBacazpaavtcCsDqXwBpeL4YN+4fA7+NokVZGiQVh/3S8BPn
 LlgIf6awFq6yQq7JyEGPdk+dWn5sknldixZ55m666ZLzSvQhvE8=
 =VGZx
 -----END PGP SIGNATURE-----

Merge tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Borislav Petkov:
 "A  of early boot cleanups and fixes.

   - Do some spring cleaning to the compressed boot code by moving the
     EFI mixed-mode code to a separate compilation unit, the AMD memory
     encryption early code where it belongs and fixing up build
     dependencies. Make the deprecated EFI handover protocol optional
     with the goal of removing it at some point (Ard Biesheuvel)

   - Skip realmode init code on Xen PV guests as it is not needed there

   - Remove an old 32-bit PIC code compiler workaround"

* tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove x86_32 PIC using %ebx workaround
  x86/boot: Skip realmode init code when running as Xen PV guest
  x86/efi: Make the deprecated EFI handover protocol optional
  x86/boot/compressed: Only build mem_encrypt.S if AMD_MEM_ENCRYPT=y
  x86/boot/compressed: Adhere to calling convention in get_sev_encryption_bit()
  x86/boot/compressed: Move startup32_check_sev_cbit() out of head_64.S
  x86/boot/compressed: Move startup32_check_sev_cbit() into .text
  x86/boot/compressed: Move startup32_load_idt() out of head_64.S
  x86/boot/compressed: Move startup32_load_idt() into .text section
  x86/boot/compressed: Pull global variable reference into startup32_load_idt()
  x86/boot/compressed: Avoid touching ECX in startup32_set_idt_entry()
  x86/boot/compressed: Simplify IDT/GDT preserve/restore in the EFI thunk
  x86/boot/compressed, efi: Merge multiple definitions of image_offset into one
  x86/boot/compressed: Move efi32_pe_entry() out of head_64.S
  x86/boot/compressed: Move efi32_entry out of head_64.S
  x86/boot/compressed: Move efi32_pe_entry into .text section
  x86/boot/compressed: Move bootargs parsing out of 32-bit startup code
  x86/boot/compressed: Move 32-bit entrypoint code into .text section
  x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S
2022-12-13 14:45:29 -08:00
Linus Torvalds
8b9ed79c2d - Move the 32-bit memmove() asm implementation out-of-line in order to
fix a 32-bit full LTO build failure with clang where it would fail at
 register allocation. Move it to an asm file and clean it up while at it,
 similar to what has been already done on 64-bit
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYYQMACgkQEsHwGGHe
 VUqs3xAAvc1nsW0FiR3DWE7+k9jti8OwDMRt51n/zX9wjVrYeJM/6pLNqu+rBnLQ
 A18dhRMVm2QKcxh06bcth/B1V0zvYUMRaOrucjAMkBQ/XAVsEEt3ZSgklj7rYm1S
 phG+YhzxJWP9KdmiN29kfBj6kS9QdYYHQyca1KWxTlggWSIwlCvIzQ8k9ip8s/5W
 9fxiU/P9KA8a4aEkzeQ+waytylus8Swbl19zjnmfHswCi+l2ekS9PfXDE190ec01
 ePSLn2dX1bbPCIIvKD7z6gWR7BOJLpVTv2ftg4XzcozZ7ebBaaQxXczhTvUPOtG0
 NOuYTz4hI+AcG5QZU8JgGbDXqS//NLIklwydfXgS1fNiwudmO62Y734mL8MV0aw7
 FVy7zTXamHb0D10ES0e9tL5GLSTYs0NZ6/193PNERUEdUWj/Ix9FPbuw53DYs3gh
 7BkZPRsrOJYmAtTG5fg44SMyG2MHsfsU7+3Xl0nHUKihgdZi7YdmuhLqXnhczCwe
 HvQFgUF3d5oRjcApYLJKHP88XnPH7o5ogIRXL1WEiZ0+SgChAzckKdVjjYrd3FLq
 ppnr7uZQCJaT4YoL+zqcQEQD0ukC4BfhlxmXj1IuSlpqnIXOf+JD0WOF3/twErLm
 g8PE+PYkm+am6TAFDDU/45/DqpEJ+vCD1SJNfRtDeS4piFV0OzQ=
 =hby2
 -----END PGP SIGNATURE-----

Merge tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Borislav Petkov:

 - Move the 32-bit memmove() asm implementation out-of-line in order to
   fix a 32-bit full LTO build failure with clang where it would fail at
   register allocation.

   Move it to an asm file and clean it up while at it, similar to what
   has been already done on 64-bit

* tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem: Move memmove to out of line assembler
2022-12-13 14:40:54 -08:00
Linus Torvalds
fc4c9f4504 EFI updates for v6.2:
- Refactor the zboot code so that it incorporates all the EFI stub
   logic, rather than calling the decompressed kernel as a EFI app.
 - Add support for initrd= command line option to x86 mixed mode.
 - Allow initrd= to be used with arbitrary EFI accessible file systems
   instead of just the one the kernel itself was loaded from.
 - Move some x86-only handling and manipulation of the EFI memory map
   into arch/x86, as it is not used anywhere else.
 - More flexible handling of any random seeds provided by the boot
   environment (i.e., systemd-boot) so that it becomes available much
   earlier during the boot.
 - Allow improved arch-agnostic EFI support in loaders, by setting a
   uniform baseline of supported features, and adding a generic magic
   number to the DOS/PE header. This should allow loaders such as GRUB or
   systemd-boot to reduce the amount of arch-specific handling
   substantially.
 - (arm64) Run EFI runtime services from a dedicated stack, and use it to
   recover from synchronous exceptions that might occur in the firmware
   code.
 - (arm64) Ensure that we don't allocate memory outside of the 48-bit
   addressable physical range.
 - Make EFI pstore record size configurable
 - Add support for decoding CXL specific CPER records
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmOTQ1cACgkQw08iOZLZ
 jyQRkAv+LqaZFWeVwhAQHiw/N3RnRM0nZHea6++D2p1y/ZbCpwv3pdLl2YHQ1KmW
 wDG9Nr4C1ITLtfy1YZKeYpwloQtq9S1GZDWnFpVv/hdo7L924eRAwIlxowWn1OnP
 ruxv2PaYXyb0plh1YD1f6E1BqrfUOtajET55Kxs9ZsxmnMtDpIX3NiYy4LKMBIZC
 +Eywt41M3uBX+wgmSujFBMVVJjhOX60WhUYXqy0RXwDKOyrz/oW5td+eotSCreB6
 FVbjvwQvUdtzn4s1FayOMlTrkxxLw4vLhsaUGAdDOHd3rg3sZT9Xh1HqFFD6nss6
 ZAzAYQ6BzdiV/5WSB9meJe+BeG1hjTNKjJI6JPO2lctzYJqlnJJzI6JzBuH9vzQ0
 dffLB8NITeEW2rphIh+q+PAKFFNbXWkJtV4BMRpqmzZ/w7HwupZbUXAzbWE8/5km
 qlFpr0kmq8GlVcbXNOFjmnQVrJ8jPYn+O3AwmEiVAXKZJOsMH0sjlXHKsonme9oV
 Sk71c6Em
 =JEXz
 -----END PGP SIGNATURE-----

Merge tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI updates from Ard Biesheuvel:
 "Another fairly sizable pull request, by EFI subsystem standards.

  Most of the work was done by me, some of it in collaboration with the
  distro and bootloader folks (GRUB, systemd-boot), where the main focus
  has been on removing pointless per-arch differences in the way EFI
  boots a Linux kernel.

   - Refactor the zboot code so that it incorporates all the EFI stub
     logic, rather than calling the decompressed kernel as a EFI app.

   - Add support for initrd= command line option to x86 mixed mode.

   - Allow initrd= to be used with arbitrary EFI accessible file systems
     instead of just the one the kernel itself was loaded from.

   - Move some x86-only handling and manipulation of the EFI memory map
     into arch/x86, as it is not used anywhere else.

   - More flexible handling of any random seeds provided by the boot
     environment (i.e., systemd-boot) so that it becomes available much
     earlier during the boot.

   - Allow improved arch-agnostic EFI support in loaders, by setting a
     uniform baseline of supported features, and adding a generic magic
     number to the DOS/PE header. This should allow loaders such as GRUB
     or systemd-boot to reduce the amount of arch-specific handling
     substantially.

   - (arm64) Run EFI runtime services from a dedicated stack, and use it
     to recover from synchronous exceptions that might occur in the
     firmware code.

   - (arm64) Ensure that we don't allocate memory outside of the 48-bit
     addressable physical range.

   - Make EFI pstore record size configurable

   - Add support for decoding CXL specific CPER records"

* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  arm64: efi: Execute runtime services from a dedicated stack
  arm64: efi: Limit allocations to 48-bit addressable physical region
  efi: Put Linux specific magic number in the DOS header
  efi: libstub: Always enable initrd command line loader and bump version
  efi: stub: use random seed from EFI variable
  efi: vars: prohibit reading random seed variables
  efi: random: combine bootloader provided RNG seed with RNG protocol output
  efi/cper, cxl: Decode CXL Error Log
  efi/cper, cxl: Decode CXL Protocol Error Section
  efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
  efi: x86: Move EFI runtime map sysfs code to arch/x86
  efi: runtime-maps: Clarify purpose and enable by default for kexec
  efi: pstore: Add module parameter for setting the record size
  efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
  efi: memmap: Move manipulation routines into x86 arch tree
  efi: memmap: Move EFI fake memmap support into x86 arch tree
  efi: libstub: Undeprecate the command line initrd loader
  efi: libstub: Add mixed mode support to command line initrd loader
  efi: libstub: Permit mixed mode return types other than efi_status_t
  ...
2022-12-13 14:31:47 -08:00
Linus Torvalds
717e6eb49b integrity-v6.2
-----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY5ekGxQcem9oYXJAbGlu
 dXguaWJtLmNvbQAKCRDLwZzRsCrn5QLyAQC+olx4ImpAgFXoeYaZOiZr08ziAIlb
 hQ8rae6hFWecCgD/SZmDtOQ39UGobWbpj+GqwZvx8iJwKPCu9YzQ7Rjo7QE=
 =MywK
 -----END PGP SIGNATURE-----

Merge tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Aside from the one cleanup, the other changes are bug fixes:

  Cleanup:

   - Include missing iMac Pro 2017 in list of Macs with T2 security chip

  Bug fixes:

   - Improper instantiation of "encrypted" keys with user provided data

   - Not handling delay in updating LSM label based IMA policy rules
     (-ESTALE)

   - IMA and integrity memory leaks on error paths

   - CONFIG_IMA_DEFAULT_HASH_SM3 hash algorithm renamed"

* tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix hash dependency to correct algorithm
  ima: Fix misuse of dereference of pointer in template_desc_init_fields()
  integrity: Fix memory leakage in keyring allocation error path
  ima: Fix memory leak in __ima_inode_hash()
  ima: Handle -ESTALE returned by ima_filter_rule_match()
  ima: Simplify ima_lsm_copy_rule
  ima: Fix a potential NULL pointer access in ima_restore_measurement_list
  efi: Add iMac Pro 2017 to uefi skip cert quirk
  KEYS: encrypted: fix key instantiation with user-provided data
2022-12-13 14:22:50 -08:00
Linus Torvalds
8fa37a6835 sysctl changes for v6.2-rc1
Only step forward on the sysctl cleanups for this cycle. This
 has been on linux-next since September and this time it goes
 with a "Yeah, think so, it just moves stuff around a bit" from
 Peter Zijlstra.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmOYC3sSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinVEYQAL6/3nRt854jULd3zRwrWDyJZd5yxbnc
 R8jJBTt3q4CKwtMqd59uQqVYLpSqOCx/GsArfsXkmY4x7KYhlaSKcC4LHmFS8Z/u
 dofyVKumIFqtXMI+hYuTyqNqfGoK9UKXUftrqYb8pK+K3h73uqYbrDgSex4G9GJo
 Au0/WeDjTzLlgqt7RPN7n0PL2jMtfWVQkr3001OCQOWW9sdrOjtprn/3bDTUnW5q
 KukKB5saU0CvUzrTn2DaweQiRCJxQfCQfy3DZfhDRHVuWFYMV9b1okaGEoVmQlQT
 I9/urfdf3aLCdBBxCQG5W6uRxZwZ2Yb93M+rijZNWNFMC6WHrMCmSiADwz9LJzIK
 iQV7LoolGe1TFTEVJbsde5xKSF6BeId0IF5mmPQuokAx3TPE9279HNgluaB/38c8
 p3P4+mP6qE12mMPyhpwDwNOzEWgUnLsGSIE5n/WPwxCiGNa7UsN2lzMDP1cJejp5
 NlRg1hRKmgt30d9+t9sHeKMcWhrjxyPGsyUMwBJTuMCHbjqizGyBsB8DzyK95OoF
 aN66pyRqwsK0+IUivd8VfLgfriE2gDrQD5VqkJ8lfWBx9pq8RMEq7zQ1eE9IbCff
 hzbfG+7k9R3o4SPfJYmCBXtp6fcq+ovjbLYSvGGCJk0zfFe6SQE21rZ3hCQPq3v5
 xKFh05xUfbRF
 =M48U
 -----END PGP SIGNATURE-----

Merge tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull sysctl updates from Luis Chamberlain:
 "Only a small step forward on the sysctl cleanups for this cycle"

* tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sched: Move numa_balancing sysctls to its own file
2022-12-13 14:16:44 -08:00
Shikang Fan
47ea20762b drm/amdgpu: Add an extra evict_resource call during device_suspend.
- evict_resource is taking too long causing sriov full access mode timeout.
  So, add an extra evict_resource in the beginning as an early evict.

Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-13 17:10:32 -05:00
Linus Torvalds
3ba2c3ff98 modules changes for v6.2-rc1
Tux gets for xmass improving the average lookup performance of
 kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which
 upgraded our old implementation from being O(n) to O(log(n)), while also
 retaining the old implementation support on /proc/kallsyms. The only
 penalty was increasing the memory footprint by 3 * kallsyms_num_syms.
 Folks who want to improve this further now also have a dedicated selftest
 facility through KALLSYMS_SELFTEST. Since I had to start reviewing other
 future kallsyms / modules enhancements by Nick Alcock (his stuff is not
 merged, it requires more work) I carefully reviewed and merged Zhen Lei's
 kallsyms changes through modules-next tree a bit less than a month ago.
 So this has been exposed on linux-next for about a month now with no
 reported regressions.
 
 Stephen Boyd added zstd in-kernel decompression support, but the only
 users of this would be folks using the load-pin LSM because otherwise
 we do module docompression in userspace. This is the newest code and
 was merged last week on modules-next.
 
 We spent a lot of time analyzing and coming to grips with a proper
 fix to an old modules regression which only recently came to light
 (since v5.3-rc1, May 2019) but even though I merged that fix onto
 modules-next last week I'm having second thoughts about it now as I was
 writing about that fix in this git tag message for you, as I found a few
 things we cannot quite justify there yet. So I'm going to push back to the
 drawing board again there until all i's are properly dotted. Yes, it's a
 regression but the issue has been there for 2 years now and it came up
 because of high end CPU count, it can wait a *tiny* bit more for a proper
 fix.
 
 The only other thing with mentioning is a minor boot time optimization by
 Rasmus Villemoes which deferes param_sysfs_init() to late init. The rest
 is cleanups and minor fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmOX54cSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinFSgP/AxBdTOljYoqHnIL2/5f7PO2epSUq4Yu
 h42kE7aQ9qbiR9Rq2piCmD0SmeroVBIfxoMJwxnTuUy5IeujLXe6mtt7nG7Z96H1
 mFxBCF63LqE/VUp/bYTusJkOPLksmhK2tCo5zMEnrRuhDAMrbFRc/S3jGm15P3/v
 /hdzh384Ou4cEQPQY6nsMwSvYsuNeYAhE/BqhkrQ1LDOAgSGx8DUp4db7i1/gmxG
 PAu7CPJEdEGljSHhG7v7PmqYYAyhyMRsW2WkCndQUvpcfZ3Q5abMFMa+9DQuT0j9
 VIJtIFMZzgC+wy+1HB2hdhVcfYj1cGul0DIKugbJ9obTrIEiB8BFSaNluZroKXkU
 MIB/rlQCU8kkiw5CocTwM7APHPyv5sZf97oYm9MHcRE2QYYq+o4XKul3Pl2vcEB7
 Cetbdxv+rUGl4Qm0U9AbXzZijwOnRu0XZShy4FTjwhipBSER93hGzYph9beSS+sb
 QLnDK1c6fATT9Ye95w9Oq7/4wdK5yDifRLwA57qo4oKNz4F4MhToPcIQbhLtU2IC
 NHWa5udylfbpNf2MnpCw0040b1hUV8atUxwZ2kBMPH/5bodXzQBKZkQEpzdPyOD8
 sihPRlVmiVVXwRMxtQtFZXpb4l9Zg9YTEFMAA1ixgT1Gefh1VjAMAfOmy/hqiqBp
 x5CXDwftRckB
 =acEB
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull modules updates from Luis Chamberlain:
 "Tux gets for xmas an improvement to the average lookup performance of
  kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which
  upgraded our old implementation from being O(n) to O(log(n)), while
  also retaining the old implementation support on /proc/kallsyms.

  The only penalty was increasing the memory footprint by 3 *
  kallsyms_num_syms. Folks who want to improve this further now also
  have a dedicated selftest facility through KALLSYMS_SELFTEST.

  Stephen Boyd added zstd in-kernel decompression support, but the only
  users of this would be folks using the load-pin LSM because otherwise
  we do module decompression in userspace.

  The only other thing with mentioning is a minor boot time optimization
  by Rasmus Villemoes which deferes param_sysfs_init() to late init. The
  rest is cleanups and minor fixes"

* tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication
  module/decompress: Support zstd in-kernel decompression
  kallsyms: Remove unneeded semicolon
  kallsyms: Add self-test facility
  livepatch: Use kallsyms_on_each_match_symbol() to improve performance
  kallsyms: Add helper kallsyms_on_each_match_symbol()
  kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]
  kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y
  kallsyms: Improve the performance of kallsyms_lookup_name()
  scripts/kallsyms: rename build_initial_tok_table()
  module: Fix NULL vs IS_ERR checking for module_get_next_page
  kernel/params.c: defer most of param_sysfs_init() to late_initcall time
  module: Remove unused macros module_addr_min/max
  module: remove redundant module_sysfs_initialized variable
2022-12-13 14:05:39 -08:00
Linus Torvalds
0015edd6f6 A pile of clk driver updates with a small tracepoint patch to the clk core this
time around. The core framework is effectively unchanged, with the majority of
 the diff going to the Qualcomm clk driver directory because they added two 3k
 line files that are almost all clk data (Abel Vesa from Linaro tried to shrink
 the number of lines down, but it doesn't seem to be possible without
 sacrificing readability). The second big driver this time around is the
 Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines.
 
 Ignoring the big clk drivers from the familiar SoC vendors, there's just a
 bunch of little clk driver updates and fixes throughout here. It's the usual
 set of clk data fixups to describe proper parents, or add frequencies to
 frequency tables, or plug memory leaks when function calls fail. Also, some
 drivers are converted to use modern clk_hw APIs, which is always nice to see.
 And data is deduplicated, leading to a smaller kernel Image. Overall this batch
 has a larger collection of cleanups than it typically does. Maybe that means
 there are less new SoCs right now that need supporting, and the focus has
 shifted to quality and reliability. I can dream.
 
 New Drivers:
  - Frequency hopping controller hardware on MediaTek MT8186
  - Global clock controller for Qualcomm SM8550
  - Display clock controller for Qualcomm SC8280XP
  - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
  - CPU PLL on MStar/SigmaStar SoCs
  - Support for the clock and reset unit of the Rockchip rk3588
 
 Updates:
  - Tracepoints for clk_rate_request structures
  - Debugfs support for fractional divider clk
  - Make MxL's CGU driver secure compatible
  - Ingenic JZ4755 SoC clk support
  - Support audio clks on X1000 SoCs
  - Remove flags from univ/main/syspll child fixed factor clocks across
    MediaTek platforms
  - Fix clock dependency for ADC on MediaTek MT7986
  - Fix parent for FlexSPI clock for i.MX93
  - Add USB suspend clock on i.MX8MP
  - Unmap anatop base on error for i.MX93 driver
  - Change enet clock parent to wakeup_axi_root for i.MX93
  - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
  - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
  - Add 320MHz and 640MHz entries to PLL146x
  - Add audio shared gate and SAI clocks for i.MX8MP
  - Fix a possible memory leak in the error path of rockchip PLL creation
  - Fix header guard for V3S clocks
  - Add IR module clock for f1c100s
  - Correct the parent clocks for the (High Speed) Serial Communication
    Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
    Switch clocks on Renesas R-Car S4-8
  - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
    R-Car V4H
  - Two PLL driver fixups for the Amlogic clk driver
  - Round SD clock rate to improve parent clock selection
  - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
    S4-8
  - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial
    (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks
    on Renesas R-Car V4H
  - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
    Renesas RZ/G2L
  - Fix endless loop on Renesas RZ/N1
  - Correct the parent clocks for the High Speed Serial Communication
    Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
    Note: HSCIF0 is used for the serial console on the White-Hawk
    development board
  - Various clk DT binding improvements and conversions to YAML
  - Qualcomm SM8150/SM8250 display clock controller cleaned up
  - Some missing clocks for Qualcomm SM8350 added
  - Qualcomm MSM8974 Global and Multimedia clock controllers transitioned
    to parent_data and parent_hws
  - Use parent_data and add network resets for Qualcomm IPQ8074
  - Qualcomm Krait clock controller modernized
  - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
    controllers
  - Enable retention mode on Qualcomm SM8250 USB GDSCs
  - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
    clocks which definition could be shared between platforms
  - Various NULL pointer checks added for allocations
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmOXq7wRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSU2sg/+JIguM/vYw92d3hGePFKaz5lmFXSjzRXp
 HMbbnuclAzc/C7jKGwypP2GMdVxOPvzxG4cW9Q25cTw4SuELg2nIBn9UvRteCEDA
 uGf8h0Xw/sJfyRhZbAlnbLxtn3qntQL8F2VbPJ+umDYnghD0Mq0WBMeHEoeXGXpb
 PVdEYsgpHo3EbgCL8rjErw9XDHBTGRgNXPounpKjD3Kwmj+CXWgopsma7Hzf2G/6
 VxBbcxDZA6OaEzJAKGVeIHBYLwY0aGPP2ouC2RQDBzSb7n6PjqDkOCdP6w1ab9Nl
 XehAup5p5Zgd314YgQlE9BoXwhXanZyVT88D6WbfN+qjksDm9n+W+5O9suN2eLrt
 h+YgmFdUAESUAJTbIyF6tiLUEIDKjKrJyU+HZX0peOhGIYbw3fMUACR+JrCbmCCZ
 rTTOWh92q7v39to+QIFsKwtVLl9IlRTCaA3tbhv/FH2gplJlOhvPgulAfV+JRtTZ
 1YND5adsFNsc69ZK8TTT2NzXUnU0XhocNNL1SegYXZpfHoNmg5CUQiPYMMASCJcI
 V1+qznLUeUUonkhexFTMrJHGL4e4ITzESi7IOTVcJ6Wco+gXOrOMHfONbahEsCYn
 UQIPC9tw9qwV6D3Sf9C8zFtBP26w7+UuJ8ZFpmhpf+fevF5i2TsG6x7Y31mlxzww
 OZ+r5dsauc4=
 =6vbl
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk driver updates from Stephen Boyd:
 "A pile of clk driver updates with a small tracepoint patch to the clk
  core this time around.

  The core framework is effectively unchanged, with the majority of the
  diff going to the Qualcomm clk driver directory because they added two
  3k line files that are almost all clk data (Abel Vesa from Linaro
  tried to shrink the number of lines down, but it doesn't seem to be
  possible without sacrificing readability).

  The second big driver this time around is the Rockchip rk3588 clk and
  reset unit, at _only_ 2.5k lines.

  Ignoring the big clk drivers from the familiar SoC vendors, there's
  just a bunch of little clk driver updates and fixes throughout here.

  It's the usual set of clk data fixups to describe proper parents, or
  add frequencies to frequency tables, or plug memory leaks when
  function calls fail. Also, some drivers are converted to use modern
  clk_hw APIs, which is always nice to see. And data is deduplicated,
  leading to a smaller kernel Image.

  Overall this batch has a larger collection of cleanups than it
  typically does. Maybe that means there are less new SoCs right now
  that need supporting, and the focus has shifted to quality and
  reliability. I can dream.

  New Drivers:
   - Frequency hopping controller hardware on MediaTek MT8186
   - Global clock controller for Qualcomm SM8550
   - Display clock controller for Qualcomm SC8280XP
   - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
   - CPU PLL on MStar/SigmaStar SoCs
   - Support for the clock and reset unit of the Rockchip rk3588

  Updates:
   - Tracepoints for clk_rate_request structures
   - Debugfs support for fractional divider clk
   - Make MxL's CGU driver secure compatible
   - Ingenic JZ4755 SoC clk support
   - Support audio clks on X1000 SoCs
   - Remove flags from univ/main/syspll child fixed factor clocks across
     MediaTek platforms
   - Fix clock dependency for ADC on MediaTek MT7986
   - Fix parent for FlexSPI clock for i.MX93
   - Add USB suspend clock on i.MX8MP
   - Unmap anatop base on error for i.MX93 driver
   - Change enet clock parent to wakeup_axi_root for i.MX93
   - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
   - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
   - Add 320MHz and 640MHz entries to PLL146x
   - Add audio shared gate and SAI clocks for i.MX8MP
   - Fix a possible memory leak in the error path of rockchip PLL
     creation
   - Fix header guard for V3S clocks
   - Add IR module clock for f1c100s
   - Correct the parent clocks for the (High Speed) Serial Communication
     Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
     Switch clocks on Renesas R-Car S4-8
   - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
     R-Car V4H
   - Two PLL driver fixups for the Amlogic clk driver
   - Round SD clock rate to improve parent clock selection
   - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
     S4-8
   - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
     serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
     (RPC-IF) clocks on Renesas R-Car V4H
   - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
     Renesas RZ/G2L
   - Fix endless loop on Renesas RZ/N1
   - Correct the parent clocks for the High Speed Serial Communication
     Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
     Note: HSCIF0 is used for the serial console on the White-Hawk
     development board
   - Various clk DT binding improvements and conversions to YAML
   - Qualcomm SM8150/SM8250 display clock controller cleaned up
   - Some missing clocks for Qualcomm SM8350 added
   - Qualcomm MSM8974 Global and Multimedia clock controllers
     transitioned to parent_data and parent_hws
   - Use parent_data and add network resets for Qualcomm IPQ8074
   - Qualcomm Krait clock controller modernized
   - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
     controllers
   - Enable retention mode on Qualcomm SM8250 USB GDSCs
   - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
     clocks which definition could be shared between platforms
   - Various NULL pointer checks added for allocations"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
  clk: nomadik: correct struct name kernel-doc warning
  clk: lmk04832: fix kernel-doc warnings
  clk: lmk04832: drop superfluous #include
  clk: lmk04832: drop unnecessary semicolons
  clk: lmk04832: declare variables as const when possible
  clk: socfpga: Fix memory leak in socfpga_gate_init()
  clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
  clk: st: Fix memory leak in st_of_quadfs_setup()
  clk: samsung: Fix memory leak in _samsung_clk_register_pll()
  clk: Add trace events for rate requests
  clk: Store clk_core for clk_rate_request
  clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
  clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: mmcc-msm8974: move clock parent tables down
  clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: gcc-msm8974: move clock parent tables down
  clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
  dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
  ...
2022-12-13 13:46:07 -08:00
Linus Torvalds
71946a25f3 MMC core:
- A few minor improvements and cleanups
 
 MMC host:
  - Remove some redundant calls to local_irq_{save,restore}()
  - Replace kmap_atomic() with kmap_local_page()
  - Take return values from mmc_add_host() into account
  - dw_mmc-pltfm: Add support to configure clk-phase for socfpga
  - hsq: Minimize latency by using a fifo to dispatch requests
  - litex_mmc: Fixup corner case for polling mode
  - mtk-sd: Add inline crypto engine clock control
  - mtk-sd: Add support for the mediatek MT7986 variant
  - renesas_sdhi: Improve reset from HS400 mode
  - renesas_sdhi: Take DMA end interrupts into account
  - sdhci: Avoid unnecessary update of clock
  - sdhci: Fix an SD tuning issue
  - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
  - sdhci-esdhc-imx: Improve tuning logic
  - sdhci-esdhc-imx: Improve support for the imxrt1050 variant
  - sdhci_f_sdh30: Add support for non-removable media
  - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
  - sdhci_f_sdh30: Add reset control support
  - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
  - sdhci-msm: Add support for the Qcom MSM8976 variant
  - sdhci-of-arasan: Add support for dynamic configuration
  - sdhci-of-esdhc: Limit the clock frequency to confirm to spec
  - sdhci-pci: Enable asynchronous probe
  - sdhci-sprd: Improve card detection
  - sdhci-tegra: Improve reset support
  - sdhci-tegra: Add support to program MC stream ID
  - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
  - vub300: Fix warning splat for SDIO irq
 
 MEMSTICK core:
  - memstick: A few minor improvements and cleanups
 
 CLK/IOMMU:
  - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
  - iommu: Add tegra specific helper to get stream_id
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmOYUeUXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnUmA//cdC4gF86ROp+d2lKZVHn9FVK
 jgF0NJ9DZiDOZm7qta7rqmAGo/Xq9sacHq65qGjXMeei/MNrwu7xW/U3Ihk0pK9z
 Gnphck3JgbkLJ6ijxsuBqNavsYjXJVqys3f2qThXYh+xXyLAfIvOtPj9984EfdvR
 AtZuTwpvebNxB6Qu6SFIYZ4Yt4ZaTN/AuCRyjS9HHNLugjbgditZQcw6wjqlTRb7
 fhSNwK3srWGzdthtiiXBoFSjjpd7AESGPjqaGDJNgIDYxFXOUX2vx2eb15s1beVN
 i7pN8D83StNjF+PF551trUyNCaW4Ukbl7hHTqC9sFvjgtRFVB97oSoxm7F03fsX3
 bM6USXtG1xOGkPG9Dqneuhee157UCgNIWs46H/CuZYmGgBN6I7l0Jt3+Lru5IwwQ
 NstKcLS6xaWyYOEAoAR5yFDJXBagxEXNArtHkzoLabvcsk0XPdGAMd87RUuyGgXt
 Vpd4VjH1VSDcaG7DF3+XR3uTy5mUAOrehBrVr1eKH7gYRpr4TLlYgE/a3AkSs/m+
 3ftM3o6hraHKqwY32vDG9vSsuLrGdh286rEypmc1gmejiNTz+SFSIex1YoefWtx2
 O0u+7plcauuUX+7EQ79RzZkB/FS40uL3wxAii7Ta+on4P7Cwuh6jo1Hakvy5JjtW
 5733RKV5nkKUkKMOwsU=
 =nstz
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - A few minor improvements and cleanups

  MMC host:
   - Remove some redundant calls to local_irq_{save,restore}()
   - Replace kmap_atomic() with kmap_local_page()
   - Take return values from mmc_add_host() into account
   - dw_mmc-pltfm: Add support to configure clk-phase for socfpga
   - hsq: Minimize latency by using a fifo to dispatch requests
   - litex_mmc: Fixup corner case for polling mode
   - mtk-sd: Add inline crypto engine clock control
   - mtk-sd: Add support for the mediatek MT7986 variant
   - renesas_sdhi: Improve reset from HS400 mode
   - renesas_sdhi: Take DMA end interrupts into account
   - sdhci: Avoid unnecessary update of clock
   - sdhci: Fix an SD tuning issue
   - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
   - sdhci-esdhc-imx: Improve tuning logic
   - sdhci-esdhc-imx: Improve support for the imxrt1050 variant
   - sdhci_f_sdh30: Add support for non-removable media
   - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
   - sdhci_f_sdh30: Add reset control support
   - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
   - sdhci-msm: Add support for the Qcom MSM8976 variant
   - sdhci-of-arasan: Add support for dynamic configuration
   - sdhci-of-esdhc: Limit the clock frequency to confirm to spec
   - sdhci-pci: Enable asynchronous probe
   - sdhci-sprd: Improve card detection
   - sdhci-tegra: Improve reset support
   - sdhci-tegra: Add support to program MC stream ID
   - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
   - vub300: Fix warning splat for SDIO irq

  MEMSTICK core:
   - memstick: A few minor improvements and cleanups

  CLK/IOMMU:
   - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
   - iommu: Add tegra specific helper to get stream_id"

* tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
  mmc: sdhci-of-esdhc: Modify mismatched function name
  memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  mmc: sdhci-tegra: Issue CMD and DAT resets together
  mmc: sdhci-tegra: Add support to program MC stream ID
  mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data
  mmc: sdhci-tegra: Sort includes alphabetically
  iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper
  iommu: Add note about struct iommu_fwspec usage
  mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n
  dt-bindings: mmc: sdhci-msm: allow dma-coherent
  dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC
  dt-bindings: mmc: sdhci-msm: cleanup style
  dt-bindings: mmc: sdhci-am654: cleanup style
  dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask
  mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
  MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver
  mmc: sdhci-of-esdhc: limit the SDHC clock frequency
  mmc: sdhci: Remove unneeded semicolon
  mmc: core: Normalize the error handling branch in sd_read_ext_regs()
  ...
2022-12-13 13:41:26 -08:00
Linus Torvalds
90b12f423d Small fixes, a new SSIF i2c BMC-side interface
This includes a number of small fixes, as usual.
 
 It also includes a new driver for doing the i2c (SSIF) interface
 BMC-side, pretty much completing the BMC side interfaces.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmOYieoACgkQYfOMkJGb
 /4EF6A//UX1SL+OT+NOvFYxr6etcKoY6VGZDlEUbUbUAYFE/vv/aFP2aXr+eHf/o
 Y+hx3WLE5kveoxVcGfkJMRVYiHbC/4d+Z4CLd1PzXx6Tjp20Abpr8uGCZIyy0263
 /gYl+JPmSRXslA46mPImMlTzL/vzsHjoOHVpLCVcv8iDbXKhvqlNEJ2Y8BbNy299
 vNkix6MVDmTCD+PR5LE10myL0X53suHJoAN6CbjmRgIgxFb/tfddtFRIjqb/W8Dk
 JssgYGd+xFHWV/65xnOGbGDWuciBIQSkFL7fWyZpp0OooPJJRL/Hi/l3VVMC1GTA
 y38E+0as+OzQcaHKcG9hnzFWhVtewJYFHL2TZrAv3IbFWjiJwDq7jguraOl5uTAB
 vzIt0ML34oWF4PR/ZYva3aZID5xmNKYMRVHp9cxzNmUKd4XcHfwzKD2C9eVVG5W9
 qQ+7a+L7mC6PwOCE5t+P/Plh0lC9V8eDAVTf4pfXH/vp0o5oreMaJtDKGnCqvyZR
 raU/rmyS8TNYv8iZMItGL8U1h8trYIMVA1SuEzQICpPKd7yITcKuSPIYXLThGUx8
 4XWu8iMfaPcHzeCNtOwrRxXjQ8AeRTGPPkKf25pvvM9ETODyUIUsuMYSE9kNlQjP
 zFCyDbcMPxVx+WD6YptukbY8pNftCiT8wrFbriV8BMDDGMDq5HM=
 =HTb4
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "This includes a number of small fixes, as usual.

  It also includes a new driver for doing the i2c (SSIF) interface
  BMC-side, pretty much completing the BMC side interfaces"

* tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi:
  ipmi/watchdog: use strscpy() to instead of strncpy()
  ipmi: ssif_bmc: Convert to i2c's .probe_new()
  ipmi: fix use after free in _ipmi_destroy_user()
  ipmi/watchdog: Include <linux/kstrtox.h> when appropriate
  ipmi:ssif: Increase the message retry time
  ipmi: Fix some kernel-doc warnings
  ipmi: ssif_bmc: Use EPOLLIN instead of POLLIN
  ipmi: fix msg stack when IPMI is disconnected
  ipmi: fix memleak when unload ipmi driver
  ipmi: fix long wait in unload when IPMI disconnect
  ipmi: kcs: Poll OBF briefly to reduce OBE latency
  bindings: ipmi: Add binding for SSIF BMC driver
  ipmi: ssif_bmc: Add SSIF BMC driver
2022-12-13 13:36:39 -08:00
Linus Torvalds
2043f9a37d for-linus-2022121301
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIVAwUAY5iCHqZi849r7WBJAQKEhRAAqy2xfeg/DSGDhQItEWggL0H+2dPK7KWD
 Rw0ZimOVdRdMENGyoDxyFQ3VFd0/FJBVF7AtALs32zW40S/eAwuds81sklMsr6D1
 9LDalDlkCCyBKDSdNfPTEVgnIhJPiSuHX7HjJdoPUXdiRzEf+TxKaEQuGuhVbizw
 cfKChyKI/o173glvGVkzmA1iqCFPY+/tM6HJCHxxL51wko47wJZ9eubdZoxFpDU7
 mHyqyJYrcjaFh7iPOda77WAIT6gqQFJi9pbH5SBP5Hs/yZPvkw9OZQLrCGx8Zehe
 Trdh0GTBXo67D0UBHiOafqQSj9CqDunBLBOOD4uf5K9CfzIBhyHS7C2rtrY85Lz2
 6/WevKgZ0MuLma87DcDkb2nNEnjQbV8OPcD10qk7k2yDl8SezoOiS+g7rOTo42P1
 80zt68znsEQCJBAqG3X8x+bU767r73FIJlFSERvRz1j0N05EpScIs5NR9cRK/iGB
 1oAxj0H04jOR0K+1mHhPWxIQpE2ypHOLhYlR9RROWbvM9ilJpaCaESHTZYMv83U/
 QuZR4ytH9uqqUIsweK9ExUiu3RK5YEC/H/GuFSORYFl40jB/iRmbRGTKiLNOGraH
 oYE/sIWYUtsPCOLFeIPGG8pd5I9spImlRUkSqBfx803I9SQPG/rx4q7rcol6YOlS
 FwnRlMSGz0Y=
 =KkQc
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

 - iio support for the MCP2221 HID driver (Matt Ranostay)

 - support for more than one hinge sensor in hid-sensor-custom (Yauhen
   Kharuzhy)

 - PS DualShock 4 controller support (Roderick Colenbrander)

 - XP-PEN Deco LW support (José Expósito)

 - other assorted code cleanups and device ID/quirk addtions

* tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (51 commits)
  HID: logitech HID++: Send SwID in GetProtocolVersion
  HID: hid-elan: use default remove for hid device
  HID: hid-alps: use default remove for hid device
  HID: hid-sensor-custom: set fixed size for custom attributes
  HID: i2c: let RMI devices decide what constitutes wakeup event
  HID: playstation: fix DualShock4 bluetooth CRC endian issue.
  HID: playstation: fix DualShock4 bluetooth memory corruption bug.
  HID: apple: Swap Control and Command keys on Apple keyboards
  HID: intel-ish-hid: ishtp: remove variable rb_count
  HID: uclogic: Standardize test name prefix
  HID: hid-sensor-custom: Allow more than one hinge angle sensor
  HID: ft260: fix 'cast to restricted' kernel CI bot warnings
  HID: ft260: missed NACK from busy device
  HID: ft260: fix a NULL pointer dereference in ft260_i2c_write
  HID: ft260: wake up device from power saving mode
  HID: ft260: missed NACK from big i2c read
  HID: ft260: remove SMBus Quick command support
  HID: ft260: skip unexpected HID input reports
  HID: ft260: do not populate /dev/hidraw device
  HID: ft260: improve i2c large reads performance
  ...
2022-12-13 13:32:56 -08:00
Linus Torvalds
86a0b4255e Input updates for 6.2 merge window:
- a new driver for Cypress Generation 5 touchscreens
 
 - a new driver for Hynitron cstxxx touchscreens
 
 - a new driver for Himax hx83112b touchscreen
 
 - I2C input devices have been converted to use i2c's probe_new()
 
 - a large number of input devices are now using DEFINE_SIMPLE_DEV_PM_OPS
   and pm_sleep_ptr() and no longer use __maybe_unused annotations
 
 - improvements to msg2638 touchscreen driver to also support msg2138
 
 - conversion of several input deevine bindings to yaml/DT schema
 
 - changes to select touch drivers to move handling of wake irqs to the
   PM core
 
 - other assorted fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY5d+9wAKCRBAj56VGEWX
 nN9CAP9R1zCdPc5Y2PmLnE6JHc9XynPhUnVbnx4zHieMxw0nHQD/ZnHot+Cdq/+L
 433dkdX50pwK3XxRQgjRaym+efgwfQ0=
 =9m4z
 -----END PGP SIGNATURE-----

Merge tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for Cypress Generation 5 touchscreens

 - a new driver for Hynitron cstxxx touchscreens

 - a new driver for Himax hx83112b touchscreen

 - I2C input devices have been converted to use i2c's probe_new()

 - a large number of input devices are now using
   DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
   __maybe_unused annotations

 - improvements to msg2638 touchscreen driver to also support msg2138

 - conversion of several input deevine bindings to yaml/DT schema

 - changes to select touch drivers to move handling of wake irqs to the
   PM core

 - other assorted fixes and improvements.

* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
  Input: elants_i2c - delay longer with reset asserted
  dt-bindings: input: Convert ti,drv260x to DT schema
  dt-bindings: input: gpio-beeper: Convert to yaml schema
  Input: pxspad - fix unused data warning when force feedback not enabled
  Input: lpc32xx - allow building with COMPILE_TEST
  Input: nomadik-ske-keypad - allow building with COMPILE_TEST
  Input: pxa27xx-keypad - allow build with COMPILE_TEST
  Input: spear-keyboard - improve build coverage using COMPILE_TEST
  Input: tegra-kbc - allow build with COMPILE_TEST
  Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...
2022-12-13 13:20:36 -08:00
Linus Torvalds
531d2644f3 Devicetree updates for v6.2:
DT Bindings:
 - Various LED binding conversions and clean-ups. Convert the ir-spi-led,
   pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently
   reference LED common.yaml or multi-led schemas and disallow undefined
   properties.
 
 - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
   and fsl,imx-fb bindings to schema
 
 - Add ata-generic, Broadcom u-boot environment, and dynamic MTD
   sub-partitions bindings.
 
 - Make all SPI based displays reference spi-peripheral-props.yaml
 
 - Fix some schema property regex's which should be fixed strings or were
   missing start/end anchors
 
 - Remove 'status' in examples, again...
 
 DT Core:
 - Fix a possible NULL dereference in overlay functions
 
 - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
   never worked)
 
 - Add of_address_count() helper to count number of 'reg' entries
 
 - Support .dtso extension for DT overlay source files. Rename staging
   and unittest overlay files.
 
 - Update dtc to upstream v1.6.1-63-g55778a03df61
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmOWhJAACgkQ+vtdtY28
 YcMrAhAAjXJMmhzh97MPN/hUnVy26xVj0IF+pX7AIlHieOZWtc1xFNSqXVblC/n3
 459Id1jKq1Vt8BTX0J4VWIOY/v3qpuGtvT4KpronOr0GV/fGhHkBJa/PTBN2/xvS
 yG27PLL/F5l3adZ8vhmJdcoxDknqL0oSpWpgwRNHveIB+FzjP7z0LveV+vfS0bEO
 nQbM07TMeXzRN+Ld76aEEorsv4uaOrpzBwX76X+F2uAmzsA+3ksLzhULS4551Qxs
 63lCgZ6nIdYVIjsqxNFfFEuBNarYCi4KJw7NZksoM0YSXeijWtWazUxbeEa28+SV
 dB2OaWzwPt5hS3cJhZ9oM+YK2LNlhXOl+e9MK9ZuGnMzEf9JXj4wJhYkxhA5KrB5
 KVXQciYkDm+SbZk9e0AcoV5OqVIvfHfDxTN4ysNe/BHMwMPyyifNvCdx3faiWLVZ
 sMrxb44l3JMrQD70XMSdFYFkuw1KfWXuXRWSvFmixiXkSPQWoQMnuVXYEZfNRqth
 PdPXgqh2KQ7zrjLSZrrKNqBLzHR94UkUuAu8rsDmapWj7KKP48tLoeooMgLvMAJz
 xp7KowVKTim1OSywVWW7UH6gkFagCqI/v9uCxvCTjKutjv9Hzeyask8Z/N/IGhIp
 wG+c1jhFAXhPnbMV7k7QJnPPrpVPM1ZFKVklc6ZaqxumXcCAik0=
 =y/xu
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Various LED binding conversions and clean-ups. Convert the
     ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
     Consistently reference LED common.yaml or multi-led schemas and
     disallow undefined properties.

   - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
     and fsl,imx-fb bindings to schema

   - Add ata-generic, Broadcom u-boot environment, and dynamic MTD
     sub-partitions bindings.

   - Make all SPI based displays reference spi-peripheral-props.yaml

   - Fix some schema property regex's which should be fixed strings or
     were missing start/end anchors

   - Remove 'status' in examples, again...

  DT Core:

   - Fix a possible NULL dereference in overlay functions

   - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
     never worked)

   - Add of_address_count() helper to count number of 'reg' entries

   - Support .dtso extension for DT overlay source files. Rename staging
     and unittest overlay files.

   - Update dtc to upstream v1.6.1-63-g55778a03df61"

* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
  dt-bindings: leds: Add missing references to common LED schema
  dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
  of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
  dt-bindings: lcdif: Fix constraints for imx8mp
  media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
  dt-bindings: Drop Jee Heng Sia
  dt-bindings: thermal: cooling-devices: Add missing cache related properties
  dt-bindings: leds: irled: ir-spi-led: convert to DT schema
  dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
  dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
  dt-bindings: leds: mt6360: rework to match multi-led
  dt-bindings: leds: lp55xx: rework to match multi-led
  dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
  dt-bindings: leds: lp55xx: allow label
  dt-bindings: leds: use unevaluatedProperties for common.yaml
  dt-bindings: thermal: tsens: Add SM6115 compatible
  of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
  dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
  dt-bindings: Add missing start and/or end of line regex anchors
  dt-bindings: qcom,pdc: Add missing compatibles
  ...
2022-12-13 13:13:55 -08:00
Linus Torvalds
4d03390b5c hwmon updates for v6.2 merge window
New drivers
 
 - Driver for OneXPlayer mini AMD sensors
 
 - Ampere's Altra smpro-hwmon driver
 
 New chip and attribute support in existing drivers
 
 - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M
 
 - pmbus/ltc2978: Support for LTC7132
 
 - aquacomputer_d5next: Support for temperature sensor offsets
   and flow sensor pulses
 
 - coretemp: Support for dynamic ttarget and tjmax
 
 Improvements
 
 - Use devm_regulator_get_enable() where appropriate
 
 - Use sysfs_emit() instead of scnprintf()
 
 - Remove some useless #include <linux/hwmon-vid.h>
 
 - Include <linux/kstrtox.h> when appropriate
 
 - Use simple i2c probe
 
 - it87: Check for a valid chip before using force_id, and new
   new module parameter to ignore ACPI resource conflicts
 
 - jc42: Use regmap, and restore min/max/critical temperatures on resume
 
 - Add reporting power good and status to PMBus based regulators
 
 Last minute fixes
 
 - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
   manually if THERMAL is enabled
 
 Various other minor fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmOXLDcACgkQyx8mb86f
 mYFgTw/9GDRiUbSfEYHIrQuao4B8t1QKqdDQbGtM6k0O8DU/CweeMoSWbiAqapFm
 e/G6ae7zTFWYJAVlvgi11P2dby+F8+vx25sxBhUaUu86dijU+H4JqACLnAMDO27h
 alXQyOutLcFz1f7rumo89kbMMwvcOZdMTZAILspOGzt5eYKM1+FVjmDaXb3x8MSZ
 88QxWltjFH/EhEHi41Djwr/r7ZCz8RdeAev5bKIjfC/KYmCAgeHVz/M7iOEyqjQj
 9WWOvjVfKy25gKvfHO1kZF6+9pGFk+Q9ahxWeiBuEhanirE4Y8fGPpnW6aebmyba
 Ya7V7vEBVC15Egzo0ne/289ps7roB/ee6vbfQuQQCvJhJJZOn8n2QcSvDgqLFE4+
 dS5VX3AQ8BVDuVLmD5ZMfX0DHkoPxFOODySZiiWggO3Cf2cJMGb1kjtTYip2BkpI
 hCNrsMK+DyQ3StRfWMm6tdx+9PRVCue1OL2lGhcyDFifSekdFKshMLTPQW0bxxsx
 y/nbL0pPuzXCzgfr+FreK3JrqVwiKuUXa9N2vJDst8YAmW4IYd4yMPytOsURnugd
 xcwNDqn2wcNHIYDSdfby7Y3sI20DiNqVW4qTnP+pfqEG6qsvuaV5yiT+DA7xO7Ur
 fqSPsqDLUyEQ4aDoVnSsYlabpAFTDuhedM95rwLJ7ds8CqobiRY=
 =O7h4
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...
2022-12-13 13:09:38 -08:00
Linus Torvalds
361c89a0da Pin control changes for the v6.2 kernel cycle:
Core changes:
 
 - Minor but nice and important documentation clean-ups.
 
 New drivers:
 
 - New subdriver for the Qualcomm SDM670 SoC.
 
 - New subdriver for the Intel Moorefield SoC.
 
 - New trivial support for the NXP Freescale i.MXRT1170 SoC.
 
 Other changes and improvements
 
 - A major clean-up of the Qualcomm pin control device tree bindings
   by Krzysztof.
 
 - A major header clean-up by Andy.
 
 - Some immutable irqchip clean-up for the Actions Semiconductor
   and Nuvoton drivers.
 
 - GPIO helpers for The Cypress cy8c95x0 driver.
 
 - Bias handling in the Mediatek MT7986 driver.
 
 - Remove the unused pins-are-numbered concept that never flew.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmOXJjQACgkQQRCzN7AZ
 XXOMaxAAuAv30XWa9sq5cMZKOlY3CLudZmxF5V7PSpFwAXiBPcPZu9ajxlaGJaAf
 +KOgJhNKYhTb4mBxsQR3X749qFFlxnbEXo9u7ka2bb5bCEkP6ZooqKSGclzAufrp
 azf1pmJYd2PoaZzwhpuosiWAzLNTeZBQPapU/d9KFIkNhvvY8dFG8YWrjV6YSMTr
 6sPWj7/FCqxAzplrQRUXapS+k5JyihyY4aHcFgJwijN6qmSRCxc49SA4VQvkZQZ3
 AP6NV1sX9JvbfgOm09Uk5doBnX4vyfeEshOq/c+XZVyr+ECzlGQARkgOXpPhPA8S
 28bY6aDaiu5HzOBauM4bp0Z4W7m7YWKWo1cDZNPVEAMF/oATOj/h3YFhLAy66RtV
 8BqEEXKvVwqGu0/utwlB1I+yLXvS0DN9C+TZ2y2aLfkgRHUonRrS1OKa0SSvvQp3
 3eXmwTJgqf01bcK7kkdDr6+1H6lRmol27Gir6We5jdOCu0LqQcSIYhCr0RzSirWm
 CHIZQTfo7J4S7pOrz7lhsFciqEQeQfsKXmSorLHrVNcGamIZZEdRhEqVxufqRU4B
 0hWoNqxjIDcqyZFFUe211OwNWNOUwMdvw5bCVkmhW5e7AylTrOi1ie1b/SlmDxRl
 k7NSVnIXdZmog0fYsSZy6qJM0FfTKXF7smnuZcBvgx61/MoCRDw=
 =PhTP
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "The two large chunks is the header clean-up from Andy and the Qualcomm
  DT bindings clean-up from Krzysztof. Each which could give rise to
  conflicts, but I haven't seen any.

  The YAML conversions happening around the device tree is the biggest
  item in the series and is the result of Rob Herrings ambition to
  autovalidate these trees against strict schemas and it is paying off
  in lots of bugs found and ever prettier device trees. Sooner or later
  the transition will be complete, Krzysztof is fixing up all of the
  Qualcomm stuff, which is pretty voluminous.

  Core changes:

   - minor but nice and important documentation clean-ups

  New drivers:

   - subdriver for the Qualcomm SDM670 SoC

   - subdriver for the Intel Moorefield SoC

   - trivial support for the NXP Freescale i.MXRT1170 SoC

  Other changes and improvements

   - major clean-up of the Qualcomm pin control device tree bindings by
     Krzysztof

   - major header clean-up by Andy

   - some immutable irqchip clean-up for the Actions Semiconductor and
     Nuvoton drivers

   - GPIO helpers for The Cypress cy8c95x0 driver

   - bias handling in the Mediatek MT7986 driver

   - remove the unused pins-are-numbered concept that never flew"

* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
  pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
  dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
  dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
  pinctrl: stm32: Remove check for pins-are-numbered
  pinctrl: mediatek: common: Remove check for pins-are-numbered
  pinctrl: qcom: remove duplicate included header files
  pinctrl: sunxi: d1: Add CAN bus pinmuxes
  pinctrl: loongson2: Fix some const correctness
  pinctrl: pinconf-generic: add missing of_node_put()
  pinctrl: intel: Enumerate PWM device when community has a capability
  pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
  pwm: lpss: Allow other drivers to enable PWM LPSS
  pwm: lpss: Include headers we are the direct user of
  pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
  pwm: Add a stub for devm_pwmchip_add()
  pinctrl: k210: call of_node_put()
  pinctrl: starfive: Use existing variable gpio
  dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
  pinconf-generic: fix style issues in pin_config_param doc
  pinctrl: pinctrl-loongson2: fix Kconfig dependency
  ...
2022-12-13 13:03:06 -08:00