In Kbuild, some files are generated by chains of pattern/implicit rules.
For example, *.dtb.o files in drivers/of/unittest-data/Makefile are
generated by the chain of 3 pattern rules, like this:
%.dts -> %.dtb -> %.dtb.S -> %.dtb.o
Here, %.dts is the real source, %.dtb.o is the final target.
%.dtb and %.dtb.S are called "intermediate files".
As GNU Make manual [1] says, intermediate files are treated differently
in two ways:
(a) The first difference is what happens if the intermediate file does
not exist. If an ordinary file 'b' does not exist, and make considers
a target that depends on 'b', it invariably creates 'b' and then
updates the target from 'b'. But if 'b' is an intermediate file, then
make can leave well enough alone: it won't create 'b' unless one of
its prerequisites is out of date. This means the target depending
on 'b' won't be rebuilt either, unless there is some other reason
to update that target: for example the target doesn't exist or a
different prerequisite is newer than the target.
(b) The second difference is that if make does create 'b' in order to
update something else, it deletes 'b' later on after it is no longer
needed. Therefore, an intermediate file which did not exist before
make also does not exist after make. make reports the deletion to
you by printing a 'rm' command showing which file it is deleting.
The combination of these is problematic for Kbuild because most of the
build rules depend on FORCE and the if_changed* macros really determine
if the target should be updated. So, all missing files, whether they
are intermediate or not, are always rebuilt.
To see the problem, delete ".SECONDARY:" from scripts/Kbuild.include,
and repeat this command:
$ make allmodconfig drivers/of/unittest-data/
The intermediate files will be deleted, which results in rebuilding
intermediate and final objects in the next run of make.
In the old days, people suppressed (b) in inconsistent ways.
As commit 54a702f705 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers") noted, you should not use .PRECIOUS because
.PRECIOUS has the following behavior (c), which is not likely what you
want.
(c) If make is killed or interrupted during the execution of their
recipes, the target is not deleted. Also, the target is not deleted
on error even if .DELETE_ON_ERROR is specified.
.SECONDARY is a much better way to disable (b), but a small problem
is that .SECONDARY enables (a), which gives a side-effect to $?;
prerequisites marked as .SECONDARY do not appear in $?. This is a
drawback for Kbuild.
I thought it was a bug and opened a bug report. As Paul, the GNU Make
maintainer, concluded in [2], this is not a bug.
A good news is that, GNU Make 4.4 added the perfect solution,
.NOTINTERMEDIATE, which cancels both (a) and (b).
For clarificaton, my understanding of .INTERMEDIATE, .SECONDARY,
.PRECIOUS and .NOTINTERMEDIATE are as follows:
(a) (b) (c)
.INTERMEDIATE enable enable disable
.SECONDARY enable disable disable
.PRECIOUS disable disable enable
.NOTINTERMEDIATE disable disable disable
However, GNU Make 4.4 has a bug for the global .NOTINTERMEDIATE. [3]
It was fixed by commit 6164608900ad ("[SV 63417] Ensure global
.NOTINTERMEDIATE disables all intermediates"), and will be available
in the next release of GNU Make.
The following is the gain for .NOTINTERMEDIATE:
[Current Make]
$ make allnoconfig vmlinux
[ full build ]
$ rm include/linux/device.h
$ make vmlinux
CALL scripts/checksyscalls.sh
Make does not notice the removal of <linux/device.h>.
[Future Make]
$ make-latest allnoconfig vmlinux
[ full build ]
$ rm include/linux/device.h
$ make-latest vmlinux
CC arch/x86/kernel/asm-offsets.s
In file included from ./include/linux/writeback.h:13,
from ./include/linux/memcontrol.h:22,
from ./include/linux/swap.h:9,
from ./include/linux/suspend.h:5,
from arch/x86/kernel/asm-offsets.c:13:
./include/linux/blk_types.h:11:10: fatal error: linux/device.h: No such file or directory
11 | #include <linux/device.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
make-latest[1]: *** [scripts/Makefile.build:114: arch/x86/kernel/asm-offsets.s] Error 1
make-latest: *** [Makefile:1282: prepare0] Error 2
Make notices the removal of <linux/device.h>, and rebuilds objects
that depended on <linux/device.h>. There exists a source file that
includes <linux/device.h>, and it raises an error.
To see detailed background information, refer to commit 2d3b1b8f0d
("kbuild: drop $(wildcard $^) check in if_changed* for faster rebuild").
[1]: https://www.gnu.org/software/make/manual/make.html#Chained-Rules
[2]: https://savannah.gnu.org/bugs/?55532
[3]: https://savannah.gnu.org/bugs/?63417
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Refactor Makefile and use read-file macro. For Make >= 4.2, it can read
out a file by using the built-in function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since GNU Make 4.2, $(file ...) supports the read operater '<', which
is useful to read a file without forking a new process. No warning is
shown even if the input file is missing.
For older Make versions, it falls back to the cat command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
modules.order lists modules in the deterministic order (that is why
"modules order"), and there is no duplication in the list.
$(sort ) is pointless.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
GNU Make 4.4 introduced $(intcmp ...), which is useful to compare two
integers without forking a new process.
Add test-{ge,gt,le,lt} macros, which work more efficiently with GNU
Make >= 4.4. For older Make versions, they fall back to the 'test'
shell command.
The first two parameters to $(intcmp ...) must not be empty. To avoid
the syntax error, I appended '0' to them. Fortunately, '00' is treated
as '0'. This is needed because CONFIG options may expand to an empty
string when the kernel configuration is not included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Binutils 2.23 was released in 2012. Almost 10 years old.
We already require GCC 5.1, released in 2015.
Bump the binutils version to 2.25, which was released some months
before GCC 5.1.
With this applied, some subsystems can start to clean up code.
Examples:
arch/arm/Kconfig.assembler
arch/mips/vdso/Kconfig
arch/powerpc/Makefile
arch/x86/Kconfig.assembler
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Add a new sub-directory for things that aren't specifically about the
GPU and don't really belong in the i915 driver top level, but also don't
belong under any of the existing sub-directories either.
Name it "soc", and move the PCH and DRAM code there.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208142347.602726-1-jani.nikula@intel.com
The vfs{g,u}id_{gt,lt}_* helpers are currently not needed outside of
ima and we shouldn't incentivize people to use them by placing them into
the header. Let's just define them locally in the one file in ima where
they are used.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Exposed through sysctl, update documentation to describe sctp states and
their default timeouts.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is better to return the default switch case with
'-EINVAL', in case new commands are added. otherwise,
return a uninitialized value of ret.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH
wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl
RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq
ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8
MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1
W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s
FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/
UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN
TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr
O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V
eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI
IaV6cv6ILoqO
=GVzp
-----END PGP SIGNATURE-----
mergetag object 6132a490f9
type commit
tag irq-core-2022-12-10
tagger Thomas Gleixner <tglx@linutronix.de> 1670689576 +0100
Updates for the interrupt core and driver subsystem:
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tags 'acpi-6.2-rc1' and 'irq-core-2022-12-10' into loongarch-next
LoongArch architecture changes for 6.2 depend on the acpi and irqchip
changes to work, so merge them to create a base.
In exfat_get_dentry_set(), part of the code is the same as
exfat_find_location(), reuse exfat_find_location() to simplify
exfat_get_dentry_set().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
According to the exFAT specification, there are at most 2^32-11
clusters in a volume. so using 'int' is not enough for cluster
index, the return value type of exfat_sector_to_cluster() should
be 'unsigned int'.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
32 bit platforms without 64bit div generate the following warning:
net/netfilter/ipvs/ip_vs_est.c: In function 'ip_vs_est_calc_limits':
include/asm-generic/div64.h:222:35: warning: comparison of distinct pointer types lacks a cast
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
net/netfilter/ipvs/ip_vs_est.c:694:17: note: in expansion of macro 'do_div'
694 | do_div(val, loops);
| ^~~~~~
include/asm-generic/div64.h:222:35: warning: comparison of distinct pointer types lacks a cast
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
net/netfilter/ipvs/ip_vs_est.c:700:33: note: in expansion of macro 'do_div'
700 | do_div(val, min_est);
| ^~~~~~
first argument of do_div() should be unsigned. We can't just cast
as do_div() updates it as well, so we need an lval.
Make val unsigned in the first place, all paths check that the value
they assign to this variables are non-negative already.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221213032037.844517-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c ("mptcp: use proper req destructor for IPv6")
36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The init order and resulting error handling in dma_buf_export
was pretty messy.
Subordinate objects like the file and the sysfs kernel objects
were initializing and wiring itself up with the object in the
wrong order resulting not only in complicating and partially
incorrect error handling, but also in publishing only halve
initialized DMA-buf objects.
Clean this up thoughtfully by allocating the file independent
of the DMA-buf object. Then allocate and initialize the DMA-buf
object itself, before publishing it through sysfs. If everything
works as expected the file is then connected with the DMA-buf
object and publish it through debugfs.
Also adds the missing dma_resv_fini() into the error handling.
v2: add some missing changes to dma_bug_getfile() and a missing NULL
check in dma_buf_file_release()
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209071535.933698-1-christian.koenig@amd.com
RISC-V kernels support 3,4,5-level page tables at runtime by folding
upper levels.
In case of a 3-level page table, PGDIR is folded into P4D which in turn
is folded into PUD: PGDIR_SHIFT value is correctly set to the same value
as PUD_SHIFT, but P4D_SHIFT is not, then any use of P4D_SHIFT will access
invalid address bits (all set to 1).
Fix this by dynamically defining P4D_SHIFT value, like we already do for
PGDIR_SHIFT.
Fixes: d10efa21a9 ("riscv: mm: Control p4d's folding by pgtable_l5_enabled")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221201135128.1482189-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a static assert to ensure a RISCV_ISA_EXT_* enum is never
created with a value >= RISCV_ISA_EXT_MAX. We can do this by
putting RISCV_ISA_EXT_ID_MAX to more work. Before it was
redundant with RISCV_ISA_EXT_MAX and hence only used to
document the limit. Now it grows with the enum and is used to
check the limit.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221201113750.18021-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This release introduces support for the CB_RECALL_ANY operation.
NFSD can send this operation to request that clients return any
delegations they choose. The server uses this operation to handle
low memory scenarios or indicate to a client when that client has
reached the maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily
whilst support for sparse files in local filesystems and the VFS is
improved.
Two major data structure fixes appear in this release:
* The nfs4_file hash table is replaced with a resizable hash table
to reduce the latency of NFSv4 OPEN operations.
* Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2
to be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree.
-----BEGIN PGP SIGNATURE-----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=jNlu
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release introduces support for the CB_RECALL_ANY operation. NFSD
can send this operation to request that clients return any delegations
they choose. The server uses this operation to handle low memory
scenarios or indicate to a client when that client has reached the
maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
support for sparse files in local filesystems and the VFS is improved.
Two major data structure fixes appear in this release:
- The nfs4_file hash table is replaced with a resizable hash table to
reduce the latency of NFSv4 OPEN operations.
- Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2 to
be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree"
* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
NFSD: Avoid clashing function prototypes
SUNRPC: Fix crasher in unwrap_integ_data()
SUNRPC: Make the svc_authenticate tracepoint conditional
NFSD: Use only RQ_DROPME to signal the need to drop a reply
SUNRPC: Clean up xdr_write_pages()
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
NFSD: add CB_RECALL_ANY tracepoints
NFSD: add delegation reaper to react to low memory condition
NFSD: add support for sending CB_RECALL_ANY
NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
trace: Relocate event helper files
NFSD: pass range end to vfs_fsync_range() instead of count
lockd: fix file selection in nlmsvc_cancel_blocked
lockd: ensure we use the correct file descriptor when unlocking
lockd: set missing fl_flags field when retrieving args
NFSD: Use struct_size() helper in alloc_session()
nfsd: return error if nfs4_setacl fails
lockd: set other missing fields when unlocking files
NFSD: Add an nfsd_file_fsync tracepoint
sunrpc: svc: Remove an unused static function svc_ungetu32()
...
-----BEGIN PGP SIGNATURE-----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=Nqg9
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This round there are a lot of cleanups and moved code so the diffstat
looks huge, otherwise there are some nice performance improvements and
an update to raid56 reliability.
User visible features:
- raid56 reliability vs performance trade off:
- fix destructive RMW for raid5 data (raid6 still needs work): do
full checksum verification for all data during RMW cycle, this
should prevent rewriting potentially corrupted data without
notice
- stripes are cached in memory which should reduce the performance
impact but still can hurt some workloads
- checksums are verified after repair again
- this is the last option without introducing additional features
(write intent bitmap, journal, another tree), the extra checksum
read/verification was supposed to be avoided by the original
implementation exactly for performance reasons but that caused
all the reliability problems
- discard=async by default for devices that support it
- implement emergency flush reserve to avoid almost all unnecessary
transaction aborts due to ENOSPC in cases where there are too many
delayed refs or delayed allocation
- skip block group synchronization if there's no change in used
bytes, can reduce transaction commit count for some workloads
Performance improvements:
- fiemap and lseek:
- overall speedup due to skipping unnecessary or duplicate
searches (-40% run time)
- cache some data structures and sharedness of extents (-30% run
time)
- send:
- faster backref resolution when finding clones
- cached leaf to root mapping for faster backref walking
- improved clone/sharing detection
- overall run time improvements (-70%)
Core:
- module initialization converted to a table of function pointers run
in a sequence
- preparation for fscrypt, extend passing file names across calls,
dir item can store encryption status
- raid56 updates:
- more accurate error tracking of sectors within stripe
- simplify recovery path and remove dedicated endio worker kthread
- simplify scrub call paths
- refactoring to support the extra data checksum verification
during RMW cycle
- tree block parentness checks consolidated and done at metadata read
time
- improved error handling
- cleanups:
- move a lot of code for better synchronization between kernel and
user space sources, split big files
- enum cleanups
- GFP flag cleanups
- header file cleanups, prototypes, dependencies
- redundant parameter cleanups
- inline extent handling simplifications
- inode parameter conversion
- data structure cleanups, reductions, renames, merges"
* tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (249 commits)
btrfs: print transaction aborted messages with an error level
btrfs: sync some cleanups from progs into uapi/btrfs.h
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
btrfs: fix extent map use-after-free when handling missing device in read_one_chunk
btrfs: remove outdated logic from overwrite_item() and add assertion
btrfs: unify overwrite_item() and do_overwrite_item()
btrfs: replace strncpy() with strscpy()
btrfs: fix uninitialized variable in find_first_clear_extent_bit
btrfs: fix uninitialized parent in insert_state
btrfs: add might_sleep() annotations
btrfs: add stack helpers for a few btrfs items
btrfs: add nr_global_roots to the super block definition
btrfs: remove BTRFS_LEAF_DATA_OFFSET
btrfs: add helpers for manipulating leaf items and data
btrfs: add eb to btrfs_node_key_ptr_offset
btrfs: pass the extent buffer for the btrfs_item_nr helpers
btrfs: move the csum helpers into ctree.h
btrfs: move eb offset helpers into extent_io.h
btrfs: move file_extent_item helpers into file-item.h
btrfs: move leaf_data_end into ctree.c
...
These patches include the usual cleanups and minor fixes, the removal of
code that is no longer needed due to recent improvements, and
improvements to processing large volumes of messages during heavy
locking activity.
- Misc code cleanup.
- Fix a couple socket handling bugs: a double release on an error path
and a data-ready race in an accept loop.
- Remove code for resending dir-remove messages. This code is no longer
needed since the midcomms layer now ensures the messages are resent if
needed.
- Add tracepoints for dlm messages.
- Improve callback queueing by replacing the fixed array with a list.
- Simplify the handling of a remove message followed by a lookup
message by sending both without releasing a spinlock in between.
- Improve the concurrency of sending and receiving messages by holding
locks for a shorter time, and changing how workqueues are used.
- Remove old code for shutting down sockets, which is no longer needed
with the reliable connection handling that was recently added.
-----BEGIN PGP SIGNATURE-----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=TJvP
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"These patches include the usual cleanups and minor fixes, the removal
of code that is no longer needed due to recent improvements, and
improvements to processing large volumes of messages during heavy
locking activity.
Summary:
- Misc code cleanup
- Fix a couple of socket handling bugs: a double release on an error
path and a data-ready race in an accept loop
- Remove code for resending dir-remove messages. This code is no
longer needed since the midcomms layer now ensures the messages are
resent if needed
- Add tracepoints for dlm messages
- Improve callback queueing by replacing the fixed array with a list
- Simplify the handling of a remove message followed by a lookup
message by sending both without releasing a spinlock in between
- Improve the concurrency of sending and receiving messages by
holding locks for a shorter time, and changing how workqueues are
used
- Remove old code for shutting down sockets, which is no longer
needed with the reliable connection handling that was recently
added"
* tag 'dlm-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (37 commits)
fs: dlm: fix building without lockdep
fs: dlm: parallelize lowcomms socket handling
fs: dlm: don't init error value
fs: dlm: use saved sk_error_report()
fs: dlm: use sock2con without checking null
fs: dlm: remove dlm_node_addrs lookup list
fs: dlm: don't put dlm_local_addrs on heap
fs: dlm: cleanup listen sock handling
fs: dlm: remove socket shutdown handling
fs: dlm: use listen sock as dlm running indicator
fs: dlm: use list_first_entry_or_null
fs: dlm: remove twice INIT_WORK
fs: dlm: add midcomms init/start functions
fs: dlm: add dst nodeid for msg tracing
fs: dlm: rename seq to h_seq for msg tracing
fs: dlm: rename DLM_IFL_NEED_SCHED to DLM_IFL_CB_PENDING
fs: dlm: ast do WARN_ON_ONCE() on hotpath
fs: dlm: drop lkb ref in bug case
fs: dlm: avoid false-positive checker warning
fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()
...
-----BEGIN PGP SIGNATURE-----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=fd5k
-----END PGP SIGNATURE-----
Merge tag 'jfs-6.2' of https://github.com/kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp:
"Assorted JFS fixes for 6.2"
* tag 'jfs-6.2' of https://github.com/kleikamp/linux-shaggy:
jfs: makes diUnmount/diMount in jfs_mount_rw atomic
jfs: Fix a typo in function jfs_umount
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
jfs: Fix fortify moan in symlink
jfs: remove redundant assignments to ipaimap and ipaimap2
jfs: remove unused declarations for jfs
fs/jfs/jfs_xattr.h: Fix spelling typo in comment
MAINTAINERS: git://github -> https://github.com for kleikamp
fs/jfs: replace ternary operator with min_t()
fs: jfs: fix shift-out-of-bounds in dbAllocAG
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmOXWlMACgkQnJ2qBz9k
QNltfwf9GIEZASzX/v2LXYInbgvJnuRxeNoNFDZjatz+Nk17fJ9P0Fzcu7OztMTk
+4HX3pxXYn/eFTyxVf5c3C2gU4KDV2InrYk+IyA7unZ92ROO5uaxrrknSPouYXoO
fd0zwlMQ8bxk7wgjSnG+0Q38dbWr9XgYRqcURjXvRG9e68o49SXTc333lXc+l25X
WphjDK6d1gXWiHKdYVYiROF7HjAjaeRk8clXtFhHmyGvhi+wvfP6mqOhzMCRuR7U
M1dYR/B2+AJieOmVK1gqsLFc2f/TN3AEYMsRi256vYEuQhY7WRkxQw6afmYsLc8J
sjj4mR15SwZewLtIlNbX3phvi1OBWA==
=Q4qw
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf and ext2 fixes from Jan Kara:
- a couple of smaller cleanups and fixes for ext2
- fixes of a data corruption issues in udf when handling holes and
preallocation extents
- fixes and cleanups of several smaller issues in udf
- add maintainer entry for isofs
* tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix extending file within last block
udf: Discard preallocation before extending file with a hole
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
udf: Fix preallocation discarding at indirect extent boundary
udf: Increase UDF_MAX_READ_VERSION to 0x0260
fs/ext2: Fix code indentation
ext2: unbugger ext2_empty_dir()
udf: remove ->writepage
ext2: remove ->writepage
ext2: Don't flush page immediately for DIRSYNC directories
ext2: Fix some kernel-doc warnings
maintainers: Add ISOFS entry
udf: Avoid double brelse() in udf_rename()
fs: udf: Optimize udf_free_in_core_inode and udf_find_fileset function
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEkJ7fqygL5xE8uB3PUwOZruX0MckFAmOTX7AACgkQUwOZruX0
MclZNgf/XAoQbNRkB0H8oi3CS7RWl0iBlmPLKtNo39NuNgW6RCDY4F9rYt6F+dfq
P4EuYayZwYw9g/JotEVXtg6Sp7FINKHkMMvlvwa+VsN1fPVM1AbD4mos5imDsj0f
tkDVNXHsEOIc2tq0Ov9KUARCN59WpjV5dS0YQmCEsABIJQ1yu9FbCfm6WX3tH4Wd
l+z6SSU38ZjQw4fSsc4rEqxf3imynCz9fVJYdfUKsg5WH7TswBQbYEAExMPhd6df
qioM1t9u/nBFhOjw1VVgElx7PUijANczyiatU00jNRbMjCLlZcs5yjvv5XTgfRIe
u2UJZJB0+6eTqAjA8neC4Z6eKnezwQ==
=Cizh
-----END PGP SIGNATURE-----
Merge tag 'fs.xattr.simple.noaudit.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull xattr audit fix from Seth Forshee:
"This is a single patch to remove auditing of the capability check in
simple_xattr_list().
This check is done to check whether trusted xattrs should be included
by listxattr(2). SELinux will normally log a denial when capable() is
called and the task's SELinux context doesn't have the corresponding
capability permission allowed, which can end up spamming the log.
Since a failed check here cannot be used to infer malicious intent,
auditing is of no real value, and it makes sense to stop auditing the
capability check"
* tag 'fs.xattr.simple.noaudit.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: don't audit the capability check in simple_xattr_list()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEkJ7fqygL5xE8uB3PUwOZruX0MckFAmOTX4IACgkQUwOZruX0
McmDJgf8DlnoL7R88j0OZCLEpuxCOw+j1ZmQhUYz7XmDYPi8zDQCZtcx7scqQIlR
oYb6fxP3NOLdsPzt/K2QNuzM8Yv2kRGskZPzojcBzkMwGBlFgyjLjGCOG93hmTcD
+nXtod7QzgUvpv7w9bnLXZMw8WvU78UUsUzwhN5jgSmnpmhozZKV8xfIzJYlRUJ+
dNYRZ9O374W+NZOX97nki7oR19cdL5uzpU53ZXMm9DMlLVgcB7yqqS37ABmqS37K
I9wJsfcPOsd60f5FUWIm0uxGvAC+p5Z+rG4MJytbDFBfvLlhnJOHRwE+sn5b53wI
LuAr9AHF1AHuwuNswatjumJdW9qr4Q==
=/IDh
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull squashfs update from Seth Forshee:
"This is a simple patch to enable idmapped mounts for squashfs.
All functionality squashfs needs to support idmapped mounts is already
implemented in generic VFS code, so all that is needed is to set
FS_ALLOW_IDMAP in fs_flags"
* tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
squashfs: enable idmapped mounts
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY5cH0wAKCRDh3BK/laaZ
PAIJAQC658ZaXRgWBZ/XmCqbb+c8g/InrccE+PXhtVGYTiWTiwD/ZEy7r/X/uJaO
gb5anxJT5jVJ9Qfk1VbyZqdwqUqydAo=
=If6t
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
- Allow some write requests to proceed in parallel
- Fix a performance problem with allow_sys_admin_access
- Add a special kind of invalidation that doesn't immediately purge
submounts
- On revalidation treat the target of rename(RENAME_NOREPLACE) the same
as open(O_EXCL)
- Use type safe helpers for some mnt_userns transformations
* tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Rearrange fuse_allow_current_process checks
fuse: allow non-extending parallel direct writes on the same file
fuse: remove the unneeded result variable
fuse: port to vfs{g,u}id_t and associated helpers
fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
fuse: always revalidate rename target dentry
fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
fs/fuse: Replace kmap() with kmap_local_page()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCY5b3+gAKCRDh3BK/laaZ
PIPxAQCPgyV/X/yJFd3wVgKa3/JxcHl5qdPbwHXFuYiJCBd69QEA9LYQEeEoTLCY
veGiQPkl6Sp8ZqmTbDBxqw5OaBTSMwM=
=7TiE
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a couple of bugs found by syzbot
- Don't ingore some open flags set by fcntl(F_SETFL)
- Fix failure to create a hard link in certain cases
- Use type safe helpers for some mnt_userns transformations
- Improve performance of mount
- Misc cleanups
* tag 'ovl-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: Kconfig: Fix spelling mistake "undelying" -> "underlying"
ovl: use inode instead of dentry where possible
ovl: Add comment on upperredirect reassignment
ovl: use plain list filler in indexdir and workdir cleanup
ovl: do not reconnect upper index records in ovl_indexdir_cleanup()
ovl: fix comment typos
ovl: port to vfs{g,u}id_t and associated helpers
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ovl: Use "buf" flexible array for memcpy() destination
ovl: update ->f_iocb_flags when ovl_change_flags() modifies ->f_flags
ovl: fix use inode directly in rcu-walk mode
- Enable large folios for iomap/fscache mode;
- Avoid sysfs warning due to mounting twice with the same fsid and
domain_id in fscache mode;
- Refine fscache interface among erofs, fscache, and cachefiles;
- Use kmap_local_page() only for metabuf;
- Fixes around crafted images found by syzbot;
- Minor cleanups and documentation updates.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCY5S3khEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBLr3AQDA5xpztSsxfe0Gp+bwf12ySuntimJxXmAj
83EHCfSC+AEAu4fcWkIF38MBBVJvFVjFaXCZKmFossbI5Rp8TuqPpgk=
=HDsJ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, large folios are now enabled in the iomap/fscache mode
for uncompressed files first. In order to do that, we've also cleaned
up better interfaces between erofs and fscache, which are acked by
fscache/netfs folks and included in this pull request.
Other than that, there are random fixes around erofs over fscache and
crafted images by syzbot, minor cleanups and documentation updates.
Summary:
- Enable large folios for iomap/fscache mode
- Avoid sysfs warning due to mounting twice with the same fsid and
domain_id in fscache mode
- Refine fscache interface among erofs, fscache, and cachefiles
- Use kmap_local_page() only for metabuf
- Fixes around crafted images found by syzbot
- Minor cleanups and documentation updates"
* tag 'erofs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: validate the extent length for uncompressed pclusters
erofs: fix missing unmap if z_erofs_get_extent_compressedlen() fails
erofs: Fix pcluster memleak when its block address is zero
erofs: use kmap_local_page() only for erofs_bread()
erofs: enable large folios for fscache mode
erofs: support large folios for fscache mode
erofs: switch to prepare_ondemand_read() in fscache mode
fscache,cachefiles: add prepare_ondemand_read() callback
erofs: clean up cached I/O strategies
erofs: update documentation
erofs: check the uniqueness of fsid in shared domain in advance
erofs: enable large folios for iomap mode
The main change this cycle is to stop using the PG_error flag to track
verity failures, and instead just track failures at the bio level. This
follows a similar fscrypt change that went into 6.1, and it is a step
towards freeing up PG_error for other uses.
There's also one other small cleanup.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY5anyRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1IPAP0SMSKJRgehpXHKp5QZxHSpAjkFlcGa
2y8Lc+DlHOrfLQEAmpGAxewowkMzpYVXmlAVVHRgUPWLjoMQQELEUQ8mWgU=
=M+pB
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"The main change this cycle is to stop using the PG_error flag to track
verity failures, and instead just track failures at the bio level.
This follows a similar fscrypt change that went into 6.1, and it is a
step towards freeing up PG_error for other uses.
There's also one other small cleanup"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fsverity: simplify fsverity_get_digest()
fsverity: stop using PG_error to track error status
This release adds SM4 encryption support, contributed by Tianjia Zhang.
SM4 is a Chinese block cipher that is an alternative to AES.
I recommend against using SM4, but (according to Tianjia) some people
are being required to use it. Since SM4 has been turning up in many
other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.), it
hasn't been very controversial, and some people have to use it, I don't
think it would be fair for me to reject this optional feature.
Besides the above, there are a couple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY5auyBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1u4AP4lhLxaEJ9upkHZrPAvEdF7QjLhO/ju
h1LrvWHcEbvr6AEA/8ptc5RA1BAoSTDcqIWxIAWRztvptP4gUETb1b9C/ws=
=An5w
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release adds SM4 encryption support, contributed by Tianjia
Zhang. SM4 is a Chinese block cipher that is an alternative to AES.
I recommend against using SM4, but (according to Tianjia) some people
are being required to use it. Since SM4 has been turning up in many
other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.),
it hasn't been very controversial, and some people have to use it, I
don't think it would be fair for me to reject this optional feature.
Besides the above, there are a couple cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add additional documentation for SM4 support
fscrypt: remove unused Speck definitions
fscrypt: Add SM4 XTS/CTS symmetric algorithm support
blk-crypto: Add support for SM4-XTS blk crypto mode
fscrypt: add comment for fscrypt_valid_enc_modes_v1()
fscrypt: pass super_block to fscrypt_put_master_key_activeref()
KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.
Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.
Follows:
- error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
- there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
- other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.
Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
found by Syzbot and fuzzing. (Many of the bug fixes involve less-used
ext4 features such as fast_commit, inline_data and bigalloc.)
In addition, remove the writepage function for ext4, since the
medium-term plan is to remove ->writepage() entirely. (The VM doesn't
need or want writepage() for writeback, since it is fine with
->writepages() so long as ->migrate_folio() is implemented.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmOWqrMACgkQ8vlZVpUN
gaMvmgf+P2C6vzjn13ZdF+GwFTi4fx4TJ5BZT78LQqvTZqhkfk4k1q2SFfHI7nXT
ZWdu1KUQ0SYLo64oaSU9W+2B2pmGi/KgUlrwNhy8DFeGStogPuDVfmGWB63p1UQL
ld42mE9q7bjY6nCZSKYXPp2jfSwsHuliHBJ4UfzVNAIwjiUEJ7pGeIrMFdLAEkVm
TVNzvlUZaHUnVxhpsP6hs+5WNhHQ2IhWz4rwX01ussNgHTijYac4iaL05wpTvF5e
6NtvfmpOEMAbYrmIkJX4RVss4JNsHNOC0E8fjEHlgXJxBiAI6w8GxTxrS52Y4ELH
nHXl/pc0L+I8+yh9B9+s0LBaSuPuTg==
=lezv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of cleanups and bug fixes, with many of the bug fixes
found by Syzbot and fuzzing. (Many of the bug fixes involve less-used
ext4 features such as fast_commit, inline_data and bigalloc)
In addition, remove the writepage function for ext4, since the
medium-term plan is to remove ->writepage() entirely. (The VM doesn't
need or want writepage() for writeback, since it is fine with
->writepages() so long as ->migrate_folio() is implemented)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: fix reserved cluster accounting in __es_remove_extent()
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
ext4: allocate extended attribute value in vmalloc area
ext4: avoid unaccounted block allocation when expanding inode
ext4: initialize quota before expanding inode in setproject ioctl
ext4: stop providing .writepage hook
mm: export buffer_migrate_folio_norefs()
ext4: switch to using write_cache_pages() for data=journal writeout
jbd2: switch jbd2_submit_inode_data() to use fs-provided hook for data writeout
ext4: switch to using ext4_do_writepages() for ordered data writeout
ext4: move percpu_rwsem protection into ext4_writepages()
ext4: provide ext4_do_writepages()
ext4: add support for writepages calls that cannot map blocks
ext4: drop pointless IO submission from ext4_bio_write_page()
ext4: remove nr_submitted from ext4_bio_write_page()
ext4: move keep_towrite handling to ext4_bio_write_page()
ext4: handle redirtying in ext4_bio_write_page()
ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
ext4: make ext4_mb_initialize_context return void
ext4: fix deadlock due to mbcache entry corruption
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5by6AAKCRCRxhvAZXjc
onblAPsFzodV8/9UoCIkKxwn0aiclbiAITTWI9ZLulmKhm0I6wD/RUOLKjt12uZJ
m81UTfkWHopWKtQ+X3saZEcyYTNLugE=
=AtGb
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull idmapping updates from Christian Brauner:
"Last cycle we've already made the interaction with idmapped mounts
more robust and type safe by introducing the vfs{g,u}id_t type. This
cycle we concluded the conversion and removed the legacy helpers.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem - with
namespaces that are relevent on the mount level. Especially for
filesystem developers without detailed knowledge in this area this can
be a potential source for bugs.
Instead of passing the plain namespace we introduce a dedicated type
struct mnt_idmap and replace the pointer with a pointer to a struct
mnt_idmap. There are no semantic or size changes for the mount struct
caused by this.
We then start converting all places aware of idmapped mounts to rely
on struct mnt_idmap. Once the conversion is done all helpers down to
the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take
a struct mnt_idmap argument instead of two namespace arguments. This
way it becomes impossible to conflate the two removing and thus
eliminating the possibility of any bugs. Fwiw, I fixed some issues in
that area a while ago in ntfs3 and ksmbd in the past. Afterwards only
low-level code can ultimately use the associated namespace for any
permission checks. Even most of the vfs can be completely obivious
about this ultimately and filesystems will never interact with it in
any form in the future.
A struct mnt_idmap currently encompasses a simple refcount and pointer
to the relevant namespace the mount is idmapped to. If a mount isn't
idmapped then it will point to a static nop_mnt_idmap and if it
doesn't that it is idmapped. As usual there are no allocations or
anything happening for non-idmapped mounts. Everthing is carefully
written to be a nop for non-idmapped mounts as has always been the
case.
If an idmapped mount is created a struct mnt_idmap is allocated and a
reference taken on the relevant namespace. Each mount that gets
idmapped or inherits the idmap simply bumps the reference count on
struct mnt_idmap. Just a reminder that we only allow a mount to change
it's idmapping a single time and only if it hasn't already been
attached to the filesystems and has no active writers.
The actual changes are fairly straightforward but this will have huge
benefits for maintenance and security in the long run even if it
causes some churn.
Note that this also makes it possible to extend struct mount_idmap in
the future. For example, it would be possible to place the namespace
pointer in an anonymous union together with an idmapping struct. This
would allow us to expose an api to userspace that would let it specify
idmappings directly instead of having to go through the detour of
setting up namespaces at all"
* tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
acl: conver higher-level helpers to rely on mnt_idmap
fs: introduce dedicated idmap type for mounts
We could use the dsb to load the LUT in any gamma mode, not just
when using the multi-segment mode. So replace the direct mmio
on all ilk+ paths with the wrapper.
There are a few functions (ilk_load_lut_10(), ivb_load_lut_10())
that would never be used on a platform with dsb so we could
skip those, but probably better to keep all this 100% consistent
to avoid people getting confused and copy pasting the wrong thing
when adding a new gamma mode.
The gmch stuff I left with direct mmio since those are fairly
distinct and shouldn't cause too much confusion. Although
I've also pondered about converting everything over to dsb
command buffers and just executing it on the CPU when the
real hw is not available. But dunno if that would actually
be a good idea or not...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-13-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
This reverts commit 99510e1afb.
DSB is now getting disabled locally in the color management
code so we don't need to apply this big hammer via the device
info (not that we have other DSB users at the moment).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-12-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The DSB has problem loading the LUTs at the moment. Some
of that is due to the palette anti collision logic, some
due to what seem real hw issues. Disable it the whole
thing locally in the color management code for now.
Note that we currently have this weird situation where on
adl+ we load parts of the LUT with DSB and parts with mmio.
That is due to the fact that only some parts of the LUT code
are using the DSB register write functions (ivb_load_lut_ext*()),
while the rest is using pure mmio (bdw_load_lut_10()). So now
we'll go back to pure mmio temporarily, until the DSB issues
get fixed (at which point we should be going for pure DSB).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We could have many different uses for the DSB(s) during a
single commit, so the current approach of passing the whole
crtc_state to the DSB functions is far too high level. Lower
the abstraction a little bit so each DSB user can decide where
to stick the command buffer/etc.
v2: Document the intel_dsb_prepare() return value (Ankit)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-10-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bspgAKCRCRxhvAZXjc
opEWAQDpF5rnZn1vv4/uOTij9ztcA4yLxu/Q19CdqBaoHlWZ9AD/d3eecee3bh5h
iPHtlUK5/VspfD9LPpdc5ZbPCdZ2pA4=
=t6NN
-----END PGP SIGNATURE-----
Merge tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid updates from Christian Brauner:
"Last cycle we introduced the vfs{g,u}id_t types and associated helpers
to gain type safety when dealing with idmapped mounts. That initial
work already converted a lot of places over but there were still some
left,
This converts all remaining places that still make use of non-type
safe idmapping helpers to rely on the new type safe vfs{g,u}id based
helpers.
Afterwards it removes all the old non-type safe helpers"
* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: remove unused idmapping helpers
ovl: port to vfs{g,u}id_t and associated helpers
fuse: port to vfs{g,u}id_t and associated helpers
ima: use type safe idmapping helpers
apparmor: use type safe idmapping helpers
caps: use type safe idmapping helpers
fs: use type safe idmapping helpers
mnt_idmapping: add missing helpers
Since the color management code is the only user of the DSB
at the moment move the DSB prepare/cleanup there too. The
code has to anyway make decisions on whether to use the DSB
or not (and how to use it). Also we'll need a place where we
actually generate the DSB command buffer ahead of time rather
than the current situation where it gets generated too late
during the mmio programming of the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The use of DSB has to be done differently on a case by case basis.
So no way this kind of blind mmio fallback in the guts of the DSB
code will work properly. Move it at least one level up into the
LUT loading code. Not sure if this is the way we want do the
DSB vs. mmio handling in the end, but at least it's a bit
closer than what we had before.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Various gamma units on various platforms have some problems loading
the LUT index and auto-increment bit at the same time. We have to
do this in two steps. The first known case was the glk degamma LUT,
but at least ADL has another known case.
We're not going to suffer too badly from a couple of extra register
writes here, so let's just standardize on this practice for all
auto-increment LUT loads/reads. This way we never have to worry about
this specific issue again. And for good measure always reset the
index back to zero at the end (we already did this in a few places).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-6-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>