Add a back pointer from scx_sched_pcpu to scx_sched. This will be used by
the next patch to make scx_bpf_reenqueue_local() sub-sched aware.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The preceding changes implemented the framework to support cgroup
sub-scheds and updated scheduling paths and kfuncs so that they have
minimal but working support for sub-scheds. However, actual sub-sched
enabling/disabling hasn't been implemented yet and all tasks stayed on
scx_root.
Implement cgroup sub-sched enabling and disabling to actually activate
sub-scheds:
- Both enable and disable operations bypass only the tasks in the subtree
of the child being enabled or disabled to limit disruptions.
- When enabling, all candidate tasks are first initialized for the child
sched. Once that succeeds, the tasks are exited for the parent and then
switched over to the child. This adds a bit of complication but
guarantees that child scheduler failures are always contained.
- Disabling works the same way in the other direction. However, when the
parent may fail to initialize a task, disabling is propagated up to the
parent. While this means that a parent sched fail due to a child sched
event, the failure can only originate from the parent itself (its
ops.init_task()). The only effect a malfunctioning child can have on the
parent is attempting to move the tasks back to the parent.
After this change, although not all the necessary mechanisms are in place
yet, sub-scheds can take control of their tasks and schedule them.
v2: Fix missing scx_cgroup_unlock()/percpu_up_write() in abort path
(Cheng-Yang Chou).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Extend scx_dump_state() to support multiple schedulers and improve task
identification in dumps. The function now takes a specific scheduler to
dump and can optionally filter tasks by scheduler.
scx_dump_task() now displays which scheduler each task belongs to, using
"*" to mark tasks owned by the scheduler being dumped. Sub-schedulers
are identified with their level and cgroup ID.
The SysRq-D handler now iterates through all active schedulers under
scx_sched_lock and dumps each one separately. For SysRq-D dumps, only
tasks owned by each scheduler are dumped to avoid redundancy since all
schedulers are being dumped. Error-triggered dumps continue to dump all
tasks since only that specific scheduler is being dumped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The scx_dump_state() function uses a regular spinlock to serialize
access. In a subsequent patch, this function will be called while
holding scx_sched_lock, which is a raw spinlock, creating a lock
nesting violation.
Convert the dump_lock to a raw spinlock and use the guard macro for
cleaner lock management.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Currently, the watchdog checks all tasks as if they are all on scx_root.
Move scx_watchdog_timeout inside scx_sched and make check_rq_for_timeouts()
use the timeout from the scx_sched associated with each task.
refresh_watchdog() is added, which determines the timer interval as half of
the shortest watchdog timeouts of all scheds and arms or disarms it as
necessary. Every scx_sched instance has equivalent or better detection
latency while sharing the same timer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_dsp_ctx and scx_dsp_max_batch are global variables used in the dispatch
path. In prepration for multiple scheduler support, move the former into
scx_sched_pcpu and the latter into scx_sched. No user-visible behavior
changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The cgroup sub-sched support involves invasive changes to many areas of
sched_ext. The overall scaffolding is now in place and the next step is
implementing sub-sched enable/disable.
To enable partial testing and verification, update balance_one() to
dispatch from all scx_sched instances until it finds a task to run. This
should keep scheduling working when sub-scheds are enabled with tasks on
them. This will be replaced by BPF-driven hierarchical operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
When a sub-scheduler enters bypass mode, its tasks must be scheduled by an
ancestor to guarantee forward progress. Tasks from bypassing descendants are
queued in the bypass DSQs of the nearest non-bypassing ancestor, or the root
scheduler if all ancestors are bypassing. This requires coordination between
bypassing schedulers and their hosts.
Add bypass_enq_target_dsq() to find the correct bypass DSQ by walking up the
hierarchy until reaching a non-bypassing ancestor. When a sub-scheduler starts
bypassing, all its runnable tasks are re-enqueued after scx_bypassing() is set,
ensuring proper migration to ancestor bypass DSQs.
Update scx_dispatch_sched() to handle hosting bypassed descendants. When a
scheduler is not bypassing but has bypassing descendants, it must schedule both
its own tasks and bypassed descendant tasks. A simple policy is implemented
where every Nth dispatch attempt (SCX_BYPASS_HOST_NTH=2) consumes from the
bypass DSQ. A fallback consumption is also added at the end of dispatch to
ensure bypassed tasks make progress even when normal scheduling is idle.
Update enable_bypass_dsp() and disable_bypass_dsp() to increment
bypass_dsp_enable_depth on both the bypassing scheduler and its parent host,
ensuring both can detect that bypass dispatch is active through
bypass_dsp_enabled().
Add SCX_EV_SUB_BYPASS_DISPATCH event counter to track scheduling of bypassed
descendant tasks.
v2: Fix comment typos (Andrea).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The bypass_depth field tracks nesting of bypass operations but is also used
to determine whether the bypass dispatch path should be active. With
hierarchical scheduling, child schedulers may need to activate their parent's
bypass dispatch path without affecting the parent's bypass_depth, requiring
separation of these concerns.
Add bypass_dsp_enable_depth and bypass_dsp_claim to independently control
bypass dispatch path activation. The new enable_bypass_dsp() and
disable_bypass_dsp() functions manage this state with proper claim semantics
to prevent races. The bypass dispatch path now only activates when
bypass_dsp_enabled() returns true, which checks the new enable_depth counter.
The disable operation is carefully ordered after all tasks are moved out of
bypass DSQs to ensure they are drained before the dispatch path is disabled.
During scheduler teardown, disable_bypass_dsp() is called explicitly to ensure
cleanup even if bypass mode was never entered normally.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The @prev parameter passed into ops.dispatch() is expected to be on the
same sched. Passing in @prev which isn't on the sched can spuriously
trigger failures that can kill the scheduler. Pass in @prev iff it's on
the same sched.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
In preparation of multiple scheduler support, factor out
scx_dispatch_sched() from balance_one(). The function boundary makes
remembering $prev_on_scx and $prev_on_rq less useful. Open code $prev_on_scx
in balance_one() and $prev_on_rq in both balance_one() and
scx_dispatch_sched().
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Bypass mode is used to simplify enable and disable paths and guarantee
forward progress when something goes wrong. When enabled, all tasks skip BPF
scheduling and fall back to simple in-kernel FIFO scheduling. While this
global behavior can be used as-is when dealing with sub-scheds, that would
allow any sub-sched instance to affect the whole system in a significantly
disruptive manner.
Make bypass state hierarchical by propagating it to descendants and updating
per-cpu flags accordingly. This allows an scx_sched to bypass if itself or
any of its ancestors are in bypass mode. However, this doesn't make the
actual bypass enqueue and dispatch paths hierarchical yet. That will be done
in later patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
In preparation of multiple scheduler support, make bypass state
per-scx_sched. Move scx_bypass_depth, bypass_timestamp and bypass_lb_timer
from globals into scx_sched. Move SCX_RQ_BYPASSING from rq to scx_sched_pcpu
as SCX_SCHED_PCPU_BYPASSING.
scx_bypass() now takes @sch and scx_rq_bypassing(rq) is replaced with
scx_bypassing(sch, cpu). All callers updated.
scx_bypassed_for_enable existed to balance the global scx_bypass_depth when
enable failed. Now that bypass_depth is per-scheduler, the counter is
destroyed along with the scheduler on enable failure. Remove
scx_bypassed_for_enable.
As all tasks currently use the root scheduler, there's no observable behavior
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
To support bypass mode for sub-schedulers, move bypass_dsq from struct scx_rq
to struct scx_sched_pcpu. Add bypass_dsq() helper. Move bypass_dsq
initialization from init_sched_ext_class() to scx_alloc_and_attach_sched().
bypass_lb_cpu() now takes a CPU number instead of rq pointer. All callers
updated. No behavior change as all tasks use the root scheduler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The abort state was tracked in the global scx_aborting flag which was used to
break out of potential live-lock scenarios when an error occurs. With
hierarchical scheduling, each scheduler instance must track its own abort
state independently so that an aborting scheduler doesn't interfere with
others.
Move the aborting flag into struct scx_sched and update all access sites. The
early initialization check in scx_root_enable() that warned about residual
aborting state is no longer needed as each scheduler instance now starts with
a clean state.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The default time slice was stored in the global scx_slice_dfl variable which
was dynamically modified when entering and exiting bypass mode. With
hierarchical scheduling, each scheduler instance needs its own default slice
configuration so that bypass operations on one scheduler don't affect others.
Move slice_dfl into struct scx_sched and update all access sites. The bypass
logic now modifies the root scheduler's slice_dfl. At task initialization in
init_scx_entity(), use the SCX_SLICE_DFL constant directly since the task may
not yet be associated with a specific scheduler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Call ops.core_sched_before() iff both tasks belong to the same scx_sched.
Otherwise, use timestamp based ordering.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
- Add the @sch parameter to scx_init_task() and drop @tg as it can be
obtained from @p. Separate out __scx_init_task() which does everything
except for the task state transition.
- Add the @sch parameter to scx_enable_task(). Separate out
__scx_enable_task() which does everything except for the task state
transition.
- Add the @sch parameter to scx_disable_task().
- Rename scx_exit_task() to scx_disable_and_exit_task() and separate out
__scx_disable_and_exit_task() which does everything except for the task
state transition.
While some task state transitions are relocated, no meaningful behavior
changes are expected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_bpf_dsq_move[_vtime]() calls scx_dsq_move() to move task from a DSQ to
another. However, @p doesn't necessarily have to come form the containing
iteration and can thus be a task which belongs to another scx_sched. Verify
that @p is on the same scx_sched as the DSQ being iterated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() now verify that
the calling scheduler has authority over the task before allowing updates.
This prevents schedulers from modifying tasks that don't belong to them in
hierarchical scheduling configurations.
Direct writes to p->scx.slice and p->scx.dsq_vtime are deprecated and now
trigger warnings. They will be disallowed in a future release.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add checks to enforce scheduling authority boundaries when multiple
schedulers are present:
1. In scx_dsq_insert_preamble() and the dispatch retry path, ignore attempts
to insert tasks that the scheduler doesn't own, counting them via
SCX_EV_INSERT_NOT_OWNED. As BPF schedulers are allowed to ignore
dequeues, such attempts can occur legitimately during sub-scheduler
enabling when tasks move between schedulers. The counter helps distinguish
normal cases from scheduler bugs.
2. For scx_bpf_dsq_insert_vtime() and scx_bpf_select_cpu_and(), error out
when sub-schedulers are attached. These functions lack the aux__prog
parameter needed to identify the calling scheduler, so they cannot be used
safely with multiple schedulers. BPF programs should use the arg-wrapped
versions (__scx_bpf_dsq_insert_vtime() and __scx_bpf_select_cpu_and())
instead.
These checks ensure that with multiple concurrent schedulers, scheduler
identity can be properly determined and unauthorized task operations are
prevented or tracked.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
In preparation for multiple scheduler support, introduce scx_prog_sched()
accessor which returns the scx_sched instance associated with a BPF program.
The association is determined via the special KF_IMPLICIT_ARGS kfunc
parameter, which provides access to bpf_prog_aux. This aux can be used to
retrieve the struct_ops (sched_ext_ops) that the program is associated with,
and from there, the corresponding scx_sched instance.
For compatibility, when ops.sub_attach is not implemented (older schedulers
without sub-scheduler support), unassociated programs fall back to scx_root.
A warning is logged once per scheduler for such programs.
As scx_root is still the only scheduler, this shouldn't introduce
user-visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
In preparation of multiple scheduler support, add p->scx.sched which points
to the scx_sched instance that the task is scheduled by, which is currently
always scx_root. Add scx_task_sched[_rcu]() accessors which return the
associated scx_sched of the specified task and replace the raw scx_root
dereferences with it where applicable. scx_task_on_sched() is also added to
test whether a given task is on the specified sched.
As scx_root is still the only scheduler, this shouldn't introduce
user-visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A system often runs multiple workloads especially in multi-tenant server
environments where a system is split into partitions servicing separate
more-or-less independent workloads each requiring an application-specific
scheduler. To support such and other use cases, sched_ext is in the process
of growing multiple scheduler support.
When partitioning a system in terms of CPUs for such use cases, an
oft-taken approach is hard partitioning the system using cpuset. While it
would be possible to tie sched_ext multiple scheduler support to cpuset
partitions, such an approach would have fundamental limitations stemming
from the lack of dynamism and flexibility.
Users often don't care which specific CPUs are assigned to which workload
and want to take advantage of optimizations which are enabled by running
workloads on a larger machine - e.g. opportunistic over-commit, improving
latency critical workload characteristics while maintaining bandwidth
fairness, employing control mechanisms based on different criteria than
on-CPU time for e.g. flexible memory bandwidth isolation, packing similar
parts from different workloads on same L3s to improve cache efficiency,
and so on.
As this sort of dynamic behaviors are impossible or difficult to implement
with hard partitioning, sched_ext is implementing cgroup sub-sched support
where schedulers can be attached to the cgroup hierarchy and a parent
scheduler is responsible for controlling the CPUs that each child can use
at any given moment. This makes CPU distribution dynamically controlled by
BPF allowing high flexibility.
This patch adds the skeletal sched_ext cgroup sub-sched support:
- sched_ext_ops.sub_cgroup_id and .sub_attach/detach() are added. Non-zero
sub_cgroup_id indicates that the scheduler is to be attached to the
identified cgroup. A sub-sched is attached to the cgroup iff the nearest
ancestor scheduler implements .sub_attach() and grants the attachment. Max
nesting depth is limited by SCX_SUB_MAX_DEPTH.
- When a scheduler exits, all its descendant schedulers are exited
together. Also, cgroup.scx_sched added which points to the effective
scheduler instance for the cgroup. This is updated on scheduler
init/exit and inherited on cgroup online. When a cgroup is offlined, the
attached scheduler is automatically exited.
- Sub-sched support is gated on CONFIG_EXT_SUB_SCHED which is
automatically enabled if both SCX and cgroups are enabled. Sub-sched
support is not tied to the CPU controller but rather the cgroup
hierarchy itself. This is intentional as the support for cpu.weight and
cpu.max based resource control is orthogonal to sub-sched support. Note
that CONFIG_CGROUPS around cgroup subtree iteration support for
scx_task_iter is replaced with CONFIG_EXT_SUB_SCHED for consistency.
- This allows loading sub-scheds and most framework operations such as
propagating disable down the hierarchy work. However, sub-scheds are not
operational yet and all tasks stay with the root sched. This will serve
as the basis for building up full sub-sched support.
- DSQs point to the scx_sched they belong to.
- scx_qmap is updated to allow attachment of sub-scheds and also serving
as sub-scheds.
- scx_is_descendant() is added but not yet used in this patch. It is used by
later changes in the series and placed here as this is where the function
belongs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
In preparation for multiple scheduler support, reorganize the enable and
disable paths to make scheduler instances explicit. Extract
scx_root_disable() from scx_disable_workfn(). Rename scx_enable_workfn()
to scx_root_enable_workfn(). Change scx_disable() to take @sch parameter
and only queue disable_work if scx_claim_exit() succeeds for consistency.
Move exit_kind validation into scx_claim_exit(). The sysrq handler now
prints a message when no scheduler is loaded.
These changes don't materially affect user-visible behavior.
v2: Keep scx_enable() name as-is and only rename the workfn to
scx_root_enable_workfn(). Change scx_enable() return type to s32.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
- Always trigger the warning if p->scx.disallow is set for fork inits. There
is no reason to set it during forks.
- Flip the positions of if/else arms to ease adding error conditions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The planned sched_ext cgroup sub-scheduler support needs the newly forked
task to be associated with its cgroup in its post_fork() hook. There is no
existing ordering requirement between the two now. Swap them and note the
new ordering requirement.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Make sched_cgroup_fork() pass @kargs to scx_fork(). This will be used to
determine @p's cgroup for cgroup sub-sched support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
For the planned cgroup sub-scheduler support, enable/disable operations are
going to be subtree specific and iterating all tasks in the system for those
operations can be unnecessarily expensive and disruptive.
cgroup already has mechanisms to perform subtree task iterations. Implement
cgroup subtree iteration for scx_task_iter:
- Add optional @cgrp to scx_task_iter_start() which enables cgroup subtree
iteration.
- Make scx_task_iter use css_next_descendant_pre() and css_task_iter to
iterate all tasks in the cgroup subtree.
- Update all existing callers to pass NULL to maintain current behavior.
The two iteration mechanisms are independent and duplicate. It's likely that
scx_tasks can be removed in favor of always using cgroup iteration if
CONFIG_SCHED_CLASS_EXT depends on CONFIG_CGROUPS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Commit 0927780c90 ("sched_ext: Use READ_ONCE() for lock-free reads
of module param variables") annotated the plain reads of
scx_slice_bypass_us and scx_bypass_lb_intv_us in bypass_lb_cpu(), but
missed a third site in scx_bypass():
WRITE_ONCE(scx_slice_dfl, scx_slice_bypass_us * NSEC_PER_USEC);
scx_slice_bypass_us is a module parameter writable via sysfs in
process context through set_slice_us() -> param_set_uint_minmax(),
which performs a plain store without holding bypass_lock. scx_bypass()
reads the variable under bypass_lock, but since the writer does not
take that lock, the two accesses are concurrent.
WRITE_ONCE() only applies volatile semantics to the store of
scx_slice_dfl -- the val expression containing scx_slice_bypass_us is
evaluated as a plain read, providing no protection against concurrent
writes.
Wrap the read with READ_ONCE() to complete the annotation started by
commit 0927780c90 and make the access KCSAN-clean, consistent with
the existing READ_ONCE(scx_slice_bypass_us) in bypass_lb_cpu().
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Mention the scheduling class precedence of fair and sched_ext to
clear up how sched_ext partial mode works.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Expose the following through cgroup.h:
- cgroup_on_dfl()
- cgroup_is_dead()
- cgroup_for_each_live_child()
- cgroup_for_each_live_descendant_pre()
- cgroup_for_each_live_descendant_post()
Until now, these didn't need to be exposed because controllers only cared
about the css hierarchy. The planned sched_ext hierarchical scheduler
support will be based on the default cgroup hierarchy, which is in line
with the existing BPF cgroup support, and thus needs these exposed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Prevent CONFIG_FS_VERITY from being enabled when the page size is 256K,
since it doesn't work in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaaj+ThQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9PdAP0bl5KEYBjtUmgg4Olv+GOLegWCZRsq
WvGJgIUDDZQfyAEAta6nN5CZ4LbngtWtPsNWVihyoaME2b7yrF/kz7l07g8=
=/rYw
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Prevent CONFIG_FS_VERITY from being enabled when the page size is
256K, since it doesn't work in that case"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: add dependency on 64K or smaller pages
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs.
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code.
- Add a kunitconfig file for lib/crypto/.
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib".
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaaj9YRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKyFZAP0b6KbEjGnQGE00nh6ChNrWs8RgyNx9
y+gtR2EMKnUf1wEA/q/VBPl5UgO3z4TrmJuSrpyMLzz+/XwUGJHKPEqTtwU=
=iJZE
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code
- Add a kunitconfig file for lib/crypto/
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib"
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Fix stale references to aes-generic
crypto: Clean up help text for CRYPTO_CRC32
crypto: Clean up help text for CRYPTO_CRC32C
crypto: Clean up help text for CRYPTO_XXHASH
crypto: Clean up help text for CRYPTO_SHA256
crypto: Clean up help text for CRYPTO_BLAKE2B
lib/crypto: tests: Add a .kunitconfig file
lib/crypto: tests: Depend on library options rather than selecting them
kunit: irq: Ensure timer doesn't fire too frequently
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmpxGcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1JK0H/0/nuSCYO/mtbdS9fwRsXrSd+Yphlkij
F+mF9NQx5HPzW4PbHT4erqQe02Kohyb40t57C+4LiaenbKXftPbmgO+d5RvN1AkK
L78f/pdxhpsN/MisUl466UgFwPiuv4XnMSrF9VpZAF16g4zqwWpyvZ0Z3qp0a1LW
3zBPl3Jag37lnKqCaPti/84R15uxn2wMpTGeaNZGNdG6lJwKCAVhKy3bvSp+6iQ6
QMUao6bWSCT2qq0kNWBxfWhrYhAYz3lCyu1qlSumB7qBt51eEXEmTW7O38DIDXMb
fVjlsNFDntIJl2vXn9zyM5kbOnpZ7EiOytKNli/LcxqtrY/PUWNQU6Y=
=CEPs
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
* tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM"
ACPICA: Update the _CPC definition to match ACPI 6.6
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched: fq: clear q->band_pkt_count[] in fq_reset()
- sched: only allow act_ct to bind to clsact/ingress qdiscs and
shared blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XGBM
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Merge a fix updating the _CPC object definition in ACPICA to avoid
printing a false-positive output package format warning on new
platforms (Saket Dumbre)
* acpica:
ACPICA: Update the _CPC definition to match ACPI 6.6
The task ownership state machine in sched_ext is quite hard to follow
from the code alone. The interaction of ownership states, memory
ordering rules and cross-CPU "lock dancing" makes the overall model
subtle.
Extend the documentation next to scx_ops_state to provide a more
structured and self-contained description of the state transitions and
their synchronization rules.
The new reference should make the code easier to reason about and
maintain and can help future contributors understand the overall
task-ownership workflow.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
bypass_lb_cpu() reads scx_bypass_lb_intv_us and scx_slice_bypass_us
without holding any lock, in timer callback context where module
parameter writes via sysfs can happen concurrently:
min_delta_us = scx_bypass_lb_intv_us / SCX_BYPASS_LB_MIN_DELTA_DIV;
^^^^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
if (delta < DIV_ROUND_UP(min_delta_us, scx_slice_bypass_us))
^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
scx_bypass_lb_intv_us already uses READ_ONCE() in scx_bypass_lb_timerfn()
and scx_bypass() for its other lock-free read sites, leaving
bypass_lb_cpu() inconsistent. scx_slice_bypass_us has the same
lock-free access pattern in the same function.
Fix both plain reads by using READ_ONCE() to complete the concurrent
access annotation and make the code KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
Larysa Zaremba says:
====================
Address XDP frags having negative tailroom
Aside from the issue described below, tailroom calculation does not account
for pages being split between frags, e.g. in i40e, enetc and
AF_XDP ZC with smaller chunks. These series address the problem by
calculating modulo (skb_frag_off() % rxq->frag_size) in order to get
data offset within a smaller block of memory. Please note, xskxceiver
tail grow test passes without modulo e.g. in xdpdrv mode on i40e,
because there is not enough descriptors to get to flipped buffers.
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case,
but due to tailroom being stored as an unsigned int, it is reported to be
somewhere near UINT_MAX, resulting in a tail being grown, even if the
requested offset is too much(it is around 2K in the abovementioned test).
This later leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169
[ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990
[ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff
[ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace 0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
The issue can also be easily reproduced with ice driver, by applying
the following diff to xskxceiver and enjoying a kernel panic in xdpdrv mode:
diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index 5af28f359cfd..042d587fa7ef 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -2541,8 +2541,8 @@ int testapp_adjust_tail_grow_mb(struct test_spec *test)
{
test->mtu = MAX_ETH_JUMBO_SIZE;
/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
- return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
- XSK_UMEM__LARGE_FRAME_SIZE * 2);
+ return testapp_adjust_tail(test, XSK_UMEM__MAX_FRAME_SIZE * 100,
+ 6912);
}
int testapp_tx_queue_consumer(struct test_spec *test)
If we print out the values involved in the tailroom calculation:
tailroom = rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag);
4294967040 = 3456 - 3456 - 256
I personally reproduced and verified the issue in ice and i40e,
aside from WiP ixgbevf implementation.
====================
Link: https://patch.msgid.link/20260305111253.2317394-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes: ac8a861f63 ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP RxQ info contains frag_size, which depends on the MTU. This makes the
old way of registering RxQ info before calculating new buffer sizes
invalid. Currently, it leads to frag_size being outdated, making it
sometimes impossible to grow tailroom in a mbuf packet. E.g. fragments are
actually 3K+, but frag size is still as if MTU was 1500.
Always register new XDP RxQ info after reconfiguring memory pools.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-4-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
