Commit graph

134,929 commits

Author SHA1 Message Date
Jerome Marchand
2b15287346 Staging: zram: make ZRAM depends on SYSFS
We can not configure zram device without sysfs anyway, so make zram
depends on it.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:06:18 -08:00
Max Vozeler
01446ef5af staging: usbip: vhci: use urb->dev->portnum to find port
The access to pending_port was racy when two devices
were being attached at the same time.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:50 -08:00
Max Vozeler
bd65f6233f staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
If there is a receive timeout without any active
requests, we can tell the connection was idle and
ignore the timeout.

If there are active requests for which we expect
to receive a reply we close the connection.

This makes it possible to set an upper bound on
the time a usbip device may be unresponsive.

This is a workaround for the lack of heart-beat
messages in the USBIP protocol.

Extending the protocol would break compatibility
with all previous stub versions, so this seems like
the lesser evil.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
7e249c8b07 staging: usbip: vhci: friendly log messages for connection errors
Also changes the event on connection close to be
VDEV_EVENT_DOWN - no functional change.

Signed-off-by: Max Vozeler <max@vozeler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
6d212153a8 staging: usbip: vhci: refuse to enqueue for dead connections
There can be requests to enqueue URBs while we are shutting
down a connection.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
b92a5e2373 staging: usbip: vhci: give back URBs from in-flight unlink requests
If we never received a RET_UNLINK because the TCP
connection broke the pending URBs still need to be
unlinked and given back.

Previously processes would be stuck trying to kill
the URB even after the device was detached.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
7606ee8aa3 staging: usbip: vhci: update reference count for usb_device
This fixes an oops observed when reading status during
removal of a device:

[ 1706.648285] general protection fault: 0000 [#1] SMP
[ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status
[ 1706.648297] CPU 1
[ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom
[ 1706.648324] Supported: Yes
[ 1706.648327] Pid: 10422, comm: usbip Tainted: G          N  2.6.32.12-0.7-xen #1
[ 1706.648330] RIP: e030:[<ffffffff801b10d5>]  [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648340] RSP: e02b:ffff8800a994dd30  EFLAGS: 00010286
[ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002
[ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c
[ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006
[ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab
[ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa
[ 1706.648363] FS:  00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000
[ 1706.648367] CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660
[ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200)
[ 1706.648385] Stack:
[ 1706.648387]  ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab
[ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004
[ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000
[ 1706.648404] Call Trace:
[ 1706.648413]  [<ffffffff801b28c9>] string+0x39/0xe0
[ 1706.648419]  [<ffffffff801b339b>] vsnprintf+0x1eb/0x620
[ 1706.648423]  [<ffffffff801b3813>] sprintf+0x43/0x50
[ 1706.648429]  [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd]
[ 1706.648438]  [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60
[ 1706.648445]  [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0
[ 1706.648451]  [<ffffffff800da4a7>] vfs_read+0xc7/0x130
[ 1706.648457]  [<ffffffff800da613>] sys_read+0x53/0xa0
[ 1706.648462]  [<ffffffff80007458>] system_call_fastpath+0x16/0x1b
[ 1706.648468]  [<00007f2f2de40f30>] 0x7f2f2de40f30
[ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83
[ 1706.648507] RIP  [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648511]  RSP <ffff8800a994dd30>
[ 1706.649575] ---[ end trace b4eb72bf2e149593 ]---

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:48 -08:00
Max Vozeler
2d8f4595d1 staging: usbip: stub: update refcounts for devices and interfaces
The stub driver expects to access the usb interface
and usb device structures even if the device has been
disconnected in the meantime.

This change gets a reference to them in the stub probe
function using usb_get_intf()/usb_get_dev() and drops them
in the disconnect function.

This fixes an oops observed with a Logic Controls Line
display (0fa8:a030) which disconnects itself when it is
reset:

[ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5
[ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0
[ 1348.562374] *pde = 00000000
[ 1348.562397] Oops: 0000 [#1]
[ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue
[ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via
[ 1348.562649]
[ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C
[ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0
[ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0
[ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00
[ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38
[ 1348.562824]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000)
[ 1348.562884] Stack:
[ 1348.562900]  d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230
[ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d
[ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94
[ 1348.563042] Call Trace:
[ 1348.563073]  [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip]
[ 1348.563114]  [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod]
[ 1348.563156]  [<c014e760>] ? autoremove_wake_function+0x0/0x50
[ 1348.563193]  [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod]
[ 1348.563230]  [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod]
[ 1348.563265]  [<c014e374>] ? kthread+0x74/0x80
[ 1348.563294]  [<c014e300>] ? kthread+0x0/0x80
[ 1348.563326]  [<c0103c47>] ? kernel_thread_helper+0x7/0x10
[ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b
[ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38
[ 1348.563570] CR2: 000000005f7433e5
[ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]---

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Tested-by: Steven Harms <sharms@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:48 -08:00
Roland Stigge
98069c3f1c Staging: iio: Documented output / DAC interface
Added documentation for:
* /sys/bus/iio/devices/deviceX/outY_scale
* /sys/bus/iio/devices/deviceX/outY_raw
* /sys/bus/iio/devices/deviceX/outY&Z_raw

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:59:04 -08:00
Marek Belisko
c331e766f9 staging: ft1000-pcmcia: Fix compilation errors.
Following patch will fix all compilation errors. Main problems
was with pcmcia API changes. Also remove BROKEN as now driver
is properly build.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Stano Lanci <chl.pixo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:59:03 -08:00
roel kluin
267024a9f6 Staging: iio: --/++ confusion in build_channel_array() error cleanup
Fix loop: it should decrement

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:58:17 -08:00
Pavan Savoy
4a5200ac8b drivers:staging: ti-st: delete old bt_drv driver
point the new v7 driver to build if ST_BT is selected
in Makefile and delete the old bt_drv driver.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:58:17 -08:00
Pavan Savoy
977016882d drivers:staging: ti-st: add the v7 btwilink driver
Add the btwilink driver which has undergone 7 revisions
of review. Based on bluetooth maintainer comments, since
there might be some re-work needed on underlying ST driver,
park the driver here.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:58:17 -08:00
Christopher Brannon
628f34282d staging: speakup: more fixes for init-failure handling.
We still leaked many resources when Speakup failed to initialize.
Examples of leaked resources include:
/dev/synth, keyboard or VT notifiers, and heap-allocated st_spk_t
structs.
This is fixed.

* We now use PTR_ERR to detect kthread_create failure
(thank you Dan Carpenter).

* The loop which frees members of the speakup_console array now iterates
over the whole array, not stopping at the first NULL value.  Fixes
a possible memory leak.  Safe because kfree(NULL) is a no-op.

* The order of some initializations was changed.  The safe ones, which
will never fail, are performed first.

Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:58:16 -08:00
Stefan Richter
324719978d firewire: net: is not experimental anymore
thanks to Clemens' and Maxim's fixes to firewire-ohci and -net in the
last two kernel releases.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-21 00:36:00 +01:00
Maxim Levitsky
74a1450499 firewire: net: invalidate ARP entries of removed nodes
This makes it possible to resume communication with a node that dropped
off the bus for a brief period.  Otherwise communication will only be
possible after ARP cache entry timeouts.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased)
2011-01-21 00:36:00 +01:00
Joe Perches
0bbfc0edb7 staging: brcm80211: Remove unnecessary memset(,0,)
kzalloc'd memory doesn't need a memset to 0.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:34:35 -08:00
Justin P. Mattock
eee3a67883 staging: brcm80211 Remove WAKE_LOCK
The patch below removes WAKE_LOCK since it is no longer in the kernel.
Please let me know, if this is the proper way of doing this and/or more needs
to be done..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:34:34 -08:00
Justin P. Mattock
e6856764dc staging: ath6kl Remove CONFIG_HAS_WAKELOCK
The patch below removes CONFIG_HAS_WAKELOCK since it is no longer in the kernel.
Please let me know, if this is the proper way of doing this and/or more needs
to be done..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:34:34 -08:00
Justin P. Mattock
2ae44d64b7 staging: brcm80211 dhd.h Remove CONFIG_HAS_WAKELOCK
Note:not sure if there is already something like this submitted or not.

The first two patches removes CONFIG_HAS_WAKELOCK since it is no longer in the kernel.
Please let me know, if this is the proper way of doing this and/or more needs
to be done..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:34:34 -08:00
Stefan Richter
6044565af4 firewire: core: fix unstable I/O with Canon camcorder
Regression since commit 1038953674, "firewire: core: check for 1394a
compliant IRM, fix inaccessibility of Sony camcorder":

The camcorder Canon MV5i generates lots of bus resets when asynchronous
requests are sent to it (e.g. Config ROM read requests or FCP Command
write requests) if the camcorder is not root node.  This causes drop-
outs in videos or makes the camcorder entirely inaccessible.
https://bugzilla.redhat.com/show_bug.cgi?id=633260

Fix this by allowing any Canon device, even if it is a pre-1394a IRM
like MV5i are, to remain root node (if it is at least Cycle Master
capable).  With the FireWire controller cards that I tested, MV5i always
becomes root node when plugged in and left to its own devices.

Reported-by: Ralf Lange
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org> # 2.6.32.y and newer
2011-01-21 00:27:46 +01:00
Roland Vossen
651bd3a9ff staging: brcm80211: replaced struct ht_cap_ie by struct ieee80211_ht_cap
Code cleanup. Replaced broadcom specific type by Linux counterpart.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:36 -08:00
Roland Vossen
0b8b430dda staging: brcm80211: deleted struct dot11_bcn_prb
Code cleanup. This struct did nothing useful in the code. Instances of this
struct and the code that read them were removed as well.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:35 -08:00
Roland Vossen
d83b2a8a89 staging: brcm80211: cleaned up macros in 802.11.h
Code cleanup. Cleaned up 802.11 type and subtype related macros by using
Linux defines instead of Broadcom defined ones.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:35 -08:00
Roland Vossen
04795017b7 staging: brcm80211: replaced some ieee80211 preprocessor constants part 2
Code cleanup.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:35 -08:00
Roland Vossen
3726ed4d55 staging: brcm80211: replaced some ieee80211 preprocessor constants part 1
Code cleanup.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:35 -08:00
Roland Vossen
392308d00e staging: brcm80211: replaced struct dot11_management_header with ieee80211_mgmt
Code cleanup.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:34 -08:00
Roland Vossen
3e9796f9d4 staging: brcm80211: replaced struct dot11_header by struct ieee80211_hdr
Code cleanup. Replaced Broadcom specific structure by its Linux equivalent.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:34 -08:00
Roland Vossen
f3dc3ea4bb staging: brcm80211: replaced struct dot11_rts_frame by struct ieee80211_rts
Code cleanup. Replacing Broadcom specific definitions with Linux counterpart.
Not tested yet.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:34 -08:00
Roland Vossen
d69a135806 staging: brcm80211: replaced 5Ghz specific wf_channel2mhz()
Code cleanup related. Replaced broadcom specific function with Linux function
ieee80211_dsss_chan_to_freq().

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:34 -08:00
Roland Vossen
1b1d36b6e8 staging: brcm80211: replaced 2.4Ghz specific wf_channel2mhz()
2.4 Ghz code cleanup related. Replaced broadcom specific function with Linux
function ieee80211_dsss_chan_to_freq().

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:20:33 -08:00
Arend van Spriel
a44d42367f staging: brcm80211: last nail into proto/ethernet.h
cleaned up last artifacts used from proto/ethernet.h and
subsequently the file can be removed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:42 -08:00
Arend van Spriel
1e6610862c staging: brcm80211: remove usage of packet section macros
Removed include construction used to solve compiler differences
related to packed structure types. Now GNUC variant of packed
structure is used explicitly.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:42 -08:00
Arend van Spriel
35af876454 staging: brcm80211: removed usage of proto/wpa.h file
Definitions used either had linux equivalent or were only used in
one source file. Changes were made accordingly and proto/wpa.h
has been removed from the driver sources.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:41 -08:00
Arend van Spriel
7925465bc5 staging: brcm80211: cleanup proto/ethernet.h include
Most definitions have been removed. Last definitions and the file
itself are going to be removed in a later stage.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:41 -08:00
Arend van Spriel
e2582ad85a staging: brcm80211: remove usage of struct ether_header
In linux the is already a structure defined for the ethernet
header. Code now uses struct ethhdr instead.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:41 -08:00
Arend van Spriel
c09240ac4b staging: brcm80211: move definition of ETHER_TYPE_BRCM to source file
The ethertype BRCM is used in single source file and consequently
move there.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:41 -08:00
Arend van Spriel
541f05fea2 staging: brcm80211: remove usage of ETHER_MAX_LEN definition
The linux include file if_ether.h already provides a definition
ETH_FRAME_LEN although this is excluding checksum. So code uses
ETH_FRAME_LEN+ETH_FCS_LEN now.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:17:40 -08:00
Uwe Kleine-König
7350968193 staging/hv/osd: don't reimplement ALIGN macro
The ALIGN_DOWN macro was only used in NUM_PAGES_SPANNED.  So make the
latter easier and get rid of the former.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:14:18 -08:00
Ky Srinivasan
cc04acf53f Staging: hv: Add a user-space daemon to support key/value pair (KVP)
All guest specific data gathering is implemented in a user-mode daemon.
The kernel component of KVP passes the "key" to this daemon and
the daemon is responsible for passing back the corresponding
value. This daemon communicates with the kernel
component via a netlink channel.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:11:15 -08:00
Ky Srinivasan
245ba56a52 Staging: hv: Implement key/value pair (KVP)
This is an implementation of the key value/pair (KVP) functionality
for Linux guests hosted on HyperV. This component communicates
with the host to support the KVP functionality.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:09:26 -08:00
Ky Srinivasan
008c789185 Staging: hv: Rename hv_utils.c to hv_util.c
The hv_utils module will be composed of more than one file;
rename hv_utils.c to accommodate this without changing the module name.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 15:09:08 -08:00
Linus Torvalds
b23fffd778 ACPI / Battery: remove battery refresh on resume
This partially reverts commit da8aeb92d4
("ACPI / Battery: Update information on info notification and resume"),
which causes a hang on resume on at least some machines.

This bug was bisected on an ASUS EeePC 901, which hangs at resume time
if we do that "acpi_battery_refresh(battery)" in the battery resume
function.

Rafael suspects we'll still need to refresh the sysfs files upon resume,
but that that can be done from a PM notifier (that will run after
thawing user space).

Bisected-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 13:14:10 -08:00
Omar Ramirez Luna
85d139c977 staging: tidspbridge: replace mbox callback with notifier_call
Lately, mailbox callbacks have been replaced by notifier block
call chains, this needs to be changed in the users of mailbox,
otherwise compilation will break due to missing parameters.

For this new change to work, io_mbox_msg needs to be compatible
with the notifier_call definition.

Reported-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:19:47 -08:00
Ian Abbott
d1ce318496 staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
The ni_labpc driver module only requests a shared IRQ for PCI devices,
requesting a non-shared IRQ for non-PCI devices.
As this module is also used by the ni_labpc_cs module for certain
National Instruments PCMCIA cards, it also needs to request a shared IRQ
for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus
controller.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:15:51 -08:00
roel kluin
e7bf352fcd Staging: speakup: &&/|| confusion in silent_store()
Fix test: the branch is always taken.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:07 -08:00
Roland Stigge
e71a7fd259 iio: Fixpoint formatted output bugfix
Fix some ADC drivers' _scale interface to correct fixpoint formatted output

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:07 -08:00
Denis Kirjanov
9c33008412 staging: rt2860: Fix incorrect netif_stop_queue usage warning
The TX queues are allocated inside register_netdev.
It doesn't make any sense to stop the queue before
allocation.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:06 -08:00
Larry Finger
e375870b92 staging: r8712u: Fix memory leak in firmware loading
The error path leaks the firmware struct.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:24 -08:00
Guzman Lugo, Fernando
8e290fd41a staging: tidspbridge: configure full L1 MMU range
IVA MMU can manage up to 4GB of address space through its page tables,
given that it's L1 is divided into 1MB sections it requires at least
16KB for its table which represents 4096 entries of 32 bits each.

Previously, only 1GB was being handled by setting the page table size
to 4KB, any virtual address beyond of the L1 size used, would fall
into memory that does not belong to L1 translation tables, leading to
unpredictable results.

So, set the L1 table size to cover the entire MMU range (4GB) whether
is meant to be used or not.

Reported-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:24 -08:00