Commit graph

1,320,548 commits

Author SHA1 Message Date
Trond Myklebust
816a6f60c2 NFS: Fix the setting of capabilities when automounting a new filesystem
commit b01f21cacd upstream.

Capabilities cannot be inherited when we cross into a new filesystem.
They need to be reset to the minimal defaults, and then probed for
again.

Fixes: 54ceac4515 ("NFS: Share NFS superblocks per-protocol per-server per-FSID")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:14 +02:00
Dai Ngo
944ec8c775 NFSD: detect mismatch of file handle and delegation stateid in OPEN op
commit 9c65001c57 upstream.

When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.

Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.

Reported-by: Petro Pavlov <petro.pavlov@vastdata.com>
Fixes: c44c5eeb2c ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:14 +02:00
Jeff Layton
74ad36ed60 nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm()
commit 908e4ead7f upstream.

Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.

Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.

In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().

Reported-by: lei lu <llfamsec@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/
Fixes: d20c11d86d ("nfsd: Protect session creation and client confirm using client_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:14 +02:00
Xu Yang
ee2cd40b0b net: usb: asix_devices: add phy_mask for ax88772 mdio bus
commit 4faff70959 upstream.

Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.

Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:14 +02:00
Johan Hovold
e6ec7aa021 net: dpaa: fix device leak when querying time stamp info
commit 3fa840230f upstream.

Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.

Note that holding a reference to the ptp device does not prevent its
driver data from going away.

Fixes: 17ae0b0ee9 ("dpaa_eth: add the get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org	# 4.19
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:14 +02:00
Johan Hovold
400177f147 net: ti: icss-iep: fix device and OF node leaks at probe
commit e05c54974a upstream.

Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.

Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().

Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Cc: stable@vger.kernel.org	# 6.6
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Johan Hovold
8de5f47f34 net: mtk_eth_soc: fix device leak at probe
commit 3e13274ca8 upstream.

The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.

Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Cc: stable@vger.kernel.org	# 5.19
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Johan Hovold
3328ff844e net: enetc: fix device and OF node leak at probe
commit 70458f8a6b upstream.

Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.

Fixes: e7d48e5fbf ("net: enetc: add a mini driver for the Integrated Endpoint Register Block")
Cc: stable@vger.kernel.org	# 5.13
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Johan Hovold
744d9cf898 net: gianfar: fix device leak when querying time stamp info
commit da717540ac upstream.

Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.

Note that holding a reference to the ptp device does not prevent its
driver data from going away.

Fixes: 7349a74ea7 ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Cc: stable@vger.kernel.org	# 4.18
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-4-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Heiner Kallweit
ae59ec969c net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
commit e88fbc30dd upstream.

After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.

Fixes: e24a6c8746 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Florian Larysch
e6269d9878 net: phy: micrel: fix KSZ8081/KSZ8091 cable test
commit 49db61c27c upstream.

Commit 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.

However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.

Fix this by setting both struct members accordingly.

Fixes: 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Larysch <fl@n621.de>
Link: https://patch.msgid.link/20250723222250.13960-1-fl@n621.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Fedor Pchelkin
44ddd7b1ae netlink: avoid infinite retry looping in netlink_unicast()
commit 759dfc7d04 upstream.

netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:

  rmem < READ_ONCE(sk->sk_rcvbuf)

to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:

  rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)

The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu:     0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
  (t=26000 jiffies g=230833 q=259957)
  NMI backtrace for cpu 0
  CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
  Call Trace:
  <IRQ>
  dump_stack lib/dump_stack.c:120
  nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
  nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
  rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
  rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
  update_process_times kernel/time/timer.c:1953
  tick_sched_handle kernel/time/tick-sched.c:227
  tick_sched_timer kernel/time/tick-sched.c:1399
  __hrtimer_run_queues kernel/time/hrtimer.c:1652
  hrtimer_interrupt kernel/time/hrtimer.c:1717
  __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
  asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
  </IRQ>

  netlink_attachskb net/netlink/af_netlink.c:1234
  netlink_unicast net/netlink/af_netlink.c:1349
  kauditd_send_queue kernel/audit.c:776
  kauditd_thread kernel/audit.c:897
  kthread kernel/kthread.c:328
  ret_from_fork arch/x86/entry/entry_64.S:304

Restore the original behavior of the check which commit in Fixes
accidentally missed when restructuring the code.

Found by Linux Verification Center (linuxtesting.org).

Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250728080727.255138-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Daniel Golle
cb9bb87236 Revert "leds: trigger: netdev: Configure LED blink interval for HW offload"
commit 26f732791f upstream.

This reverts commit c629c972b3.

While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.

This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.

Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.

Fixes: c629c972b3 ("leds: trigger: netdev: Configure LED blink interval for HW offload")
Link: https://lore.kernel.org/linux-leds/c6134e26-2e45-4121-aa15-58aaef327201@lunn.ch/T/#m9d6fe81bbcb273e59f12bbedbd633edd32118387
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6dcc77ee1c9676891d6250d8994850f521426a0f.1752334655.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
Krzysztof Kozlowski
12c4d55dd0 leds: flash: leds-qcom-flash: Fix registry access after re-bind
commit fab15f5736 upstream.

Driver in probe() updates each of 'reg_field' with 'reg_base':

	for (i = 0; i < REG_MAX_COUNT; i++)
		regs[i].reg += reg_base;

'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses.  Constify the local 'reg_field' array and duplicate
it in probe to solve this.

Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
David Thompson
f3a2d068e0 gpio: mlxbf3: use platform_get_irq_optional()
commit 810bd9066f upstream.

The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
    mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found

Cc: stable@vger.kernel.org
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:13 +02:00
David Thompson
1ce6f627a3 Revert "gpio: mlxbf3: only get IRQ for device instance 0"
commit 56bdf7270f upstream.

This reverts commit 10af0273a3.

While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.

Cc: stable@vger.kernel.org
Fixes: 10af0273a3 ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
David Thompson
78b086e110 gpio: mlxbf2: use platform_get_irq_optional()
commit 63c7bc53a3 upstream.

The gpio-mlxbf2 driver interfaces with four GPIO controllers,
device instances 0-3. There are two IRQ resources shared between
the four controllers, and they are found in the ACPI table for
instances 0 and 3. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instances 1 and 2:
  mlxbf2_gpio MLNXBF22:01: error -ENXIO: IRQ index 0 not found

Fixes: 2b725265cb ("gpio: mlxbf2: Introduce IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250728144619.29894-1-davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Harald Mommer
5d6c696da5 gpio: virtio: Fix config space reading.
commit 4740e1e2f3 upstream.

Quote from the virtio specification chapter 4.2.2.2:

"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."

Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Fixes: 3a29355a22 ("gpio: Add virtio-gpio driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250724143718.5442-2-harald.mommer@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Wang Zhaolong
b3f7932c8e smb: client: remove redundant lstrp update in negotiate protocol
commit e19d8dd694 upstream.

Commit 34331d7bee ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.

The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.

Additionally, commit 266b5d02e1 ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.

Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.

Fixes: 266b5d02e1 ("smb: client: fix race condition in negotiate timeout by using more precise timing")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Steve French
8de33d4d72 smb3: fix for slab out of bounds on mount to ksmbd
commit 7d34ec36ab upstream.

With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):

 BUG: KASAN: slab-out-of-bounds in
 parse_server_interfaces+0x14ee/0x1880 [cifs]
 Read of size 4 at addr ffff8881433dba98 by task mount/9827

 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
 OE       6.16.0-rc2-kasan #2 PREEMPT(voluntary)
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
 BIOS 2.13.1 06/14/2019
 Call Trace:
  <TASK>
 dump_stack_lvl+0x9f/0xf0
 print_report+0xd1/0x670
 __virt_addr_valid+0x22c/0x430
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? kasan_complete_mode_report_info+0x2a/0x1f0
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
   kasan_report+0xd6/0x110
   parse_server_interfaces+0x14ee/0x1880 [cifs]
   __asan_report_load_n_noabort+0x13/0x20
   parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
 ? trace_hardirqs_on+0x51/0x60
 SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
 ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
 ? SMB2_tcon+0x23c/0x15d0 [cifs]
 smb3_qfs_tcon+0x173/0x2b0 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 cifs_mount_get_tcon+0x369/0xb90 [cifs]
 ? dfs_cache_find+0xe7/0x150 [cifs]
 dfs_mount_share+0x985/0x2970 [cifs]
 ? check_path.constprop.0+0x28/0x50
 ? save_trace+0x54/0x370
 ? __pfx_dfs_mount_share+0x10/0x10 [cifs]
 ? __lock_acquire+0xb82/0x2ba0
 ? __kasan_check_write+0x18/0x20
 cifs_mount+0xbc/0x9e0 [cifs]
 ? __pfx_cifs_mount+0x10/0x10 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
 cifs_smb3_do_mount+0x263/0x1990 [cifs]

Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Christopher Eby
33eb2d87e0 ALSA: hda/realtek: Add Framework Laptop 13 (AMD Ryzen AI 300) to quirks
commit 0db77eccd9 upstream.

Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.

Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Vasiliy Kovalev
fc7fd29b28 ALSA: hda/realtek: Fix headset mic on HONOR BRB-X
commit b26e2afb38 upstream.

Add a PCI quirk to enable microphone input on the headphone jack on
the HONOR BRB-X M1010 laptop.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250811132716.45076-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Takashi Iwai
ae17b3b5e7 ALSA: usb-audio: Validate UAC3 cluster segment descriptors
commit ecfd41166b upstream.

UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too.  Otherwise malicious firmware may lead to
the unexpected OOB accesses.

Fixes: 11785ef532 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Takashi Iwai
cd08d390d1 ALSA: usb-audio: Validate UAC3 power domain descriptors, too
commit d832ccbc30 upstream.

UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.

Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:12 +02:00
Pavel Begunkov
ecc39c79d9 io_uring: don't use int for ABI
commit cf73d9970e upstream.

__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.

Cc: stable@vger.kernel.org
Fixes: 2b188cc1bb ("Add io_uring IO interface")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/47c666c4ee1df2018863af3a2028af18feef11ed.1751412511.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20 18:30:11 +02:00
Greg Kroah-Hartman
880e4ff5d6 Linux 6.12.42 v6.12.42
Link: https://lore.kernel.org/r/20250812173014.736537091@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Brett Mastbergen <bmastbergen@ciq.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Tao Xue
5f06ee9f9a usb: gadget : fix use-after-free in composite_dev_cleanup()
commit 151c0aa896 upstream.

1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.

BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1

CPU: 10 PID: 1 Comm: init Tainted: G           O      5.10.97-oh #1
 kasan_report+0x188/0x1cc
 __asan_load8+0xb4/0xbc
 composite_dev_cleanup+0xf4/0x2c0
 configfs_composite_bind+0x210/0x7ac
 udc_bind_to_driver+0xb4/0x1ec
 usb_gadget_probe_driver+0xec/0x21c
 gadget_dev_desc_UDC_store+0x264/0x27c

Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Link: https://lore.kernel.org/r/20250721093908.14967-1-xuetao09@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Yuhao Jiang
0ab3ae768c USB: gadget: f_hid: Fix memory leak in hidg_bind error path
commit 62783c30d7 upstream.

In hidg_bind(), if alloc_workqueue() fails after usb_assign_descriptors()
has successfully allocated the USB descriptors, the current error handling
does not call usb_free_all_descriptors() to free the allocated descriptors,
resulting in a memory leak.

Restructure the error handling by adding proper cleanup labels:
- fail_free_all: cleans up workqueue and descriptors
- fail_free_descs: cleans up descriptors only
- fail: original cleanup for earlier failures

This ensures that allocated resources are properly freed in reverse order
of their allocation, preventing the memory leak when alloc_workqueue() fails.

Fixes: a139c98f76 ("USB: gadget: f_hid: Add GET_REPORT via userspace IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Link: https://lore.kernel.org/r/20250623094844.244977-1-danisjiang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Qasim Ijaz
ba08cc6801 HID: apple: validate feature-report field count to prevent NULL pointer dereference
commit 1bb3363da8 upstream.

A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL
pointer dereference whilst the power feature-report is toggled and sent to
the device in apple_magic_backlight_report_set(). The power feature-report
is expected to have two data fields, but if the descriptor declares one
field then accessing field[1] and dereferencing it in
apple_magic_backlight_report_set() becomes invalid
since field[1] will be NULL.

An example of a minimal descriptor which can cause the crash is something
like the following where the report with ID 3 (power report) only
references a single 1-byte field. When hid core parses the descriptor it
will encounter the final feature tag, allocate a hid_report (all members
of field[] will be zeroed out), create field structure and populate it,
increasing the maxfield to 1. The subsequent field[1] access and
dereference causes the crash.

  Usage Page (Vendor Defined 0xFF00)
  Usage (0x0F)
  Collection (Application)
    Report ID (1)
    Usage (0x01)
    Logical Minimum (0)
    Logical Maximum (255)
    Report Size (8)
    Report Count (1)
    Feature (Data,Var,Abs)

    Usage (0x02)
    Logical Maximum (32767)
    Report Size (16)
    Report Count (1)
    Feature (Data,Var,Abs)

    Report ID (3)
    Usage (0x03)
    Logical Minimum (0)
    Logical Maximum (1)
    Report Size (8)
    Report Count (1)
    Feature (Data,Var,Abs)
  End Collection

Here we see the KASAN splat when the kernel dereferences the
NULL pointer and crashes:

  [   15.164723] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN NOPTI
  [   15.165691] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
  [   15.165691] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0 #31 PREEMPT(voluntary)
  [   15.165691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
  [   15.165691] RIP: 0010:apple_magic_backlight_report_set+0xbf/0x210
  [   15.165691] Call Trace:
  [   15.165691]  <TASK>
  [   15.165691]  apple_probe+0x571/0xa20
  [   15.165691]  hid_device_probe+0x2e2/0x6f0
  [   15.165691]  really_probe+0x1ca/0x5c0
  [   15.165691]  __driver_probe_device+0x24f/0x310
  [   15.165691]  driver_probe_device+0x4a/0xd0
  [   15.165691]  __device_attach_driver+0x169/0x220
  [   15.165691]  bus_for_each_drv+0x118/0x1b0
  [   15.165691]  __device_attach+0x1d5/0x380
  [   15.165691]  device_initial_probe+0x12/0x20
  [   15.165691]  bus_probe_device+0x13d/0x180
  [   15.165691]  device_add+0xd87/0x1510
  [...]

To fix this issue we should validate the number of fields that the
backlight and power reports have and if they do not have the required
number of fields then bail.

Fixes: 394ba612f9 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Link: https://patch.msgid.link/20250713233008.15131-1-qasdev00@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Julien Massot
68e5579f4d media: ti: j721e-csi2rx: fix list_del corruption
commit ae42c6fe53 upstream.

If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is
marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue.
This causes the same buffer to be retried in the next iteration, resulting
in a double list_del() and eventual list corruption.

Fix this by removing the buffer from the queue before calling
vb2_buffer_done() on error.

This resolves a crash due to list_del corruption:
[   37.811243] j721e-csi2rx 30102000.ticsi2rx: Failed to queue the next buffer for DMA
[   37.832187]  slab kmalloc-2k start ffff00000255b000 pointer offset 1064 size 2048
[   37.839761] list_del corruption. next->prev should be ffff00000255bc28, but was ffff00000255d428. (next=ffff00000255b428)
[   37.850799] ------------[ cut here ]------------
[   37.855424] kernel BUG at lib/list_debug.c:65!
[   37.859876] Internal error: Oops - BUG: 00000000f2000800 [#1]  SMP
[   37.866061] Modules linked in: i2c_dev usb_f_rndis u_ether libcomposite dwc3 udc_core usb_common aes_ce_blk aes_ce_cipher ghash_ce gf128mul sha1_ce cpufreq_dt dwc3_am62 phy_gmii_sel sa2ul
[   37.882830] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.16.0-rc3+ #28 VOLUNTARY
[   37.890851] Hardware name: Bosch STLA-GSRV2-B0 (DT)
[   37.895737] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   37.902703] pc : __list_del_entry_valid_or_report+0xdc/0x114
[   37.908390] lr : __list_del_entry_valid_or_report+0xdc/0x114
[   37.914059] sp : ffff800080003db0
[   37.917375] x29: ffff800080003db0 x28: 0000000000000007 x27: ffff800080e50000
[   37.924521] x26: 0000000000000000 x25: ffff0000016abb50 x24: dead000000000122
[   37.931666] x23: ffff0000016abb78 x22: ffff0000016ab080 x21: ffff800080003de0
[   37.938810] x20: ffff00000255bc00 x19: ffff00000255b800 x18: 000000000000000a
[   37.945956] x17: 20747562202c3832 x16: 6362353532303030 x15: 0720072007200720
[   37.953101] x14: 0720072007200720 x13: 0720072007200720 x12: 00000000ffffffea
[   37.960248] x11: ffff800080003b18 x10: 00000000ffffefff x9 : ffff800080f5b568
[   37.967396] x8 : ffff800080f5b5c0 x7 : 0000000000017fe8 x6 : c0000000ffffefff
[   37.974542] x5 : ffff00000fea6688 x4 : 0000000000000000 x3 : 0000000000000000
[   37.981686] x2 : 0000000000000000 x1 : ffff800080ef2b40 x0 : 000000000000006d
[   37.988832] Call trace:
[   37.991281]  __list_del_entry_valid_or_report+0xdc/0x114 (P)
[   37.996959]  ti_csi2rx_dma_callback+0x84/0x1c4
[   38.001419]  udma_vchan_complete+0x1e0/0x344
[   38.005705]  tasklet_action_common+0x118/0x310
[   38.010163]  tasklet_action+0x30/0x3c
[   38.013832]  handle_softirqs+0x10c/0x2e0
[   38.017761]  __do_softirq+0x14/0x20
[   38.021256]  ____do_softirq+0x10/0x20
[   38.024931]  call_on_irq_stack+0x24/0x60
[   38.028873]  do_softirq_own_stack+0x1c/0x40
[   38.033064]  __irq_exit_rcu+0x130/0x15c
[   38.036909]  irq_exit_rcu+0x10/0x20
[   38.040403]  el1_interrupt+0x38/0x60
[   38.043987]  el1h_64_irq_handler+0x18/0x24
[   38.048091]  el1h_64_irq+0x6c/0x70
[   38.051501]  default_idle_call+0x34/0xe0 (P)
[   38.055783]  do_idle+0x1f8/0x250
[   38.059021]  cpu_startup_entry+0x34/0x3c
[   38.062951]  rest_init+0xb4/0xc0
[   38.066186]  console_on_rootfs+0x0/0x6c
[   38.070031]  __primary_switched+0x88/0x90
[   38.074059] Code: b00037e0 91378000 f9400462 97e9bf49 (d4210000)
[   38.080168] ---[ end trace 0000000000000000 ]---
[   38.084795] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt
[   38.092197] SMP: stopping secondary CPUs
[   38.096139] Kernel Offset: disabled
[   38.099631] CPU features: 0x0000,00002000,02000801,0400420b
[   38.105202] Memory Limit: none
[   38.108260] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---

Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Suggested-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Robin Murphy
efee62c5fc perf/arm-ni: Set initial IRQ affinity
commit c872d7c837 upstream.

While we do request our IRQs with the right flags to stop their affinity
changing unexpectedly, we forgot to actually set it to start with. Oops.

Cc: stable@vger.kernel.org
Fixes: 4d5a7680f2 ("perf: Add driver for Arm NI-700 interconnect PMU")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Shouping Wang <allen.wang@hj-micro.com>
Link: https://lore.kernel.org/r/614ced9149ee8324e58930862bd82cbf46228d27.1747149165.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Kemeng Shi
91b370800b mm: swap: fix potential buffer overflow in setup_clusters()
commit 152c1339dc upstream.

In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.

Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue.

Link: https://lkml.kernel.org/r/20250522122554.12209-4-shikemeng@huaweicloud.com
Fixes: b843786b0b ("mm: swapfile: fix SSD detection with swapfile on btrfs")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Kemeng Shi
f7c75406b7 mm: swap: correctly use maxpages in swapon syscall to avoid potential deadloop
commit 255116c5b0 upstream.

We use maxpages from read_swap_header() to initialize swap_info_struct,
however the maxpages might be reduced in setup_swap_extents() and the
si->max is assigned with the reduced maxpages from the
setup_swap_extents().

Obviously, this could lead to memory waste as we allocated memory based on
larger maxpages, besides, this could lead to a potential deadloop as
following:

1) When calling setup_clusters() with larger maxpages, unavailable
   pages within range [si->max, larger maxpages) are not accounted with
   inc_cluster_info_page().  As a result, these pages are assumed
   available but can not be allocated.  The cluster contains these pages
   can be moved to frag_clusters list after it's all available pages were
   allocated.

2) When the cluster mentioned in 1) is the only cluster in
   frag_clusters list, cluster_alloc_swap_entry() assume order 0
   allocation will never failed and will enter a deadloop by keep trying
   to allocate page from the only cluster in frag_clusters which contains
   no actually available page.

Call setup_swap_extents() to get the final maxpages before
swap_info_struct initialization to fix the issue.

After this change, span will include badblocks and will become large
value which I think is correct value:
In summary, there are two kinds of swapfile_activate operations.

1. Filesystem style: Treat all blocks logical continuity and find
   usable physical extents in logical range.  In this way, si->pages will
   be actual usable physical blocks and span will be "1 + highest_block -
   lowest_block".

2. Block device style: Treat all blocks physically continue and only
   one single extent is added.  In this way, si->pages will be si->max and
   span will be "si->pages - 1".  Actually, si->pages and si->max is only
   used in block device style and span value is set with si->pages.  As a
   result, span value in block device style will become a larger value as
   you mentioned.

I think larger value is correct based on:

1. Span value in filesystem style is "1 + highest_block -
   lowest_block" which is the range cover all possible phisical blocks
   including the badblocks.

2. For block device style, si->pages is the actual usable block number
   and is already in pr_info.  The original span value before this patch
   is also refer to usable block number which is redundant in pr_info.

[shikemeng@huaweicloud.com: ensure si->pages == si->max - 1 after setup_swap_extents()]
  Link: https://lkml.kernel.org/r/20250522122554.12209-3-shikemeng@huaweicloud.com
  Link: https://lkml.kernel.org/r/20250718065139.61989-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250522122554.12209-3-shikemeng@huaweicloud.com
Fixes: 661383c611 ("mm: swap: relaim the cached parts that got scanned")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:14 +02:00
Andy Shevchenko
b85fe4c740 mm/hmm: move pmd_to_hmm_pfn_flags() to the respective #ifdeffery
commit 188cb385bb upstream.

When pmd_to_hmm_pfn_flags() is unused, it prevents kernel builds with
clang, `make W=1` and CONFIG_TRANSPARENT_HUGEPAGE=n:

  mm/hmm.c:186:29: warning: unused function 'pmd_to_hmm_pfn_flags' [-Wunused-function]

Fix this by moving the function to the respective existing ifdeffery
for its the only user.

See also:

  6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")

Link: https://lkml.kernel.org/r/20250710082403.664093-1-andriy.shevchenko@linux.intel.com
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Jiaxun Yang
1beca07bd9 MIPS: mm: tlb-r4k: Uniquify TLB entries on init
commit 35ad7e1815 upstream.

Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.

Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.

Cc: stable@kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Gerald Schaefer
082a639b1c s390/mm: Remove possible false-positive warning in pte_free_defer()
commit 5647f61ad9 upstream.

Commit 8211dad627 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.

However, it is possible that the warning is triggered in a valid case as
false-positive.

s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.

khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.

Therefore, remove the warning and the comment.

Fixes: 8211dad627 ("s390: add pte_free_defer() for pgtables sharing page")
Cc: <stable@vger.kernel.org> # 6.6+
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Dave Hansen
296742ab73 x86/fpu: Delay instruction pointer fixup until after warning
commit 1cec9ac2d0 upstream.

Right now, if XRSTOR fails a console message like this is be printed:

	Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers.

However, the text location (...+0x9a in this case) is the instruction
*AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump
also points one instruction late.

The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and
keep on running after returning from the #GP handler. But it does this
fixup before warning.

The resulting warning output is nonsensical because it looks like the
non-FPU-related instruction is #GP'ing.

Do not fix up RIP until after printing the warning. Do this by using
the more generic and standard ex_handler_default().

Fixes: d5c8028b47 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Acked-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Michael J. Ruhl
860d93bd6a platform/x86/intel/pmt: fix a crashlog NULL pointer access
commit 54d5cd4719 upstream.

Usage of the intel_pmt_read() for binary sysfs, requires a pcidev. The
current use of the endpoint value is only valid for telemetry endpoint
usage.

Without the ep, the crashlog usage causes the following NULL pointer
exception:

BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:intel_pmt_read+0x3b/0x70 [pmt_class]
Code:
Call Trace:
 <TASK>
 ? sysfs_kf_bin_read+0xc0/0xe0
 kernfs_fop_read_iter+0xac/0x1a0
 vfs_read+0x26d/0x350
 ksys_read+0x6b/0xe0
 __x64_sys_read+0x1d/0x30
 x64_sys_call+0x1bc8/0x1d70
 do_syscall_64+0x6d/0x110

Augment struct intel_pmt_entry with a pointer to the pcidev to avoid
the NULL pointer exception.

Fixes: 045a513040 ("platform/x86/intel/pmt: Use PMT callbacks")
Cc: stable@vger.kernel.org
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20250713172943.7335-2-michael.j.ruhl@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Edip Hazuri
76563060ec ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
commit a9dec09631 upstream.

My friend have Victus 16-d1xxx with board ID 8A26, the existing quirk
for Victus 16-d1xxx wasn't working because of different board ID

Tested on Victus 16-d1015nt Laptop. The LED behaviour works
as intended.

Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-4-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Edip Hazuri
9fb7f010eb ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
commit 956048a3cd upstream.

The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.

Tested on Victus 16-S0063NT Laptop. The LED behaviour works
as intended.

Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Edip Hazuri
0e1c67e9b8 ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
commit bd7814a4c0 upstream.

The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.

Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.

Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:13 +02:00
Geoffrey D. Bennett
e1c508818c ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
commit 8a15ca0ca5 upstream.

During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.

This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e16
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().

Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Closes: https://github.com/geoffreybennett/linux-fcp/issues/41
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Thorsten Blum
0f158abad0 ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
commit 8cbe564974 upstream.

In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.

Use the destination buffer size instead to ensure the card name is
copied correctly.

Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d6 ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Tom Lendacky
aed15fc08f x86/sev: Evict cache lines during SNP memory validation
Commit 7b306dfa32 upstream.

An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.

CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.

Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.

Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Ammar Faizi
c884cab3bb net: usbnet: Fix the wrong netif_carrier_on() call
commit 8466d39370 upstream.

The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.

The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.

Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8c ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
John Ernberg
d68a867d74 net: usbnet: Avoid potential RCU stall on LINK_CHANGE event
commit 0d9cfc9b8c upstream.

The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.

Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected

Where the last Connected is then a stable link state.

When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.

In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:

    rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
    rcu: blocking rcu_node structures (internal RCU debug):
    Sending NMI from CPU 1 to CPUs 0:
    NMI backtrace for cpu 0

    Call trace:
     arch_local_irq_enable+0x4/0x8
     local_bh_enable+0x18/0x20
     __netdev_alloc_skb+0x18c/0x1cc
     rx_submit+0x68/0x1f8 [usbnet]
     rx_alloc_submit+0x4c/0x74 [usbnet]
     usbnet_bh+0x1d8/0x218 [usbnet]
     usbnet_bh_tasklet+0x10/0x18 [usbnet]
     tasklet_action_common+0xa8/0x110
     tasklet_action+0x2c/0x34
     handle_softirqs+0x2cc/0x3a0
     __do_softirq+0x10/0x18
     ____do_softirq+0xc/0x14
     call_on_irq_stack+0x24/0x34
     do_softirq_own_stack+0x18/0x20
     __irq_exit_rcu+0xa8/0xb8
     irq_exit_rcu+0xc/0x30
     el1_interrupt+0x34/0x48
     el1h_64_irq_handler+0x14/0x1c
     el1h_64_irq+0x68/0x6c
     _raw_spin_unlock_irqrestore+0x38/0x48
     xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
     unlink1+0xd4/0xdc [usbcore]
     usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
     usb_unlink_urb+0x24/0x44 [usbcore]
     unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
     __handle_link_change+0x34/0x70 [usbnet]
     usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
     process_scheduled_works+0x2d0/0x48c
     worker_thread+0x150/0x1dc
     kthread+0xd8/0xe8
     ret_from_fork+0x10/0x20

Get around the problem by delaying the carrier on to the scheduled work.

This needs a new flag to keep track of the necessary action.

The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.

Fixes: 4b49f58fff ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Zenm Chen
8c2b840c54 Bluetooth: btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
commit d9da920233 upstream.

Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano which is based on
a Realtek RTL8851BU chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=3625 ProdID=010b Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8851bu
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Ilpo Järvinen
1331e908f2 PCI/ASPM: Fix L1SS saving
commit 7507eb3e7b upstream.

Commit 1db806ec06 ("PCI/ASPM: Save parent L1SS config in
pci_save_aspm_l1ss_state()") aimed to perform L1SS config save for both the
Upstream Port and its upstream bridge when handling an Upstream Port, which
matches what the L1SS restore side does. However, parent->state_saved can
be set true at an earlier time when the upstream bridge saved other parts
of its state. Then later when attempting to save the L1SS config while
handling the Upstream Port, parent->state_saved is true in
pci_save_aspm_l1ss_state() resulting in early return and skipping saving
bridge's L1SS config because it is assumed to be already saved. Later on
restore, junk is written into L1SS config which causes issues with some
devices.

Remove parent->state_saved check and unconditionally save L1SS config also
for the upstream bridge from an Upstream Port which ought to be harmless
from correctness point of view. With the Upstream Port check now present,
saving the L1SS config more than once for the bridge is no longer a problem
(unlike when the parent->state_saved check got introduced into the fix
during its development).

Link: https://lore.kernel.org/r/20250131152913.2507-1-ilpo.jarvinen@linux.intel.com
Fixes: 1db806ec06 ("PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219731
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/r/CAJZ5v0iKmynOQ5vKSQbg1J_FmavwZE-nRONovOZ0mpMVauheWg@mail.gmail.com
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/d7246feb-4f3f-4d0c-bb64-89566b170671@molgen.mpg.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Jian-Hong Pan
78b3007eb0 PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()
commit 1db806ec06 upstream.

After 17423360a2 ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"), pci_save_aspm_l1ss_state(dev) saves the L1SS state for
"dev", and pci_restore_aspm_l1ss_state(dev) restores the state for both
"dev" and its parent.

The problem is that unless pci_save_state() has been used in some other
path and has already saved the parent L1SS state, we will restore junk to
the parent, which means the L1 Substates likely won't work correctly.

Save the L1SS config for both the device and its parent in
pci_save_aspm_l1ss_state().  When restoring, we need both because L1SS must
be enabled at the parent (the Downstream Port) before being enabled at the
child (the Upstream Port).

Link: https://lore.kernel.org/r/20241115072200.37509-3-jhp@endlessos.org
Fixes: 17423360a2 ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
[bhelgaas: parallel save/restore structure, simplify commit log, patch at
https://lore.kernel.org/r/20241212230340.GA3267194@bhelgaas]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org> # Asus B1400CEAE
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00
Slark Xiao
8d2026704a USB: serial: option: add Foxconn T99W709
commit ad1244e1ce upstream.

T99W709 is designed based on MTK T300(5G redcap) chip. There are
7 serial ports to be enumerated: AP_LOG, GNSS, AP_META, AT,
MD_META, NPT, DBG. RSVD(5) for ADB port.

test evidence as below:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e15f Rev=00.01
S:  Manufacturer=MediaTek Inc.
S:  Product=USB DATA CARD
S:  SerialNumber=355511220000399
C:  #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
I:  If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15 12:14:12 +02:00