* 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
ARM: mach-shmobile: bonito: make sure static function
ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images
ARM: mach-shmobile: mackerel: Add FSI DMAEngine support
The function bonito_add_early_devices() needs to be static.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
We need undocumented address to use DMA.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If the clocks is always same value as the parent clock,
we can use followparent_recalc() for .recalc
Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
R8A7740 USB needs many clocks for workaround,
and it has confusing name "usb24s" and "usb24".
This "usb24s" will be used by other clocks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Current workaround of I2C on r8a7740 used mdelay(),
but it was an overkill.
This patch cleans up the workaround delay.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Update the mach-shmobile shared delay calibration code for late
timers. All existing in-tree non-DT socs are however using early
timers today and they are unaffected by this change.
The patch modifies shmobile_setup_delay() from using lpj_fine
to preset_lpj. This change allows us to preset the worst case
loops-per-jiffy value to all CPU cores on the system.
The old code which made use of lpj_fine did not affect the
secondary CPU cores which made it impossible to boot on SMP
without early timers.
Needed for SMP SoCs using late timers like EMEV2 or any other
mach-shmobile SMP SoC that makes use of late timers via DT.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make sure L1 caches are invalidated when booting secondary
cores. Needed to boot all mach-shmobile SMP systems that
are using Cortex-A9 including sh73a0, r8a7779 and EMEV2.
Thanks to imx and tegra guys for actual code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Fix SMP TWD boot regression on sh73a0 based platforms caused by:
4200b16 ARM: shmobile: convert to twd_local_timer_register() interface
After the merge of the above commit it has been impossible to boot
sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.
This patch fixes the regression on sh73a0 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.
This patch removed shmobile_twd_init() which is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Fix SMP TWD boot regression on r8a7779 based platforms caused by:
4200b16 ARM: shmobile: convert to twd_local_timer_register() interface
After the merge of the above commit it has been impossible to boot
r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The
kernel crashes at smp_init_cpus() timing which is before the console
has been initialized, so to the user this looks like a kernel lock up
without any particular error message.
This patch fixes the regression on r8a7779 by moving the TWD
registration code from smp_init_cpus() to sys_timer->init() time.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This also fixes the following modular mmc build failure:
arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd':
pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change'
on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This also fixes the following modular mmc build failure:
arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd':
pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change'
on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Note that these are based on omap-pm-regulator-for-v3.5 as
both branches are adding twl regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJPqu7RAAoJEBvUPslcq6VzC3sQAI5xS3PyPaU+kP1mSNl85wKH
wFnYenRP2VYkvlPOnFz1SrZNROFBrRdqc7gbHFeV/gfn5qbMBb430mKlO4Q2eh5S
kYUI4DlWrXn8Z19hfZOTK1HTL/Mtcvb08XLUI1hN6NUhutjQOT5Rs2yWWVC2Y0MU
Ov5FYz6oLwxAFkiezgeNnKzeCkMX+RX+9DwTOcl/84h/Xe8nSgPl6zRIpASirbuH
frSMbQT6JqVx6h/sykBCxcbEMtGDkeO4QNIFzfocsZgZ+4SnaVJNVh59ceh3pFr9
2AN2bkeXAAwj4Rm8bpLsRm7bawmDeradCskYe9E1gZDHTwz57jgw3ykLzoT04wHK
DhRXaZ4m5p11xsQEUtjpZEp433qBF602+ndDsl1qsk6OUBMqGMaF7GELLZ8GZY7v
NEuCq8d7gJ3AG1EOMbxvQXlxueI3FkbX+ptBLTjU3+IeIdia4LyZqrmW6LMAM7hK
6Xm+6RY0lnf95oZhqKA71hLocwCVm9IVnEqdfgnOHPyJ6NsCE2MLGu8B47fZKfJ/
XIPlsVY1uRBeQ2wEXsnseDy1DSCWEU4AcnBhzyjIZFcGuaCCph3RPN4Z2skyAWbX
SuiYSYWL+HOFzIjhkAVLg4NAVLWu2GykJSYvt0WoIiBf/L9OUaiCkJgdpWa1Qfun
S4DLjjMJa0/K9xhW6vVO
=l8vH
-----END PGP SIGNATURE-----
Merge tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
Board specific changes for omap.
Note that these are based on omap-pm-regulator-for-v3.5 as
both branches are adding twl regulators.
By Paul Gortmaker (8) and others
via Linus Torvalds (38) and others
* tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies
OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies
OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration
ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bit
Add MSUB support for the LogicPD OMAP3530 DevKits
ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer
ARM: OMAP2+: craneboard: register emac device
ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codec
ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codec
ARM: OMAP: devices: Register platform devices for HDMI audio
ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memory
ARM: OMAP2+: nand: Make board_onenand_init() visible to board code
ARM: OMAP3: cm-t35: add support for power off
ARM: OMAP: WiLink platform data for the PandaBoard
ARM: OMAP2PLUS: Enable HIGHMEM
ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx support
Signed-off-by: Olof Johansson <olof@lixom.net>
These supplies going to be needed for the twl6040 driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These supplies going to be needed for the twl6040 driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
V1V8 supply from twl6030 commonly used as VIO for the machine.
V2V1 is adviced to supply the twl6040, and also to feed the twl6030's
VCXIO_IN, and VDAC_IN inputs.
Create the common regulator configurations for these regulators:
Make the V2V1 as supply_regulator for VCXIO, VDAC.
Add twl6040 (1-004b) as consumer for V1V8, and V2V1.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated for the pm regulator changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
On Beagleboard-xM (all revisions) only MMC1_DAT0-MMC1_DAT3 are wired up.
Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for the OMAP3 MUSB OTG controller to the LogicPD
OMAP3530 SOM-LV[1] and Torpedo[2] DevKits
[1] - www.logicpd.com/products/system-on-modules/omap35x-som-lv/
[2] - www.logicpd.com/products/system-on-modules/omap35x-torpedo-som/
Signed-off-by: Ashwin Bihari <ashwin.bihari@logicpd.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds the required am35xx_emac_init() call to the craneboard init
function.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add platform device registratation for HDMI audio codec. This is to
be able to transmit audio through the HDMI output featured in Pandaboard
and PandaboardES boards.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add platform device registratation for HDMI audio codec. This is to
be able to transmit audio through the HDMI output featured in SDP4430
and Blaze boards.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add platform registration for the devices HDMI audio support. The
omap-hdmi-audio-dai platform device is to be used by the ASoC HDMI
CPU DAI driver. The omap-hdmi-audio platform device is to be used
by the ASoC HDMI machine driver that links together the ASOC CPU DAI,
ASoC plaform and ASoC codec drivers.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
IGEP-based boards can have two different flash memories, a OneNAND or
a NAND device. The boot configuration pins (sys_boot) are used to
specify which memory is available.
Also, this patch removes unnecesary code for registering the OneNAND.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
[tony@atomide.com: fixed up a minor checkpatch warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
board_onenand_init() and board_nand_init() initialization functions are
used to initialize OneNAND and NAND memories respectively. But only
board_nand_init() was visible to be used from board code. This patch makes
possible to initialize a OneNAND flash memory within platform code.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the power off feature of the TPS65930 on-board PMIC.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The "uim" deamon requires sysfs entries that are filled in using
this platform data.
Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
HIGMEM support in kernel is quite mature now and we have boards
like ZOOM, PANDA, SDP where 1 GB memories are installed. With
HIGHMEM disabled not all of the 1GB of RAM (only ~700MB) can be
accessed. Hence, enable HIGMEM to make use of the entire memory.
On the boards which doesn't have more than 768 MB memory, all
the memory is directly mapped in "lowmem" and highmem isn't
exercised. Hence, there should be no impact by enabling HIGHMEM
for boards that do not need it.
Tested on OMAP4460 Panda-ES.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Boards like beagle and panda use ehci based smsc95xx lan chips
one has to manually enable these supports to get nfs working
on these boards. So keep these support enable by default.
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
By Paul Parsons (5) and others
via Haojian Zhuang
* 'board-specific' of git://github.com/hzhuang1/linux:
pcmcia: add driver for hx4700
ARM: pxa: Add standard UART to hx4700_pin_config[]
ARM: mmp: add usb host support for aspen
ARM: mmp: add usb host support for PXA168
ARM: mmp: add usb device support for ttc dkb
ARM: mmp: add usb device support for PXA910
ARM: pxa: hx4700: Add PCMCIA/CF support
ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup source
ARM: pxa: hx4700: Initialize DS1WM clock_rate
ARM: pxa: mioa701 add camera output enable gpio
ARM: pxa: use ioremap to access CPLD
Signed-off-by: Olof Johansson <olof@lixom.net>
this makes the mbimxsd51 board naming consistant with others
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rev1 were shipped with silicon 2.0, rev2 with silicon 3.0
so we are using the silicon version to know the PCB revision
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this board is not publicly available and is replaced by cpuimx51sd
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
