Network header is set with offset ETH_HLEN but it is not true for VLAN
(multiple-)tagged and results in checksum issues in lower devices.
v2: leave skb->protocol untouched (thx Vlad), comment added
v3: moved after skb_probe_transport_header() call (thx Toshiaki)
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was reported that update_suffix was taking a long time on systems where
a large number of leaves were attached to a single node. As it turns out
fib_table_flush was calling update_suffix for each leaf that didn't have all
of the aliases stripped from it. As a result, on this large node removing
one leaf would result in us calling update_suffix for every other leaf on
the node.
The fix is to just remove the calls to leaf_pull_suffix since they are
redundant as we already have a call in resize that will go through and
update the suffix length for the node before we exit out of
fib_table_flush or fib_table_flush_external.
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an architecture defines readl/writel using CPP macros, we
get the following kinds of build failure:
> > > drivers/net/ethernet/cadence/macb.c:164:1: error: macro "writel"
> > > passed 3 arguments, but takes just 2
> macb_or_gem_writel(bp, SA1B, bottom);
> ^
Rename the methods so that this doesn't happen.
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this i2c instance for missing cell-index nodes would fail, fix
it by adding correct cell-index.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
This change adds DT support for GSBI6 and muxes the gpio pins
as UART lines. Also defines a alias for serial port on these lines.
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
[Srinivas Kandagatla]: fix pinctrl location and rename alias correctly
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
This patch adds pmic gpio node to the device tree, this node is
necessary for devices like wlan to control reset gpio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
BCD driver now reads correct register to fetch HW
dequeue pointer address.
f_uac2 got a fix for bInterval calculation.
Both f_hid and f_printer can now correctly limit number
of instances when used through configfs.
Signed-off-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pjHS
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.2-rc5
BCD driver now reads correct register to fetch HW
dequeue pointer address.
f_uac2 got a fix for bInterval calculation.
Both f_hid and f_printer can now correctly limit number
of instances when used through configfs.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
this patch is againest v4.2-rc1, by doing:
$ make ARCH=arm prima2_defconfig
$ make ARCH=arm savedefconfig
$ cp defconfig arch/arm/configs/prima2_defconfig
Signed-off-by: Barry Song <Baohua.Song@csr.com>
correct place should be at ci core driver's module_init, and
only be called one time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVtd37AAoJEEhZKYFQ1nG7hqsIAMVqiEuK7MK2lz+GsSsifP0u
bv1Bo+D7D2vOltzwz49Kis+gcUxX01SKHXH9yqAjR9YQPBNaxwC7CM7tm1mH0lWL
9NKNNdkjS0O9clfPiWm2qf3yQyBLQqTLQ3qXHzw2l3ryxyRyEoTbK+70XRffUpDy
/5spaIi1z2bGSPrWySF7I/o7YXR/SdkKkVIkSuHXIkq/KB57RjH3XCOdvacBfawt
d2sIyoEhku0DcsISnqvrPTmEdyCrNzLrfyjcvImFDypA8PtjAVT1/iVoRKVzvBeK
9EQRwJfkuJ7AeR+g29ixQFqBfvrIQN2R/mJ8caH0cf0gjXekCJhfvy6bf8jYr38=
=WQzl
-----END PGP SIGNATURE-----
Merge tag 'usb-ci-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
It is a bug fix that using ehci_init_driver at wrong place, the
correct place should be at ci core driver's module_init, and
only be called one time.
This reverts commit e95044ba4f.
Commit e95044ba4f ("tty: serial: imx.c: Reset UART before activating
interrupts") terribly messes up with the console on mx6 boards, so
let's revert it.
Reported-by: kernelci.org bot <bot@kernelci.org>
Cc: David Jander <david@protonic.nl>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Other serial driver work wants to build on patches now in 4.2-rc4 so
merge the branch so this can properly happen.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad writes:
"There are three bugs that have been found in the xen-blkfront (and
backend). Two of them have the stable tree CC-ed. They have been found
where an guest is migrating to a host that is missing
'feature-persistent' support (from one that has it enabled). We end up
hitting an BUG() in the driver code."
lib/list_sort.c defines a 'struct debug_el', where "el" is assumedly a
a contraction of "element". This conflicts with 'enum debug_el' in our
asm/debug-monitors.h header file, where "el" stands for Exception Level.
The result is build failure when targetting allmodconfig, so rename our
enum to 'dbg_active_el' to be slightly more explicit about what it is.
Signed-off-by: Will Deacon <will.deacon@arm.com>
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lets call remove_proc_entry() in the error path only if we have
successfully created "misc" in procfs.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for CONFIG_PROC_FS is not required as the check is being done
in proc_fs.h and incase CONFIG_PROC_FS is not defined then proc_create()
is defined as NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not needed after booting, this patch moves the
free_initrd_mem() function to the __init section.
This patch also make keep_initrd __initdata, to reduce kernel
size.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
At boot, the UTF-16 UEFI vendor string is copied from the system
table into a char array with a size of 100 bytes. However, this
size of 100 bytes is also used for memremapping() the source,
which may not be sufficient if the vendor string exceeds 50
UTF-16 characters, and the placement of the vendor string inside
a 4 KB page happens to leave the end unmapped.
So use the correct '100 * sizeof(efi_char16_t)' for the size of
the mapping.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: f84d02755f ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
New features:
- Introduce PERF_RECORD_SWITCH(_CPU_WIDE) and use it in 'record' to
ask for context switches, allowing non priviledged tasks to know
when they are switched in and out, which wasn't possible with
the other context switch tracepoint and software events, see the
patch description for a comprehensive justification (Adrian Hunter)
- Stop collecting /proc/kallsyms in perf.data files, saving about
4.5MB on a typical x86-64 system, use the the symbol resolution
routines used in all the other tools (report, top, etc) now that
we can ask libtraceevent to use perf's symbol resolution code.
(Arnaldo Carvalho de Melo)
User visible fixes:
- Expose perf's symbol resolver to libtraceecent, so that its plugins can
resolve tracepoint fields to kernel functions, like the 'function' field
in the "timer:hrtimer_start tracepoint" (Arnaldo Carvalho de Melo)
Infrastructure:
- Map propagation of thread and cpu maps improvements, prep work for
'perf stat' new features (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVsZsBAAoJENZQFvNTUqpA1UgP/RgFnXgL3cgUPsMMVL040/UV
3fAVWJdjbXoNZHDPrUd7rphnvQYG4wEqcWB7akaIiaebOjmlKGJZZTNafK0WpbBT
xAL2h2FqXte0SIQUb5VlVwGeP4mUOMVkSs1gFEPd24WF+2bsVxLhE2pCOa18yB1J
4d/sP/haAsaxmNG7P6I53WWWn45UPuxgU66cBTIXIdYGUVg65i/p8orbaZxc3Vvg
nIQA5VWuUoxo+TN83oCRlt5JNOl5GadHdjDdrqVGvh40IIZ+2W3ViGQAAxrJdvHv
0032YrEZiU4xS0heMh5Gvh+Df1dmRfpKJrpdrqSzBNbVESNPE7iCDPgI/8xn5Rif
OK7IQtjfHz5DZLSQ8AkNOq619aVmL4FLJeiVK8TahxvGIW/+itlAmn6EbzRXRDZr
qM+zmijvzwWqGsP1JJaRSkKDbF87Nk360AQ5M7aYtMRtWDA7G29Ms6m1IJa207YZ
jEY1tjMTiPiGOO4cgb6V/nDulcgRgko60bivsDAUxM8SvxGuW3/79Y8l5LxifuVR
sxgY+ar0VuK2pg23h4mmJkhsIHe8AjF1MJ6/W3SgXJSX1+i8pfP2PHE36HtkJNmT
cE+YtRRevKcTc+TpclwYiw/SadvAPr1/RsLdYnIvG/1BjgpZ23V+iNQEmS2OUqgj
LkjQvqCxsB7IvxS9JSyF
=a9+i
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Introduce PERF_RECORD_SWITCH(_CPU_WIDE) and use it in 'record' to
ask for context switches, allowing non priviledged tasks to know
when they are switched in and out, which wasn't possible with
the other context switch tracepoint and software events, see the
patch description for a comprehensive justification (Adrian Hunter)
- Stop collecting /proc/kallsyms in perf.data files, saving about
4.5MB on a typical x86-64 system, use the the symbol resolution
routines used in all the other tools (report, top, etc) now that
we can ask libtraceevent to use perf's symbol resolution code.
(Arnaldo Carvalho de Melo)
User visible fixes:
- Expose perf's symbol resolver to libtraceevent, so that its plugins can
resolve tracepoint fields to kernel functions, like the 'function' field
in the "timer:hrtimer_start tracepoint" (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Map propagation of thread and cpu maps improvements, prep work for
'perf stat' new features (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpuid_feature_extract_field takes care of the fiddly ID register
field sign-extension, so use that instead of rolling our own version.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Rework the cpufeature detection to support ISAR0 and use that for
detecting the presence of LSE atomics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
There is a predefined maximum number of printer instances, currently 4.
A chrdev region is allocated accordingly, but with configfs the user
can create as many printer function directories as they like. To make the
number of printer instances consistent with the number of allocated
minors, the limit is enforced at directory creation time.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
There is a predefined maximum number of hid instances, currently 4.
A chrdev region is allocated accordingly, but with configfs the user
can create as many hid function directories as they like. To make
the number of hid instances consistent with the number of allocated minors,
the limit is enforced at directory creation time.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The p_interval should be less if the 'bInterval' at the descriptor
is larger, eg, if 'bInterval' is 5 for HS, the p_interval should be
8000 / 16 = 500.
It fixes the patch 9bb87f1689 ("usb: gadget: f_uac2: send
reasonably sized packets")
Cc: <stable@vger.kernel.org> # v3.18+
Fixes: 9bb87f1689 ("usb: gadget: f_uac2: send reasonably sized packets")
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The networking layer does not reliably report the distinction between
a non-block write failing because:
1/ the queue is too full already and
2/ a memory allocation attempt failed.
The distinction is important because in the first case it is
appropriate to retry as soon as the socket reports that it is
writable, and in the second case a small delay is required as the
socket will most likely report as writable but kmalloc could still
fail.
sk_stream_wait_memory() exhibits this distinction nicely, setting
'vm_wait' if a small wait is needed. However in the non-blocking case
it always returns -EAGAIN no matter the cause of the failure. This
-EAGAIN call get all the way to sunrpc.
The sunrpc layer expects EAGAIN to indicate the first cause, and
ENOBUFS to indicate the second. Various documentation suggests that
this is not unreasonable, but does not guarantee the desired error
codes.
The result of getting -EAGAIN when -ENOBUFS is expected is that the
send is tried again in a tight loop and soft lockups are reported.
so: add tests after calls to xs_sendpages() to translate -EAGAIN into
-ENOBUFS if the socket is writable. This cannot happen inside
xs_sendpages() as the test for "is socket writable" is different
between TCP and UDP.
With this change, the tight loop retrying xs_sendpages() becomes a
loop which only retries every 250ms, and so will not trigger a
soft-lockup warning.
It is possible that the write did fail because the queue was too full
and by the time xs_sendpages() completed, the queue was writable
again. In this case an extra 250ms delay is inserted that isn't
really needed. This circumstance suggests a degree of congestion so a
delay is not necessarily a bad thing, and it can only cause a single
250ms delay, not a series of them.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Handle NFS-specific llseek errors instead of letting them leak out to
userspace.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
ep_dequeue() in bdc_ep.c was capturing the hw dequeue pointer
incorrectly by reading the wrong register for the upper 32 bits.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
callers of vhost_kvzalloc() expect the same behaviour on
allocation error as from kmalloc/vmalloc i.e. NULL return
value. So just return vzmalloc() returned value instead of
returning ERR_PTR(-ENOMEM)
Fixes: 4de7255f7d ("vhost: extend memory regions allocation to vmalloc")
Spotted-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While reviewing vhost log code, I found out that log_file is never
set. Note: I haven't tested the change (QEMU doesn't use LOG_FD yet).
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ARMv8 CPUs do not support any of the v8.1 features, so group them
together in Kconfig to make it clear that they're part of 8.1 and not
relevant to older cores.
Signed-off-by: Will Deacon <will.deacon@arm.com>
It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Recoalescing does not affect whether or not we've already sent off
I/O, and doing so means that we end up sending a bunch of synchronous
for cases where we actually need to be using unstable writes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the function exits early, then we must put those requests that were
not processed back onto the &mirror->pg_list so they can be cleaned up
by nfs_pgio_error().
Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The change removes redundant sysfs binary file boundary check while
reading eeprom content from userspace, the check is done on caller
side in fs/sysfs/file.c, if binary attribute size is not zero.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The change removes redundant calculation of left space on eeprom while
reading or writing "param_eeprom" or "user_eeprom", the checks are not
needed, since this task is done on caller side in fs/sysfs/file.c
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
We implement an optimised cmpxchg_local macro, so let the kernel know.
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The change removes redundant sysfs binary file boundary checks while
reading or writing "param_eeprom" or "user_eeprom", the checks are not
needed, since this task is done on caller side in fs/sysfs/file.c
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
If we attempt to atomic64_dec_if_positive on INT_MIN, we will underflow
and incorrectly decide that the original parameter was positive.
This patches fixes the broken condition code so that we handle this
corner case correctly.
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We don't need duplicate cmpxchg implementations, so use cmpxchg to
implement atomic{,64}_cmpxchg, like we do for xchg already.
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The cost of changing a cacheline from shared to exclusive state can be
significant, especially when this is triggered by an exclusive store,
since it may result in having to retry the transaction.
This patch makes use of prfm to prefetch cachelines for write prior to
ldxr/stxr loops when using the ll/sc atomic routines.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
