[ Upstream commit 96feb73def ]
When authenc is invoked with MAY_BACKLOG, it needs to pass EINPROGRESS
notifications back up to the caller when the underlying algorithm
returns EBUSY synchronously.
However, if the EBUSY comes from the second part of an authenc call,
i.e., it is asynchronous, both the EBUSY and the subsequent EINPROGRESS
notification must not be passed to the caller.
Implement this by passing a mask to the function that starts the
second half of authenc and using it to determine whether EBUSY
and EINPROGRESS should be passed to the caller.
This was a deficiency in the original implementation of authenc
because it was not expected to be used with MAY_BACKLOG.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 180ce7e810 ("crypto: authenc - Add EINPROGRESS check")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e3e330c07 ]
The IRQCHIP_PLATFORM_DRIVER macros can be used to convert OF irqchip
drivers to platform drivers but currently reuse the OF init callback
prototype that only takes OF nodes as arguments. This forces drivers to
do reverse lookups of their struct devices during probe if they need
them for things like dev_printk() and device managed resources.
Half of the drivers doing reverse lookups also currently fail to release
the additional reference taken during the lookup, while other drivers
have had the reference leak plugged in various ways (e.g. using
non-intuitive cleanup constructs which still confuse static checkers).
Switch to using a probe callback that takes a platform device as its
first argument to simplify drivers and plug the remaining (mostly
benign) reference leaks.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3540d99c03 ]
Drop some unnecessary brackets in platform_irqchip_probe() mistakenly
left by commit 9322d1915f ("irqchip: Plug a OF node reference leak in
platform_irqchip_probe()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 1e3e330c07 ("irqchip: Pass platform device to platform drivers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b685058ca ]
Platform drivers can be probed after their init sections have been
discarded so the probe callback must not live in init.
Fixes: f20cc9b00c ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f798bdb9aa ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: e4e5350361 ("irqchip: Add StarFive external interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b338fbb2b ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: d011c022ef ("irqchip/renesas-rzg2l: Add support for RZ/Five SoC")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64acfd8e68 ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbe1775924 ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 51d9db5c8f ("irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc0c5beab ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 3ac268d5ed ("irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9db5332ca ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: c057c799e3 ("irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8452d1d59 ]
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0435bcc4e5 ]
The init callback must not decrement the reference count of the provided
irqchip OF node.
This should not cause any trouble currently, but if the driver ever
starts probe deferring it could lead to warnings about reference
underflow and saturation.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79104becf4 ]
If a task yields, the scheduler may decide to pick it again. The task in
turn may decide to yield immediately or shortly after, leading to a tight
loop of yields.
If there's another runnable task as this point, the deadline will be
increased by the slice at each loop. This can cause the deadline to runaway
pretty quickly, and subsequent elevated run delays later on as the task
doesn't get picked again. The reason the scheduler can pick the same task
again and again despite its deadline increasing is because it may be the
only eligible task at that point.
Fix this by making the task forfeiting its remaining vruntime and pushing
the deadline one slice ahead. This implements yield behavior more
authentically.
We limit the forfeiting to eligible tasks. This is because core scheduling
prefers running ineligible tasks rather than force idling. As such, without
the condition, we can end up on a yield loop which makes the vruntime
increase rapidly, leading to anomalous run delays later down the line.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250401123622.584018-1-sieberf@amazon.com
Link: https://lore.kernel.org/r/20250911095113.203439-1-sieberf@amazon.com
Link: https://lore.kernel.org/r/20250916140228.452231-1-sieberf@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c5f229b13 ]
Currently, the TX and RX MCS rate configurations per peer are
reversed when sent to the firmware. As a result, RX MCS rates
are configured for TX, and vice versa. This commit rectifies
the configuration to match what the firmware expects.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-3-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c21b32c2c ]
While associating, firmware needs the peer's receive capability
to calculate its own VHT transmit MCS. Currently, the host
sends this information via mcs->rx_mcs_set field, but firmware
actually reads it from mcs->tx_mcs_set field. This mismatch is
incorrect.
This issue has not caused failures so far because most peers
advertise identical TX and RX capabilities. Fix this by
assigning the value to tx_mcs_set as expected.
Additionally, the rate control mask is intended to limit our
transmit MCS, so it should also apply to the peer's receive
capability. Update the logic accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-2-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36f9edbb9d ]
Currently, packets received on the REO exception ring from
unassociated peers are of MSDU buffer type, while the driver expects
link descriptor type packets. These packets are not parsed further due
to a return check on packet type in ath12k_hal_desc_reo_parse_err(),
but the associated skb is not freed. This may lead to kernel
crashes and buffer leaks.
Hence to fix, update the RX error handler to explicitly drop
MSDU buffer type packets received on the REO exception ring.
This prevents further processing of invalid packets and ensures
stability in the RX error handling path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250930091551.3305312-2-sarika.sharma@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 596b911644 ]
Hardware target implements an address space larger than that PCI BAR can
map. In order to be able to access the whole target address space, the BAR
space is split into 4 segments, of which the last 3, called windows, can
be dynamically mapped to the desired area. This is achieved by updating
window register with appropriate window value. Currently each time when
accessing a register that beyond ATH11K_PCI_WINDOW_START, host calculates
the window value and caches it after window update, this way next time
when accessing a register falling in the same window, host knows that the
window is already good hence no additional update needed.
However this mechanism breaks after global reset is triggered in
ath11k_pci_soc_global_reset(), because with global reset hardware resets
window register hence the window is not properly mapped any more. Current
host does nothing about this, as a result a subsequent register access may
not work as expected if it falls in a window same as before.
Although there is no obvious issue seen now, better to fix it to avoid
future problem. The fix is done by restoring the window register after
global reset.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251014-ath11k-reset-window-cache-v1-1-b85271b111dd@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f35a07a484 ]
Currently, ath10k has a recovery check logic. It will wait for the
last recovery to finish by wait_for_completion_timeout();
But in SDIO scenarios, the recovery function may be invoked from
interrupt context, where long blocking waits are undesirable and can
lead to system instability.
Additionally, Linux’s ordered workqueue processes one task at a time.
If a previous recovery is still queued or executing, new triggers are
ignored. This prevents accurate tracking of consecutive failures and
delays transition to the WEDGED state.
To address this, move the recovery check logic into a different
workqueue.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
Fixes: c256a94d1b ("wifi: ath10k: shutdown driver when hardware is unreliable")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251014110757.155-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87990025b8 ]
Because nova-core depends on CONFIG_64BIT and a raw DmaAddress is
always a u64, we can remove the now actually useless conversion.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: reword commit as suggested by John.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-1-dakr@kernel.org>
Stable-dep-of: f7a33a67c5 ("gpu: nova-core: gsp: do not unwrap() SGEntry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7b76f607a ]
The term list when adding an event to a PMU is expected to have the
event name for the alias lookup. Also, set found_supported so that
-EINVAL isn't returned.
Fixes: 62593394f6 ("perf parse-events: Legacy cache names on all
PMUs and lower priority")
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63c7870fab ]
Fix a race that can occur when multiple jobs submit the same dmabuf.
This could cause the sg_table to be mapped twice, leading to undefined
behavior.
Fixes: e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251014071725.3047287-1-karol.wachowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72567c630d ]
find_symbol_hole_containing() fails to find a symbol hole (aka stripped
weak symbol) if its section has no symbols before the hole. This breaks
weak symbol detection if -ffunction-sections is enabled.
Fix that by allowing the interval tree to contain section symbols, which
are always at offset zero for a given section.
Fixes a bunch of (-ffunction-sections) warnings like:
vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction
Fixes: 4adb236867 ("objtool: Ignore extra-symbol code")
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be8374a5ba ]
The objtool command line 'objtool --hacks=jump_label foo.o' on its own
should be expected to rewrite jump labels to NOPs. This means the
add_special_section_alts() code path needs to run when only this option
is provided.
This is mainly relevant in certain debugging situations, but could
potentially also fix kernel builds in which objtool is run with
--hacks=jump_label but without --orc, --stackval, --uaccess, or
--hacks=noinstr.
Fixes: de6fbcedf5 ("objtool: Read special sections with alts only when specific options are selected")
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80405a34e1 ]
Proper cleanup should be done when rproc_add() fails by invoking both
pm_runtime_disable() and pm_runtime_put_noidle() to avoid leaving the
device in an inconsistent power state.
Fix it by adding pm_runtime_put_noidle() and pm_runtime_disable()
in the error path.
Also Update the remove() callback to use pm_runtime_put_noidle() instead of
pm_runtime_put(), to clearly indicate that only need to restore the usage
count.
Fixes: a876a3aacc ("remoteproc: imx_rproc: detect and attach to pre-booted remote cores")
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Hiago De Franco <hiago.franco@toradex.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250926-imx_rproc_v3-v3-1-4c0ec279cc5f@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aba7963544 ]
Currently, hidpp_send_message_sync() retries sending the message when the
device returns a busy error code, specifically HIDPP20_ERROR_BUSY, which
has a different meaning under RAP. This ends up being a problem because
this function is used for both FAP and RAP messages.
This issue is not noticeable on older receivers with unreachable devices
since they return HIDPP_ERROR_RESOURCE_ERROR (0x09), which is not equal to
HIDPP20_ERROR_BUSY (0x08).
However, newer receivers return HIDPP_ERROR_UNKNOWN_DEVICE (0x08) which
happens to equal to HIDPP20_ERROR_BUSY, causing unnecessary retries when
the device is not actually busy.
This is resolved by checking if the error response is FAP or RAP and
picking the respective ERROR_BUSY code.
Fixes: 60165ab774 ("HID: logitech-hidpp: rework one more time the retries attempts")
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a312acdcec ]
On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91401af6c ]
On R-Car V4H, the PCIEC controller DBI read would generate an SError in
case the controller reset is released by writing SRSTCLR register first,
and immediately afterward reading some PCIEC controller DBI register.
The issue triggers in rcar_gen4_pcie_additional_common_init() on
dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW), which on V4H is the first
read after reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc).
The reset controller which contains the SRSTCLR register and the PCIEC
controller which contains the DBI register share the same root access
bus, but the bus then splits into separate segments before reaching each
IP. Even if the SRSTCLR write access was posted on the bus before the
DBI read access, it seems the DBI read access may reach the PCIEC
controller before the SRSTCLR write completed, and trigger the SError.
Mitigate the issue by adding a dummy SRSTCLR read, which assures the
SRSTCLR write completes fully and is latched into the reset controller,
before the PCIEC DBI read access can occur.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250922162113.113223-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62abfd7bed ]
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page
583 Figure 9.3.1(a) Software Reset flow (A) as well as flow (B) / (C)
indicate after reset has been asserted by writing a matching reset bit
into register SRCR, it is mandatory to wait 1ms.
This 1ms delay is documented on R-Car V4H and V4M, it is currently
unclear whether S4 is affected as well. This patch does apply the extra
delay on R-Car S4 as well.
Fix the reset driver to respect the additional delay when toggling
resets. Drivers which use separate reset_control_(de)assert() must
assure matching delay in their driver code.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918030552.331389-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f3fc4f3f8 ]
Since commit 56305aa9b6 ("exec: Compute file based creds only once"), the
credentials to be applied to the process after execution are not calculated
anymore for each step of finding intermediate interpreters (including the
final binary), but only after the final binary to be executed without
interpreter has been found.
In particular, that means that the bprm_check_security LSM hook will not
see the updated cred->e[ug]id for the intermediate and for the final binary
to be executed, since the function doing this task has been moved from
prepare_binprm(), which calls the bprm_check_security hook, to
bprm_creds_from_file().
This breaks the IMA expectation for the CREDS_CHECK hook, introduced with
commit d906c10d8a ("IMA: Support using new creds in appraisal policy"),
which expects to evaluate "the credentials that will be committed when the
new process is started". This is clearly not the case for the CREDS_CHECK
IMA hook, which is attached to bprm_check_security.
This issue does not affect systems which load a policy with the BPRM_CHECK
hook with no other criteria, as is the case with the built-in "tcb" and/or
"appraise_tcb" IMA policies. The "tcb" built-in policy measures all
executions regardless of the new credentials, and the "appraise_tcb" policy
is written in terms of the file owner, rather than IMA hooks.
However, it does affect systems without a BPRM_CHECK policy rule or with a
BPRM_CHECK policy rule that does not include what CREDS_CHECK evaluates. As
an extreme example, taking a standalone rule like:
measure func=CREDS_CHECK euid=0
This will not measure for example sudo (because CREDS_CHECK still sees the
bprm->cred->euid set to the regular user UID), but only the subsequent
commands after the euid was applied to the children.
Make set[ug]id programs measured/appraised again by splitting
ima_bprm_check() in two separate hook implementations (CREDS_CHECK now
being implemented by ima_creds_check()), and by attaching CREDS_CHECK to
the bprm_creds_from_file LSM hook.
The limitation of this approach is that CREDS_CHECK will not be invoked
anymore for the intermediate interpreters, like it was before, but only for
the final binary. This limitation can be removed only by reverting commit
56305aa9b6 ("exec: Compute file based creds only once").
Link: https://github.com/linux-integrity/linux/issues/3
Fixes: 56305aa9b6 ("exec: Compute file based creds only once")
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e73fda2dcb ]
Mark the gpio/egpio as GPIO specific pin functions, othewise
the pin muxing generic framework will complain about the gpio
being already requested by a different owner.
Fixes: 87ebcd8bae ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e7b53606 ]
The platform specific configuration is already passed on to the generic
msm probe. So it's useless to exist in the match table next to the
compatible. So drop it from match table.
Fixes: 87ebcd8bae ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a67955de1 ]
The bperf BPF counter code doesn't handle "any"(-1) CPU events, always
wanting to aggregate a count against a CPU, which avoids the need for
atomics so let's not change that. Force evsels used for BPF counters
to require a CPU when not in system-wide mode so that the "any"(-1)
value isn't used during map propagation and evsel's CPU map matches
that of the PMU.
Fixes: b91917c0c6 ("perf bpf_counter: Fix handling of cpumap fixing hybrid")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5570ad1423 ]
In cdc_parse_cdc_header(), the check for the USB_CDC_MBIM_EXTENDED_TYPE
descriptor was using 'break' upon detecting an invalid length.
This was incorrect because 'break' only exits the switch statement,
causing the code to fall through to cnt++, thus incorrectly
incrementing the count of parsed descriptors for a descriptor that was
actually invalid and being discarded.
This patch changes 'break' to 'goto next_desc;' to ensure that the
logic skips the counter increment and correctly proceeds to the next
descriptor in the buffer. This maintains an accurate count of only
the successfully parsed descriptors.
Fixes: e4c6fb7794 ("usbnet: move the CDC parser into USB core")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20250928185611.764589-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 812f223fe9 ]
wstatus is allowed to be NULL. Avoid a segmentation fault in this case.
Fixes: 0c89abf5ab ("tools/nolibc: implement waitpid() in terms of waitid()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f8d411729 ]
Fix handling maps with no BTF and non-constant offsets for the bpf_wq.
This de-duplicates logic with other internal structs (task_work, timer),
keeps error reporting consistent, and makes future changes to the layout
handling centralized.
Fixes: d940c9b94d ("bpf: add support for KF_ARG_PTR_TO_WORKQUEUE")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251010164606.147298-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 469d638d15 ]
Fix the BPF verifier to correctly determine the sleepable context of
async callbacks based on the async primitive type rather than the arming
program's context.
The bug is in in_sleepable() which uses OR logic to check if the current
execution context is sleepable. When a sleepable program arms a timer
callback, the callback's state correctly has in_sleepable=false, but
in_sleepable() would still return true due to env->prog->sleepable being
true. This incorrectly allows sleepable helpers like
bpf_copy_from_user() inside timer callbacks when armed from sleepable
programs, even though timer callbacks always execute in non-sleepable
context.
Fix in_sleepable() to rely solely on env->cur_state->in_sleepable, and
initialize state->in_sleepable to env->prog->sleepable in
do_check_common() for the main program entry. This ensures the sleepable
context is properly tracked per verification state rather than being
overridden by the program's sleepability.
The env->cur_state NULL check in in_sleepable() was only needed for
do_misc_fixups() which runs after verification when env->cur_state is
set to NULL. Update do_misc_fixups() to use env->prog->sleepable
directly for the storage_get_function check, and remove the redundant
NULL check from in_sleepable().
Introduce is_async_cb_sleepable() helper to explicitly determine async
callback sleepability based on the primitive type:
- bpf_timer callbacks are never sleepable
- bpf_wq and bpf_task_work callbacks are always sleepable
Add verifier_bug() check to catch unhandled async callback types,
ensuring future additions cannot be silently mishandled. Move the
is_task_work_add_kfunc() forward declaration to the top alongside other
callback-related helpers. We update push_async_cb() to adjust to the new
changes.
At the same time, while simplifying in_sleepable(), we notice a problem
in do_misc_fixups. Fix storage_get helpers to use GFP_ATOMIC when called
from non-sleepable contexts within sleepable programs, such as bpf_timer
callbacks.
Currently, the check in do_misc_fixups assumes that env->prog->sleepable,
previously in_sleepable(env) which only resolved to this check before
last commit, holds across the program's execution, but that is not true.
Instead, the func_atomic bit must be set whenever we see the function
being called in an atomic context. Previously, this is being done when
the helper is invoked in atomic contexts in sleepable programs, we can
simply just set the value to true without doing an in_sleepable() check.
We must also do a standalone in_sleepable() check to handle cases where
the async callback itself is armed from a sleepable program, but is
itself non-sleepable (e.g., timer callback) and invokes such a helper,
thus needing the func_atomic bit to be true for the said call.
Adjust do_misc_fixups() to drop any checks regarding sleepable nature of
the program, and just depend on the func_atomic bit to decide which GFP
flag to pass.
Fixes: 81f1d7a583 ("bpf: wq: add bpf_wq_set_callback_impl")
Fixes: b00fa38a9c ("bpf: Enable non-atomic allocations in local storage")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251007220349.3852807-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa1c2b073a ]
The pcode MAILBOX STATUS register PARAM2 field expects DCT active
percent in U1.7 value format. Convert percentage value to this
format before writing to the register.
Fixes: a19bffb10c ("accel/ivpu: Implement DCT handling")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251001104322.1249896-1-karol.wachowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b694b405a ]
Don't add BO to the vdev->bo_list in ivpu_gem_create_object().
When failure happens inside drm_gem_shmem_create(), the BO is not
fully created and ivpu_gem_bo_free() callback will not be called
causing a deleted BO to be left on the list.
Fixes: 8d88e4cdce ("accel/ivpu: Use GEM shmem helper for all buffers")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145114.1446283-1-maciej.falkowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c0891cd6 ]
Ensure that imported buffers are properly mapped and unmapped in
the same way as regular buffers to properly handle buffers during
device's bind and unbind operations to prevent resource leaks and
inconsistent buffer states.
Imported buffers are now dma_mapped before submission and
dma_unmapped in ivpu_bo_unbind(), guaranteeing they are unmapped
when the device is unbound.
Add also imported buffers to vdev->bo_list for consistent unmapping
on device unbind. The bo->ctx_id is set in open() so imported
buffers have a valid context ID.
Debug logs have been updated to match the new code structure.
The function ivpu_bo_pin() has been renamed to ivpu_bo_bind()
to better reflect its purpose, and unbind tests have been refactored
for improved coverage and clarity.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250925145059.1446243-1-maciej.falkowski@linux.intel.com
Stable-dep-of: 8b694b405a ("accel/ivpu: Fix page fault in ivpu_bo_unbind_all_bos_from_context()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39144b611e ]
Don't clear all mode flags. We only want to maek sure we use HS mode
during unprepare.
Fixes: c7f66d32dd ("drm/panel: add support for rm69299 visionox panel")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-2-a7729911afb9@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d298062312 ]
Make the clock frequency match what the sdm845 downstream kernel
uses. Otherwise the panel stays black.
Fixes: 783334f366 ("drm/panel: visionox-rm69299: support the variant found in the SHIFT6mq")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-1-a7729911afb9@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f6c632857 ]
Previously, aborting work could return early after engine reset or resume
failure, skipping the necessary runtime_put cleanup leaving the device
with incorrect reference count breaking runtime power management state.
Replace early returns with goto statements to ensure runtime_put is always
executed.
Fixes: a47e36dc5d ("accel/ivpu: Trigger device recovery on engine reset/resume failure")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://lore.kernel.org/r/20250916084809.850073-1-karol.wachowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 457f4393d0 ]
In amdxdna_gem_obj_vmap(), calling dma_buf_vmap() triggers a kernel
warning if LOCKDEP is enabled. So for imported object, use
dma_buf_vmap_unlocked(). Then, use drm_gem_vmap() for other objects.
The similar change applies to vunmap code.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250916174842.234709-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e16c8bf9a ]
The unpublished smatch static checker reported a warning.
drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array()
warn: potential user controlled sizeof overflow
'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)'
Even this will not cause a real issue, it is better to put a reasonable
limitation for element_size and num_element. Add condition to make sure
the input element_size <= 4K and num_element <= 1K.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aL56ZCLyl3tLQM1e@stanley.mountain/
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250909154531.3469979-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d393267c ]
Fix race condition between host1x_syncpt_alloc()
and host1x_syncpt_put() by using kref_put_mutex()
instead of kref_put() + manual mutex locking.
This ensures no thread can acquire the
syncpt_mutex after the refcount drops to zero
but before syncpt_release acquires it.
This prevents races where syncpoints could
be allocated while still being cleaned up
from a previous release.
Remove explicit mutex locking in syncpt_release
as kref_put_mutex() handles this atomically.
Signed-off-by: Mainak Sen <msen@nvidia.com>
Fixes: f5ba33fb96 ("gpu: host1x: Reserve VBLANK syncpoints at initialization")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250707-host1x-syncpt-race-fix-v1-1-28b0776e70bc@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 674e2b2479 ]
This command:
# echo foo/bar >/proc/$$/attr/smack/current
gives the task a label 'foo' w/o indication
that label does not match input.
Setting the label with lsm_set_self_attr() syscall
behaves identically.
This occures because:
1) smk_parse_smack() is used to convert input to a label
2) smk_parse_smack() takes only that part from the
beginning of the input that looks like a label.
3) `/' is prohibited in labels, so only "foo" is taken.
(2) is by design, because smk_parse_smack() is used
for parsing strings which are more than just a label.
Silent failure is not a good thing, and there are two
indicators that this was not done intentionally:
(size >= SMK_LONGLABEL) ~> invalid
clause at the beginning of the do_setattr() and the
"Returns the length of the smack label" claim
in the do_setattr() description.
So I fixed this by adding one tiny check:
the taken label length == input length.
Since input length is now strictly controlled,
I changed the two ways of setting label
smack_setselfattr(): lsm_set_self_attr() syscall
smack_setprocattr(): > /proc/.../current
to accommodate the divergence in
what they understand by "input length":
smack_setselfattr counts mandatory \0 into input length,
smack_setprocattr does not.
smack_setprocattr allows various trailers after label
Related changes:
* fixed description for smk_parse_smack
* allow unprivileged tasks validate label syntax.
* extract smk_parse_label_len() from smk_parse_smack()
so parsing may be done w/o string allocation.
* extract smk_import_valid_label() from smk_import_entry()
to avoid repeated parsing.
* smk_parse_smack(): scan null-terminated strings
for no more than SMK_LONGLABEL(256) characters
* smack_setselfattr(): require struct lsm_ctx . flags == 0
to reserve them for future.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
