commit 80f1a2c233 upstream.
The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.
However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().
Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.
Then, this may result in dirty VCMDQ registers, which can fail the VM.
Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.
Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reported-by: Bao Nguyen <ncqb@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1defcdc44 upstream.
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba205ac3d6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b1ecc9377 upstream.
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd29944165 ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3814
Fixes: dd29944165 ("drm/amdgpu: Rework retry fault removal")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ce8d536c8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd64f6e8c upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a6d6ed694)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9077d32a4b upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2918f958d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3eb46fbb60 upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd866 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b340ff216f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f810471c upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f16866bdb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4f433b14 upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e80b1d1aa1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7fbff9e76 upstream.
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 637fee3954)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 239d0ccf56 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53868dd877)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c764b7af15 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6194f60c70)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e535c23513 upstream.
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Cc: stable@vger.kernel.org # 3.10
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dedb897f11 upstream.
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb24 ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e4 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0581f6ab9 upstream.
Tyr needs `CONFIG_COMMON_CLK` to build:
error[E0432]: unresolved import `kernel::clk::Clk`
--> drivers/gpu/drm/tyr/driver.rs:3:5
|
3 | use kernel::clk::Clk;
| ^^^^^^^^^^^^^^^^ no `Clk` in `clk`
error[E0432]: unresolved import `kernel::clk::OptionalClk`
--> drivers/gpu/drm/tyr/driver.rs:4:5
|
4 | use kernel::clk::OptionalClk;
| ^^^^^^^^^^^^^^^^^^^^^^^^ no `OptionalClk` in `clk`
Thus add the dependency to fix it.
Fixes: cf4fd52e32 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs")
Cc: stable@vger.kernel.org
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260124160948.67508-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f15d52d3 upstream.
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Fixes: 53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: David Francis <David.Francis@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v6.18+
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260123141540.76540-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5157c328ed upstream.
Add a dependency edge from `compiler_builtins` to `core` to
`scripts/generate_rust_analyzer.py` to match `rust/Makefile`. This has
been incorrect since commit 8c4555ccc5 ("scripts: add
`generate_rust_analyzer.py`")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: 8c4555ccc5 ("scripts: add `generate_rust_analyzer.py`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-1-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e440bc5c19 upstream.
Currently, rust-analyzer fails to properly resolve structs annotated with
`#[pin_data]`. This prevents IDE features like "Go to Definition" from
working correctly for those structs.
Add the missing configuration to `generate_rust_analyzer.py` to ensure
the `pin-init` crate macros are handled correctly.
Signed-off-by: SeungJong Ha <engineer.jjhama@gmail.com>
Fixes: d7659acca7 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Tested-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20260123-fix-pin-init-crate-dependecies-v2-1-bb1c2500e54c@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac3c50b9a2 upstream.
Use `core_edition` for all sysroot crates rather than just core as all
were updated to edition 2024 in Rust 1.87.
Fixes: f4daa80d6b ("rust: compile libcore with edition 2024 for 1.87+")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-rust-analyzer-sysroot-v2-1-094aedc33208@kernel.org
[ Added `>`s to make the quote a single block. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b83ef9f7a upstream.
With nixpkgs's rustc, rust-src component is not bundled
with the compiler by default and is instead provided from
a separate store path, so this assumption does not hold.
The assertion assumes these paths are in the same location
which causes `make LLVM=1 rust-analyzer` to fail on NixOS.
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/565284250
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Fixes: fe99216357 ("rust: Support latest version of `rust-analyzer`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251224135343.32476-1-work@onurozkan.dev
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ff6e8700 upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: bb38f35b35 ("rust: implement `kernel::sync::Refcount`")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-5-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd36f6e2ab upstream.
For arm32, on a x86_64 builder, running the `rusttest` target yields:
error[E0080]: evaluation of constant value failed
--> rust/kernel/static_assert.rs:37:23
|
37 | const _: () = ::core::assert!($condition $(,$arg)?);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'assertion failed: size_of::<isize>() == size_of::<isize_atomic_repr>()', rust/kernel/sync/atomic/predefine.rs:68:1
|
::: rust/kernel/sync/atomic/predefine.rs:68:1
|
68 | static_assert!(size_of::<isize>() == size_of::<isize_atomic_repr>());
| -------------------------------------------------------------------- in this macro invocation
|
= note: this error originates in the macro `::core::assert` which comes from the expansion of the macro `static_assert` (in Nightly builds, run with -Z macro-backtrace for more info)
The reason is that `rusttest` runs on the host, so for e.g. a x86_64
builder `isize` is 64 bits but it is not a `CONFIG_64BIT` build.
Fix it by providing a stub for `rusttest` as usual.
Fixes: 84c6d36bca ("rust: sync: atomic: Add Atomic<{usize,isize}>")
Cc: stable@vger.kernel.org
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260123233432.22703-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09c3c9112d upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: cc84ef3b88 ("rust: bits: add support for bits/genmask macros")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-4-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 426ca15c7f upstream.
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260126152114.1211-1-jibin.zhang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a1968bd99 upstream.
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com
Fixes: 809bc86517 ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 057a6f2632 upstream.
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
[1] https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
[2] https://lkml.kernel.org/r/20250224211445.2663312-1-jane.chu@oracle.com
[3] https://lore.kernel.org/lkml/20251116013223.1557158-1-jiaqiyan@google.com/
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0f3c0845a upstream.
commit 8b47299a41 ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com
Fixes: 8b47299a41 ("mm, swap: mark swap address space ro and add context debug check")
Signed-off-by: robin.kuo <robin.kuo@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: andrew.yang <andrew.yang@mediatek.com>
Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Mathias Brugger <matthias.bgg@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a148a20401 upstream.
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com
Fixes: 18f41fa616 ("mm: memory-failure: bump memory failure stats to pglist_data")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 870ff19251 upstream.
Randomize the KFENCE freelist during pool initialization to make
allocation patterns less predictable. This is achieved by shuffling the
order in which metadata objects are added to the freelist using
get_random_u32_below().
Additionally, ensure the error path correctly calculates the address range
to be reset if initialization fails, as the address increment logic has
been moved to a separate loop.
Link: https://lkml.kernel.org/r/20260120161510.3289089-1-pimyn@google.com
Fixes: 0ce20dd840 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Pimyn Girgis <pimyn@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ernesto Martnez Garca <ernesto.martinezgarcia@tugraz.at>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e159150a9 upstream.
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing.
CC: stable@vger.kernel.org
CC: Jan Kara <jack@suse.cz>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd9e2f5b38 upstream.
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz
Fixes: a91befde35 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Bernd Schubert <bernd@bsbernd.com>
Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d5ecf21f upstream.
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad4 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb86 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef9e3a384 upstream.
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8467458dfa upstream.
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dccf46179d upstream.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b47d4eea3 upstream.
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
[ryabinin.a.a@gmail.com: move kasan_enabled() check, fix build]
Link: https://lkml.kernel.org/r/20260119144509.32767-1-ryabinin.a.a@gmail.com
Link: https://lkml.kernel.org/r/20260113191516.31015-1-ryabinin.a.a@gmail.com
Fixes: d699440f58 ("mm: fix vrealloc()'s KASAN poisoning logic")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: <joonki.min@samsung-slsi.corp-partner.google.com>
Closes: https://lkml.kernel.org/r/CANP3RGeuRW53vukDy7WDO3FiVgu34-xVJYkfpm08oLO3odYFrA@mail.gmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ca497be00 upstream.
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89 ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fcee2cfc4 upstream.
There is a race condition in nvmet_bio_done() that can cause a NULL
pointer dereference in blk_cgroup_bio_start():
1. nvmet_bio_done() is called when a bio completes
2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req)
3. The queue_response callback can re-queue and re-submit the same request
4. The re-submission reuses the same inline_bio from nvmet_req
5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete)
invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL
6. The re-submitted bio enters submit_bio_noacct_nocheck()
7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
RIP: 0010:blk_cgroup_bio_start+0x10/0xd0
Call Trace:
submit_bio_noacct_nocheck+0x44/0x250
nvmet_bdev_execute_rw+0x254/0x370 [nvmet]
process_one_work+0x193/0x3c0
worker_thread+0x281/0x3a0
Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put()
BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before
the request can be re-submitted, preventing the race condition.
Fixes: 190f4c2c86 ("nvmet: fix memory leak of bio integrity")
Cc: Dmitry Bogdanov <d.bogdanov@yadro.com>
Cc: stable@vger.kernel.org
Cc: Guangwu Zhang <guazhang@redhat.com>
Link: http://www.mail-archive.com/debian-kernel@lists.debian.org/msg146238.html
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b22ec1685 upstream.
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get().
Fixes: 2d82e6227e ("efi: vars: Move efivar caching layer into efivarfs")
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56bd3c0f74 upstream.
Earlier in the function, the ha->flt buffer is allocated with size
sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE but freed in the error
path with size SFP_DEV_SIZE.
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260112134326.55466-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a44bfed9df upstream.
When I enabled Rust compilation, I wanted to clean up its output, so I
used make mrproper. However, I was still able to find that
libpin_init_internal.so in the rust directory was not deleted, while
all other corresponding outputs were cleared.
Thus add it to the `MRPROPER_FILES` list.
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Chen Miao <chenmiao@openatom.club>
Fixes: d7659acca7 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/71ff222b8731e63e06059c5d8566434e508baf2b.1761876365.git.chenmiao@openatom.club
[ Fixed tags and Git author as discussed. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d02f20a4de upstream.
In the existing implementation irq_shutdown does not mask the interrupts
in hardware. This can cause spurious interrupts from the IO expander.
Add masking to irq_shutdown to prevent spurious interrupts.
Cc: stable@vger.kernel.org
Signed-off-by: Martin Larsson <martin.larsson@actia.se>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260121125631.2758346-1-martin.larsson@actia.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4747bafaa5 upstream.
If nonemb_cmd->va fails to be allocated, free the allocation previously
made by alloc_mcc_wrb().
Fixes: 50a4b824be ("scsi: be2iscsi: Fix to make boot discovery non-blocking")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251213083643.301240-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9210f5ff63 upstream.
imx-card currently sets the slot width to the physical sample width
for I2S links. This breaks controllers that use fixed-width slots
(e.g. 32-bit FIFO words), causing the unused bits in the slot to
contain undefined data when playing 16-bit streams.
Do not override the slot width in the machine driver and let the CPU
DAI select an appropriate default instead. This matches the behavior
of simple-audio-card and avoids embedding controller-specific policy
in the machine driver.
On an i.MX8MP-based board using SAI as the I2S master with 32-bit slots,
playing 16-bit audio resulted in spurious frequencies and an incorrect
SAI data waveform, as the slot width was forced to 16 bits. After this
change, audio artifacts are eliminated and the 16-bit samples correctly
occupy the first half of the 32-bit slot, with the remaining bits padded
with zeroes.
Cc: stable@vger.kernel.org
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260118205030.1532696-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af20ae33e7 upstream.
`rustfmt` is configured via the `.rustfmt.toml` file in the source tree,
and we apply `rustfmt` to the macro expanded sources generated by the
`.rsi` target.
However, under an `O=` pointing to an external folder (i.e. not just
a subdir), `rustfmt` will not find the file when checking the parent
folders. Since the edition is configured in this file, this can lead to
errors when it encounters newer syntax, e.g.
error: expected one of `!`, `.`, `::`, `;`, `?`, `where`, `{`, or an operator, found `"rust_minimal"`
--> samples/rust/rust_minimal.rsi:29:49
|
28 | impl ::kernel::ModuleMetadata for RustMinimal {
| - while parsing this item list starting here
29 | const NAME: &'static ::kernel::str::CStr = c"rust_minimal";
| ^^^^^^^^^^^^^^ expected one of 8 possible tokens
30 | }
| - the item list ends here
|
= note: you may be trying to write a c-string literal
= note: c-string literals require Rust 2021 or later
= help: pass `--edition 2024` to `rustc`
= note: for more on editions, read https://doc.rust-lang.org/edition-guide
A workaround is to use `RUSTFMT=n`, which is documented in the `Makefile`
help for cases where macro expanded source may happen to break `rustfmt`
for other reasons, but this is not one of those cases.
One solution would be to pass `--edition`, but we want `rustfmt` to
use the entire configuration, even if currently we essentially use the
default configuration.
Thus explicitly give the path to the config file to `rustfmt` instead.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 2f7ab1267d ("Kbuild: add Rust support")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260115183832.46595-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45f6aed8a8 upstream.
The peek_next method's doc comment incorrectly stated it accesses the
"previous" node when it actually accesses the next node.
Fix the documentation to accurately reflect the method's behavior.
Fixes: 98c14e40e0 ("rust: rbtree: add cursor")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Hang Shu <m18080292938@163.com>
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1205
Cc: stable@vger.kernel.org
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20251107093921.3379954-1-m18080292938@163.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
