Pull an operating performance points (OPP) framework fix for 5.12
from Viresh Kumar:
"Single patch to fix an issue where a frequency update may get
skipped."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't skip freq update for different frequency
We skip the OPP update if the current and target OPPs are same. This is
fine for the devices that don't support frequency but may cause issues
for the ones that need to program frequency.
An OPP entry doesn't really signify a single operating frequency but
rather the highest frequency at which the other properties of the OPP
entry apply. And we may reach here with different frequency values,
while all of them would point to the same OPP entry in the OPP table.
We just need to update the clock frequency in that case, though in order
to not add special exit points we reuse the code flow from a normal
path.
While at it, rearrange the conditionals in the 'if' statement to check
'enabled' flag at the end.
Fixes: 81c4d8a3c4 ("opp: Keep track of currently programmed OPP")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[ Viresh: Improved commit log and subject, rename current_freq as
current_rate, document it, remove local variable and rearrange
code. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull operating performance points (OPP) changes for v5.12 from Viresh
Kumar:
"- Generic cleanups across the OPP core (Dmitry Osipenko, Viresh
Kumar).
- New OPP helpers dev_pm_opp_find_level_ceil(),
dev_pm_opp_get_required_pstate(), dev_pm_opp_sync_regulators(),
devm_pm_opp_register_set_opp_helper(),
dev_pm_opp_of_add_table_noclk() and devm_pm_opp_attach_genpd()
(Dmitry Osipenko, Viresh Kumar).
- Allow required OPPs to be used for devfreq devices and related
changes to devfreq governor (Saravana Kannan).
- Significant code changes to allow a new OPP helper,
dev_pm_opp_set_opp() (Viresh Kumar).
- Remove dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
- Allow lazy linking of required-OPPs (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (37 commits)
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
cpufreq: qcom: Migrate to dev_pm_opp_set_opp()
opp: Implement dev_pm_opp_set_opp()
opp: Update parameters of _set_opp_custom()
opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
opp: Allow _generic_set_opp_regulator() to work for non-freq devices
opp: Allow _set_opp() to work for non-freq devices
opp: Split _set_opp() out of dev_pm_opp_set_rate()
opp: Keep track of currently programmed OPP
opp: No need to check clk for errors
...
Look at the required OPPs of the "parent" device to determine the OPP that
is required from the slave device managed by the passive governor. This
allows having mappings between a parent device and a slave device even when
they don't have the same number of OPPs.
While at it do a minor spell-fix and remove out label.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Rearranged code and clean error paths ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table can be used often in devfreq. Trying to get it each time can
be expensive, so cache it in the devfreq struct.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Added a blank line ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a function that allows looking up required OPPs given a source OPP
table, destination OPP table and the source OPP.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Rearranged code, fixed return errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Checkpatch gives following warning for new patches, and the new patches
normally follow the existing standards for such stuff. Lets fix it
properly.
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Not all devices that need to use OPP core need to have clocks, a missing
clock is fine in which case -ENOENT shall be returned by clk_get().
Anything else is an error and must be handled properly.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The bandwidth must be scaled at a different point in the code flow based
on if we are scaling up or down the frequency, otherwise this may cause
undesired effects as the device will try to use more of the memory
bandwidth which may be shared across several devices. Much like how
regulators and required-opps are programmed.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The OPP core currently requires the required opp tables to be available
before the dependent OPP table is added, as it needs to create links
from the dependent OPP table to the required ones. This may not be
convenient for all the platforms though, as this requires strict
ordering for probing the drivers.
This patch allows lazy-linking of the required-opps. The OPP tables for
which the required-opp-tables aren't available at the time of their
initialization, are added to a special list of OPP tables:
lazy_opp_tables. Later on, whenever a new OPP table is registered with
the OPP core, we check if it is required by an OPP table in the pending
list; if yes, then we complete the linking then and there.
An OPP table is marked unusable until the time all its required-opp
tables are available. And if lazy-linking fails for an OPP table, the
OPP core disables all of its OPPs to make sure no one can use them.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
All the users have migrated to dev_pm_opp_set_opp() now, get rid of the
duplicate API, dev_pm_opp_set_bw(), which only performs a part of the new API.
While at it, remove the unnecessary parameter to _set_opp_bw().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
We don't want the OPP core to manage the clk for this driver, migrate to
dev_pm_opp_of_add_table_noclk() to make sure dev_pm_opp_set_opp()
doesn't have any side effects.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The new helper dev_pm_opp_set_opp() can be used for configuring the
devices for a particular OPP and can be used by different type of
devices, even the ones which don't change frequency (like power
domains).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Drop the unnecessary parameters and follow the pattern from
_generic_set_opp_regulator().
While at it, also remove the local variable old_freq.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
In order to avoid conditional statements at the caller site, this patch
updates _generic_set_opp_clk_only() to work for devices that don't
change frequency (like power domains, etc.). Return 0 if the clk pointer
passed to this routine is not valid.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The _generic_set_opp_regulator() helper will be used for devices which
don't change frequency (like power domains, etc.) later on, prepare for
that by not relying on frequency for making decisions here.
While at it, update its parameters to pass only what is necessary.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The _set_opp() helper will be used for devices which don't change frequency
(like power domains, etc.) later on, prepare for that by not relying on
frequency for making decisions here.
While at it, also update the debug print to contain all relevant
information.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The _set_opp() helper will be used for devices which don't change their
frequency (like power domains, etc.) later on, prepare for that by
breaking the generic part out of dev_pm_opp_set_rate().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The dev_pm_opp_set_rate() helper needs to know the currently programmed
OPP to make few decisions and currently we try to find it on every
invocation of this routine.
Lets start keeping track of the current_opp programmed for the devices
of the opp table, that will be quite useful going forward.
If we fail to find the current OPP, we pick the first one available in
the list, as the list is in ascending order of frequencies, level, or
bandwidth and that's the best guess we can make anyway.
Note that we used to do the frequency comparison a bit early in
dev_pm_opp_set_rate() previously, and now instead we check the target
opp, which shall be more accurate anyway.
We need to make sure that current_opp's memory doesn't get freed while
it is being used and so we keep a reference of it until the time it is
used.
Now that current_opp will always be set, we can drop some unnecessary
checks as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Clock is not optional for users who call into dev_pm_opp_set_rate().
Remove the unnecessary checks.
While at it also drop the local variable for clk and use opp_table->clk
instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
This routine has nothing to do with frequency, it just disables all the
resources previously enabled. Rename it to match its purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Check whether OPP table has regulators in _set_opp_custom() and set up
dev_pm_set_opp_data accordingly. Now _set_opp_custom() works properly,
i.e. it doesn't crash if OPP table doesn't have assigned regulators.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Rearrange the routine a bit ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Until now the ->set_opp() helper (i.e. special implementation for
setting the OPPs for platforms) was implemented only to take care of
multiple regulators case, but going forward we would need that for other
use cases as well.
This patch prepares for that by allocating the regulator specific part
from dev_pm_opp_set_regulators() and the opp helper part from
dev_pm_opp_register_set_opp_helper().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Print OPP level in debug message of _opp_add_static_v2(). This helps to
chase GENPD bugs.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
NVIDIA Tegra SoCs have a power domains topology such that child domains
only clamp a power rail, while parent domain controls shared performance
state of the multiple child domains. In this case child's domain doesn't
need to have OPP table. Hence we want to allow children power domains to
pass performance state to the parent domain if child's domain doesn't have
OPP table.
The dev_pm_opp_xlate_performance_state() gets src_table=NULL if a child
power domain doesn't have OPP table and in this case we should pass the
performance state to the parent domain.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add resource-managed version of dev_pm_opp_attach_genpd().
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Manually apply the patch and relocate the routines ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add resource-managed version of dev_pm_opp_register_set_opp_helper().
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Manually apply the patch and relocate the routines ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A few drivers have device's clk but they don't want the OPP core to
handle that. Add a new helper for them, dev_pm_opp_of_add_table_noclk().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
We acquire the clk at the time the OPP table is allocated, though it
works fine, it is not the best place to do so. One of the main reason
being we may need to acquire it again from dev_pm_opp_set_clkname() if
the platform wants another clock to be acquired instead.
There is also requirement from some of the platforms where they do not
want the OPP core to manage the clock at all.
This patch hence defers acquiring the clk until the time we are certain
about which clk we need to acquire and if we really need to acquire one.
With this commit, the clk will get acquired either from
dev_pm_opp_set_clkname() or while we initialize the OPPs within the
table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The implementation of dev_pm_opp_of_add_table() and
dev_pm_opp_of_add_table_indexed() are almost identical. Create
_of_add_table_indexed() to reduce code redundancy.
Also remove the duplication of the doc style comments by referring to
dev_pm_opp_of_add_table() from dev_pm_opp_of_add_table_indexed().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Extend OPP API with dev_pm_opp_sync_regulators() function, which syncs
voltage state of regulators.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added unlikely() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add dev_pm_opp_get_required_pstate() which allows OPP users to retrieve
required performance state of a given OPP.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a ceil version of the dev_pm_opp_find_level(). It's handy to have if
levels don't start from 0 in OPP table and zero usually means a minimal
level.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The debug message always prints rate=0 instead of a proper value, fix it.
Fixes: 6c591eec67 ("OPP: Add helpers for reading the binding properties")
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added Fixes tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A required OPP may not be available, and thus, all OPPs which are using
this required OPP should be unavailable too.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix adding OPP entries in a wrong (opposite) order if OPP rate is
unavailable. The OPP comparison was erroneously skipped, thus OPPs
were left unsorted.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- handle boolean device properties imported from Apple firmware
correctly.
-----BEGIN PGP SIGNATURE-----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=jRKO
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
toolchains which do not generate section symbols anymore. And a cleanup
ontop.
-----BEGIN PGP SIGNATURE-----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=VV7d
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
the recent UIP handling changes the time readout of non-existent RTCs hangs
forever as the read returns always 0xFF which means the UIP bit is
set. Sanity check the RTC before registering by checking the RTC_VALID
register for correctness.
-----BEGIN PGP SIGNATURE-----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=Q1FX
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for handling advertised, but non-existent 146818 RTCs correctly.
With the recent UIP handling changes the time readout of non-existent
RTCs hangs forever as the read returns always 0xFF which means the UIP
bit is set.
Sanity check the RTC before registering by checking the RTC_VALID
register for correctness"
* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: mc146818: Detect and handle broken RTCs
condition wrong when moving SYSCALL_EMU away from TIF flags.
-----BEGIN PGP SIGNATURE-----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=WMj1
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull single stepping fix from Thomas Gleixner:
"A single fix for the single step reporting regression caused by
getting the condition wrong when moving SYSCALL_EMU away from TIF
flags"
[ There's apparently another problem too, fix pending ]
* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Unbreak single step reporting behaviour
One fix for a bug in our soft interrupt masking, which could lead to interrupt
replaying recursing, causing spurious interrupts.
Thanks to:
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=hC+4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a bug in our soft interrupt masking, which could lead to
interrupt replaying recursing, causing spurious interrupts.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
Pull i2c fix from Wolfram Sang:
"Just one I2C driver update this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Move suspend and resume handling to NOIRQ phase
Pull LED fixes from Pavel Machek:
"This pull is due to 'leds: trigger: fix potential deadlock with
libata' -- people find the warn annoying.
It also contains new driver and two trivial fixes"
* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
Highlights include:
Bugfixes:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
-----BEGIN PGP SIGNATURE-----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=gLzv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.
This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.
A V4L interface is added.
We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.
Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>