[Why & How]
On resume, dm_resume() walks the connector list and, for each connector,
calls dc_link_detect_connection_type() at the top of the loop iteration
before the per-connector dc_exit_ips_for_hw_access() that sits in the
detection branch. There is no dc_exit_ips_for_hw_access() before the loop,
so the very first HW access relies on an earlier connector having already
taken the display out of IPS.
Commit d1d51519bc ("drm/amd/display: Skip eDP detection when no sink")
skips the eDP connector when no panel is present. On a DCN3.5 APU whose
eDP link has no sink, the eDP iteration - which used to bring the HW out
of IPS first - is now skipped, so a downstream DP connector becomes the
first one processed. Its initial DDC/AUX access then runs while the HW is
still idle, the AUX transfers time out (-ETIMEDOUT), and the EDID read
fails:
[drm:dm_helpers_read_local_edid [amdgpu]] *ERROR* EDID err: 2, on connector: DP-1
amdgpu: [drm] *ERROR* No EDID read.
Take the display out of IPS once before the detection loop so the first
connector processed no longer touches the AUX/DDC engine while the HW is
still in idle power state. This keeps the eDP-skip boot/resume
optimization while fixing the DP EDID read failure.
Fixes: d1d51519bc ("drm/amd/display: Skip eDP detection when no sink")
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Adds toggle to immediately restore FAMS2 streams instead of waiting for
DRR VTotal changes to latch
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add calls for overriding UTM table params from PMFW. This is for
debug and test purposes only when PMFW has not yet populated the table
values correctly.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently, init_pipes() is the only interface responsible for
initializing the OPP->MPCC resource for all pipes. However, during
seamless boot transitions, init_pipes() is skipped and we transition
directly to an ODM2:1 config where we end up programming the default SW
struct state of mpc_tree_params, which is 0. This results in a config
where both HUBP0 & HUBP1 are being fed into the same OPP inst, 0 in this
case.
This is purely a case of programming incorrect SW state initialization
values into HW, so fix this by initializing mpc_tree_params with the
correct instances during resource construct.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
These direct inclusions are unnecessary as the relevant headers
are taken care of by the broader inclusions in these files.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
streamclk gating sequence update: disable streamclk gating when using
streamclk
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add KUnit coverage for the EDID CEA extension parsing helpers
dm_edid_parser_send_cea(), parse_edid_cea_dmcu(), parse_edid_cea_dmub()
and parse_edid_cea(). Tests exercise the oversized-chunk rejection and
DMUB-unavailable paths of the send helper, the DMCU ack/VSDB branches
via a mock dmcu_funcs table, the DMUB empty/send-fail branches, and both
routing branches of parse_edid_cea().
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add KUnit tests exercising every guard branch of
dm_restore_drm_connector_state(): the writeback short-circuit, a missing
dc_sink, a NULL connector atomic state, a NULL encoder, a crtc state
without a dc stream, and an unchanged sink that skips the forced atomic
commit.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for an empty amdgpu_dm_atomic_check(), an unchanged
CRTC update, and a detached plane update.
[How]
Use standard DRM KUnit objects and existing state fixtures so each
helper reaches its software-only early return without DC hardware
programming.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for dm_clear_writeback() removing stream writeback
state and dm_set_writeback() leaving a job unarmed when no DC pipe
matches.
[How]
Use the real DC removal helper with a state-only update_bandwidth
fake, and construct the minimal DRM writeback objects needed to reach
the no-pipe cleanup path.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Peak-bandwidth-under-contention validation currently needs an
external tool to manufacture memory contention while querying
peak bandwidth. Expose this as an explicit probe variant so the
driver can generate that contention itself.
[How]
Add a new probe type that builds the same gated perfmon sequence
as the plain peak-BW probe, with a DMA copy of the current
surface into a scratch buffer inserted before the measurement
window to synthesize a competing memory client. Move the scratch
buffer fields onto the base resource pool struct instead of an
ASIC-specific subclass, and reject the probe with a new status
code when the buffer was never allocated. Also fixes a stack-
corruption bug where a local variable's address was captured by
a deferred callback and used after the local went out of scope,
and a missing NULL check on a similar output parameter used by
an early-return path.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for dm_cache_state() covering successful caching
on an empty DRM device and propagation of an atomic suspend error.
[How]
Use the standard DRM KUnit device for the success path and the
shared DM ops table to inject the suspend failure.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for resume_mst_branch_status() without a primary
branch and s3_handle_mst() with an empty connector list.
[How]
Use the real topology mutex and DRM connector iterator. The tests
stop before AUX or topology-manager hardware operations are required.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for update_planes_and_stream_adapter() covering
descending plane sorting, argument forwarding, call ordering, and
DC failure propagation.
[How]
Extend the existing DM KUnit ops table with the two DC calls and use
spies to observe inputs and ordering. Reuse one ops installer for the
adapter and MMHUB tests.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Since PMFW does not yet populate LSDMA BW with correct values,
add an override interface for debug purposes until values are
populated correctly by PMFW.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for dm_gpureset_toggle_interrupts() on DCN,
amdgpu_dm_commit_zero_streams() on an already empty DC state, and
dm_destroy_cached_state() without a cached state.
[How]
GRPH_PFLIP is unused on DCN, so only the vupdate interrupt is toggled
and no interrupt service is needed. An unchanged empty stream list makes
dc_commit_streams() return early.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for amdgpu_dm_enable_self_refresh(), covering the full
update and unsupported link blocks, the skip count gating, the damage
settle window, and a Replay capable link.
[How]
The power module stays NULL, which every mod_power entry point treats as
a no-op, so the event updates can be reached without a live power
module.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a warning when creating the hdmi_frl_status_polling_wq
workqueue because "hdmi_frl_status_polling_workqueue" excceds
WQ_NAME_LEN:
workqueue: name exceeds WQ_NAME_LEN. Truncating to: hdmi_frl_status_polling_workque
Shorten the workqueue name to "hdmi_frl_status_polling_wq" like the
structure member to avoid the warning.
Fixes: 5c9b8b27a8 ("drm/amd/display: Tie FRL support into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260618-amdgpu-fix-wq_name_len-warning-v2-1-ef0e2e6f5be7@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add KUnit tests for manage_dm_interrupts(), covering the off delay
derived from the stream timing, the 30ms fallback, the DCN3.5 APU
instant off, and the vblank disable path.
[How]
The IRQ subsystem is not installed, so amdgpu_irq_get() and
amdgpu_irq_put() only report the missing source; the point is that the
affected DCN versions request it at all.
Assisted-by: Copilot:Claude-Opus-5 GPT-5.6 Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- When calculating the required LSDMA bandwidth, it must be capped to the
global maximum LSDMA BW.
- Also check the calculated bandwidth against what is available in the
SOP
- Rework code to only compute alt-ch params if alt-ch is in use
- Also remove some unused fields
- Fix whitespace errors
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a temporary workaround to address underflows at 4k144 with
DCFCLK set to 200MHz.
[How]
Set the DCFCLK minimum frequency to 300MHz when in AC mode.
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dp_link_settings_read() passed strlen() of each format string as the size
argument to snprintf() and then advanced rd_buf_ptr by that same fixed amount.
The format-string length has no relation to the formatted output length, so
snprintf() truncated each field at a NUL it wrote inside the buffer while the
pointer was advanced past it. The result is a buffer peppered with embedded NUL
bytes and fields that are silently cut short, so the data read back from the
debugfs node does not reflect the actual link settings.
[How]
Use scnprintf() with the real remaining buffer size
(rd_buf_size - (rd_buf_ptr - rd_buf)) and advance rd_buf_ptr by its return
value, which is the number of characters actually written. This both bounds
each write to the space left in rd_buf and keeps the output a single,
properly terminated string. The now-unused str_len local is removed.
Fixes: 41db5f1931 ("drm/amd/display: set-read link rate and lane count through debugfs")
Assisted-by: Copilot:claude-opus-4.8
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches
via its direct MC address without programming a GART window, yet the wipe
still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA
flush can wedge the engine; only flush when a GART window is actually used.
v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed,
and drive the clear and copy paths from that. (Christian)
v3: Make the vm_needs_flush output parameter mandatory instead of
allowing NULL. (Christian)
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5413
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the do_mccs parameter is false, we don't call
dm_helpers_read_mccs_caps, so sink->mccs_caps.freesync_supported is
unlikely to be true.
Fixes: 6f71d5dd32 ("drm/amd/display: Read sink freesync support via mccs")
Bug: https://gitlab.freedesktop.org/drm/amd/-/work_items/5286
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the PPT limit restore out of smu_set_ac_dc. Keep smu_set_ac_dc only
for switching the power source. Drop the restore ppt limit policy
parameter and add the restore logic to ac/dc notification path.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an optional callback for driver-specific cleanup when the GEM
handle of an object is freed. This will be used by AMDGPU to enable
freeing of memory exported to other nodes in a UALink pod once all
user mode references are gone.
The callback is called outside the object_name_lock and before
releasing the reference count on the GEM object
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Derive mtype_remote in gmc_v12_1_get_npa_flags() from
gmc_v12_1_get_mtypes() so the module-parameter override and ASIC
defaults are honored instead of recomputing with hard-coded values.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an amdgpu_mtype_remote module parameter so the MTYPE used for remote
memory accesses can be overridden. For now only MTYPE_NC and MTYPE_UC
are selectable (0 = MTYPE_NC, 1 = MTYPE_UC); it defaults to the
ASIC-dependent value. Currently, it is used only for GFX 12.1.
The MTYPEs resolved for both local and remote memory are logged once.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ualink_map_npa_to_dmabuf() created the NPA import BO in the
CPU/SYSTEM domain and then moved it to NPA. SYSTEM is use_tt=true, so TTM
attaches a host-page ttm_tt that the null move to NPA leaves behind. On
dma-buf export, ttm_bo_populate() then fills that ttm_tt with system
pages, spiking host RAM by the entire NPA window size.
Create the BO directly in the NPA domain (use_tt=false) so no ttm_tt is
ever attached, and relocate it to the exact remote window.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When two threads import the same UALINK handle concurrently, the first
xa_insert() succeeds and the second gets -EBUSY. Convert -EBUSY to
-EAGAIN so user-space retries instead of seeing a spurious error.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mirror the read-only ualink info attributes on each secondary compute
partition as a per-partition ualink node, so a partition-scoped consumer
(e.g. a container that only sees its partition's device node) can read
the ualink identity and state. Partition 0 shares the primary device,
which already exposes that node, so it is skipped. An inactive partition
device won't be having any attributes listed under ualink node.
The per-partition attributes are served by thin wrappers that delegate
to the existing device-level info show functions. A reference on the
info kobject is held for the node's lifetime so it cannot be freed
while a partition still uses it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Assisted-by: Claude (claude-opus-4.7)
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move more IP version specific related things to ualink version file.
Use soc v1.0 IH client id defintion and define mpnht interrupt source
id in ivsrcid header.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ualink_manager_stop() only called xa_destroy() on the exporter,
importer and handle-invalid xarrays, which frees the internal tree but
not the node objects. Entries still present at teardown thus leaked the
nodes, left NPA addresses mapped and kept exported BOs pinned.
Free the entries in all three xarrays explicitly, without exchanging any
NPA protocol messages (the F/W is already halted by
amdgpu_ualink_sw_fini()): mark connections down so the drained workers
and teardown take the message-free path, drain in-flight exporter
cleanup work to empty handle_invalid_xa, then free the remaining
importer and exporter entries before the NPA allocator is torn down.
Also factor the shared importer-node release into
amdgpu_ualink_release_imp_xa_node(), drop/drain stale remote interrupts
in the IRQ handler when the accelerator is not ACTIVE, and refuse outbound
messages in amdgpu_ualink_send_command() when not ACTIVE so an in-flight
cleanup worker cannot emit onto torn-down peer/SDMA state or block
waiting for a response that will never arrive.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An already-ACTIVE accelerator with an unchanged vpod_id skipped
re-activation, so growing or shrinking a live vPod left staying GPUs
with links/GART built for the old member set. Detect membership changes
(owned snapshot vs firmware read-back) and bounce affected ACTIVE peers
once the integrity check passes. Firmware requires a full metadata
reload while halted, so a full deactivate/activate is needed rather than
per-peer deltas.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add UALINK:-tagged dev_info/dev_warn logging along the vpod commit ->
update_accel_state -> integrity -> activate path so failing and -EAGAIN
peer-wait cases are visible without dynamic debug. Also fix a wrong
print arg (vpod->id -> vpod->addr_mode) in the invalid addr mode
message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remote->active_accel_bits aliased info->vpod.active_accel_bits, which
psp_ual_query_info() refreshes on every commit. Teardown
(peer_remote_fini / gart unmap) then iterated the new set instead of the
one sw_init mapped, orphaning drm_mm nodes in the shared GTT manager.
Make active_accel_bits an owned snapshot copied at sw_init time. Drop the
now-redundant not-initialised guard in metadata_npa_unmapping(), since the
earlier remote->ring_bo NULL-check already covers that case.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For updating the vpod configuration, use similar logic in both sideband
and inband paths.
In inband path, force the vpod id as invalid when ppod configuration is
done. Remove the redundant query call after station configuration as it
station configuration doesn't affect vpod configuration.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep state transitions under lock. Validate the ppod/vpod config or both
based on the state passed by ASP. When a config update is received, if
the GPU is already active on a vpod, local vpod gpu integrity check is
skipped to keep minimal disruption. A gpu removed from the vpod will get
the new vpod id as 0. A GPU is not expected to transition directly from a
valid/nonzero vpod id to another valid vpod id. It needs to be removed
from the existing vpod first.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add handlers for ualink notifications from ASP. Pause/Resume
notifications are not handled currently.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to send completion command to ASPs after processing ualink
notifications.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use __check_local_vpod_integrity and __check_vpod_info for vpod
validation checks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add explicit PPOD/VPOD states for clarity. Assign the state accordingly
as received from ASP during initialization.
UALink accel state transitions:
UNCONFIGURED -> PPOD_CONFIGURED -> VPOD_CONFIGURED -> READY -> ACTIVE
- PPOD: sysfs ppod commit/ ASP {UAL_CFG_PPOD}
- VPOD: sysfs vpod commit/ ASP {UAL_CFG_VPOD} | {UAL_CFG_STATION}
- READY: local vpod integrity + activate_accelerator()
- ACTIVE: all local gpus belonging to one vpod are configured and ready.
deactivate_accelerator(): READY -> PPOD_CONFIGURED
invalid vpod: -> ERROR
Query ualink info during late init phase. Add a local vpod integrity
check before activating devices in the vpod. Move the devices to active
state once integrity check passes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Message handshake with NHT firmware is IP specific. Separate that into
IP specific file. Move ip block v1.0 definition also the version
specific file.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Manage ualink lifecycle as a separate IP block. For now, use GC version
to add specific ualink ip block.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
