This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZ3qRtwAKCRCejrg/N2X7
/QaMAQCTOEeY9AZ7WZ5fPawhHiRWi/uGmxVGPFoUhaRg8Npu1AEA45yPIoJiIUHu
0XdWX02XZyKBwvWVppsKlbwF6fASiw8=
=REnr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=r64K
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.14
This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
* tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes
ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes
ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
ARM: dts: at91: Add sama7d65 pinmux
dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3wB8AAKCRCKwlD9ZEnx
cIvMAQCrRApne6xtA5WnNe5GCDkg/AddJgTImIJ7VvYJdNRi1gEA+2wlAtzO/s+S
UB1i0B7ApeY+SeL/gO7+ntK4if3R1g4=
=/DFi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wfr/
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board
(Dario Binacchi)
- Add LVDS compatible string for imx8mm-phg board (Fabio Estevam)
- Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li)
- Add support for i.MX8MP based aristainetos3 boards from ABB
(Heiko Schocher)
- Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou)
- Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT
overlays (Liu Ying)
- A couple of changes from Markus Niebel to enable Open Drain for MDIO
on imx93-tqma9352 boards
- A series from Peng Fan to enable wdog3 fsl,ext-reset-output support
for NXP i.MX93 boards
- A couple changes from Wei Fang to add NETC support for i.MX95
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmd6U+AUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6d1wf+Ka0EO5GsrNy8TLs5NBMfSRpGiZmK
v42FL/z4Hz74lwYRhQpEOQbQQPYYNgVQXOcPPgqmLj8+vUygDk9gHANmrw28S3i6
Cg9nqFTO8BpLD0HNwjSmZqvksy48mnO4dDg/0Ci9k1yWRggiQpRU8N5wQAzWDng2
GoExAWd00hpc7oFPMhthNO9MSE/fFPfRymifxyJ4La4GprCmTALG7F4ubGNOVBmf
D1ZWcRicgTazJMpZKTZiuzle9x+V/JrEf3iIS6qykd0SSYJZjxpz6bA5hcYyqkYH
eUg+SrTidS942uvnkhM8YD7vD46av0gLH6gpG7btVrSBoojzpvHdTEoC5w==
=ophk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmeJDIoACgkQYKtH/8kJ
Uif/sg//afaJQEf3j64t1zQKwlxXptx9tczjN2HmnofCEwzmfx8oxLt9yCGB/pWI
CKppqHMkz25VIVs2rlZxINssS0GLxVFl66VYo6Yl9IYKdr40dCFDi+s84ktBChBu
o8hBX6AgczKEhrgpGNn9CA6VU4LSUX49hUp8uTLT3iwYlZCF8pRFMxGXWsZzNzmD
d1EPUBZhW3DR7VleZxG9HwuC/CxHD/6LSu/WPKCFWPTe973c6CBbBfvNy51jZ4Ho
f7Izh/TfNQEEdkRE1G1JCSMtk7VJ3zs76lOd6IXsNdkrGopXP74YQm2JxP9ZYJkR
N4ZQ4A/6t7NsU/yaylue9H4t/G0gGleZDF4wjes4kV1RUe+wIpZDW6P5lXv3/JdG
9e4LkUYk7t6RJyu9Gw7nFqQiRLQAmyG7JnllG9WJryk5LuqmLPGq2NSSB5DESXyn
V5ZO0hIiRwb4i6ohtxxqJV8Sc9xWYWqubM5hcl6EHxJiSP41bJPSeS8tPTAY7EGC
EDnfvgpUsf5oB5P2isuCkXrhrqm58FzvrMLvXZA5NfHEnxaJE5PidF4ivnYSZeyb
UVvTayWFwNvhRlwndNrt91MH9NhRPh/jPGH+qSboGAp8bWny8dJ1q8ad5K7S5RCy
4WDTEa2YyRXUE8OvM5IqwzIUAhrFNZr/sxmuh4UewogaZ6bGzbc=
=50jj
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.14:
- Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board
(Dario Binacchi)
- Add LVDS compatible string for imx8mm-phg board (Fabio Estevam)
- Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li)
- Add support for i.MX8MP based aristainetos3 boards from ABB
(Heiko Schocher)
- Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou)
- Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT
overlays (Liu Ying)
- A couple of changes from Markus Niebel to enable Open Drain for MDIO
on imx93-tqma9352 boards
- A series from Peng Fan to enable wdog3 fsl,ext-reset-output support
for NXP i.MX93 boards
- A couple changes from Wei Fang to add NETC support for i.MX95
* tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx93-9x9-qsb: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-14x14-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-11x11-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: imx95-19x19-evk: add ENETC 0 support
arm64: dts: imx95: add NETC related nodes
arm64: dts: imx8mm-phg: Add LVDS compatible string
arm64: dts: imx93: add pca9452 support
arm64: dts: imx8mn-bsh-smm-s2/pro: add simple-framebuffer
arm64: dts: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO
arm64: dts: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO
arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
arm64: dts: imx8mp: add aristainetos3 board support
arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4
arm64: dts: imx: Switch to simple-audio-card,hp-det-gpios
Link: https://lore.kernel.org/r/20250105095139.714590-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add compatibles for i.MX8MP based SoM and carrier from ABB
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmd6TFoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7JmAgApQZmi/iEzyy+WcUxDXyKoeP/jL5r
WQrWHDvAIeIrEvqR+eb34MSy1gDrThk0XceegHF3w0wxnutz1isueIV7GwT4RBYs
VDc3tcw3H+A3B86UdRgJ4k75ZavOYcMqy6KMQrdE4nUMcI0tegXFodpvDDiO8fSd
b8kb6hux38zxLrFIljUdfALH3FV8uEZtUIh1iYlBmuLvI8N+uQTpinYnwKXmKrAs
7gwgqIFVOmXyKjTCxdmvYqc8qjA+mOaR9wr0Bm49ceUS2hvptCR3KOPl5tnbc4qu
H8EDrao5axaaACKZn7D8jIBXkpYS9HBoVupOnowkDj8GeqQ6kNIMzkGNEQ==
=O9l8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xX5g
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings change for 6.14:
- Add compatibles for i.MX8MP based SoM and carrier from ABB
* tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add ABB SoM and carrier
Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected).
2. SoCFPGA: Drop spidev devices which are not properly described in DTS,
but are using some other compatibles. This was part of wider tree
effort to fix such incorrect hardware descriptions.
Important: Dropping this device node will have user-visible impact:
spidev device will not register.
-----BEGIN PGP SIGNATURE-----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=9jUW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=63gY
-----END PGP SIGNATURE-----
Merge tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.14
1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected).
2. SoCFPGA: Drop spidev devices which are not properly described in DTS,
but are using some other compatibles. This was part of wider tree
effort to fix such incorrect hardware descriptions.
Important: Dropping this device node will have user-visible impact:
spidev device will not register.
* tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit
ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Spreadtrum:
- Correct few issues pointed out by DT schema around properties and
node names.
- Move fuel-gauge from DTSI to DTS, because it belongs to the board.
- Use undeprecated properties, like battery-detect-gpios, already
supported by Linux.
2. Uniphier: Use un-deprecated hp-det-gpios (no ABI impact expected).
-----BEGIN PGP SIGNATURE-----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=4hXT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Q7BZ
-----END PGP SIGNATURE-----
Merge tag 'dt64-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.14
1. Spreadtrum:
- Correct few issues pointed out by DT schema around properties and
node names.
- Move fuel-gauge from DTSI to DTS, because it belongs to the board.
- Use undeprecated properties, like battery-detect-gpios, already
supported by Linux.
2. Uniphier: Use un-deprecated hp-det-gpios (no ABI impact expected).
* tag 'dt64-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: Fix battery-detect-gpios property
arm64: dts: uniphier: Switch to hp-det-gpios
arm64: dts: sprd: sc9863a: reorder clocks, clock-names per bindings
arm64: dts: sprd: sc9863a: fix in-ports property
arm64: dts: sprd: sc2731: move fuel-gauge monitored-battery to device DTS
arm64: dts: sprd: sp9860g-1h10: fix factory-internal-resistance-micro-ohms property
arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property
Link: https://lore.kernel.org/r/20241231132847.135814-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
-----BEGIN PGP SIGNATURE-----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=Ps/u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmeH9ZEACgkQYKtH/8kJ
UiftNxAAr1VHsS7oW4h2viFwGnVK4g6cx0TIPrIar5XoxrmBiv3McZyLsFFpzaLE
Cbb4W0ikWriCAHrs6GQhFlEhLv/isveBvjZIRO1Y5rClUPLXkdHNYuWMhwCFeofc
9uW6Ti/uXCAAkgt8h+qdaglXiOedNTAmqq+iHBMnD9JeMm42wcMdUx2ZUcGiOPe7
PkdFVA2e8d0crVrXLwgwOaBcsx93xKSJDy8VWIejn5wOCgVnVJR90v38O8itrXo8
W26ddAnlpKuSMq1Kj5iFnaj1A6ODswNuXKN7IgekfGprSE1ZtdG1CVmVPo/c5X7+
bELBxexSuCz/o9bieBeBLAzCFTgw1MqJDdXmoGIfqqHNALoFpaPMKHpDTnBpNgef
DfA3U5ai+QtI+AqtR0qhV6ltCJKFimx3PdBR0P+FegvswMitCwJScIoGje4xOR7A
VUYTyMRLES4GsC9m9K/442Vnk7LIRPfzOZXTUWbVfPd50BTc8rexjUEJLD8LwFfJ
0PDtDD5JRR1MK+cgzBKTJVSUBd4AyZmYRWlA1+fI9//Ir3NO9kZWlF0nUgLAWS5m
KS3Rdy4RVj2XPuszpsMVjCwShNNEeKT1WQnK6QM9eUvPp0m1y8oMWgtHwkn0gjD9
mt4cSREdbE8U/MhO/FhKlq0g4RdmOp6fEjfUVstzo2GvW5xo420=
=iQYo
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add mailbox node for the T-Head TH1520 RISC-V SoC. The mailbox bindings
and driver were already merged in v6.13:
b2cf36e4a2 ("dt-bindings: mailbox: Add thead,th1520-mailbox bindings")
5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCZ3HTaQAKCRDb7CzD2Six
DFB8AP4qH+AyfcGfn+1xVIkyO/2isqp0Prl6FnQygNSbzkOxqAD/d5OJO9ie11kg
8y5AyxfHuB9X4Op7DFR7UPKv7059Awk=
=9M4R
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux into soc/dt
thead-dt-for-v6.14: T-HEAD Devicetrees for v6.14
Add mailbox node for the T-Head TH1520 RISC-V SoC. The mailbox bindings
and driver were already merged in v6.13:
b2cf36e4a2 ("dt-bindings: mailbox: Add thead,th1520-mailbox bindings")
5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux:
riscv: dts: thead: Add mailbox node
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal,
disabling SPI leads to messages like when suspending:
Powerdomain (core_pwrdm) didn't enter target state 0
and according to /sys/kernel/debug/pm_debug/count off state is not
entered. That was not connected to SPI during the discussion
of disabling SPI. See:
https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/
The reason is that SPI is per default in slave mode. Linux driver
will turn it to master per default. It slave mode, the powerdomain seems to
be kept active if active chip select input is sensed.
Fix that by explicitly disabling the SPI3 pins which used to be muxed by
the bootloader since they are available on an optionally fitted header
which would require dtb overlays anyways.
Fixes: a622310f7f ("ARM: dts: gta04: fix excess dma channel usage")
CC: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The second CSI-2 C-PHY data-lanes have different line orders (BCA) than
the two other data-lanes (ABC) for both connected CSI-2 receivers,
describe this in the device tree.
This has worked in the past as the R-Car CSI-2 driver did not have
documentation for the line order configuration, hence magic values were
written to the registers for this specific setup. Now the registers
involved are documented, the hardware description as well as the driver
needs to be updated.
Note that the numerical values will be replaced by symbolic values
later.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250106104458.3596109-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the entry for the GPU (Mali400) on the stih410.dtsi
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
ST STiH410 SoC has a Mali400. Add a compatible for it.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3hDOwAKCRCKwlD9ZEnx
cO0MAQDIZaN9Ry+BBi8nksGT2tQtnSEXni2iqZzaKfN1CrBe4AEAuFup2hkQhhLy
MD2fvxNTacoXxgy7iGy764SORPlccgs=
=vf2c
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g047-dt-binding-defs-tag2' into renesas-dts-for-v6.14
Renesas RZ/G3E Pin Control DT Binding Definitions
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
Replace RZG2L_* macros with RZV2H_* macros, so that we can define
port names in alpha-numeric.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/20241216195325.164212-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3hCTwAKCRCKwlD9ZEnx
cMTDAQCkOESajJjg2yz8v2WjNI/7UGyeBukAva2xryU95mrDzgEAzrR+Yv8g4xUI
lSOCp3kZKICrffxkgHDGOTv8bTFC3gM=
=KRhC
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag2' into renesas-dts-for-v6.14
Renesas RZ/V2H Pin Control DT Binding Definitions
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
Add documentation for the pin controller found on the Renesas RZ/G3E
(R9A09G047) SoC. The RZ/G3E PFC is similar to the RZ/V2H SoC but has more
pins(P00-PS3).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/V2H has ports P0-P9 and PA-PB. Add support for defining alpha-numerical
ports in DT using RZV2H_* macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V.
This property will stop the LDO regulator from switching to 1.8V when the
MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the
SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA10 is used as GPIO to enable the power switch controlling
USB Vbus for the USB Host. The change is needed to fix the PA10 voltage
level to 3.3V instead of 1.8V.
Fixes: 5d4c3cfb63 ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241119160107.598411-3-cristian.birsan@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V.
This property will stop the LDO regulator from switching to 1.8V when the
MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the
SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA6 is used as GPIO to enable the power switch controlling
USB Vbus for the USB Host. The change is needed to fix the PA6 voltage
level to 3.3V instead of 1.8V.
Fixes: d85c4229e9 ("ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board")
Suggested-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241119160107.598411-2-cristian.birsan@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The only board that actually requires these properties is
meson8b-odroidc1.dts but that already sets it on it's own. Drop these
properties from meson.dtsi because otherwise they can cause dtc
warnings:
/soc/usb@c9040000: unnecessary #address-cells/#size-cells without
"ranges", "dma-ranges" or child "reg" property
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241226220352.965505-1-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WDOG_B is connected to external PMIC, so set "fsl,ext-reset-output"
to enable triggering PMIC reset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In
addition, because all ENETC instances share MDIO bus, so enable EMDIO
at the same time.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add NETC related nodes for i.MX95.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mdio-gpio is not a valid pattern according to mdio-gpio.yaml.
Use the generic 'mdio' name to fix the following dt-schema warnings:
'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd)
based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for
usbotg device node. The chipidea usb driver will configure it to otg
mode by default if the dr_mode is not set, but some testcases need to
parse the dr_mode from DT and decide the follow-up test strategy, here
set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based
boards.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx8mm-phg board has an AUO G084SN05 V9 8.4" 800x600 LVDS panel.
Improve the devicetree description by passing the LVDS compatible
string to fix the following dt-schema warning:
imx8mm-phg.dtb: panel: compatible:0: 'panel-lvds' is not one of
['admatec,9904379', 'auo,b101ew05', 'auo,g084sn05',
'chunghwa,claa070wp03xg','edt,etml0700z9ndha', 'hannstar,hsd101pww2',
'hydis,hv070wx2-1e0', 'jenson,bl-jt60050-01a', 'tbs,a711-panel']
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Support pca9452 on imx93-14x14-evk.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
