This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.
-----BEGIN PGP SIGNATURE-----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=kkWf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X0fi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.16-rc1
This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.
* tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove useless usb-ehci compatible string
ARM: tegra: Remove unused backlight-boot-off property
ARM: tegra: nexus7: Enable USB OTG mode
ARM: tegra: Add new properties to USB PHY device-tree nodes
ARM: tegra: Update Broadcom Bluetooth device-tree nodes
ARM: tegra: acer-a500: Correct compatible of ak8975 magnetometer
Link: https://lore.kernel.org/r/20211008201132.1678814-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The patch uses the "dt-bindings/clock/sprd,ums512-clk.h header, which
is not merged yet. This caused a build regression, and it means the
patch was not ready to get merged anyway.
This reverts commit 23410de579.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYWQuQwAKCRAfOrpwrNPN
DP3CAQCOSNWmCOwvlWJdu7/FjsxPsPXmUyUHW0oAFF80sEkaBQEAiN6QlIDvTB9U
Cxn/wYe2zbQ+vJbqkuODTqK104OUdA4=
=Ph50
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FHko
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.16:
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
* tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
ARM: dts: at91: tse850: the emac<->phy interface is rmii
ARM: dts: at91: add Exegin Q5xR5 board
dt-bindings: ARM: at91: document exegin q5xr5 board
dt-bindings: add vendor prefix for exegin
ARM: dts: at91: add CalAmp LMU5000 board
dt-bindings: ARM: at91: document CalAmp LMU5000 board
dt-bindings: add vendor prefix for calamp
ARM: dts: at91: at91sam9260: add pinctrl label
ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support
ARM: dts: at91: sama7g5ek: enable ADC on the board
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama5d27_wlsom1: add wifi device
Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables additional interrupts on the Tegra194 GPIO controller for
better load balancing and/or virtualization, adds audio support on
Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
enables more audio processors that are found on Tegra210 and later.
Various cleanups across the board top things off.
-----BEGIN PGP SIGNATURE-----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=rNmg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dOYU
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.16-rc1
This enables additional interrupts on the Tegra194 GPIO controller for
better load balancing and/or virtualization, adds audio support on
Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
enables more audio processors that are found on Tegra210 and later.
Various cleanups across the board top things off.
* tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix pcie-ep DT nodes
arm64: tegra: Remove useless usb-ehci compatible string
arm64: tegra: Extend APE audio support on Jetson platforms
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Remove unused backlight-boot-off property
arm64: tegra: Add NVDEC to Tegra186/194 device trees
arm64: tegra: Add new USB PHY properties on Tegra132
arm64: tegra: Update HDA card name on Jetson TX2 NX
arm64: tegra: Audio graph sound card for Jetson TX2 NX
arm64: tegra: Add additional GPIO interrupt entries on Tegra194
Link: https://lore.kernel.org/r/20211008201132.1678814-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.
-----BEGIN PGP SIGNATURE-----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=TONa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cvhE
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.16-rc1
This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.
* tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
dt-bindings: Add YAML bindings for NVDEC
Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add basic DT to support Unisoc's UMS512, with this patch,
the board ums512-1h10 can run into console.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20211008034533.343167-3-zhang.lyra@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:
properties:
$nodename:
pattern: "^pcie-ep@"
Change the existing ones in the DT bindings examples to avoid warnings
during DT bindings validation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:
properties:
$nodename:
pattern: "^pcie-ep@"
Change the existing ones in order to avoid those warnings:
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend APE audio support by adding more audio components such as SFC,
MVC, AMX, ADX and Mixer. These components can be plugged into an audio
path and required processing can be done. ASoC audio-graph based sound
driver is used to facilitate this and thus extend sound bindings as
well.
The components in the path may require different PCM parameters (such
as sample rate, channels or sample size). Depending on the pre-defined
audio paths, these can be statically configured with "convert-xxx" DT
properties in endpoint subnode. The support for the rate and channel
conversion is already available in generic audio-graph driver. Sample
size conversion support can be added based on the need in future.
The support is extended for following platforms:
* Jertson TX1
* Jetson Nano
* Jetson TX2
* Jetson AGX Xavier
* Jetson Xavier NX
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for NVDEC on Tegra186, and
device tree nodes for NVDEC and NVDEC1 on Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add YAML device tree bindings for NVDEC, now in a more appropriate
place compared to the old textual Host1x bindings.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
BB2D is a Vivante GC 2D Accelerator.
This adds the node to the dts file within a target module node.
Crossbar index number is used for interrupt mapping.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee32711195 ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace depreciated nodenames, fix label name to match scheme.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Hyphens should be used in label names. make dtbs_check complains
about that since it does not match the corresponding pattern
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Switch the compatible for the am33xx_pinmux pin controller node from
pinctrl-single to pinconf-single. The only change between these two
compatibles is that PCS_HAS_PINCONF will be true. This then allows
pinconf properties to be utilized.
The purpose of this change is to allow the PocketBeagle to use:
pinctrl-single,bias-pullup
pinctrl-single,bias-pulldown
This dts already defines these properites for gpio pins in the default
pinctrl state but it has no effect unless PCS_HAS_PINCONF is set.
The bias properties can then be modified on the corresponding gpio lines
through the gpiod uapi. The mapping between the pins and gpio lines is
defined by gpio-ranges under the gpio controller nodes in am33xx-l4.dtsi
Signed-off-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
H3Ne SoCs and boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbVZQAKCRCKwlD9ZEnx
cA1SAP9EGqPZCa/ICXHn98BAbAxVcOl5tewwbKY3RBRfBcngUgEA1D/LS1F0B317
y2hQhdaqt9n5uA4OUcsiQNuqDemTPAs=
=+chU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PQot
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.16
- Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
H3Ne SoCs and boards.
* tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
Link: https://lore.kernel.org/r/cover.1633081158.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- I2C EEPROM support on the RZA2MEVB development board,
- DMA, USB2.0, and audio support for the RZ/G2L SoC,
- USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
development board,
- Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
H3Ne),
- PWM support for the R-Car M3-W+ and V3U SoCs,
- IPMMU support for SDHI on the R-Car V3U SoC,
- Switches support for the Falcon development board,
- Improve Ethernet PHY descriptions to fix reset handling after kexec,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbUMwAKCRCKwlD9ZEnx
cC3lAQCXJwi2QXqvWKKLPmnkT7GwD5OaF4F1ykBmfExD3fHpcwD5ATmkHwvIGkRG
JOH1BDNSmcq36xwaAsRXmCAWm0dG6wE=
=HxRU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9/VI
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.16
- I2C EEPROM support on the RZA2MEVB development board,
- DMA, USB2.0, and audio support for the RZ/G2L SoC,
- USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
development board,
- Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
H3Ne),
- PWM support for the R-Car M3-W+ and V3U SoCs,
- IPMMU support for SDHI on the R-Car V3U SoC,
- Switches support for the Falcon development board,
- Improve Ethernet PHY descriptions to fix reset handling after kexec,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (45 commits)
arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
ARM: dts: rzg1: Add missing Ethernet PHY resets
ARM: dts: r-mobile: Add missing Ethernet PHY resets
arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs
ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs
ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
arm64: dts: renesas: beacon: Fix Ethernet PHY mode
ARM: dts: renesas: Fix SMSC Ethernet compatible values
arm64: dts: renesas: rzg2l-smarc: Enable CANFD
arm64: dts: renesas: rzg2l-smarc-som: Enable ADC on SMARC platform
arm64: dts: renesas: rzg2l-smarc-som: Move extal and memory nodes to SOM DTSI
arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW47-SW49 support
arm64: dts: renesas: rzg2l-smarc: Add Mic routing
arm64: dts: renesas: rzg2l-smarc: Enable audio
...
Link: https://lore.kernel.org/r/cover.1633081147.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
new thing:
New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)
Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.
Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.
SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)
Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.
A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmFReesQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaOAB/9GKqxpGASvceWq1ZBflL1VLHBWUj8LsK5l
gcHqDtafPuUyXx8fAbD7ND+Rwg9syBHY1p5VnXLqem4iHAluLGFAVAdjjNEVhytV
S6CAcrAcwk8sWjRxN/8ivNKTx7mhXKZAyytvZfRcox2f8oUwuuigchuJxiGK24LW
4XsuMrHkwijPyr1JjFwTbqgdMkIICCPBWpRI0RQHSTulDFCBCEfussYPIw8H+iQ5
KTy1rr7GdpLPIVCOXiHM4KJ2/Uy+a6C8049dExe+Gwg92kj7EhRb3kub+eLZqbJT
6vapPbI0AFiirZ1RI2Gf2yUUAI1yZEB4ABxWVD1yZot0+hGuUIBT
=jjAv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5zhA
-----END PGP SIGNATURE-----
Merge tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
This contains the parts that were originally meant for 5.15 + some
new thing:
New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)
Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.
Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.
SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)
Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.
A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.
* tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (65 commits)
arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion
arm64: dts: rockchip: define iodomains for rk3368-lion
arm64: dts: rockchip: fix LDO_REG4 / LDO_REG7 confusion on rk3368-lion
arm64: dts: rockchip: align operating-points table name with dtschema
arm64: dts: rockchip: hook up camera on px30-evb
arm64: dts: rockchip: add isp node for px30
arm64: dts: rockchip: add Coresight debug range for RK3399
arm64: dts: rockchip: Correct regulator for USB host on Odroid-Go2
arm64: dts: rockchip: fix PCI reg address warning on rk3399-gru
arm64: dts: rockchip: add saradc to rk3568-evb1-v10
arm64: dts: rockchip: Fix GPU register width for RK3328
arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu
arm64: dts: rockchip: add missing rockchip,grf property to rk356x
arm64: dts: rockchip: add RK3399 Gru gpio-line-names
arm64: dts: rockchip: Enable SFC for Odroid Go Advance
arm64: dts: rockchip: Add SFC to RK3308
arm64: dts: rockchip: Add SFC to PX30
arm64: dts: rockchip: add thermal support to Quartz64 Model A
arm64: dts: rockchip: add rk3568 tsadc nodes
arm64: dts: rockchip: add rk356x gpio debounce clocks
...
Link: https://lore.kernel.org/r/4439872.CQOukoFCf9@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYUGo/gAKCRDKSWXLKUoM
IdIJAJ9kAd96FWmyr9o/CM0iXUU+aefNlACfUtuOkYt4zGmfdLpMUK0jlY0auSQ=
=nzU4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hI0/
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: ZynqMP DT changes for v5.16
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
* tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx: (36 commits)
arm64: zynqmp: Wire psgtr for zc1751-xm013
arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
arm64: zynqmp: Enable gpio and qspi for zc1275-revA
arm64: zynqmp: Fix serial compatible string
arm64: zynqmp: Remove not documented is-dual property
arm64: zynqmp: Add psgtr description to zc1751 dc1 board
arm64: zynqmp: Add support for zcu102-rev1.1 board
arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
arm64: zynqmp: Sync psgtr node location with zcu104-revA
arm64: zynqmp: Add reset description for sata
arm64: zynqmp: Move rtc to different location on zcu104-revA
arm64: zynqmp: Wire qspi on multiple boards
arm64: zynqmp: Remove information about dma clock on zcu106
arm64: zynqmp: Update rtc calibration value
arm64: zynqmp: Add note about UHS mode on some boards
arm64: zynqmp: Move DP nodes to the end of file on zcu106
arm64: zynqmp: Remove can aliases from zc1751
arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value
arm64: zynqmp: List reset property for ethernet phy
arm64: zynqmp: Add nvmem alises for eeproms
...
Link: https://lore.kernel.org/r/b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral
devices now can be connected to Nexus 7 using OTG adapter, switching
USB port into host mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host-wakeup GPIO is now marked as deprecated in the broadcom-bluetooth
device-tree binding, it's replaced with the host-wakeup interrupt. Update
Tegra device-trees to the recent version of the Bluetooth binding.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "ak,ak8975" compatible is not recognized by dt-bindings, it's
deprecated. Use supported "asahi-kasei,ak8975" compatible.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.
SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).
When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Atheros
AR8031 PHYs on RZ/G2 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/3f1b58756f149f0c634c66abaecc88e699f4c3cc.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Renesas
uPD60610 or uPD60611 PHYs on RZ/A1 boards. This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards. This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be
Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards. This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be
