[ Upstream commit 8ea085937d ]
Refactor function ice_get_tx_rx_equa() to iterate over new table of
params instead of multiple calls to ice_aq_get_phy_equalization().
Subsequent commit will extend that function by add more serdes equalizer
values to dump.
Shorten the fields of struct ice_serdes_equalization_to_ethtool for
readability purposes.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c5cc2a27e0 ("ice: remove invalid parameter of equalizer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18625e26fe ]
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20
in the initial impl commit (see Fixes tag). All usage code assumed it was
of size 20. That was also the initial size present up to v2 of the intro
series [2], but halved by v3 [3] refactor described as "Replace magic
hardcoded values with macros." The introducing series was so big that
some ugliness was unnoticed, same for bugs :/
ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one.
There was tmp variable @j in the scope of edited function, but was not
used in all places. This ugliness is now gone.
I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of
the holes in order to compensate for the added 10 bytes to the ::bst_key,
resulting in the same size of the whole as prior to the fix, and minimal
changes in the offsets of the fields.
Extend also the debug dump print of the key to cover all bytes. To not
have string with 20 "%02x" and 20 params, switch to
ice_debug_array_w_prefix().
This fix obsoletes Ahmed's attempt at [1].
[1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com
[2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com
[3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain
Fixes: 9a4c07aaa0 ("ice: add parser execution main loop")
CC: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a5b021cb8 ]
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
Tested:
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`.
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15fe4edd7 ]
The transaction salt was being accessed before acquiring the
idpf_vc_xn_lock when idpf has to forward the virtchnl reply.
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 137da75ba7 ]
Restore the call to idpf_vc_xn_shutdown() at the beginning of
idpf_vc_core_deinit() provided the function is not called on remove.
In the reset path the mailbox is destroyed, leading to all transactions
timing out.
Fixes: 09d0fb5cb3 ("idpf: deinit virtchnl transaction manager after vport and vectors")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 396f016567 ]
Add read memory barrier to ensure the order of operations when accessing
control queue descriptors. Specifically, we want to avoid cases where loads
can be reordered:
1. Load #1 is dispatched to read descriptor flags.
2. Load #2 is dispatched to read some other field from the descriptor.
3. Load #2 completes, accessing memory/cache at a point in time when the DD
flag is zero.
4. NIC DMA overwrites the descriptor, now the DD flag is one.
5. Any fields loaded before step 4 are now inconsistent with the actual
descriptor state.
Add read memory barrier between steps 1 and 2, so that load #2 is not
executed until load #1 has completed.
Fixes: 8077c72756 ("idpf: add controlq init and reset checks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Suggested-by: Lance Richardson <rlance@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c9b7db96d ]
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e7 ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 013eb043f3 ]
As reported by Namhyung Kim and acknowledged by Qiao Zhao (link:
https://lore.kernel.org/linux-perf-users/20241206001436.1947528-1-namhyung@kernel.org/),
on certain machines, perf trace failed to load the BPF program into the
kernel. The verifier runs perf trace's BPF program for up to 1 million
instructions, returning an E2BIG error, whereas the perf trace BPF
program should be much less complex than that. This patch aims to fix
the issue described above.
The E2BIG problem from clang-15 to clang-16 is cause by this line:
} else if (size < 0 && size >= -6) { /* buffer */
Specifically this check: size < 0. seems like clang generates a cool
optimization to this sign check that breaks things.
Making 'size' s64, and use
} else if ((int)size < 0 && size >= -6) { /* buffer */
Solves the problem. This is some Hogwarts magic.
And the unbounded access of clang-12 and clang-14 (clang-13 works this
time) is fixed by making variable 'aug_size' s64.
As for this:
-if (aug_size > TRACE_AUG_MAX_BUF)
- aug_size = TRACE_AUG_MAX_BUF;
+aug_size = args->args[index] > TRACE_AUG_MAX_BUF ? TRACE_AUG_MAX_BUF : args->args[index];
This makes the BPF skel generated by clang-18 work. Yes, new clangs
introduce problems too.
Sorry, I only know that it works, but I don't know how it works. I'm not
an expert in the BPF verifier. I really hope this is not a kernel
version issue, as that would make the test case (kernel_nr) *
(clang_nr), a true horror story. I will test it on more kernel versions
in the future.
Fixes: 395d38419f: ("perf trace augmented_raw_syscalls: Add more check s to pass the verifier")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241213023047.541218-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e20a70c572 ]
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes: 40dc166cb5 ("PM / Core: Introduce struct syscore_ops for core subsystems PM")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a197004cf3 ]
When using temperature measurement on Marvell 88Q2XXX devices and the
reset-gpios property is set in DT, the device does a hardware reset when
interface is brought down and up again. That means that the content of
the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that
leads to permanent deactivation of the temperature measurement, because
activation is done in mv88q2xxx_probe. To fix this move activation of
temperature measurement to mv88q222x_config_init.
Fixes: a557a92e68 ("net: phy: marvell-88q2xxx: add support for temperature sensor")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250118-marvell-88q2xxx-fix-hwmon-v2-1-402e62ba2dcb@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b049e7abe9 ]
struct platform_device::id was only set by board code, but since i.MX
became a devicetree-only platform, this will always be -1
(PLATFORM_DEVID_NONE).
Note: of_alias_get_id() returns a negative number on error and base
treats all negative errors the same, so we need not add any additional
error handling.
Fixes: 0f2c7af45d ("gpio: mxc: Convert the driver to DT-only")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250113-b4-imx-gpio-base-warning-v1-3-0a28731a5cf6@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e5995773 ]
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process.
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d31a49d37c ]
Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at
offset 0x2400 but this doesn't make sense as it does conflict with the
CDM4 that is in the same location.
Following the pattern where each GDM base is at the FWD_CFG, currently
GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG
and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the
0x2400 offset. Fix these 2 define by subtracting 0x100 to each register
to reflect the real address location.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250120154148.13424-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdb0ca39e0 ]
Clearing slab cache will free all znode in memory and make
c->zroot.znode = NULL, then dumping tnc tree will access
c->zroot.znode which cause null pointer dereference.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219624#c0
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: pangliyuan <pangliyuan1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09471d8f5b ]
The TOY_MATCH0_REG should be cleared to 0 in the RTC interrupt handler,
otherwise the interrupt cannot be cleared, which will cause the
loongson_rtc_isr() to be triggered multiple times.
The previous code cleared TOY_MATCH0_REG in the loongson_rtc_handler(),
which is an ACPI interrupt. This did not prevent loongson_rtc_isr()
from being triggered multiple times.
This commit moves the clearing of TOY_MATCH0_REG to the
loongson_rtc_isr() to ensure that the interrupt is properly cleared.
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20241205114307.1891418-1-wangming01@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ab8c5ed4f ]
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value.
Fixes: fadfd092ee ("rtc: pcf85063: add nvram support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20241218-rtc-pcf85063-stack-corruption-v1-1-12fd0ee0f046@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09c4a61015 ]
The problem is this multiply in tps6594_rtc_set_offset()
tmp = offset * TICKS_PER_HOUR;
The "tmp" variable is an s64 but "offset" is a long in the
(-277774)-277774 range. On 32bit systems a long can hold numbers up to
approximately two billion. The number of TICKS_PER_HOUR is really large,
(32768 * 3600) or roughly a hundred million. When you start multiplying
by a hundred million it doesn't take long to overflow the two billion
mark.
Probably the safest way to fix this is to change the type of
TICKS_PER_HOUR to long long because it's such a large number.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1074175e-5ecb-4e3d-b721-347d794caa90@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e883c64778 ]
The .probe() of edma_driver calls of_parse_phandle_with_fixed_args() but
does not release the obtained OF nodes. Thus add a of_node_put() call.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 1be5336bc7 ("dmaengine: edma: New device tree binding")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241219020507.1983124-3-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e952837f3d ]
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch.
Reported-by: syzbot+5f9f31cb7d985f584d8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CACT4Y+azwfrE3uz6A5ZErov5YN2LYBN5KrsymBerT36VU8qzBA@mail.gmail.com/
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: c2f672fc94 ("xfrm: state lookup can be lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a331a0e7 ]
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we add a percpu cache to cache the used inbound xfrm states.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Stable-dep-of: e952837f3d ("xfrm: state: fix out-of-bounds read during lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0045e3d806 ]
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we cache the used xfrm states at the policy for outbound
IPsec traffic.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Stable-dep-of: e952837f3d ("xfrm: state: fix out-of-bounds read during lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ddf9916ac ]
Currently all flows for a certain SA must be processed by the same
cpu to avoid packet reordering and lock contention of the xfrm
state lock.
To get rid of this limitation, the IETF standardized per cpu SAs
in RFC 9611. This patch implements the xfrm part of it.
We add the cpu as a lookup key for xfrm states and a config option
to generate acquire messages for each cpu.
With that, we can have on each cpu a SA with identical traffic selector
so that flows can be processed in parallel on all cpus.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Stable-dep-of: e952837f3d ("xfrm: state: fix out-of-bounds read during lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c05c5e5aa1 ]
When skb needs GSO and wrap around happens, if xo->seq.low (seqno of
the first skb segment) is before the last seq number but oseq (seqno
of the last segment) is after it, xo->seq.low is still bigger than
replay_esn->oseq while oseq is smaller than it, so the update of
replay_esn->oseq_hi is missed for this case wrap around because of
the change in the cited commit.
For example, if sending a packet with gso_segs=3 while old
replay_esn->oseq=0xfffffffe, we calculate:
xo->seq.low = 0xfffffffe + 1 = 0x0xffffffff
oseq = 0xfffffffe + 3 = 0x1
(oseq < replay_esn->oseq) is true, but (xo->seq.low <
replay_esn->oseq) is false, so replay_esn->oseq_hi is not incremented.
To fix this issue, change the outer checking back for the update of
replay_esn->oseq_hi. And add new checking inside for the update of
packet's oseq_hi.
Fixes: 4b549ccce9 ("xfrm: replay: Fix ESN wrap around for GSO")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26c0a2d93a ]
The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(),
and the later one may call the preempt_schedule_common() function,
resulting in a thread switch and causing the CPU to be in an interrupt
enabled state after the enable_gpe_wakeup() function returns, leading
to the warnings as follow.
[ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8
[ C0] ...
[ C0] Call Trace:
[ C0] [<90000000002243b4>] show_stack+0x64/0x188
[ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88
[ C0] [<90000000002687e4>] __warn+0x8c/0x148
[ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0
[ C0] [<90000000016478e4>] do_bp+0x204/0x3b8
[ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000
[ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8
[ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0
[ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378
[ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388
[ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48
[ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8
[ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80
[ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98
[ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48
[ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8
[ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48
[ C0] [<9000000001646bc8>] do_vint+0x80/0xe0
[ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8
[ C0] [<900000000164e34c>] __schedule+0x314/0xa48
[ C0] [<900000000164ead8>] schedule+0x58/0xf0
[ C0] [<9000000000294a2c>] worker_thread+0x224/0x498
[ C0] [<900000000029d2f0>] kthread+0xf8/0x108
[ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4
[ C0]
[ C0] ---[ end trace 0000000000000000 ]---
The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect
acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause
a thread switch. Since there is no longer concurrent execution during
loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes()
directly in enable_gpe_wakeup().
The solution is similar to commit 22db06337f ("ACPI: sleep: Avoid
breaking S3 wakeup due to might_sleep()").
Fixes: 366bb35a8e ("LoongArch: Add suspend (ACPI S3) support")
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668135b934 ]
OFFLOAD_CANCEL should be marked MOVEABLE for when we need to move
tasks off a non-functional transport.
Fixes: c975c20926 ("NFS send OFFLOAD_CANCEL when COPY killed")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8380c2d06 ]
We need to include sequence size in the compound.
Fixes: 0491567b51 ("NFS: add COPY_NOTIFY operation")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ead11ac50a ]
nfs4_stat_to_errno() expects a NFSv4 error code as an argument and
returns a POSIX errno.
The problem is LOCALIO is passing nfs4_stat_to_errno() the POSIX errno
return values from filp->f_op->read_iter(), filp->f_op->write_iter()
and vfs_fsync_range().
So the POSIX errno that nfs_local_pgio_done() and
nfs_local_commit_done() are passing to nfs4_stat_to_errno() are
failing to match any NFSv4 error code, which results in
nfs4_stat_to_errno() defaulting to returning -EREMOTEIO. This causes
assertions in upper layers due to -EREMOTEIO not being a valid NFSv4
error code.
Fix this by updating nfs_local_pgio_done() and nfs_local_commit_done()
to use the new nfs_localio_errno_to_nfs4_stat() to map a POSIX errno
to an NFSv4 error code.
Care was taken to factor out nfs4_errtbl_common[] to avoid duplicating
the same NFS error to errno table. nfs4_errtbl_common[] is checked
first by both nfs4_stat_to_errno and nfs_localio_errno_to_nfs4_stat
before they check their own more specialized tables (nfs4_errtbl[] and
nfs4_errtbl_localio[] respectively).
While auditing the associated error mapping tables, the (ab)use of -1
for the last table entry was removed in favor of using ARRAY_SIZE to
iterate the nfs_errtbl[] and nfs4_errtbl[]. And 'errno_NFSERR_IO' was
removed because it caused needless obfuscation.
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d91f98be26 ]
After a console has written a record into UART_TX, it uses
wait_for_xmitr() to wait until the data has been sent out before
returning. However, wait_for_xmitr() will timeout after 10ms,
regardless if the data has been transmitted or not.
For single bytes, this timeout is sufficient even at very slow
baud rates, such as 1200bps. However, when FIFO mode is used,
there may be 64 bytes pushed into the FIFO at once. At a baud
rate of 115200bps, the 10ms timeout is still sufficient. But
when using lower baud rates (such as 57600bps), the timeout
is _not_ sufficient. This causes longer lines to be cut off,
resulting in lost and horribly misformatted output on the
console.
When using FIFO mode, take the number of bytes into account to
determine an appropriate maximum timeout. Increasing the timeout
does not affect performance since ideally the timeout never
occurs.
Fixes: 8f3631f0f6 ("serial/8250: Use fifo in 8250 console driver")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250107212702.169493-2-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd1de91e7 ]
The LKP robot complains about:
drivers/tty/mips_ejtag_fdc.c:1224:31: error: incompatible pointer types passing 'const char *[1]' to parameter of type 'const u8 **' (aka 'const unsigned char **')
Fix this by turning the missing pieces (fetch from kgdbfdc_wbuf) to u8
too. Note the filling part (kgdbfdc_write_char()) already receives and
stores u8 to kgdbfdc_wbuf.
Fixes: ce7cbd9a6c ("tty: mips_ejtag_fdc: use u8 for character pointers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501101327.oGdWbmuk-lkp@intel.com/
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250110115228.603980-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e128f82f70 ]
There are a potential wild pointer dereferences issue regarding APIs
class_dev_iter_(init|next|exit)(), as explained by below typical usage:
// All members of @iter are wild pointers.
struct class_dev_iter iter;
// class_dev_iter_init(@iter, @class, ...) checks parameter @class for
// potential class_to_subsys() error, and it returns void type and does
// not initialize its output parameter @iter, so caller can not detect
// the error and continues to invoke class_dev_iter_next(@iter) even if
// @iter still contains wild pointers.
class_dev_iter_init(&iter, ...);
// Dereference these wild pointers in @iter here once suffer the error.
while (dev = class_dev_iter_next(&iter)) { ... };
// Also dereference these wild pointers here.
class_dev_iter_exit(&iter);
Actually, all callers of these APIs have such usage pattern in kernel tree.
Fix by:
- Initialize output parameter @iter by memset() in class_dev_iter_init()
and give callers prompt by pr_crit() for the error.
- Check if @iter is valid in class_dev_iter_next().
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-1-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a145c848d6 ]
dereference_symbol_descriptor() needs to obtain the module pointer
belonging to pointer in order to resolve that pointer.
The returned mod pointer is obtained under RCU-sched/ preempt_disable()
guarantees and needs to be used within this section to ensure that the
module is not removed in the meantime.
Extend the preempt_disable() section to also cover
dereference_module_function_descriptor().
Fixes: 04b8eb7a4c ("symbol lookup: introduce dereference_symbol_descriptor()")
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Helge Deller <deller@gmx.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250108090457.512198-2-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee70999a98 ]
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename().
Link: https://lkml.kernel.org/r/20250111143518.7901-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250111143518.7901-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+32c3706ebf5d95046ea1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32c3706ebf5d95046ea1
Reported-by: syzbot+1097e95f134f37d9395c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1097e95f134f37d9395c
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 367a9bffab ]
nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca76bb226b ]
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7
Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 276c61385f ]
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com
Fixes: 9e33d69f55 ("ocfs2: Implementation of local and global quota file handling")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db902986de ]
z_erofs_shrink_scan() could return small numbers due to the mistyped
`freed`.
Although I don't think it has any visible impact.
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250114040058.459981-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf1aa03980 ]
`struct erofs_workgroup` was introduced to provide a unique header
for all physically indexed objects. However, after big pclusters and
shared pclusters are implemented upstream, it seems that all EROFS
encoded data (which requires transformation) can be represented with
`struct z_erofs_pcluster` directly.
Move all members into `struct z_erofs_pcluster` for simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-3-hsiangkao@linux.alibaba.com
Stable-dep-of: db902986de ("erofs: fix potential return value overflow of z_erofs_shrink_scan()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b091e8ed24 ]
Just fold them into the only two callers since
they are simple enough.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-1-hsiangkao@linux.alibaba.com
Stable-dep-of: db902986de ("erofs: fix potential return value overflow of z_erofs_shrink_scan()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 352fafe977 ]
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state.
Fixes: 1c8506d626 ("firewire: test: add test of device attributes for simple AV/C device")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250110084237.8877-1-hanchunchao@inspur.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295006f6e8 ]
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value.
Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)"
will not be satisfied, preventing execution from entering
bsg_remove_queue(), which could lead to the following crash:
BUG: kernel NULL pointer dereference, address: 000000000000041c
Call Trace:
<TASK>
mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr]
mpi3mr_remove+0x6f/0x340 [mpi3mr]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19d/0x220
unbind_store+0xa4/0xb0
kernfs_fop_write_iter+0x11f/0x200
vfs_write+0x1fc/0x3e0
ksys_write+0x67/0xe0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Fixes: 4268fa7513 ("scsi: mpi3mr: Add bsg device support")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250107022032.24006-1-kanie@linux.alibaba.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf247deb3 ]
We should remove the bsg device when bsg_setup_queue() fails to release the
resources.
Fixes: df032bf27a ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241218014214.64533-2-kanie@linux.alibaba.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad7c3c0cb8 ]
Currently, the code does:
if (x == 0) {
x &= ~0x3;
x |= 0x1;
}
Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly
set the variable to 1.
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1390a33b3d ]
On Microchip PolarFire SoC the PCIe Root Port can be behind one of three
general purpose Fabric Interface Controller (FIC) buses that encapsulates
an AXI-S bus. Depending on which FIC(s) the Root Port is connected through
to CPU space, and what address translation is done by that FIC, the Root
Port driver's inbound address translation may vary.
For all current supported designs and all future expected designs, inbound
address translation done by a FIC on PolarFire SoC varies depending on
whether PolarFire SoC is operating in coherent DMA mode or noncoherent DMA
mode.
The setup of the outbound address translation tables in the Root Port
driver only needs to handle these two cases.
Setup the inbound address translation tables to one of two address
translations, depending on whether the Root Port is being used with
coherent DMA or noncoherent DMA.
Link: https://lore.kernel.org/r/20241011140043.1250030-3-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
[bhelgaas: adapt for ac7f53b7e7 ("PCI: microchip: Add support for using
either Root Port 1 or 2")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
