- New board support: NetCube Systems Kumquat
- Enable USB and LED on Anbernic RG35XX
- Fix reboot GPIO detection logic on Anbernic RG35XX
- Disable (non-existent) battery thermistor on Anbernic RG35XX
- Add CPU OPP table for A100
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmfSxtYOHHdlbnNAY3Np
ZS5vcmcACgkQOJpUIZwPJDAZ8g/7BhQDsWmS7CBtl1r0ovRR7t2N/slqoJMwFNix
5AU4Zpj7XCGPyejq0qxEm1M3apaAJV3JlbF0XTIIE3rKxhfpzalzK1KQhc4oXYDR
ze432ezkFE/7j8yjrBFQujufdyWpjHKlWs76oykkB7Wo03JKL1Smht2Vhx2bIRQA
gs2Mb+cBiQuJJFcUF0TNUx/s7ivsjNT7ddNRULwBhvmpeTlROT5Jnd/YOZbUrA2E
/61F32v+HAJE0eBjmZzVDgivIbi9kSovUzKtAY3ewsh+zytJ69TqRGVk0kH9n7+/
PoPB2SkyImgnorgxNn1I5sOiMAHlGyQ0XOidQqNfPTZmrL2I0DCLKhcF6ozJ3HmT
gHRlrcOQErsh4paZKXqkKuwyWJ1aQVveYiEJvqqD4rDR3x7wz+Tcd7XdaiFqV13u
9x2z4aFkLcGEaPBFuFtWDdIgAeuSLiDGlL9GaAMAcGTBU4UT3pSoC6qKOhtYEMZJ
qhBHg3PqJw7y/FQiQoHVfkNzMvYdcD5csai4ZgrTyd7xchlAVhHyiLL1aQMX1V1Q
PBCHMcG3aX0RR9YaFgQwzOgbhCrzrHzbTFI8RukgqDxQAXC1Gjx7n56o1IKsRYmS
pZCe4gT5BPyVpfjVmBzpYgSaCCnUMi4lSkAlRNC0EnUxtqgZua+Y6TUH8Fp88jQH
ycuwxDo=
=Q79O
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=56ER
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.15
- New board support: NetCube Systems Kumquat
- Enable USB and LED on Anbernic RG35XX
- Fix reboot GPIO detection logic on Anbernic RG35XX
- Disable (non-existent) battery thermistor on Anbernic RG35XX
- Add CPU OPP table for A100
* tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: Add CPU Operating Performance Points table
arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery
arm64: dts: allwinner: h700: Add USB Host for RG35XX-H
arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX
arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX
ARM: dts: sunxi: add support for NetCube Systems Kumquat
ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s
dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board
dt-bindings: vendor-prefixes: Add NetCube Systems Austria name
Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
-----BEGIN PGP SIGNATURE-----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=C3kj
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.15, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
arm64: dts: st: add stm32mp215f-dk board support
dt-bindings: stm32: document stm32mp215f-dk board
arm64: dts: st: introduce stm32mp21 SoCs family
arm64: dts: st: add stm32mp235f-dk board support
dt-bindings: stm32: document stm32mp235f-dk board
arm64: dts: st: introduce stm32mp23 SoCs family
dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
arm64: dts: st: add stm32mp257f-dk board support
dt-bindings: stm32: document stm32mp257f-dk board
ARM: dts: stm32: Add Plymovent AQM devicetree
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
dt-bindings: arm: stm32: Add Plymovent AQM board
dt-bindings: sound: convert ICS-43432 binding to YAML
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
ARM: dts: stm32: add usr3 LED node to stm32f769-disco
ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
ARM: dts: stm32: add push button to stm32f746 Discovery board
ARM: dts: stm32: add led to stm32f746 Discovery board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfRN6sUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6vIQf/duM1njX3L5Vlxp7OStdQ5M09tCO4
maknuv2nUMBvM3rmzA8ZIIi/vJjEseah/EMVD+O0bZdJX0K9NwdE1I/jeXVzKCgN
ca6oB0OD58I/TxqOdSzdIQxh+rdbEe/XK4B9b20HpGj/xN347I4bLCR9SITAGOQx
DEJ70Dcrt430oYk7ag6FvskenkXV0JFhGY0hZ/LetFtnfcc5G9QG7jYW2Si+KEqF
MH4HV9u1s/Xng1Yb21ACbeh06Bdakuu/W9ZBGUwgkKRvLgDJdOYFds3xNuhuR8CI
LPbTkWoQqp0Oi9yV1UTxS2vMGfoyxSkQWLBSuPobTCDE3Qj7s1KSt7b92A==
=Exxa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DSmR
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.15:
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
* tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits)
arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block
arm64: dts: imx93: add ddr edac support
arm64: dts: imx95: add ref clock for pcie nodes
arm64: dts: mba8xx: Remove invalid property disable-gpio
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
arm64: dts: mba8mx: change sound card model name
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3
arm64: dts: imx95: Add imx95-15x15-evk support
arm64: dts: imx95: Add i3c1 and i3c2
arm64: dts: imx95: Add #io-channel-cells = <1> for adc node
arm64: dts: imx8mp-skov: support new 7" panel board
arm64: dts: imx8mp-skov: add revC BD500 board
arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers
arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI
arm64: dts: imx8mp-skov: add basic board as fallback
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
...
Link: https://lore.kernel.org/r/20250312074005.663165-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfREaAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4yRQf/evn2a+TJddNbG6SeuulRr07AtGhu
PnVnzRNnMrrGiYKoOXudulii7MWinVWElJJabboow5aEjNhN5K/V0WvXuIwDkOAq
U23i8udMtmdgjt4z4uw/vJb4QKS81YvShxHEf0l+7yoBCcvGFmuMkLF+Q17FmqUx
W6Q2a28AhLNm5o/WH3aA0EZNsiQ33rEyZsvzaMdx2btX1YaHVtBoDGXCsxQLzE/b
WChEdwt0ATrgqFN0gKgL1JU3FKa6alOcxVECjbCQzwPCSuV3ydNqeNCApHN5xVhZ
QtdcdwwLrFIbAyZ0yivamNaiwQR7WxCZ48WE7XYeCa+DkNmOs+8dblIGyw==
=n4I/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=26pZ
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
-----BEGIN PGP SIGNATURE-----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=RKN2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tdEq
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmfMhrcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgS+yCACGOX4BatsdndoOWcr+SeySPVq8CWGONLyk
WPPFC/2JA/a+oFr1YurPZW3+mVfL1ZVauqO7NZluE+6CJOc8+FqobkMOIvJJv15J
jqhGGFLy83IUVwErgGpaxtwQNNPoQahSJuEDmv161knThRaTIjW1w/nrVcEMhSWp
YX73mKQcV2jUbQC/wfJzcryhAA5WJP4NGkPhO34PEyASiSbxsCpHIrWaZb1/EfBP
4nI6mSr1FpQgNsByUQPlSTbN5Yja9/BBWRZ42MIIyPlKKw/TqnMcW4eeHqhA5DS8
nNbZpHnc0Oz6SPAgSSQj0RYRf2UhubxH46ileWBuMf7IG049Sl/J
=yF4g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EFnK
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
-----BEGIN PGP SIGNATURE-----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=f5mG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0hwA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.15-rc1
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
* tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: p2180: Add TMP451 temperature sensor node
arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
arm64: tegra: Remove the Orin NX/Nano suspend key
Link: https://lore.kernel.org/r/20250307174938.3456275-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"spi-controller" is not a documented property nor used anywhere, so drop
it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-4-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The fixed clocks are not part of "simple-bus", so move them out of the
bus to the top-level. In the process, use the preferred node names of
"clock-<freq>". There's also little reason to have multiple fixed
clocks at the same frequencies, so remove them keeping the labels
to minimize the change.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-2-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32MP21 family is composed of 3 SoCs defined as following:
-STM32MP211: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP213: STM32MP211 + a second ETH, CAN-FD.
-STM32MP215: STM32MP213 + Display and CSI2.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP21xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-8-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STM32MP23 family is composed of 3 SoCs defined as following:
-STM32MP231: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP233: STM32MP231 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD.
-STM32MP235: STM32MP233 + GPU/AI and video encode/decode, DSI and LDVS
display.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP23xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-5-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Expand config ARCH_STM32 with two new SoCs families:
- STM32MP21 SoCs family, which is composed of STM32MP211, STM32MP213 and
STM32MP215 SoCs;
- STM32MP23 SoCs family, which is composed of STM32MP231, STM32MP233 and
STM32MP235 SoCs.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-3-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Introduce the devicetree for the Plymovent AQM board
(stm32mp151c-plyaqm), based on the STM32MP151 SoC.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add support for the Plymovent AQM board based on the ST STM32MP151 SoC
to the STM32 devicetree bindings.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305131425.1491769-3-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Convert the ICS-43432 MEMS microphone device tree binding from text format
to YAML.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305131425.1491769-2-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the Variscite i.MX6UL VAR-SOM-MX6UL and the Variscite
Concerto carrier board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Toradex SOMs cannot be used alone without a carrier board, so drop
the usage of its compatible alone.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
AUDIO_AXI_CLK_ROOT can't run at currently requested 600MHz w/ its parent
SYS_PLL1 configured at 800MHz. Configure it to run at 800MHz as some
applications running on the DSP expect the core to run at this frequency
anyways. This change also affects the AUDIOMIX NoC.
Fixes: b739681b3f ("arm64: dts: imx8mp: Fix SDMA2/3 clocks")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "ref" clock for i.MX95's pcie and fix below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: pcie@4c300000: clock-names: ['pcie', 'pcie_bus', 'pcie_phy', 'pcie_aux'] is too short
from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
disable-gpio is an (old) downstream kernel property, which slipped into
DT. Remove it.
Fixes: c01a26b8897a ("arm64: dts: mba8xx: Add PCIe support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e6 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IRQ mapping is already present. Add the missing DMA interrupt. This is
similar to commit 9d9c56025e429 ("arm64: dts: imx8-ss-hsio: Wire up DMA
IRQ for PCIe")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move port@0 and port@1 under ports to fix below DTB_CHECK warnings.
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: port@0:reg:0:0: 0 is less than the minimum of 1
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dr_mode', 'phy-names', 'phys', 'port@0', 'port@1', 'snps,parkmode-disable-ss-quirk' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>