commit 2481af7967 upstream.
On some Lenovo platforms, the patch works around problems with ov2740
sensor initialization, which manifest themself like below:
[ 4.540476] ov2740 i2c-INT3474:01: error -EIO: failed to find sensor
[ 4.542066] ov2740 i2c-INT3474:01: probe with driver ov2740 failed with error -5
or
[ 7.742633] ov2740 i2c-INT3474:01: chip id mismatch: 2740 != 0
[ 7.742638] ov2740 i2c-INT3474:01: error -ENXIO: failed to find sensor
and also by random failures of video stream start.
Issue can be reproduced by this script:
n=0
k=0
while [ $n -lt 50 ] ; do
sudo modprobe -r ov2740
sleep `expr $RANDOM % 5`
sudo modprobe ov2740
if media-ctl -p | grep -q ov2740 ; then
let k++
fi
let n++
done
echo Success rate $k/$n
Without the patch, success rate is approximately 15 or 50 tries.
With the patch it does not fail.
This problem is some hardware or firmware malfunction, that can not be
easy debug and fix. While setting small autosuspend delay is not perfect
workaround as user can configure it to any value, it will prevent
the failures by default.
Additionally setting small autosuspend delay should have positive effect
on power consumption as for most ljca workloads device is used for just
a few milliseconds flowed by long periods of at least 100ms of inactivity
(usually more).
Fixes: acd6199f19 ("usb: Add support for Intel LJCA device")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://lore.kernel.org/r/20241112075514.680712-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fa640d035 upstream.
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9685b409a upstream.
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0812340811 upstream.
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ed9d83a51 upstream.
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 343d7fe6df upstream.
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8 ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING.
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d413eabff1 upstream.
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ebe792a51 upstream.
Internal Speaker of Infinix Y4 Max remains muted due to incorrect
Pin configuration, and the Internal Mic records high noise. This patch
corrects the Pin configuration for the Internal Speaker and limits
the Internal Mic boost.
HW Probe for device: https://linux-hardware.org/?probe=6d4386c347
Test: Internal Speaker works fine, Mic has low noise.
Signed-off-by: Dinesh Kumar <desikumar81@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241125092842.13208-1-desikumar81@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 155699ccab upstream.
BIOS Enable PC beep path cause pop noise via speaker during boot time.
Set to default value from driver will solve the issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/2721bb57e20a44c3826c473e933f9105@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7be34f6fee upstream.
The m1.0 field of UMP Function Block info specifies whether the given
FB is a MIDI 1.0 port or not. When implementing the UMP support on
Linux, I somehow interpreted as if it were bit flags, but the field is
actually an enumeration from 0 to 2, where 2 means MIDI 1.0 *and* low
speed.
This patch corrects the interpretation and sets the right bit flags
depending on the m1.0 field of FB Info. This effectively fixes the
missing detection of MIDI 1.0 FB when m1.0 is 2.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241127070059.8099-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20c0c49720 upstream.
At the conversion of locking with guard(), I overlooked that kvfree()
must not be called inside the spinlock unlike kfree(), and this was
caught by syzkaller now.
This patch reverts the conversion partially for restoring the kvfree()
call outside the spinlock. It's not trivial to use guard() in this
context, unfortunately.
Fixes: 84bb065b31 ("ALSA: rawmidi: Use guard() for locking")
Reported-by: syzbot+351f8764833934c68836@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Closes: https://lore.kernel.org/6744737b.050a0220.1cc393.007e.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241125142041.16578-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c809b0d0e5 upstream.
Due to specific requirements while applying microcode patches on Zen1
and 2, the patch buffer mapping needs to be flushed from the TLB after
application. Do so.
If not, unnecessary and unnatural delays happen in the boot process.
Reported-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: <stable@kernel.org> # f1d84b59cb ("x86/mm: Carve out INVLPG inline asm for use by others")
Link: https://lore.kernel.org/r/ZyulbYuvrkshfsd2@antipodes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f070b1862 upstream.
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846 ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f1efabf8 upstream.
of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.
Add the missing call to of_node_put() after the node has been used.
Cc: stable@vger.kernel.org
Fixes: e95f287dee ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb3daa51db upstream.
A kernel test robot detected a missing error code:
qmc.c:1942 qmc_probe() warn: missing error code 'ret'
Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.
Set the ret error code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c53bf100f6 upstream.
Hold rcu_read_lock in netdev_nl_napi_get_doit, which calls napi_by_id
and is required to be called under rcu_read_lock.
Cc: stable@vger.kernel.org
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241114175157.16604-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26ea2459d1 upstream.
The Voltorb device uses a speaker codec different from the original
Corsola device. When the Voltorb device tree was first added, the new
codec was added as a separate node when it should have just replaced the
existing one.
Merge the two nodes. The only differences are the compatible string and
the GPIO line property name. This keeps the device node path for the
speaker codec the same across the MT8186 Chromebook line. Also rename
the related labels and node names from having rt1019p to speaker codec.
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018082113.1297268-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1429826883 upstream.
Some IPU6 devices have shared interrupts. We need to handle properly
case when interrupt is triggered from other device on shared irq line
and IPU6 itself disabled. In such case we get 0xffffffff from
ISR_STATUS register and handle all irq's cases, for what we are not
not prepared and usually hang the whole system.
To avoid the issue use pm_runtime_get_if_active() to check if
the device is enabled and prevent suspending it when we handle irq
until the end of irq. Additionally use synchronize_irq() in suspend
Fixes: ab29a2478e ("media: intel/ipu6: add IPU6 buttress interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca59f9956d upstream.
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: e8454ff7b9 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea301aec8b upstream.
After assembling the new private flags on a PF, the operation to determine
the changed flags uses the wrong bitmaps. Instead of xor-ing orig_flags
with new_flags, it uses the still unchanged pf->flags, thus changed_flags
is always 0.
Fix it by using the correct bitmaps.
The issue was discovered while debugging why disabling source pruning
stopped working with release 6.7. Although the new flags will be copied to
pf->flags later on in that function, disabling source pruning requires
a reset of the PF, which was skipped due to this bug.
Disabling source pruning:
$ sudo ethtool --set-priv-flags eno1 disable-source-pruning on
$ sudo ethtool --show-priv-flags eno1
Private flags for eno1:
MFP : off
total-port-shutdown : off
LinkPolling : off
flow-director-atr : on
veb-stats : off
hw-atr-eviction : off
link-down-on-close : off
legacy-rx : off
disable-source-pruning: on
disable-fw-lldp : off
rs-fec : off
base-r-fec : off
vf-vlan-pruning : off
Regarding reproducing:
I observed the issue with a rather complicated lab setup, where
* two VLAN interfaces are created on eno1
* each with a different MAC address assigned
* each moved into a separate namespace
* both VLANs are bridged externally, so they form a single layer 2 network
The external bridge is done via a channel emulator adding packet loss and
delay and the application in the namespaces tries to send/receive traffic
and measure the performance. Sender and receiver are separated by
namespaces, yet the network card "sees its own traffic" send back to it.
To make that work, source pruning has to be disabled.
Cc: stable@vger.kernel.org
Fixes: 70756d0a47 ("i40e: Use DECLARE_BITMAP for flags and hw_features fields in i40e_pf")
Signed-off-by: Peter Große <pegro@friiks.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20241113210705.1296408-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49a397ad24 upstream.
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ffade77b6 upstream.
When configuring flow steering rules, the driver is currently going
through a reset for all errors from the device. Instead, the driver
should only reset when there's a timeout error from the device.
Fixes: 57718b60df ("gve: Add flow steering adminq commands")
Cc: stable@vger.kernel.org
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241113175930.2585680-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccd9e252c5 upstream.
Make sure that the tag_list_lock mutex is not held any longer than
necessary. This change reduces latency if e.g. blk_mq_quiesce_tagset()
is called concurrently from more than one thread. This function is used
by the NVMe core and also by the UFS driver.
Reported-by: Peter Wang <peter.wang@mediatek.com>
Cc: Chao Leng <lengchao@huawei.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 414dd48e88 ("blk-mq: add tagset quiesce interface")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20241022181617.2716173-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96a9fe64bf upstream.
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bda857bcb upstream.
Supposing the following scenario.
CPU0 CPU1
blk_mq_insert_request() 1) store
blk_mq_unquiesce_queue()
blk_queue_flag_clear() 3) store
blk_mq_run_hw_queues()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_run_hw_queue()
if (blk_queue_quiesced()) 2) load
return
blk_mq_sched_dispatch_requests()
The full memory barrier should be inserted between 1) and 2), as well as
between 3) and 4) to make sure that either CPU0 sees QUEUE_FLAG_QUIESCED
is cleared or CPU1 sees dispatch list or setting of bitmap of software
queue. Otherwise, either CPU will not rerun the hardware queue causing
starvation.
So the first solution is to 1) add a pair of memory barrier to fix the
problem, another solution is to 2) use hctx->queue->queue_lock to
synchronize QUEUE_FLAG_QUIESCED. Here, we chose 2) to fix it since
memory barrier is not easy to be maintained.
Fixes: f4560ffe8c ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-3-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2003ee8a9a upstream.
Supposing the following scenario with a virtio_blk driver.
CPU0 CPU1 CPU2
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_try_issue_directly()
if (blk_mq_hctx_stopped())
blk_mq_request_bypass_insert() blk_mq_run_hw_queue()
blk_mq_run_hw_queue() blk_mq_run_hw_queue()
blk_mq_insert_request()
return
After CPU0 has marked the queue as stopped, CPU1 will see the queue is
stopped. But before CPU1 puts the request on the dispatch list, CPU2
receives the interrupt of completion of request, so it will run the
hardware queue and marks the queue as non-stopped. Meanwhile, CPU1 also
runs the same hardware queue. After both CPU1 and CPU2 complete
blk_mq_run_hw_queue(), CPU1 just puts the request to the same hardware
queue and returns. It misses dispatching a request. Fix it by running
the hardware queue explicitly. And blk_mq_request_issue_directly()
should handle a similar situation. Fix it as well.
Fixes: d964f04a8f ("blk-mq: fix direct issue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-2-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67ab51cbdf upstream.
Commit 18011eac28 ("arm64: tls: Avoid unconditional zeroing of
tpidrro_el0 for native tasks") tried to optimise the context switching
of tpidrro_el0 by eliding the clearing of the register when switching
to a native task with kpti enabled, on the erroneous assumption that
the kpti trampoline entry code would already have taken care of the
write.
Although the kpti trampoline does zero the register on entry from a
native task, the check in tls_thread_switch() is on the *next* task and
so we can end up leaving a stale, non-zero value in the register if the
previous task was 32-bit.
Drop the broken optimisation and zero tpidrro_el0 unconditionally when
switching to a native 64-bit task.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 18011eac28 ("arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241114095332.23391-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d369735e02 upstream.
In ublk_ch_mmap(), queue id is calculated in the following way:
(vma->vm_pgoff << PAGE_SHIFT) / `max_cmd_buf_size`
'max_cmd_buf_size' is equal to
`UBLK_MAX_QUEUE_DEPTH * sizeof(struct ublksrv_io_desc)`
and UBLK_MAX_QUEUE_DEPTH is 4096 and part of UAPI, so 'max_cmd_buf_size'
is always page aligned in 4K page size kernel. However, it isn't true in
64K page size kernel.
Fixes the issue by always rounding up 'max_cmd_buf_size' with PAGE_SIZE.
Cc: stable@vger.kernel.org
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241111110718.1394001-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fb2f89fa upstream.
Initialize the variable ret at the time of declaration to prevent it from
being returned without a defined value. Fixes smatch warning:
drivers/iio/industrialio-gts-helper.c:256 gain_to_scaletables() error:
uninitialized symbol 'ret'.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014505.2313035-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07593293ff upstream.
The 'fw_vols' fwnode_handle initialized via
device_get_named_child_node() requires explicit calls to
fwnode_handle_put() when the variable is no longer required.
Add the missing calls to fwnode_handle_put() before the function
returns.
Cc: stable@vger.kernel.org
Fixes: 51932f9fc4 ("mtd: ubi: populate ubi volume fwnode")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5a23a60e8 upstream.
When CONFIG_DMA_ENGINE is disabled, the driver now fails to build:
drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx':
drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma'
1822 | if (uap->using_rx_dma) {
| ^~
drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr'
1823 | uap->dmacr |= UART011_RXDMAE;
| ^~
drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr'
1824 | pl011_write(uap->dmacr, uap, REG_DMACR);
| ^~
Add the missing #ifdef check around these field accesses, matching
what other parts of this driver do.
Fixes: 2bcacc1c87 ("serial: amba-pl011: Fix RX stall when DMA is used")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bcacc1c87 upstream.
Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which
also disables the RX DMA by clearing the RXDMAE bit of the DMACR
register. However, to properly unthrottle RX when DMA is used, the
function pl011_unthrottle_rx() is expected to set the RXDMAE bit of
the DMACR register, which it currently lacks. This causes RX to stall
after the throttle API is called.
Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is
used.
Fixes: 211565b100 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113092629.60226-1-kkartik@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcc7ba6688 upstream.
Currently in omap_8250_shutdown, the dma->rx_running flag is
set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync
is called, which is a runtime resume call stack which can
re-set the flag. When the call omap_8250_shutdown returns, the
flag is expected to be UN-SET, but this is not the case. This
is causing issues the next time UART is re-opened and
omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync
before the omap_8250_rx_dma_flush.
cc: stable@vger.kernel.org
Fixes: 0e31c8d173 ("tty: serial: 8250_omap: add custom DMA-RX callback")
Signed-off-by: Bin Liu <b-liu@ti.com>
[Judith: Add commit message]
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166105c903 upstream.
The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with
the F81216H, but does not support RS-485 auto-direction delays on any port.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d610020f03 upstream.
During wear-leveing work, the source PEB will be moved into scrub list
when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong
for non-scrub type source PEB. The problem could bring extra and
ineffective wear-leveing jobs, which makes more or less negative effects
for the life time of flash. Specifically, the process is divided 2 steps:
1. wear_leveling_worker // generate false scrub type PEB
ubi_eba_copy_leb // MOVE_RETRY is returned
leb_write_trylock // trylock failed
scrubbing = 1;
e1 is put into ubi->scrub
2. wear_leveling_worker // schedule false scrub type PEB for wl
scrubbing = 1
e1 = rb_entry(rb_first(&ubi->scrub))
The problem can be reproduced easily by running fsstress on a small
UBIFS partition(<64M, simulated by nandsim) for 5~10mins
(CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following
message is shown:
ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165
Since scrub type source PEB has set variable scrubbing as '1', and
variable scrubbing is checked before variable keep, so the problem can
be fixed by setting keep variable as 1 directly if the source LEB cannot
be locked.
Fixes: e801e128b2 ("UBI: fix missing scrub when there is a bit-flip")
CC: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff6cdc407f upstream.
The erratum_1386_microcode array requires an empty entry at the end.
Otherwise x86_match_cpu_with_stepping() will continue iterate the array after
it ended.
Add an empty entry to erratum_1386_microcode to its end.
Fixes: 29ba89f189 ("x86/CPU/AMD: Improve the erratum 1386 workaround")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241126134722.480975-1-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
