Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API. This is also a prerequisite to enable high color
depth and FRL support.
Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state. As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable(). The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock. But this is only applicable
for default color depth of 8 bpc. For higher depths, the output clock
is further divided by the hardware according to the formula:
output rate = PHY PLL rate * 8 / bpc
Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.
Take color depth into consideration before deciding to switch DCLK
source.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-1-3d3eed00a6db@collabora.com
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251110075817.1159857-1-damon.ding@rock-chips.com
Increase arena test coverage.
Convert glob_match() to bpf arena in two steps:
1.
Copy paste lib/glob.c into bpf_arena_strsearch.h
Copy paste lib/globtests.c into progs/arena_strsearch.c
2.
Add __arena to pointers
Add __arg_arena to global functions that accept arena pointers
Add cond_break to loops
The test also serves as a good example of what's possible
with bpf arena and how existing algorithms can be converted.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251111032931.21430-1-alexei.starovoitov@gmail.com
The P3509 carrier board does not connect the ID GPIO. Prior to this, the
GPIO role switch driver could not detect the mode of the OTG port.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The USB Micro-B port on p3450 is capable of OTG and doesn't need to be
hardcoded to peripheral. No other supported Tegra device is set up like
this, so align for consistency.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra X1 chip contains a NVJPG accelerator capable of
encoding/decoding JPEG files in hardware. Complete its DT node
and enable it.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the NVJPG power-domain node in order to support the NVJPG
accelerator in Tegra210 platforms.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interrupts for Tegra234 USB wake events to support the USB wake-up
function.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 L4T bootloader RAM training will corrupt the in-RAM kernel
DT if no reserved-memory node exists. This prevents said bootloader from
being able to boot a kernel without this node, unless a chainloaded
bootloader loads the DT. Add the node to eliminate the requirement for
extra boot stages.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 L4T bootloader RAM training will corrupt the in-RAM kernel
DT if no reserved-memory node exists. This prevents said bootloader from
being able to boot a kernel without this node, unless a chainloaded
bootloader loads the DT. Add the node to eliminate the requirement for
extra boot stages.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The other engines are already enabled, finish filling out the media
engine nodes and power domains.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The APB DMA controller node is currently named "dma@60020000", but
according to the DT bindings the node name should be "dma-controller".
Update the node name to match the binding and fix dtbs_check warnings.
Signed-off-by: Nino Zhang <ninozhang001@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra210.dtsi:31.3-41: Warning (interrupt_map): /pcie@1003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@50041000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra194.dtsi:2391.4-42: Warning (interrupt_map): /bus@0/pcie@14100000:interrupt-map:
Missing property '#address-cells' in node /bus@0/interrupt-controller@3881000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra186.dtsi:1355.3-41: Warning (interrupt_map): /pcie@10003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@3881000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra132.dtsi:32.3-41: Warning (interrupt_map): /pcie@1003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@50041000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds OPP tables for ACTMON and EMC, enabling dynamic frequency
scaling for system memory.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe the
hardware interconnection.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This enables the action monitor to facilitate dynamic frequency scaling.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The name of the enable_gpio member in struct rockchip_hdmi_qp is too
generic, as initially "borrowed" from downstream BSP code. Moreover,
this hasn't been really in use so far, since there is neither a DT
providing an "enable-gpios" property to any of the "hdmi" nodes, nor a
binding documenting it.
The actual purpose of this GPIO line is to control the voltage bias for
the HDMI TX data lines when switching between TMDS and FRL operating
modes.
A previous patch introduced the "frl-enable-gpios" property of the
RK3588 HDMI TX Controller binding, hence pass the updated string to
devm_gpiod_get_optional(), rename the struct member accordingly and set
it to a low level.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-3-laurent.pinchart@ideasonboard.com
Add an optional property to RK3588 HDMI TX Controller binding describing
a GPIO line to be asserted when operating in HDMI 2.1 FRL mode and
deasserted for HDMI 1.4/2.0 TMDS.
This is used to control an external voltage bias for HDMI data lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-2-laurent.pinchart@ideasonboard.com
Bugfixes:
* Various fixes when using NFS with TLS
* Localio direct-IO fixes
* Fix error handling in nfs_atomic_open_v23()
* Fix sysfs memory leak when nfs_client kobject add fails
* Fix an incorrect parameter when calling nfs4_call_sync()
* Fix a failing LTP test when using delegated timestamps
-----BEGIN PGP SIGNATURE-----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=7pf4
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Various fixes when using NFS with TLS
- Localio direct-IO fixes
- Fix error handling in nfs_atomic_open_v23()
- Fix sysfs memory leak when nfs_client kobject add fails
- Fix an incorrect parameter when calling nfs4_call_sync()
- Fix a failing LTP test when using delegated timestamps
* tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix LTP test failures when timestamps are delegated
NFSv4: Fix an incorrect parameter when calling nfs4_call_sync()
NFS: sysfs: fix leak when nfs_client kobject add fails
NFSv2/v3: Fix error handling in nfs_atomic_open_v23()
nfs/localio: do not issue misaligned DIO out-of-order
nfs/localio: Ensure DIO WRITE's IO on stable storage upon completion
nfs/localio: backfill missing partial read support for misaligned DIO
nfs/localio: add refcounting for each iocb IO associated with NFS pgio header
nfs/localio: remove unecessary ENOTBLK handling in DIO WRITE support
NFS: Check the TLS certificate fields in nfs_match_client()
pnfs: Set transport security policy to RPC_XPRTSEC_NONE unless using TLS
pnfs: Fix TLS logic in _nfs4_pnfs_v4_ds_connect()
pnfs: Fix TLS logic in _nfs4_pnfs_v3_ds_connect()
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
-----BEGIN PGP SIGNATURE-----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=VOqX
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
The error that returned by ftrace_set_filter_ip() in register_fentry() is
not handled properly. Just fix it.
Fixes: 00963a2e75 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251110120705.1553694-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are a few places where log level is not checked before calling
"verbose()". This forces programs working only at
BPF_LOG_LEVEL_STATS (e.g. veristat) to allocate unnecessarily large
log buffers. Add missing checks.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114200542.912386-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current kernel doesn't handle unpopulated cgroups any special
regarding reclaim protection. Furthermore, this wasn't a case even when
this was introduced in
bf8d5d52ff ("memcg: introduce memory.min")
Drop the incorrect documentation. (Implementation taking into account
the inner-node constraint may be added later.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The protection target is necessary to understand how effective reclaim
protection applies in the hierarchy.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
for 6.18, please pull the following:
- Andrea assigns clocks rates for the Ethernet controller for the
Raspberry Pi 5 systems
- Laurent adds an ethernet0 alias to allow client programs consuming
that alias to populate the correct Ethernet address for the Raspberry
Pi 5 systems
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmkLl74ACgkQh9CWnEQH
BwSpVRAAqrOwv98RkKxbWX6GTaTae3tL6b7jfhtjNKsY5uSaGzAzlJAUs0+czshG
OiRC7orymNKVeQoIrrp/+73BjNN0cJXDesvBu3tSbbYS6IwkQQmwkUUf9QBDY1jK
ndpRKWj7iotA5H1RTiCduloh6cp1MRL+b3wb5LCySid4PCtXcpZufeJkkLSB4MlL
IS7fnRltRtMaBFI92lU/W718sLorH1QewdAfubxTysg07a2rlfZZPeVCQ4sFmntt
LDP0AZvyxFSA7942GynWcZniP8cw6mfj+JyZxZgaKBK34438iDRcYzuPpT3zNv6k
xL1NMqY0ZrE7NIIOXosdUB7BdsQLN+bgOsQOVWz4iMoPB4cLSHjg20kXrOXzUIKh
IC3WBXzW4oYNlqq9k1IjJ2oxtbrukaF/b0jf2TWs7VOKHUIVjYO+imgs1ofw/krT
oPQuXTZrBBnjxPbt0DdQCqnoHqXfZ0Sr/6WqCNLpeOxS0AWqpJsHywg+A5RgTYrJ
pFrDJ0tQuwUVdRTxf5sDoJ1TV2u3U4uq/LWVTA0s1IxCus6ifawKQNJBxEBGm+dj
QmmEuNWzNtmjfJIeYBDFfTkeDmFGn1J3zLbwQ0zQmuut5BuwOkaR5PWTQQj/oDm8
G4jXoUwAvxQHvpx9ESO9kxHS2sck2pxJcp+aseS5uDUM5xiGA3A=
=cj42
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=MR10
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/devicetree-arm64-fixes-v2' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Andrea assigns clocks rates for the Ethernet controller for the
Raspberry Pi 5 systems
- Laurent adds an ethernet0 alias to allow client programs consuming
that alias to populate the correct Ethernet address for the Raspberry
Pi 5 systems
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes-v2' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Stefan ensures that the clk-raspberrypi driver which is now the clock
provider is built into the kernel image to satisfy root over NFS
-----BEGIN PGP SIGNATURE-----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=vB8/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zJLd
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64 defconfig updates for 6.18,
please pull the following:
- Stefan ensures that the clk-raspberrypi driver which is now the clock
provider is built into the kernel image to satisfy root over NFS
* tag 'arm-soc/for-6.18/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Fix V3D deferred probe timeout
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the buddy lockup detector, smp_processor_id() returns the detecting CPU,
not the locked CPU, making scx_hardlockup()'s printouts confusing. Pass the
locked CPU number from watchdog_hardlockup_check() as a parameter instead.
Also add kerneldoc comments to handle_lockup(), scx_hardlockup(), and
scx_rcu_cpu_stall() documenting their return value semantics.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
bpf_try_get_buffers() returns one of multiple per-CPU buffers based on a
per-CPU nesting counter. This mechanism expects that buffers are not
endlessly acquired before being returned. migrate_disable() ensures that a
task remains on the same CPU, but it does not prevent the task from being
preempted by another task on that CPU.
Without disabled preemption, a task may be preempted while holding a
buffer, allowing another task to run on same CPU and acquire an
additional buffer. Several such preemptions can cause the per-CPU
nest counter to exceed MAX_BPRINTF_NEST_LEVEL and trigger the warning in
bpf_try_get_buffers(). Adding preempt_disable()/preempt_enable() around
buffer acquisition and release prevents this task preemption and
preserves the intended bounded nesting behavior.
Reported-by: syzbot+b0cff308140f79a9c4cb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68f6a4c8.050a0220.1be48.0011.GAE@google.com/
Fixes: 4223bf833c ("bpf: Remove preempt_disable in bpf_try_get_buffers")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Link: https://lore.kernel.org/r/20251114064922.11650-1-chandna.sahil@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A few standard fixes here, plus one more interesting one from Hans which
addresses an issue where a move in when we requested GPIOs on ACPI
systems caused us to stop doing pinmuxing and leave things floating that
we'd really rather not have floating.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkXP5oACgkQJNaLcl1U
h9AaBwf8DS6cv1xTWZw9YNXWgqr09UcK8ISniIIaS8h8+AZ+uWX0NFpRjMegIyUq
TQTGkSqlIF+qSslkso+lWcYRblrUmQuLzDPOCHbDqpa2Dckio8fvVbyN9dV7sk4m
4pqteHdPF8HIbys0aZvB4gPl4n8SR77Q2t9zrx7Ey6ZMOQn+AxwkxDeF6ZwMkA6W
FBZ1uY2O063IMVv4Bx79jEIlGMrWxWzQVEK8MvK10ZBp5ds8DzyflHmYEUIGr5t2
/fxqSHT8RNLnOeffI9Lch0XN3VIJ7b7Yo8hOzFzc4rdMjmtB2AtdWx6hFr2Yb99F
1rtq495LIBaGojcyfJoqVpCb+lK3KA==
=nO9q
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few standard fixes here, plus one more interesting one from Hans
which addresses an issue where a move in when we requested GPIOs on
ACPI systems caused us to stop doing pinmuxing and leave things
floating that we'd really rather not have floating"
* tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add TODO comment about ACPI GPIO setup
spi: xilinx: increase number of retries before declaring stall
spi: imx: keep dma request disabled before dma transfer setup
spi: Try to get ACPI GPIO IRQ earlier
This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCaQPo1RwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGm/d4A/3wtf6Pvwg9TWI93klwL
dzGM/H/Tp7H/e9Hgx62774h9AP0V/HWc/zUP71bNdXJ5XXt5UDenxyX7Zwi6W4jU
uYMDBg==
=W+qi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkXmUAACgkQmmx57+YA
GNl6bw//QSCsTHTznD7Grd3pgHOw14NxwYBCGU/IifdxAo93DHkjGxsb643Z0UdZ
SBfnAX9JmSm4IGlxu597M7VyNGtQ8upXSSoWARaRgdfP/um0h8kq345pnZafy7q3
ShXsjLgZHYCWSyVHLabbrY9vWgYqLWopQ8oTDLhJ5CtwLlnLLqZW+nPpAgqsBR5F
diiygILOzURFPNX7jxHk7WBZb5MmDTNjjXPAoqUkLqbEJ2+TTAVjdys6eMNPTRcf
IjhAjpKiR4fOQnMOkTXII+lg9Jy40vgPXfeg86CCnjhWzRKhWezP/FEAxNpvgfse
8dbC0sw5kvDVGfQDjTBQQLmXvO0QtRHMQdxTxdJAuv2LLXXf6GgMD5PmEZJErb17
og8tjsQIwqBmOlRh6p/2cobxeR+JwgNMaPx8yWykME17rjDX2DLSipctl6X3tq1K
1gBeYCscQitDbRqPIy+OnpZ3D4K36Ucl3i3MSjGYcMUeSGA/i3cjYlas5O3g7Jvz
rEbpafNoO6QHylCHZ6xgJHeQzzHb8KAdUohas5qVdwz9TMBdsChC0e4RNiiFLfN3
DSPjdJxyTa4OFKYihJwjMe4HZqrGP4YsqcMFeiU0IR0fVQy93eBp4WWZUe5jd5+w
Z/gCJ5elKCPKexPjPDbkc0cvELRlVSael6gVSAb03rYcchaK69Q=
=lSRq
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
First batch of ASPEED fixes for 6.18
This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.
* tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: fuji-data64: Enable mac3 controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a simple fix to mark the Ethernet PHY on Jetson Xavier NX
as a wakeup source so the device can support WoL.
-----BEGIN PGP SIGNATURE-----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=vGwJ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.18-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Fixes for v6.18
This contains a simple fix to mark the Ethernet PHY on Jetson Xavier NX
as a wakeup source so the device can support WoL.
* tag 'tegra-for-6.18-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Mark Jetson Xavier NX's PHY as a wakeup source
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkXPkEACgkQJNaLcl1U
h9BXIQf/Ukhvnq+eZSkfaKByc/K6Xjm/zCnFeSg+eAuvEKMSG7AardtIFPYiaudD
Ck6HLstOZ1T+3u75sfFTohSJlkokV9KojcvtbGpDrYM/937ZhPCtf8kcieZw03QQ
upMRSJySetkkrOOrJhXoE5rvL7b2dLultQMR3haJ6sshE41UU0+EcfCB6+Z6oPfc
d8Yf45J2TngMb5GD8DNxbdGX8TznRyMFMyUo6lVX3r1z+dEUTbQFOdYTQaZp9job
XUQwt24MsG3w69MQnfe0Dr+Qa7TtZx8Cnyz0i0xcSfyHOmgwUiz/NJz6BUi0chpH
J4O37MpvWSoDz6YFEe+BH7oaQkwRfg==
=gy41
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator"
* tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: fix GPIO descriptor leak on register failure
A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks
-----BEGIN PGP SIGNATURE-----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=Mj01
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw; Typo fix in the changelog ]
Link: https://patch.msgid.link/3932581.kQq0lBPeGt@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Typo fix in the changelog ]
Link: https://patch.msgid.link/2040585.PYKUYFuaPT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>