Add wrapper macros for ACQUIRE()/ACQUIRE_ERR() and runtime PM
usage counter guards introduced recently: pm_runtime_active_try,
pm_runtime_active_auto_try, pm_runtime_active_try_enabled, and
pm_runtime_active_auto_try_enabled.
The new macros should be more straightforward to use.
For example, they can be used for rewriting a piece of code like below:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if ((ret = ACQUIRE_ERR(pm_runtime_active_try, &pm)))
return ret;
in the following way:
PM_RUNTIME_ACQUIRE(dev, pm);
if ((ret = PM_RUNTIME_ACQUIRE_ERR(&pm)))
return ret;
If the original code does not care about the specific error code
returned when attepmting to resume the device:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
return -ENXIO;
it may be changed like this:
PM_RUNTIME_ACQUIRE(dev, pm);
if (PM_RUNTIME_ACQUIRE_ERR(&pm))
return -ENXIO;
Link: https://lore.kernel.org/linux-pm/5068916.31r3eYUQgx@rafael.j.wysocki/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3400866.aeNJFYEL58@rafael.j.wysocki
If interrupted by a signal clock_nanosleep() returns the remaining time
into the structure pointed to by the rmtp parameter. So far this
functionality was not tested by the timer selftests.
Extend the nanosleep selftest to cover this feature.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251106-nanosleep-rtmp-selftest-v1-1-f9212fb295fe@linutronix.de
Several tests in the posix_timers selftest which test timer behavior
related to SIG_IGN fail on kernels older than 6.13. This is due to
a refactoring of signal handling in commit caf77435dd ("signal:
Handle ignored signals in do_sigaction(action != SIG_IGN)").
A previous attempt to fix this by adding a kernel version check to each
of the nine affected tests was suboptimal, as it resulted in emitting
the same skip message nine times.
Following the suggestion from Thomas Gleixner, this is refactored to
perform a single version check in main(). To satisfy the kselftest
framework's requirement for the test count to match the declared plan,
the plan is now conditionally set to 10 (for older kernels) or 19.
While setting the plan conditionally may seem complex, it is the
better approach to avoid the alternatives: either running tests on
unsupported kernels that are known to fail, or emitting a noisy series
of nine identical skip messages. A single informational message is now
printed instead when the tests are skipped.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250807085042.1690931-1-wakel@google.com/
Link: https://patch.msgid.link/20251103114502.584940-1-wakel@google.com
Get rid of the forward declarations of the mitigation functions by
moving their single caller below them.
No functional changes.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20251105200447.GBaQut3w4dLilZrX-z@fat_crate.local
Currently the set_flags() of the function graph tracer has a bunch of:
if (bit == FLAG1) {
[..]
}
if (bit == FLAG2) {
[..]
}
To clean it up a bit, convert it over to a switch statement.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192319.117123664@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the option to have function graph tracer to ignore time spent
when a task is sleeping is global when the interface is per-instance.
Changing the value in one instance will affect the results of another
instance that is also running the function graph tracer. This can lead to
confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.950255167@kernel.org
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The option "graph-time" affects the function profiler when it is using the
function graph infrastructure. It has nothing to do with the function
graph tracer itself. The option only affects the global function profiler
and does nothing to the function graph tracer.
Move it out of the function graph tracer options and make it a global
option that is only available at the top level instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.781711154@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the option to trace interrupts in the function graph tracer is
global when the interface is per-instance. Changing the value in one
instance will affect the results of another instance that is also running
the function graph tracer. This can lead to confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.613867934@kernel.org
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The generic test for CC_CAN_LINK assumes that all architectures use -m32
and -m64 to switch between 32-bit and 64-bit compilation. This is overly
simplistic. Architectures may use other flags (-mabi, -m31, etc.) or may
also require byte order handling (-mlittle-endian, -EL). Expressing all
of the different possibilities will be very complicated and brittle.
Instead allow architectures to supply their own logic which will be
easy to understand and evolve.
Both the boolean ARCH_HAS_CC_CAN_LINK and the string ARCH_USERFLAGS need
to be implemented as kconfig does not allow the reuse of string options.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-3-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
The command to invoke scripts/cc-can-link.sh is very long and new usages
are about to be added.
Add a helper variable to make the code easier to read and maintain.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-2-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
It is possible that the kernel toolchain generates warnings when used
together with the system toolchain. This happens for example when the
older kernel toolchain does not handle new versions of sframe debug
information. While these warnings where ignored during the evaluation
of CC_CAN_LINK, together with CONFIG_WERROR the actual userprog build
will later fail.
Example warning:
.../x86_64-linux/13.2.0/../../../../x86_64-linux/bin/ld:
error in /lib/../lib64/crt1.o(.sframe); no .sframe will be created
collect2: error: ld returned 1 exit status
Make sure that the very simple example program does not generate
warnings already to avoid breaking the userprog compilations.
Fixes: ec4a3992bc ("kbuild: respect CONFIG_WERROR for linker and assembler")
Fixes: 3f0ff4cc6f ("kbuild: respect CONFIG_WERROR for userprogs")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-1-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Several functions in kernel/time/tick-oneshot.c are missing parameter and
return value descriptions in their kernel-doc comments. This causes
warnings during doc generation.
Update the kernel-doc blocks to include detailed @param and Return:
descriptions for better clarity and to fix kernel-doc warnings. No
functional code changes are made.
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251106113938.34693-3-adelodunolaoluwa@yahoo.com
Add support for booting and using NVJPG on Tegra210 to the Host1x
and TegraDRM drivers. This driver only supports the new TegraDRM uAPI.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250630-diogo-nvjpg-v3-1-a553c7e91354@tecnico.ulisboa.pt
PCIe r7.0, sec 7.8.6, defines resizable BAR sizes beyond the currently
supported maximum of 128TB, which will require more than u32 to store the
entire bitmask.
Convert Resizable BAR related functions to use u64 bitmask for BAR sizes to
make the typing more future-proof.
The support for the larger BAR sizes themselves is not added at this point.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-12-ilpo.jarvinen@linux.intel.com
Use pci_rebar_get_max_size() to simplify amdgpu_device_resize_fb_bar().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-11-ilpo.jarvinen@linux.intel.com
Use pci_rebar_get_max_size() from PCI core in resize_vram_bar() to simplify
code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-10-ilpo.jarvinen@linux.intel.com
Add pci_rebar_get_max_size() to allow simplifying code that wants to know
the maximum possible size for a Resizable BAR.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-9-ilpo.jarvinen@linux.intel.com
PCI core provides pci_rebar_size_supported() and pci_rebar_size_to_bytes();
use them in resize_vram_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-8-ilpo.jarvinen@linux.intel.com
PCI core provides pci_rebar_size_supported() that helps in checking if an
encoded BAR Size is supported for the BAR or not. Use it in
i915_resize_lmem_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-7-ilpo.jarvinen@linux.intel.com
Many callers of pci_rebar_get_possible_sizes() are interested in finding
out if a particular encoded BAR Size (PCIe r7.0, sec 7.8.6.3) is supported
by the particular BAR.
Add pci_rebar_size_supported() into PCI core to make it easy for the
drivers to determine if the BAR size is supported or not.
Use the new function in pci_resize_resource() and in
pci_iov_vf_bar_set_size().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20251113180053.27944-6-ilpo.jarvinen@linux.intel.com
Fix the copy-pasted errors in the Resizable BAR handling functions kernel
doc and generally improve wording choices.
Fix the formatting errors of the Return: line.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-5-ilpo.jarvinen@linux.intel.com
pci_rebar_size_to_bytes() is in drivers/pci/pci.h but would be useful for
endpoint drivers as well.
Move the function to rebar.c and export it.
In addition, convert the literal to where the number comes from
(PCI_REBAR_MIN_SIZE).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-4-ilpo.jarvinen@linux.intel.com
Move pci_rebar_bytes_to_size() from include/linux/pci.h to rebar.c as it
does not look very trivial and is not expected to be performance critical.
Convert literals to use a newly added PCI_REBAR_MIN_SIZE define.
Also add kernel doc for the function as the function is exported.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <mjruhl@habana.ai>
Link: https://patch.msgid.link/20251113180053.27944-3-ilpo.jarvinen@linux.intel.com
For lack of a better place to put it, Resizable BAR code has been placed
inside pci.c and setup-res.c that do not use it for anything. Upcoming
changes are going to add more Resizable BAR related functions, increasing
the code size.
As pci.c is huge as is, move the Resizable BAR related code and the BAR
resize code from setup-res.c to rebar.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-2-ilpo.jarvinen@linux.intel.com
restore_dev_resource() copies saved addresses and flags from the struct
pci_dev_resource back to the struct resource, typically, during rollback
from a failure or in preparation for a retry attempt.
If the resource is within resource tree, the resource must not be
modified as the resource tree could be corrupted. Thus, it's a bug to
call restore_dev_resource() for assigned resources (which did happen
due to logic flaws in the BAR resize rollback).
Add WARN_ON_ONCE() into restore_dev_resource() to detect such bugs easily
and return without altering the resource to prevent corruption.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-12-ilpo.jarvinen@linux.intel.com
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the amdgpu driver.
Also remove the driver initiated assignment as pci_resize_resource() should
try to assign as much as possible. If the driver side call manages to get
more required resources assigned in some scenario, such a problem should be
fixed inside pci_resize_resource() instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-11-ilpo.jarvinen@linux.intel.com
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the i915 driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-10-ilpo.jarvinen@linux.intel.com
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the xe driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-9-ilpo.jarvinen@linux.intel.com
As pci_resize_resource() is meant to be used also outside of PCI core,
document the interface with kerneldoc.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-8-ilpo.jarvinen@linux.intel.com
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Freeing the saved list does not require holding pci_bus_sem, so the
critical section can be made shorter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-6-ilpo.jarvinen@linux.intel.com
Usually, resizing BARs requires releasing bridge windows in order to
resize it to fit a larger BAR into the window. This is not always the
case, however, FW could have made the window large enough to accommodate
larger BAR as is, or the user might prefer to shrink a BAR to make more
space for another Resizable BAR.
Thus, replace the check that requires that at least one bridge window
was released with a check that simply ensures bridge is not NULL.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-5-ilpo.jarvinen@linux.intel.com
Upcoming fix to BAR resize will store also device BAR resource in the
saved list. Change the pci_dev variable in the loop from 'bridge' to
'dev' as the former would be misleading with non-bridges in the list.
This is in a separate change to reduce churn in the upcoming BAR resize
fix.
While it appears that the logic in the loop doing pci_setup_bridge() is
altered as 'bridge' variable is no longer updated, a bridge should never
appear more than once in the saved list so the check can only match to the
first entry. As such, the code with two distinct pci_dev variables better
represents the intention of the check compared with the old code where
bridge variable was reused for a different purpose.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://patch.msgid.link/20251113162628.5946-4-ilpo.jarvinen@linux.intel.com
pci_rebar_set_size() adjusts BAR size for both normal and IOV BARs. The
struct pci_sriov keeps a cached copy of BAR size in ->barsz[] which is not
adjusted by pci_rebar_set_size() but by pci_iov_resource_set_size().
pci_iov_resource_set_size() is called also from
pci_resize_resource_set_size().
The current arrangement is problematic once BAR resize algorithm starts to
roll back changes properly in case of a failure. The normal resource
fitting algorithm rolls back resource size using the struct
pci_dev_resource easily but also calling pci_resize_resource_set_size() or
pci_iov_resource_set_size() to roll back BAR size would be an extra burden,
whereas combining ->barsz[] update with pci_rebar_set_size() naturally
rolls back it when restoring the old BAR size on a different layer of the
BAR resize operation.
Thus, rework pci_rebar_set_size() to also update ->barsz[].
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-3-ilpo.jarvinen@linux.intel.com
pbus_reassign_bridge_resources() saves bridge windows into the saved
list before attempting to adjust resource assignments to perform a BAR
resize operation. If resource adjustments cannot be completed fully,
rollback is attempted by restoring the resource from the saved list.
The rollback, however, does not check whether the resources it restores were
assigned by the partial resize attempt. If restore changes addresses of the
resource, it can result in corrupting the resource tree.
An example of a corrupted resource tree with overlapping addresses:
6200000000000-6203fbfffffff : pciex@620c3c0000000
6200000000000-6203fbff0ffff : PCI Bus 0030:01
6200020000000-62000207fffff : 0030:01:00.0
6200000000000-6203fbff0ffff : PCI Bus 0030:02
A resource that are assigned into the resource tree must remain
unchanged. Thus, release such a resource before attempting to restore
and claim it back.
For simplicity, always do the release and claim back for the resource
even in the cases where it is restored to the same address range.
Note: this fix may "break" some cases where devices "worked" because
the resource tree corruption allowed address space double counting to
fit more resource than what can now be assigned without double
counting. The upcoming changes to BAR resizing should address those
scenarios (to the extent possible).
Fixes: 8bb705e3e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com
Populate USB wake events for Tegra234 XUSB host controller.
These wake-up events are optional to maintain backward compatibility and
because the USB controller does not require them for normal operation.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add to the known supported SEV-SNP policy bits that don't require any
implementation support from KVM in order to successfully use them.
At this time, this includes:
- CXL_ALLOW
- MEM_AES_256_XTS
- RAPL_DIS
- CIPHERTEXT_HIDING_DRAM
- PAGE_SWAP_DISABLE
Arguably, RAPL_DIS and CIPHERTEXT_HIDING_DRAM require KVM and the CCP
driver to enable these features in order for the setting of the policy
bits to be successfully handled. But, a guest owner may not wish their
guest to run on a system that doesn't provide support for those features,
so allowing the specification of these bits accomplishes that. Whether
or not the bit is supported by SEV firmware, a system that doesn't support
these features will either fail during the KVM validation of supported
policy bits before issuing the LAUNCH_START or fail during the
LAUNCH_START.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/ec040de9864099cf592a97c201dc4cc110b2b0cf.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Supported policy bits are dependent on the level of SEV firmware that is
currently running. Create an API to return the supported policy bits for
the current level of firmware.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/e3f711366ddc22e3dd215c987fd2e28dc1c07f54.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add USB wake events for Tegra234 so that system can be woken up from
suspend when USB devices hot-plug/unplug event is detected.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Consolidate SEV policy bit definitions into a single file. Use
include/linux/psp-sev.h to hold the definitions and remove the current
definitions from the arch/x86/kvm/svm/sev.c and arch/x86/include/svm.h
files.
No functional change intended.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/d9639f88a0b521a1a67aeac77cc609fdea1f90bd.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=sIJv
-----END PGP SIGNATURE-----
Merge tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixlet from Jens Axboe:
"Been sitting on this one for a week or two, planning on sending it out
when there were other block changes for 6.18. But as that hasn't
materialized in the second week of sitting on it, let's flush it out.
A previous commit updated my git tree locations, but one was missed as
it was already set to the git.kernel.org one. But the git location swap
also renamed the actual tree from linux-block to just linux, let's get
that last one updated too"
* tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: correct git location for block layer tree
Conform the layout, informational and status messages to KTAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Enable the preset of filter parameters from kconfig options, similar to
how other KUnit configuration parameters are handled already.
This is useful to run a subset of tests even if the cmdline is not
readily modifyable.
Link: https://lore.kernel.org/r/20251106-kunit-filter-kconfig-v1-1-d723fb7ac221@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=sd1e
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
Simplify the code by removing local variable @inc. The variable is not
used elsewhere, remove it and directly increment the target number.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20251114075844.1315805-4-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>