mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
1,412,025 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
287df51938 |
TI K3 device tree updates for v6.19
Generic fixes and cleanups: * Multiple SoCs: Disable CPSW in SoC files and enable them in board files for better board-level control * Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards New Boards/SoM: * AM62L SoC and basic support for EVM * Toradex Aquila AM69 board support * Kontron SMARC-sAM67 module and ADS2 carrier board support Platform wide: * Define possible system states amd wakeup-source (AM62/AM62A/AM62P) SoC/EVM specific changes: AM62: * Add RNG node * Add OLDI support AM62P: * Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main) * Fix memory ranges for GPU AM62D2: * Enable PMIC support on EVM * Misc fixes AM64: * Add DMA support for TSCADC on EVM AM69: * Add Aquila board support with Clover variant J722S: * Fix audio refclk source in main dtsi * Explicitly use PLL1_HSDIV6 audio refclk for EVM J784S4/J742S2: * Add bootph-all tag to support PCIe boot Variscite VAR-SOM-AM62P: * Add support for ADS7846 touchscreen * Add support for WM8904 audio codec -----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQRQBrqaOmQ441h4YbUDQj8NV+8d1wUCaRsqDxAcdmlnbmVzaHJA dGkuY29tAAoJEANCPw1X7x3XFToA+gNkH7OUSDRjd9HzxMx4glX6M+xATZcnY/zE I1WUjnxtAQDR9gkHlpv1hm2IB1LFyQ4dDEElFCZfMrN/V00L/h9SDw== =WsF/ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgkCcACgkQmmx57+YA GNnyPxAAunaG14nwleV0GB1ksGEkaBxN5OG5Dk0DIL74xnJCWuldOmjJ4bm+ypvS X91ySxIXJ+sYGHDhu69tmVCKyl/6J7n9HYgMbumU5cVED01ptA53wCIamG1L/1sP g/HXTKhBtlWMaykIg8RX3ojs8imI1ZNsWIs+jy5lOquXS0vSnWi1AUp27adp9owv vi6fOaqPldkwhUSyxTBophrZJbfx+TiKIP74nMzmPX1gN7HimDy6UQm0VRsIv3lH rYEQSKSar+yMKGJ3vOgmwxnRYN9zx4uvDSumwgVeg5aDmInylWULWdzjy6Brflnx e4q8AkrgJEsq7R4jim04NvZXnGoVrX3i5xAkIhRH5agscRjaj5q6FqzRjxFE0mqU YV/oZVrxOEk27Sc6txyhFXXplG3GbOh3ABJpwVv+DWAEJTcIeTkM/24NHjHUKt+h PBss1MBBVyHJMLjpMUTiCFcW/YdFOUanVThFJZP87OnNz721sucl8Es+MlFIhuLw am8R7scBWvdVqL0I6hdleprLoT6wEk9YbDO6bEWWqz5n18C0qoakc4Pv2q5adNBO E6ydVhAbaWtk9ZhE3BpFJNQIs44NYnXpX46CrhCRpj96SA5KkVUoDlX9pZ5o/lqY EAuX1j/xG8gFxPxaTxCjYpTgJX2Dhhpg9WY5pX5eGJ9UNZAIe+c= =NYBr -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.19 Generic fixes and cleanups: * Multiple SoCs: Disable CPSW in SoC files and enable them in board files for better board-level control * Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards New Boards/SoM: * AM62L SoC and basic support for EVM * Toradex Aquila AM69 board support * Kontron SMARC-sAM67 module and ADS2 carrier board support Platform wide: * Define possible system states amd wakeup-source (AM62/AM62A/AM62P) SoC/EVM specific changes: AM62: * Add RNG node * Add OLDI support AM62P: * Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main) * Fix memory ranges for GPU AM62D2: * Enable PMIC support on EVM * Misc fixes AM64: * Add DMA support for TSCADC on EVM AM69: * Add Aquila board support with Clover variant J722S: * Fix audio refclk source in main dtsi * Explicitly use PLL1_HSDIV6 audio refclk for EVM J784S4/J742S2: * Add bootph-all tag to support PCIe boot Variscite VAR-SOM-AM62P: * Add support for ADS7846 touchscreen * Add support for WM8904 audio codec * tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (42 commits) arm64: dts: ti: k3-am62l: add initial reference board file arm64: dts: ti: k3-am62l: add initial infrastructure dt-bindings: arm: ti: Add binding for AM62L SoCs arm64: dts: ti: am69-aquila: Add Clover arm64: dts: ti: Add Aquila AM69 Support dt-bindings: arm: ti: add Toradex Aquila AM69 arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file arm64: dts: ti: k3-am65: disable "mcu_cpsw" in SoC file and enable in board file arm64: dts: ti: k3-am62: disable "cpsw3g" in SoC file and enable in board file arm64: dts: ti: k3-am62p5-sk: Set wakeup-source system-states arm64: dts: ti: k3-am62a7-sk: Set wakeup-source system-states arm64: dts: ti: k3-am62-lp-sk: Set wakeup-source system-states arm64: dts: ti: k3-am62p: Define possible system states arm64: dts: ti: k3-am62a: Define possible system states arm64: dts: ti: k3-am62: Define possible system states arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here arm64: dts: ti: k3-*: Replace rgmii-rxid with rgmii-id for CPSW ports arm64: dts: ti: k3-am642-tqma64xxl: add boot phase tags ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
c7cdc91603 |
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5) - Agilex5 updates: - Add GMAC0 for NAND daughter card - Add SMMU support - Add VGIC maintenance interrupt - Add L2 and L3 cache - Add support for the 013b board - Add I3C support - Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5 - Add support for Agilex3 board(a variant of the Agilex5 board) - dt-bindings update: - Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5 - Document Enclustra Mercury SA1 and AA1 boards - Document Agilex5 013b board - Document Agilex3 board - Fix dtbs_check warnings: - stratix10-swvp - Agilex(NAND and Clock manager) - Move sdmmc-ecc to base DTSI file(Stratix10) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmkbEaAACgkQGZQEC4Gj KPSl2BAAqGkAuKu0YyY91YuEDWnkqGEt5HGnhuTfemfCr2kBNAVMDrqroYB1Ou2W m1PHVwrl4U8U9mH1PFsozbbQU5MN+RhDo4GlydxfLlheW6nTlbmEOQWfoUArEgol 5ZHNvFw1j01Fhri+Zpa+L7ySrRXNVzftbFQaj9Hfr6QPLRU6cTATD3y32nYCj3e7 a2ttykSjG8u+T1DytCU1mvK3sXDTt1+E+gV9+YWbG81so45PsNybYobhNqTwGHcU bYY2FCqiB+Rn2tLOJrx1HzMxZ8b14dNxMire+2Lpi5/Zm8CIo+dP77szbE9LfyKp oIm6uzP3qtQINmeUUrCjn4KHUzh4KZnBUs1t0ayutC/Rh/79sa3cnD2+hq3jmU40 MgNQfMmwwmMIe7ZJo12HoAB9dy8p4huF17PznGn5LJxcgtVzB0wF9R2yeg8cxjVz Jlq6SN8c253iEyKYkOa1DC0zkHH+uHDSeXKlyVKe8vNNgcCLkoIZEXw2U6VGTRy9 aMvtfNwli3Lzm3JO7CV/BJ09bSbrDmn9halBizp4n1dA4NgLaDa2rBAj1S1vM9JT 7c3cwXGLlO1GR56hYEIVkD6DJHgZxETFtrgPnSPfgb9AEHg9BCQ6nkTKFQZz0e15 DTlDZf4pF2MnapxzDW9CiuEEfkHAZZK+x2IUYmoOrRwdEtG1yC8= =RGfQ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgj8IACgkQmmx57+YA GNnHghAAnfd19hyn4ZLP+3f7jv8AiYXoPwnRQxkpYqhHFcopkOyKYzYWpxGgMhvj ex2RRwv56a6VXy7D27J66WgH3zXrFMKZ1dthpUZ8j86HzZUW0XCutl2OSrXd440Q E8elSyH7Ewe8nxqV0o6Uoel0BxblHpYSV3/Pt+yYvg1IzZZwrTCditncI7kSdFPQ lrpNLxzRviobnVP4C+ee7jqmjpY6vM2KfACO0bFvgdSj+pt7efbVu6HKQtV6Orxz 42u6GiJLRXGXRYtXGWPzmTom5oSLRFlFbLtjDMgJoiyUVS13wmJVyb1OqVYgUxM1 5AVIn5ovMOTSPoVqoUJUCe0sctNvmzKV2gHc4EUtUhLInhJSRgJEDGBkDDUGhAg8 2OjRRwVRviQRzh7ANAoBciJbEzaU1vql+TXXw7ujj0qyfED6gPop33PnJuQ6IWdC 1M5JTi/Scvyjst7Aduth8JeEY4OOLjnuHnB32EsT90VPxVYSEwplUT+V04821keo teIwDjDTVUEkU5PzaFCz18pDRyxcsbqVbNnp70TJ5axAAPAJ+JiRbrwfM9QSZm25 jDASEXNuQ4LTKPplJiNKeYYgzCh69UQsT+rVTh+OFyL6VdpoIlYqmpzRQTaKvLZp UBiavYugBby57d2UkfW9mp3SpawI5lZub92KcRkROTSbZcL86+k= =pOrf -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.19 - Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5) - Agilex5 updates: - Add GMAC0 for NAND daughter card - Add SMMU support - Add VGIC maintenance interrupt - Add L2 and L3 cache - Add support for the 013b board - Add I3C support - Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5 - Add support for Agilex3 board(a variant of the Agilex5 board) - dt-bindings update: - Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5 - Document Enclustra Mercury SA1 and AA1 boards - Document Agilex5 013b board - Document Agilex3 board - Fix dtbs_check warnings: - stratix10-swvp - Agilex(NAND and Clock manager) - Move sdmmc-ecc to base DTSI file(Stratix10) * tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits) arm64: dts: socfpga: agilex5: update qspi partitions for 013b board arm64: dts: socfpga: add Agilex3 board dt-bindings: intel: Add Agilex3 SoCFPGA board arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers arm64: dts: socfpga: Add Agilex5 SVC node with memory region dt-bindings: firmware: svc: Add IOMMU support for Agilex5 arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes arm64: dts: socfpga: agilex5: Add L2 and L3 cache arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND arm64: dts: socfpga: agilex5: add support for 013b board dt-bindings: intel: Add Agilex5 SoCFPGA 013b board arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file ARM: dts: socfpga: add Enclustra SoM dts files dt-bindings: altera: removal of generic PE1 dts ARM: dts: socfpga: removal of generic PE1 dts dt-bindings: altera: add Mercury AA1 variants ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
976e33268c |
i.MX arm64 device tree changes for 6.19:
- New board support: Protonic PRT8ML, Toradex SMARC iMX95, Skov Rev.C HDMI, i.MX 95 Verdin Evaluation KitPHYTEC phyBOARD-Segin-i.MX91 board, Skov i.MX8MP variant - A series from Alexander Stein to clean up and improve imx95-tqma9596sa board support - Add MicIn routing support for mba8mx boards - A couple of patch sets from Frank Li to clean up dt-schema warnings and add more device support for imx8dxl and imx8qxp boards - A series from Ioana Ciornei to add FPGA based GPIO controller and SFP+ cages for layerscape boards - A change from Jan Petrous to add GMAC Ethernet for S32G2 EVB, RDB2 and S32G3 RDB3 boards - A series from Markus Niebel to improve imx95-tqma9596sa board support - A couple of changes from Martin Kepplinger-Novaković to enable cpuidle cooling device support for imx8mp - A series from Max Krummenacher to clean up todo and add thermal support for imx8-apalis board - A series from Primoz Fiser to add USB vbus regulators, jtag and pwm-fan overlay for imx93-phyboard - A couple of series from Richard Zhu to add supports-clkreq property and vpcie3v3aux regulator for PCIe M.2 device - A series from Stefano Radaelli to add WiFi, BT, PMIC, WM8904 audio, and ADS7846 touchscreen support for imx93-var-som - A series from Tim Harvey to make some cleanups for imx8mm-venice boards - A change from Xu Yang to add DDR Perf Monitor support for i.MX94 - Other small and random changes -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmkbFHAACgkQUFdYWoew fM5y0wf/YnC7hMRbEAI46n5iWqD0nUU/N8E4U5wjHMaOM+dak4c/Zc5UflcwHaih 1sk+Tqjf5rZPa6Wo3+ljjQMXihRMYsuhHX47x6000gojC1I/HyBxJ7jIEEw1wIcs iEBfneH6kcdLnEg8LAXXOBkqca4a5UEALj9KY3xIIgVqmZFzRE+c2dkqhPVhojWK fSKgiPHFiZA2ds2OatxloGwV5TCvR6LjpmZBIwpBzPlH6AGo8y4sb0S6T03YNzRg x2h+lR0WdACTDkOG7ntf0B+M/nWZLsO3tuMqowLtMbNdjkkp71fcaW6gmY1aeZaG PVJW88NQ235U38pSuPp1I190ehxsRg== =J5+d -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgjwQACgkQmmx57+YA GNm/Sg/+MqZwiNtbPQzrqWwJH0mgP1vHu/fTyOj4SyHVu+SN6N1Sj0/LOTN4ojAu MEhXuFZbutj7K5gOS1r6oSFrC9/CqnMVZCh+hjtLulCpF3Lww2Z1XEJ9OXc39WzE naQvUuaFm3QiJ26eHt2mjpMcoBN1XpBftkKcYReCaR4j7ommRq0u7fbhB4S6fvk0 pqJ5dYQC5QUc73Sf/uFX9nuai5m87f90ffH4XsT5FXV+dHjPFBesWnx+ndGiWr3i DGjQV3VwkB11pkdbGTP5B8nhtro8ChFilQgcafcb/z7VsvXkuJv1ZDPY4dgZ9TyT 8V/mxEVtfCfdSWCpSCa0h5rE0/XR9DYDnhPiz6fAXnr00MJ1MEuq/hkNyx07lGaA xAk+tfNNHFDL8AVTUmzLN29PkuNVxyEKlgUwwj4qiqMK+oE/ajbEKMfCg3SJN3G6 7paU+x8Abjlwyg0IKeXQwEu72LNRiDsFyMi3kUrAm0/i2Esw2leO4lfedPhpUIGo DAMP+j838XnzwtV2/hCBY98upQn4bjSG0T9LQrXSb4fF2ysU0+XnFR22Pr4FROuG kZPWO6uDir76sfE2C6N10Oc7uJxWIggSpO7qjtiTyx3rrSAcT3d672bEim8eBxgV mCU2P4pqrubQxF0ZMq1e91OwNCOqDHTsM44PKNIv8/EwVtdaL2E= =QJty -----END PGP SIGNATURE----- Merge tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.19: - New board support: Protonic PRT8ML, Toradex SMARC iMX95, Skov Rev.C HDMI, i.MX 95 Verdin Evaluation KitPHYTEC phyBOARD-Segin-i.MX91 board, Skov i.MX8MP variant - A series from Alexander Stein to clean up and improve imx95-tqma9596sa board support - Add MicIn routing support for mba8mx boards - A couple of patch sets from Frank Li to clean up dt-schema warnings and add more device support for imx8dxl and imx8qxp boards - A series from Ioana Ciornei to add FPGA based GPIO controller and SFP+ cages for layerscape boards - A change from Jan Petrous to add GMAC Ethernet for S32G2 EVB, RDB2 and S32G3 RDB3 boards - A series from Markus Niebel to improve imx95-tqma9596sa board support - A couple of changes from Martin Kepplinger-Novaković to enable cpuidle cooling device support for imx8mp - A series from Max Krummenacher to clean up todo and add thermal support for imx8-apalis board - A series from Primoz Fiser to add USB vbus regulators, jtag and pwm-fan overlay for imx93-phyboard - A couple of series from Richard Zhu to add supports-clkreq property and vpcie3v3aux regulator for PCIe M.2 device - A series from Stefano Radaelli to add WiFi, BT, PMIC, WM8904 audio, and ADS7846 touchscreen support for imx93-var-som - A series from Tim Harvey to make some cleanups for imx8mm-venice boards - A change from Xu Yang to add DDR Perf Monitor support for i.MX94 - Other small and random changes * tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (122 commits) arm64: dts: freescale: add Toradex SMARC iMX95 arm64: dts: freescale: tqma9352: Add vcc-supply for spi-nor arm64: dts: mb-smarc-2: Add MicIn routing arm64: dts: mba8xx: Add MicIn routing arm64: dts: mba8mx: Add MicIn routing arm64: dts: imx8mp: make 'dsp' node depend on 'aips5' arm64: dts: imx8mp: convert 'aips5' to 'aipstz5' arm64: dts: imx8mp-skov: add Rev.C HDMI support arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2 arm64: dts: freescale: Add GMAC Ethernet for S32G2 EVB and RDB2 and S32G3 RDB3 arm64: dts: imx8qm-apalis: add pwm used by the backlight arm64: dts: imx95-tqma9596sa-mb-smarc-2: add aliases for SPI arm64: dts: imx95-tqma9596sa-mb-smarc-2: remove superfluous line arm64: dts: imx95-tqma9596sa-mb-smarc-2: mark LPUART1 as reserved arm64: dts: imx95-tqma9596sa-mb-smarc-2: Add MicIn routing arm64: dts: imx95-tqma9596sa: add EEPROM pagesize arm64: dts: imx95-tqma9596sa: whitespace fixes arm64: dts: imx95-tqma9596sa: add gpio bus recovery for i2c arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for usdhci arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for i2c ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
e5060380e0 |
i.MX ARM device tree changes for 6.19:
- A bunch of dt-schema warning cleanup patches from Frank Li - A couple of imx6dl-yapp4 board update from Michal Vokáč to enable pwm-beeper and model the RGB LED as a single multi-led part - Enable PMIC RTC on imx53-qsrb board - Correct rtc compatible for imx6q-evi board - Add sy7636 support for e70k02 board - Replace license text comment with SPDX identifier for imx53-usbarmory board - Add I2S audio support for imx28-amarula-rmm board -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmkbD7kACgkQUFdYWoew fM5/zgf+N1SsNaLVnVvOYb2wt1CJw6yJhFm6/xGgCj8Xdg2rUSYlAVEeKb7DI4Fp n0ziuRAoGqse6XUyeYLjPzIzoHmS6oEBpiNyw9mt3JysRDW2CuQh6keslPxP07ng QcxK/CSwax5wtnzRsDeIm0fJw6o821rG0XP8BIMEutrUycgwUsscpZ2qQ4dwVjif /dhRDg/2SWG+9/rAS4C79bz5hmLbkKHyza/Dy9qN8L+hLxfb61XgMSdbVlmzJLx+ bZK1GP7mioE2s37dZA0ysiTUrbY8kL1z0vGovr/EDR32Orepk2k7vGg+AwBiGSFs Fjqong3fUiwpN1FZUZhegvgq1ORqUA== =hFql -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgjYsACgkQmmx57+YA GNkT8BAAhQ1n621YEwuiflNytmNt+GxrZke3DQ1jxl1hkzxKWLZZeUi0++aEQ0hK w9C+q4uKqmks64cQrgfzacUK0/ynkp6Iw7K819uo7c3Y4Ls3p3Y0OFHHzKrZKd0e XXYVVtg+rbxUzxj0YKM5irxEhJC5NqKlwREXZyvqu3oWl1yGdRoZhl0e7aFYOqfV NG4Era+ezjpfec8wTkf4LZjLgEH4CRB0ibxsEwEwK8J7kI/VJJ5DjsOzC5qM6lqu eHP1mY3KT3mAvAHdlluErg4BlazMSMEkyAF58aMtAaJ3xic0zeZPvYGd9JBQRb2e kSyw/Vr1epUxe3kfTpwwfKcuSO2VAX9tiFVqy6CrNwjRrSgnoxOmntdtTvchNSYT N+TqO7uPrm4pr6fZQHCGZhsa+k6o/FLDl5x4ZlkwjI+EQEo//7duOcsIH/JHnbWC u0v/47du0NWA61Feke5LMHLd1PxmkdhiWh7adxp5+J+6wOyAMw1bDoEMQplIO6ar ZjkMYn25JDzTEKrDNY8arh68g6uDTEpgijC0l6x7sZO+mOk1jPUfsDVep+hcs998 8CyorlNEaQTf9jdeqIPYkbAoXwGx9QcVO+eY9pXBc+SyhVlg7u3OUTV1FDT12bB/ SLS43bOAaxDDiyHDzeSHbbPd5i+MfKmWzOv9dh3CKQTF6Q66W3w= =McSM -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.19: - A bunch of dt-schema warning cleanup patches from Frank Li - A couple of imx6dl-yapp4 board update from Michal Vokáč to enable pwm-beeper and model the RGB LED as a single multi-led part - Enable PMIC RTC on imx53-qsrb board - Correct rtc compatible for imx6q-evi board - Add sy7636 support for e70k02 board - Replace license text comment with SPDX identifier for imx53-usbarmory board - Add I2S audio support for imx28-amarula-rmm board * tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits) ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part ARM: dts: imx6dl-yapp43: Enable pwm-beeper on boards with speaker ARM: dts: imx: e70k02: add sy7636 ARM: dts: imx28-amarula-rmm: add I2S audio ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115 ARM: dts: imx7ulp: remove bias-pull-up ARM: dts: remove undocumented clock-names for ov5642 ARM: dts: add device_type for memory node ARM: dts: Add bus type for parallel ov5640 ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731 ARM: dts: imx6qdl-skov-cpu fix typo interrupt ARM: dts: imx: remove redundant linux,phandle ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen ARM: dts: imx: add power-supply for lcd panel ARM: dts: imx6qdl-nitrogen6_max: rename i2c<n>mux to i2c ARM: dts: imx6ull-phytec-tauri: remove extra space before jedec,spi-nor ARM: dts: imx6q-utilite-pro: add missing required property for pci ARM: dts: imx6-tbs2910: rename ir_recv to ir-receiver ARM: dts: imx6: remove pinctrl-name if pinctrl-0 doesn't exist ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
e828dff381 |
Allwinner device tree changes for 6.19
The A523 family gains support for I2S and SPDIF audio interfaces, as well as the GMAC200 Ethernet controller. The H616 gains support for the NAND controller. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmkZfdQQHHdlbnNAa2Vy bmVsLm9yZwAKCRA4mlQhnA8kMKKbD/9bETTswOzUEUIVzp3zXMnNSfraZzfqokoo Qz9MhJLzP7GdWf+6db9Epjk68zA7InEgVDW5hgxELFzxkb+wfgZ9ALP+2d1t/4vB yod+T1hIovproOKlthSMHUjKm4AtydSvwlhQdQnSwPOcOoTf8+oU0FWThVnb46ek jMyWoNrljN6IWrMyj+mlvsuqOAFBJRuhntgwwCyP51lgYiOp2L5SV4Eytl97MbWp 2o05tFGB8GfYWRjy6Et9aq1Fb0sgrtj4WsbhGam+YkIvatWoXRxZxr/69CkoPx1/ SiAEKdky1S4eqH7KIiPnlSiy4n0Bh3m2CUZXYLwH1gMt7NKmbQRhLI98CcDHV6Iy 8pMiOkn7JykFOekbSs2q8yAZ69NNstIvlm8QsAHp8QgODHnu5xM9EWxeauICePQA 0fyQ3VTxv4vQeDvRzvM1was0plgoLDopHmbCt++vQWxuGS0tr/iAVZUqHZboB7qX duy5l5MmnaKZuM+VMT+zcKB56WHJhvMrmbI/2DixgP+tp0RNDj/VSF2rCkaPMg+q 6Fm+P9KxTeBpGWQsZTEi9UOenIYdSk0GOOeOaUs70sQdX/wtgG/B6N6oKf3u6Rjb 2I/C1MltraLaj4J0MjxHImF2JoZvq28YHFiuxWIioj6WJaKENUwSfHsezmrooIzQ iv8oLPtqcA== =dBsI -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgjVUACgkQmmx57+YA GNlz9Q//T+UuWSK9Sq5D3pFQ3A3qpO4Iu/9OAu9YvN2TRZYG6t7Y9xpC448I1plC 3bha1EUzSKnIhUVR4oWM9x80hKSnTWJ/kMeeMLJkUsEZklDhS1lsRLTyVz7v71Jr t+V6d4/O9UcwuKbCVAO4nDlYFGVUl/pVXwa/IdDRYWpTl1s3wlSyl9PF4wruFWqA 6yRgZDdDwzptpWT7L0gZDeM87ke8xy+ozsSRXarIlu1Q/sdc9u2SjpRLWS9Sep/j 8h0Txhf5YurR6EXz7C6Pn2hmAn7AsNU1wD0lWSEoBMQFhsbWxrMp2Y5E8ZSbtBow yHP9nxSt9gIpph5W15LPRhkue2721Vg3wxWYFj664Mi/2iphnrj54/Ayb7sJ1tYN n7cWGE1vTFXom9ipkebjO4aw63GvuSjnTNVUVo+j3RiBO2M3uP9Mhnc+Mlau8ElN DdiJtpU5Pk+0UWhzG1MgL8KARwVnGqedhdQ5iYhphW1cNi27KJnj1J7ThvT9RC51 04GlGrGz16/RZZLzN+yZ3s+Uy/OmZBPz4fnwH0JIQEuOQDf78/JUaOg97gRFa2NM oyVe9w5MTjg3MY72qO3+OkceBSFQ2JHgTwgYgB0ELAzQJBAnELc+oIuL/46/3v26 BJTFOnRS3+4yoPZ6psmUfq7n5EDAc1fBQroaSjncuKL61vEfu8k= =QrZO -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.19 The A523 family gains support for I2S and SPDIF audio interfaces, as well as the GMAC200 Ethernet controller. The H616 gains support for the NAND controller. * tag 'sunxi-dt-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a523: Add SPDIF TX pin on PB and PI pins arm64: dts: allwinner: a523: Add I2S2 pins on PI pin group arm64: dts: allwinner: a523: Add device nodes for I2S controllers arm64: dts: allwinner: a523: Add device node for SPDIF block arm64: dts: allwinner: a523: Add DMA controller device nodes dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatibles for A523 arm64: dts: allwinner: h616: add NAND controller arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port arm64: dts: allwinner: a523: Add GMAC200 ethernet controller Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
252f83d547 |
arm64: tegra: Device tree changes for v6.19-rc1
This contains a bunch of additions and improvements for older devices. Tegra210 devices now have empty reserved-memory nodes to improve inter- operability with certain bootloaders. These chips now also support more multimedia engines. A new variant of the Jetson Nano is also added. Jetson TX2 sees some improvements. PCI endpoint mode is improved for Tegra234 so that reset interrupts are properly routed. A new RTC device is added starting with Orin. Rounding things off is a flurry of small fixes for DT validation and USB OTG mode. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmkYPjwACgkQ3SOs138+ s6FRXQ//Wvj9R+OgSu1egYc2CGPkM5LHxCWnqf7r80EbW020Vp9WuiFPJjsNgBpf nICaKYS5Yc4JuN1ayqa8YjNhjTy7FuuVMszMPQ+q0MsjHXYbA6N4ubNMwKfQdWm7 KGI2aAm3/SVYSBIjBsU9hNbkRYh165izxOlga5mC3ZzBIkifMnxjMLPUtNedOpq2 pxXxrCZXrZ0WfVFnULOyQJ6kdDrpTh1HELPBUzCI8yCioU8JoG7zZz/llx3f0f07 zp+pIEacuwzYL0LR0frTUA9pENXHqa5ttq5VS8l2LWCEGkfc28aodu26/mvcZcV9 c6UOKrqwj9e7+AyR+tFKq8/w0CRenyuU9oRnr1DrBSKnpowc9kz8V9pyoisbd8MM u7ZehhFajZVg6QEPXkjF5iEWLj6zWwRrtQbmDrRV9FD35GA12uNyfgQe1p1M7mwE AuzRKS5hKosz8vZ/GINI+nQ8mXsWZTzDMN0QccPUJ37zlbh9leUIBY8n2Q7rGekO sOD1DS8Jivy3XSWl9gJ0OWdXoB2kEYzgbC2O6hV+46WPb6DQNWK8A9uZGs7oqJ17 L8dGYzFaELas/RKyjxU34XqPwsAYgjrVzpAK5kszqGP+W7FaVdgt9s4/dKVKmv5D 1m92my3vaOsGoxIt2ubSOb+hhUBK4yah5Sad5vm1JZaLkPSSuyw= =y8B/ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgi1EACgkQmmx57+YA GNm/DxAAkkP1d+cxi4q/sHLNjIG315rRnah9nQ6CIdG8UamcJEhuqKhw/aCR0UXd 2oeMfOEf/u0epNyRd+zqh9aTwI1cwLgRyFQVGp0+i4e6cVlDhZHqJMpAbCe3+0vk sQ3BoVqyLSe7svmBbjedVWMlia9kufZGxhEuOhQz2uYHjrVAocvBuIrh17wEBS6t zjdVI7fpD1zLVSEQv4LuaiZadjyb/PoEATaBujbBskSw9K3oaCv+y6T0u1aCppBL 4xVcARRblCTdxbSr8R3oQICKZTNLYHc7u+10eiDMZbTUfc40pHZe32HUdNcbI+G4 LsHg5SmrDi8ZLgZs2ZCm7a33QH5QMbD42K0jfFdeQNXu/iht4b3WjfjUaLkSSUF/ SIt6bI03Lmle9drIENThKZX7WpGQ7ejHujkRHJuWU7oJdab/tIT+3t4lfrOf+RLo cfLLzobi1GgNBstUJ14N7VsvEJn0c0nuNVTxfNlzmrzQO0ou4Pvq2u8nDYZ9eSwl T6Mray1XGLOyxYwtAz3clupwqitaiYQ8/mviFz2Yv26t7gCMJw2tEUSWTcvy8/mE 24l4FZ4nYONl/oyeKT8uqFHHUQ9Yhcqmp5b6dpHgN9vB3s/IqEoPzS1tF+PdDVHX I982r+UFJ1Zlo+TacJXiOLviMHIvPa9VloUlyNaQ7RFxfH/9aO8= =RdSU -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.19-rc1 This contains a bunch of additions and improvements for older devices. Tegra210 devices now have empty reserved-memory nodes to improve inter- operability with certain bootloaders. These chips now also support more multimedia engines. A new variant of the Jetson Nano is also added. Jetson TX2 sees some improvements. PCI endpoint mode is improved for Tegra234 so that reset interrupts are properly routed. A new RTC device is added starting with Orin. Rounding things off is a flurry of small fixes for DT validation and USB OTG mode. * tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX arm64: tegra: Set USB Micro-B port to OTG mode on P3450 arm64: tegra: Add NVJPG node for Tegra210 platforms arm64: tegra: Add Tegra210 NVJPG power-domain node arm64: tegra: Add interrupts for Tegra234 USB wake events arm64: tegra: Add reserved-memory node for P2180 arm64: tegra: Add reserved-memory node for P3450 arm64: tegra: Enable NVDEC and NVENC on Tegra210 arm64: tegra: Fix APB DMA controller node name arm64: tegra: Add default GIC address cells on Tegra210 arm64: tegra: Add default GIC address cells on Tegra194 arm64: tegra: Add default GIC address cells on Tegra186 arm64: tegra: Add default GIC address cells on Tegra132 arm64: tegra: Add OPP tables on Tegra210 arm64: tegra: Add interconnect properties for Tegra210 arm64: tegra: Add ACTMON on Tegra210 arm64: tegra: Add device-tree node for NVVRS RTC arm64: tegra: Move avdd-dsi-csi-supply into CSI node arm64: tegra: Drop redundant clock and reset names from TSEC node arm64: tegra: Move HDA into the correct bus ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
17aaeb67e1 |
ARM: tegra: Device tree changes for v6.19-rc1
Add more host1x devices on Tegra114 and Tegra124, as well as CSI for Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmkYO/AACgkQ3SOs138+ s6EeWQ//cnwzLFNnLIUrH73IEbxiamOaTdHcIZRdrVdGUK5bP79sdQZQVyzkGbUR kHWPi85QqiMj+Wk7oHNefKdSATVoUZXZRXbjRQtyHOjWRvsir+LspolI5HQMClA9 aVjgsPSELkBOqfJUNwxpbGtprLBQuZVr2e/Uum+DGvSC5rW6jIe9uEvUsPEMHZyU jxqosbdaylLEYcrF3+ThFENVO1H2Kg1FYGHIQoykYQyQPg+jI8wRAmiTrul4kzQA iBfsCGOUT/VPgktIcHKy6TBvmke+eOhWltlYm/n6XeXdLVzwoH6M0gmKQeHvZVgZ JGGrwF3u0PAbKcsogOgcIY3/t6VYAg9yJXMJHeopkoUgmOxBKva7sdXxeakz50fu FU0gyMZ7pWQtL5FSB6h87ichQ+PHOO0aAvesNmDCGR1YoHE+PbzXf0zs1MDAEjX2 ReJ0NGgK+z80wG1O4mjKhCfASkacJQxVViySqALTCAtxd0G3ffSOBwmfZYxIIi2O 8sgwLgx1Z1zeoJp/QBvm+yONiIQDbCpbNOYCusOeWZBLtYlNqyUsTkaxpCimoGNR 4xJdL1xloknDpqiByPj1grkQQos7J9YT4OdA1sUpfbzX/xDaaVe6NC0DtNFHM/4H rPnv8URtwA+0/esJLl3mok5KQ3kf9nY6jhsdfQ4Ai3rWuu5HQwM= =ecPk -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgisEACgkQmmx57+YA GNladBAAkwtBeQJO9NZsDNxmjQ66KnDEXJO55BrhvIxOZxC1pZz9mGw11Vzf3Pqf /tftBLn17OIfzyaY15JLwKUTLfdyA9FQXNuOMJcofn0xdRokA/mcuaKBHHNc/Ltm HJO5KLSiOBGsvlgXwwPSdEcNwmShgbqgymMudPFWQKsNuG16M9SVVm4xKjQdFPf6 DPeYCBmvuDA9MEcO+4O/m07lWkWnNM/eOJCb/x7DAwUpvR+QuBkjqOPRwPMfdtRi zoKS4p7a7F/xJp5PjqKFC1X3zhcmNob1Bha6Zf4X2zrWDTKGbqSgZYKeEBGGonp0 T67BGpIDvDSS7/WvXnpIzTd8JrEOUpF+j3TO0u/v7koq+djXGN6WazXAABuCmx8L TjtVfPPHerLgWKZXJ51VGG0AObgmBUiOoepYl9TEOhq/s4f+AMGnqRGTCAtae/Q6 a+htyz/SJVHanNDl2U2AOXEiWqggT6SwFRqJXQFs1YIMWDslA77XlAaunXNlw/oR SZE8I87Rkf3BQN9Mo7FH+xdrlj0BQ5rv6+Pp0GyacMmGuGYMIAI6fKnBB7ezWU6r Nes+tCz+aD4wHn2V45uRGH4OSyAReriMUwtUuyKOQPiWj501DQzg6pYlS43munKo VhznyZEuPhajOSP4BQHv0OqwJgnwyEyADrB1FTpu5ul3u07m50s= =4t4K -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.19-rc1 Add more host1x devices on Tegra114 and Tegra124, as well as CSI for Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added. * tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add device-tree for Xiaomi Mi Pad (A0101) ARM: tegra: add CSI nodes for Tegra20 and Tegra30 ARM: tegra: Add missing HOST1X device nodes on Tegra124 ARM: tegra: Add missing HOST1X device nodes on Tegra114 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
96710819d0 |
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
The macros IN_FROM_REG, TEMP_FROM_REG, and RPM_FROM_REG evaluate their arguments multiple times. These macros are used in lockless show functions involving shared driver data, leading to Time-of-Check to Time-of-Use race conditions. For example, RPM_FROM_REG checks if a value is 0 or 255, and then uses it in a division. If the value is modified by another thread to 0 after the check but before the division, it causes a divide-by-zero error. Convert these macros to static functions. This guarantees that arguments are evaluated only once (pass-by-value), fixing the race conditions. Adhere to the principle of minimal changes by only converting the specific macros involved in these lockless contexts. Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/ Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Link: https://lore.kernel.org/r/20251120041331.1917570-1-hanguidong02@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
|
|
5d5b665e3e |
dt-bindings: Changes for v6.19-rc1
Document various new IPs on older chips, as well as some existing developer kits that were missing compatible strings. Add power domain IDs on Tegra264 and wake-up support for the XUSB controller on Tegra234. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmkYOpMACgkQ3SOs138+ s6Egqg//bIex7+DYaxtSGkMepOJOlEKjcr981MWbkcsbgujBhIITZSBE9kQDUnQJ QkjGiBeW5gHRZDmg2SFCKLoS0CKwCco0pGepXt9+jTkjOf33hcgIw1/pmIRus0HB hF1x0qtA0J09mrsg3aF8z8qlJuhbSXfr+T3xrYYolzyO8i+8PPmnshu3PQv/WoTv AiB3XF5WVGuAD9PY1/Dy5yHy6e+TogP3nZBe0Cvxs+xyAubNNF+KMcsEm4NcdIDM USk/r58m99/gOyMbXZuxfkHwX1nKoEVT0SDqkoW+t9spb0rIiowGRAsvw00pOdN9 iMIJkivh1Eh74DTSoFRSmyYdsnwE52YceNpC9kgJ5k9AA8wB1Y3WPdh+Si+TgreG cUuLuvLMAhqMhSty34QcOMgeohAxlb7nbLI9keug1DVilaDYQtq/H4k7T6UpqxO/ bEyyhAIE5qgWKMAWGB+g40q6OVfrd8wB2fOvU73GvB1MhUQzIfMae+hqEBJJHddq fHKyOY80piwA6FFLYBS0hye0Fgs9qezkX4YevaObru/o+zwPNbnVtA9ZpRMV+2ng DQ6n0c7YZTUOeWQmSJvqCzsBws95VpQJPef4rdK1NDJWWdEH+6/QDQzqI3ChxttY jIniWsilxkqBntIBkzOW/5J0q/BiMI3FzBI6OrlEnYPv6ZUcP5U= =QUDS -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgifYACgkQmmx57+YA GNlZNhAAoPGm2JbTF8UgMs7IKWNS0fqONR7Que2Sc0nyOpXvTLWk6MwjTojybY/y k7ZF4hqjOeiTHV9R/Qdr2UG+jUYUIN0JoAbzgKQPKotjIal9/5inBJ1YBq7cbIl4 JaPhI1w1s0YjTghUilBBzF090lVdK5OfXnnihMj3eMcpCm/e5EY1VJpPOhi6I7PM WiWFe60f+LtlQNh/c8lj9xjkqCqTZRiQ+5n0JuL2gtY3HESu8OpwI8Fa5EnMQSHg rTAEK32ukm4c+6/JzQIVEoA6dlpmogDXTsT09Qv1dw5JH0e+5RHMBN813me8X+ex h+7k2awWXWqeDg5GML6arxuZfkPxJJSd6vuwe6EWC3YeP4/tfrAxTTogRhY7lIVR excLy+AOWUgdbpN/4xuMGOczdIWVcP32Diutxo2KuwkyZeW6OhWrQACHif2jZcAG hi8PaX2bo8xTSf9bHFNi+io+BkdfSP50vT7y8/UoyJ9+8SredI++ebRRtvjqNhfL 2D+9PE7Fk9wErpVIbUhbEQo1vCZsnSSmHWfUTS61jzraAG4Yb9R6gOwTJFpzg1dZ R9UA6n9KaniBvNJLhb+r53x3UHTUiTFBe2xC9H241lKwM9OnqYNQvU3b3kjZA2k0 oqtk7Ajadpm+BIPE4tDJ7G9WMBzx8iUHT7w9Krc2QmU7VOCrejY= =h8JE -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.19-rc1 Document various new IPs on older chips, as well as some existing developer kits that were missing compatible strings. Add power domain IDs on Tegra264 and wake-up support for the XUSB controller on Tegra234. * tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: usb: Add wake-up support for Tegra234 XUSB host controller dt-bindings: devfreq: tegra30-actmon: Add Tegra124 fallback for Tegra210 dt-bindings: display: tegra: Document Tegra20 and Tegra30 CSI dt-bindings: display: tegra: document EPP, ISP, MPE and TSEC for Tegra114+ dt-bindings: arm: tegra: Document Jetson Nano Devkits dt-bindings: power: Add power domain IDs for Tegra264 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
9481f1ce9b |
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaRcAkgAKCRCKwlD9ZEnx
cF89AP9Vkd0D3KNWvaGX8aKc7D0PQSPfhiE5YSLhmalIYd/HkwEAzEJTbBE6mOdB
HdSO2CdHQNRJ0ApFcEfwU4Pvr+dLYgA=
=lnh0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ioc1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
* tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC
arm64: dts: renesas: r9a09g057: Add RTC node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: r9a09g057: Add TSU nodes
ARM: dts: renesas: r9a06g032: Add the ADC device
arm64: dts: renesas: r9a09g087: Add GMAC nodes
arm64: dts: renesas: r9a09g077: Add GMAC nodes
arm64: dts: renesas: r9a09g087: Add ETHSS node
arm64: dts: renesas: r9a09g077: Add ETHSS node
arm64: dts: renesas: r8a779a0: Add GE7800 GPU node
arm64: dts: renesas: r8a77965: Add GE7800 GPU node
dt-bindings: clock: r8a779a0: Add ZG core clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
441bd15680 |
RISC-V SpacemiT DT changes for 6.19
- Add Uart and I2C nodes - Add P1 PMIC nodes - Add MusePi Pro board support - Add OrangePi R2S board support - Enable eeprom for BPI-F3 - Enable QSPI on BPI-F3 - Enable Ethernet and PDMA on OrangePi RV2 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQKvBAABCgCZFiEEtbq4ycMbcRVnAiPcMarqR1lNu+0FAmkVq/IbFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25z Lm9wZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXRCNUJBQjhDOUMzMUI3MTE1NjcwMjIz REMzMUFBRUE0NzU5NERCQkVEAAoJEDGq6kdZTbvtaFgP/ibSDS7gp+DxD0lZaPZg lJUIyrKeihNvJUlxnMSBzXhpLPFld8pU+syExKP4ZuPE7aw3kuRESrQdb2CP0hxK n1XE/MBfBYpHNBTUjy0QkLYGw++cTjKmvYtnwiv9szTFje5f0O15D3GJbyAFDfPN FE8VMWEgDO1WkVhHk0MT0gWhPouwHPepd5kBdqU17pr4Uys0ZlodDZ9YJjff1Xxa ZufFSpAt9B8nrbFCQzspQEoQa3um1J0vSBsJhcGsAjgByjANgh398eDeSDhiH47z jxRi1bl3KWDmnE2GyrC5CZ5LgUON6cBRTYvYwixKYX+nLhMZLG3EfFCdNtscVA53 7qK3dLutWSwIjBUbh3TCI4uyRKhYvBpmyI0UWb+nF25EITQkTVBAZhlExizkmupU wsZhoRS+5vrLRfjibhi+iP3Rqfx8YAPV+jwZIfmm/wTzpZt/uHkLaJ88J8Xa/clV EjQ6u8Mfcuv0VA9e5LW7ABBv/iy74libbYRRkf0ydRD+UOL7YOiwjvZ47JvWdbSg D9fo9iI9bDm3uYmSIlCs3jCGRmzdvWCAiZibLld44gSlqOjtNH1HPDtnHi/rI9sd uPeIbCXLZ2k/n9Yj6O5RH3Rtn99gpdXzshsXCBZwHJaXfnOT7CuSPBQpANLTNgKB 79hdj7oawQEmOyKxCJw+wU1K =9Ihp -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgiJIACgkQmmx57+YA GNnd5g//Vy+DwyBnBHs2XP4i2WMjEOqfkWyvs12zEhNdpIqPIf6c2eHeC3blxBy4 iytwykoTOqp0Me8gl3LXDDizTt/s9jzFkc0PvSholLO05hN9PnGk8qbN1Rwfsl8T enz/2W7oA5mcq0HJD5O0OECPOC1/0dmVM4lg/oOuZyaHRw5LL3r+jnyPIXh0QvNs tDVqzNmXXAqCRlJcc9nipapH4NbzRrDOBkk2LPAh/mFX0PWCMHA2aOyQ7YRqLFLU eCbxaW7E/3Dw3WCCvB0ASrb7MgtdilSIzUZbCkCzsvB4O4/jmO34hPs7ATcLP7u6 qpciJwVMTooQD7W4xe64jBrIkwzOhNjMDW0SXV5o1cOuzl0aoEz9XGC0zEy3muyX caLo8mCSyGWzmZPGPOP7GY/8w46GlZ5RMjc2UXxhxk+omRkydotjJTo53jFufoUZ XZd7SnCymuPhaAtUz+zLi9iwDgHsiD/yGdupgJRoZJKh9kG17CMLB3shMW61IEF/ va/V3uXtlv0Zzd69NAwSGLdEvRspa91e6NArSVhLP/gHrzNLqKEliFz0aaVm5ccM yufaTiKZdawuWQp5t+wR45q9/mm9KG0qrGDfnNzGtH38FSJF4KY+EKTPJ9IvtBw0 oRWiqORWb5Km8JDWzUb6fEdtA0l1vXvohPHAZtj1WAUN2EQwuFw= =gjoT -----END PGP SIGNATURE----- Merge tag 'spacemit-dt-for-6.19-1' of https://github.com/spacemit-com/linux into soc/dt RISC-V SpacemiT DT changes for 6.19 - Add Uart and I2C nodes - Add P1 PMIC nodes - Add MusePi Pro board support - Add OrangePi R2S board support - Enable eeprom for BPI-F3 - Enable QSPI on BPI-F3 - Enable Ethernet and PDMA on OrangePi RV2 * tag 'spacemit-dt-for-6.19-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: define all missing I2C controller nodes riscv: dts: spacemit: reorder i2c2 node riscv: dts: spacemit: Add OrangePi R2S board device tree dt-bindings: riscv: spacemit: Add OrangePi R2S board riscv: dts: spacemit: enable K1 SoC QSPI on BPI-F3 riscv: dts: spacemit: add MusePi Pro board device tree dt-bindings: riscv: spacemit: add MusePi Pro board riscv: dts: spacemit: add Ethernet and PDMA to OrangePi RV2 riscv: dts: spacemit: add i2c aliases on BPI-F3 riscv: dts: spacemit: add 24c02 eeprom on BPI-F3 riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3 riscv: dts: spacemit: define regulator constraints riscv: dts: spacemit: define fixed regulators riscv: dts: spacemit: enable the i2c8 adapter riscv: dts: spacemit: add UART pinctrl combinations Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
3350e81c62 |
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCaRMFRxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeIN8AP95ZFYLCHAQv8jYgBDlwfG6m6OPPFgo
5UlEzvGl5p6wfwD/Z53tiVKrOgmOTJzqCkcjeAq6SDzxwOuJmGE6rdXVlAo=
=7T95
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gbIc
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
* tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (27 commits)
arm64: dts: mediatek: mt7981b-openwrt-one: Enable software leds
arm64: dts: mediatek: mt7981b-openwrt-one: Enable SPI NOR
arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays
arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays
arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro
arm64: dts: mediatek: mt7988: Disable 2.5G phy and enable at board layer
dt-bindings: arm: mediatek: add BPI-R4 Pro board
arm64: dts: mediatek: Add GCE header for MT8196
arm64: dts: mediatek: mt7981b: Add reserved memory for TF-A
arm64: dts: mediatek: mt7981b: Configure UART0 pinmux
arm64: dts: mediatek: mt8365-evk: Enable GPU support
arm64: dts: mediatek: mt8365: Add GPU support
arm64: dts: mediatek: mt8395-genio-1200-evk: Describe CPU supplies
arm64: dts: mediatek: Add MT6878 pinmux macro header file
arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speed
arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510
arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuse
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
c4aee1ad41 |
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support for secondary cores bringup on this SoC. This also introduces basic support for a new machine, the MT6582 Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for booting into a initramfs with UART console output. -----BEGIN PGP SIGNATURE----- iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCaRL92hsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s bGFib3JhLmNvbQAKCRCaNgTPrZeEeAI/AQCBTyBT0oOvHrQm/ce2V3PKg4a5z0H6 jgItAPcKz0z5+wD+NJmQrcO7oxSLiBBYTQibAbp8EYjKR/r5kHOui0zy3gw= =Acch -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkgh4AACgkQmmx57+YA GNnniQ/9HqHCyHB7IxwYvqGqPIAnz+eGrVJqYLGB8KN8xq/B6BbLssO4B7GA/TbL oTHVLiaBNeuDj9qNXol0fcffPLhmqXcMO/3fgDpoKPzlEjix/LNfKcFiqzOwivRG h//ZlgL4J8Q72LlwUjmjkdAhxn3jwUD5kogqTfYCwsUEgVZDsA2qvAFZYmoMbSg/ 2Pn3IikaBxXtBmYKjjlvkBx52aL/E0V3sysQsP9S1RimGwOsVH7C1ZeW05XnsP+u wVtfrFyj+F6y8yxZT12jcwgTSAvhIBdFXDRe0Yav9t6guEKTOgQThZVMk19d2Px2 rmIohfzPFuiXsxZ6bBL5HMU2Vmzv7q1/chXd6tgx7SB9YRWl80Yne5r7d4WuO+m8 bcvxVI8SlVilKgZhf0c4ClJh05lMkvzOTRXY3rHUmmj6icP07a4PNPWPINXPAB10 VmHA6Rfacf/TKxRwSg+I/9PNF6aPjLvpBLfTNcP9FdK07FqGiEVPNa17c3VaksMG qVfNw+rzB3I7A55ztmOPOMYvOqPaWL/W0nJucXTdah0JVP86I8lrUXYPTYqmvFNF yF9PgNB3wiMj6htvFSQATQwMQca0eyXlXQ1nVkdygUdBNI83oLPXiUzUxJcVm+3R +aIYSDE/UG4EVxH5FLvQ3wgAlQtNRMyF9yRpfCq1kKeYS+luhZQ= =KJzU -----END PGP SIGNATURE----- Merge tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM32 Device Tree updates This performs a cleanup of the MT6582 devicetrees and adds support for secondary cores bringup on this SoC. This also introduces basic support for a new machine, the MT6582 Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for booting into a initramfs with UART console output. * tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623 ARM: dts: mediatek: add basic support for Alcatel yarisxl board dt-bindings: arm: mediatek: Add MT6582 yarisxl ARM: dts: mediatek: mt6582: add enable-method property to cpus ARM: dts: mediatek: mt6582: add clock-names property to uart nodes ARM: dts: mediatek: mt6582: add mt6582 compatible to timer ARM: dts: mediatek: mt6582: remove compatible property from root node ARM: dts: mediatek: mt6582: sort nodes and properties ARM: dts: mediatek: mt6582: move MMIO devices under soc node Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
ab07edaab6 |
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
-----BEGIN PGP SIGNATURE-----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=SOab
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=s4cc
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
* tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: enable display panel support
arm64: dts: exynos7870-a2corelte: enable display panel support
arm64: dts: exynos7870-on7xelte: enable display panel support
arm64: dts: exynos7870: add DSI support
arm64: dts: exynos: gs101: fix sysreg_apm reg property
arm64: dts: exynos: gs101: fix clock module unit reg sizes
arm64: dts: exynos: gs101: add sysreg_misc and sysreg_hsi0 nodes
arm64: dts: exynos: gs101: add OPPs
arm64: dts: exynos: gs101: add CPU clocks
arm64: dts: exynos: gs101: add #clock-cells to the ACPM protocol node
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
arm64: dts: exynos: gs101-pixel-common: add node for s2mpg10 / clock
arm64: dts: exynos990: Add sysreg nodes for PERIC0 and PERIC1
arm64: dts: exynosautov920: add CMU_MFC clock DT nodes
arm64: dts: exynosautov920: add CMU_M2M clock DT nodes
arm64: dts: exynos7870-on7xelte: add bus-width to mmc0 node
arm64: dts: exynos7870-j6lte: add bus-width to mmc0 node
arm64: dts: exynos7870-a2corelte: add bus-width to mmc0 node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
2643187ccb |
platform/x86: ayaneo-ec: Add suspend hook
The Ayaneo EC resets after hibernation, losing the charge control state. Add a small PM hook to restore this state on hibernation resume. The fan speed is also lost during hibernation, but since hibernation failures are common with this class of devices, setting a low fan speed when the userspace program controlling the fan will potentially not take over could cause the device to overheat, so it is not restored. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-7-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
02c15e3ddc |
platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec
Currently, the oxpec driver contains Ayaneo devices. Move them to the new ayaneo-ec driver, which is dedicated to them. As this driver supports charge inhibition for Ayaneo, add support for it for the AIR, AIR 1S, AB05-Medoncino, AIR Pro, and Kun, referenced from the out-of-tree ayaneo-platform driver. In addition, update the readmes of oxpec to reflect this change. Link: https://github.com/ShadowBlip/ayaneo-platform Tested-by: Derek J. Clark <derekjohn.clark@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-6-lkml@antheas.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
e921a8b4de |
platform/x86: ayaneo-ec: Add controller power and modules attributes
The Ayaneo 3 features hot-swappable controller modules. The ejection and management is done through HID. However, after ejecting the modules, the controller needs to be power cycled via the EC to re-initialize. For this, the EC provides a variable that holds whether the left or right modules are connected, and a power control register to turn the controller on or off. After ejecting the modules, the controller should be turned off. Then, after both modules are reinserted, the controller may be powered on again to re-initialize. This patch introduces two new sysfs attributes: - `controller_modules`: a read-only attribute that indicates whether the left and right modules are connected (none, left, right, both). - `controller_power`: a read-write attribute that allows the user to turn the controller on or off (with '1'/'0'). Therefore, after ejection is complete, userspace can power off the controller, then wait until both modules have been reinserted (`controller_modules` will return 'both') to turn on the controller. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-5-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
6d710ec358 |
platform/x86: ayaneo-ec: Add charge control support
Ayaneo devices support charge inhibition via the EC. This inhibition only works while the device is powered on, and resets between restarts. However, it is maintained across suspend/resume cycles. The EC does not support charge threshold control. Instead, userspace software on Windows manually toggles charge inhibition depending on battery level. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-4-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
536522f035 |
platform/x86: ayaneo-ec: Add hwmon support
Add hwmon single fan sensor reads and control for Ayaneo devices. The register and method of access is the same for all devices. Reviewed-by: Armin-Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-3-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
70a4a815d9 |
platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver
Recent Ayaneo devices feature an ACPI mapped Embedded Controller (EC) with standard addresses across models that provides access to fan speed, fan control, battery charge limits, and controller power controls. Introduce a new driver stub that will handle these driver features. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20251119174505.597218-2-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
7e90eede6b |
T-HEAD Devicetrees for v6.19
Add PWM controlled fan and it's associated thermal management for the Lichee Pi 4A board. Enable additional ISA extenstions supported by the T-Head C910 cores: Zfh, Ziccrse, XTheadvector. Add reset controllers of more TH1520 subsystems: AP, AO, DSP, MISC, VI. Signed-off-by: Drew Fustini <fustini@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCaRDChQAKCRDb7CzD2Six DNU3AQDMrJ6jcRJQbog1T2OnIxPyvOct1Hx+01cD62MaSFprHAEAsJ4L8s3HPMWf pj+Cq44DoFH6UV/ImJlxpYFL87J9TQY= =ykgv -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkghukACgkQmmx57+YA GNmV9A/9GUE328GSrWiJ63RsZmgnBhb0o2SRyQxQSmTWbaLnNeHebO0myNCUynK9 kqacDnOFyUyFu8J7bMqT5RtZTGZalvFtt7Uxld+ESjTxujBqCZz7QNEVvWzNUpzB pxIfJdWfm7GcQYZsM+6V+tpByVkrnh3smErm3vCt4TFCk9Eqkn0n+Vfe8Rvm3Tm9 ELZY/zC4LW4GMDX429wJs1d9N9c6zxYwhd/Q1kyO5iPV/eiLlTVVFlHQZZaJRlB0 TbAHVt5RxtN4AC2xLUAer3J1K4iZNnXvVbBb5kBnGny5FTxHSafB11V2BFwDKrDB eleUw8K6xXL5Jijau5rULF4e35Qo8SXRI6FaiezcZbFzqC/ChSzsSY6phGEd2REt Z/lXrpa4YhiFPNyJzRLCDeFp9vRHgMOwBng7eZWx2AOMhGGNOUp1ktgj4n2lsRf1 9AxII/D+Dfdvrl1aicTRxpKEknywJw1x4RPcM9jTQfbEh22inp4f2fdwjNtK85vp uvStggBXvACHSz8pM7g1iifLsrOoXIuN7/BRrnw7yBUTz6rtCLAwsIpqr2H7qPTA ke+4EcxLNZWhii8pMG/q/bsOdDoaylVHfDkA/hai0tUpseGDm7Sf1LutFIi6i7CO aYSIIXFIFSx8JFbgqncmDwXoZwFGc/y4npDcd5NTUR8eNygX9ME= =wIpW -----END PGP SIGNATURE----- Merge tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt T-HEAD Devicetrees for v6.19 Add PWM controlled fan and it's associated thermal management for the Lichee Pi 4A board. Enable additional ISA extenstions supported by the T-Head C910 cores: Zfh, Ziccrse, XTheadvector. Add reset controllers of more TH1520 subsystems: AP, AO, DSP, MISC, VI. Signed-off-by: Drew Fustini <fustini@kernel.org> * tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux: riscv: dts: thead: Add reset controllers of more subsystems for TH1520 riscv: dts: thead: Add PWM fan and thermal control riscv: dts: thead: Add PWM controller node riscv: dts: thead: add zfh for th1520 riscv: dts: thead: add ziccrse for th1520 riscv: dts: thead: add xtheadvector to the th1520 devicetree Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
72eb5b1f5d |
Reset/GPIO/swnode changes for v6.19 (v2)
* Fix chtwc_int33fe build issue since commit |
||
|
|
156c42c7fc |
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaQSHowAKCRCKwlD9ZEnx
cJSMAP0ejaSo8LMqtL1rSMrPWz07J/H3xNQDsEgbWHdybNCp2wD/XQhBQpmtnIJb
dk1rw+nNHXowyGN6VfQ7FV57J1KKaAc=
=wcHD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0Lcz
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (80 commits)
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
arm64: dts: renesas: r8a77961: Add GX6250 GPU node
arm64: dts: renesas: r8a77960: Add GX6250 GPU node
ARM: dts: renesas: kzm9g: Name interrupts for accelerometer
arm64: dts: renesas: r9a09g087: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g077: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g056: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g057: Add Cortex-A55 PMU node
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
arm64: dts: renesas: v3msk: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add SWDT node
arm64: dts: renesas: r8a779g0: Add SWDT node
arm64: dts: renesas: r8a779f0: Add SWDT node
arm64: dts: renesas: r8a779a0: Add SWDT node
arm64: dts: renesas: rzt2h/rzn2h-evk: Enable ADCs
arm64: dts: renesas: r9a09g087: Add ADCs support
arm64: dts: renesas: r9a09g077: Add ADCs support
ARM: dts: renesas: koelsch: Update ADV7180 binding
ARM: dts: renesas: r9a06g032: Move interrupt-parent to root node
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
a9b0869720 |
platform/x86: asus-armoury: add support for FA507UV
Add TDP data for laptop mode FA507UV. Signed-off-by: Denis Benato <denis.benato@linux.dev> Link: https://patch.msgid.link/20251120025413.1686540-1-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
7ab4745858 |
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes: - The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems New platforms: - IBM Balcones The Balcones system is similar to Bonnell but with a POWER11 processor. Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI tree is needed. - Meta Yosemite5 The Yosemite5 platform provides monitoring of voltages, power, temperatures, and other critical parameters across the motherboard, CXL board, E1.S expansion board, and NIC components. Updated platforms: - clemente (Meta): LEDs, shunt resistor configuration - santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs There are a scattering of one-off changes and devicetree cleanups for other platforms as well. -----BEGIN PGP SIGNATURE----- iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCaQPvIxwcYW5kcmV3QGNv ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmWf4A/0xN2+KOIfqkVSut5IP2 Y54gRoSR9xhEeoaOq1xHrvJpAQCqo6V5j1dmx21qTDhFbxGxU4KH6SUBhVpIMNYj vGZhCA== =e3/X -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkghTsACgkQmmx57+YA GNka7Q/7BVAkUmHTXMfxP+VWDYzqhV5G4LjrdaW01heQC3j1mTv4qL5KGQTrrEQU gC2tZ/rpIpOvc1PdTubh/B1sMdRPb/c0+NVpYTbfjrEMSFSLWLxyNOVhFD3fBxMz 8jj1YS4o8Z0KmgHQNuhy6+nPUiez8aPyYBWk6r6ZsgB4kmGyThRAhUB75wwgd8gl DDINQe/mPlOKY3YwIniS7pT53z7fyKfXXOVvTWGYQOB79ykUpNdppK1POVsywueT +2g0juDD/SELCf4TP7eq/JKts4SDMlePlt5pKqIchRdzAucaNnl1220T31Y2aHEd rj1Nyf8Ad0uGsLwizGnvoremtfhCo0yOlVPotB1nbR/spadNU8IcX61RNd6eS98B VWrZBTsUSKcrxgE/+gDDGipSOpR5b0dmH+ignJuhWH8uiDwfT1urYUIB8Nnuueeh udkPraSM+yQr0HfajQrJPeIIQaxP/7VnQr5yNfFIQk3aD5TR92cFFviI8lsJybVt uhKb9vd4mdeE0V1EIrWjSWX757Zcvbo8xWULYdLdex21JJ2adYXu7DHO8vntGckC /EzF+z1wCjHKNOYnNAV7rqD6LT8IKb4lbxS6GWSupI4aicoLZsrQhp0FlS7H+KLg NYz6ClQJstwC58B+lEU6wEE3SU+P3Bp9UU7N9Zzhih9zayrRiN0= =8yf0 -----END PGP SIGNATURE----- Merge tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt First batch of ASPEED Arm devicetree changes for 6.19 Significant changes: - The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems New platforms: - IBM Balcones The Balcones system is similar to Bonnell but with a POWER11 processor. Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI tree is needed. - Meta Yosemite5 The Yosemite5 platform provides monitoring of voltages, power, temperatures, and other critical parameters across the motherboard, CXL board, E1.S expansion board, and NIC components. Updated platforms: - clemente (Meta): LEDs, shunt resistor configuration - santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs There are a scattering of one-off changes and devicetree cleanups for other platforms as well. * tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux: ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module ARM: dts: aspeed: santabarbara: Add AMD APML interface support ARM: dts: aspeed: santabarbara: Add gpio line name ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC ARM: dts: aspeed: santabarbara: Add sensor support for extension boards ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC dt-bindings: arm: aspeed: add Meta Yosemite5 board ARM: dts: aspeed: clemente: Add HDD LED GPIO ARM: dts: aspeed: Fix max31785 fan properties ARM: dts: aspeed: Add Balcones system dt-bindings: arm: aspeed: add IBM Bonnell board dt-bindings: arm: aspeed: add IBM Balcones board ARM: dts: aspeed: harma: Add MCTP I2C controller node ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
6b87f7ea74 |
platform/x86: asus-armoury: fix mini-led mode show
Perform the actual check of the mini-led mode against supported modes and do not return the first one regardless of the WMI devstate. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/aR1xbxEQyQPEvB9o@stanley.mountain/ Signed-off-by: Denis Benato <denis.benato@linux.dev> Link: https://patch.msgid.link/20251120024059.1341326-1-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
6ef9a6fca7 |
PXA1908 DT changes for 6.19
Rollup of hardware support which has accumulated since support for the SoC and coreprimevelte board was merged. This most notably includes eMMC, PMIC, backlight and touchscreen. A few QoL fixes are also included. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRt/0HWDfMUtbdrpjCtMZNSRY+tAwUCaOz5IwAKCRCtMZNSRY+t A/JXAPsGp+81P4vgINVTfceFPqbcqd1gnFk/ZCqBJjvdGvR73AD/R6Se5lwtSIq6 sfcm47LpbZ+Bv/9UbZMA7D0il67tcwY= =NjpT -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkghKoACgkQmmx57+YA GNkBIg//WKaHWlNKGJAMmjnNSkorAoTpEyEETppiLZIXqsxYuS5zfbYXO7bMDKao o2yioNyLtD4ZEcjgw+cx4v0gkbdwmAfNwKLuSBsRsg1MbxgxNjAbgF8QKyMp6/Iu nEFbHi8zf/Ypb9Su5G4pteHVJQNJe1glU0DiV7Oi/x/g1y7va3tjQgys6LnPQ1Z4 V5dshWcbklcODFMDkFkmJ12d6iXV7AYFhkjtaemqq+F1j4M92rBRAlOHIWuhB5Wh BH5dZG0c8AGg0394smwOe9LjqN0jVWu+/GeWr3fs8GS2nSQS1rhZfewkR5YAl7nL K1MzuvzwXQ9r1A113Yu7LyzBkIl2K795L/AKDOHMtfLZHaqG4LVUVwSbCqwZsUvt mThZq6v0bbs4YdMLN+RrTCH/Z9vhe+5I/kG0JXiUcvQbDyBAw50aGBQBG5uAuzrT Gyvs8Fl7cqzpjIWfKHZdc/5HRNlufFHzyykPmoBhfZAfpTShfJ4917KAaTctzNSf GCZzYPMHO1E/Y1d3hyRGUsHGD8JaPzl4Ki75EnKvSexs5rGBYLBeJCDONuV9Dkp0 9scvpWo8Sr7LlzBhYpOkJERxMcRY5L7K5CZKkYABFENvdw3mOKctaVEtdNE4Uhe+ C6ga3GP8vC/iytnFRl7Xnf/1HYgK9xyz80UhzvVNysMW7Fc8NFE= =n+0B -----END PGP SIGNATURE----- Merge tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux into soc/dt PXA1908 DT changes for 6.19 Rollup of hardware support which has accumulated since support for the SoC and coreprimevelte board was merged. This most notably includes eMMC, PMIC, backlight and touchscreen. A few QoL fixes are also included. * tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux: arm64: dts: marvell: pxa1908: Add power domains arm64: dts: marvell: samsung,coreprimevelte: Add USB connector arm64: dts: marvell: samsung,coreprimevelte: Fill in memory node arm64: dts: marvell: samsung,coreprimevelte: Drop some reserved memory arm64: dts: marvell: pxa1908: Move ramoops to SoC dtsi arm64: dts: marvell: samsung,coreprimevelte: Add vibrator arm64: dts: marvell: pxa1908: Add PWMs arm64: dts: marvell: samsung,coreprimevelte: Enable eMMC arm64: dts: marvell: samsung,coreprimevelte: Correct CD GPIO arm64: dts: marvell: samsung,coreprimevelte: Add backlight arm64: dts: samsung,coreprimevelte: add SDIO arm64: dts: samsung,coreprimevelte: add touchscreen arm64: dts: samsung,coreprimevelte: add PMIC Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
0a69fe8f09 |
platform/x86: asus-armoury: Fix error code in mini_led_mode_current_value_store()
There are two return statements in a row here. The first one is wrong
so delete that one. This changes the return value to -ENODEV.
Fixes:
|
||
|
|
2bab99283d |
Tenstorrent device tree for v6.19
Add Tenstorrent as a vendor and enable support for the Blackhole SoC in Blackhole P100 and P150 PCIe cards. The SoC contains four RISC-V CPU tiles consisting of 4x SiFive X280 cores. There is a virtual UART implemented in OpenSBI firmware that allows a console program on the PCIe host to communicate through shared memory with Linux running on the Blackhole card. Link: https://github.com/tenstorrent/tt-bh-linux Link: https://github.com/tenstorrent/opensbi/ Signed-off-by: Drew Fustini <fustini@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCaPPUxQAKCRDb7CzD2Six DPcCAQDtzzCHclFzG1GwQj5zaX7dGVoCjFkzmgiUiA+ju4gD9AEA60g+6DgksxRC juAX9aflgWCkRCdLQVuSf7jBFii0hg0= =pJ7i -----END PGP SIGNATURE----- Merge tag 'tenstorrent-dt-for-v6.19' of https://github.com/tenstorrent/linux into soc/newsoc Tenstorrent device tree for v6.19 Add Tenstorrent as a vendor and enable support for the Blackhole SoC in Blackhole P100 and P150 PCIe cards. The SoC contains four RISC-V CPU tiles consisting of 4x SiFive X280 cores. There is a virtual UART implemented in OpenSBI firmware that allows a console program on the PCIe host to communicate through shared memory with Linux running on the Blackhole card. Link: https://github.com/tenstorrent/tt-bh-linux Link: https://github.com/tenstorrent/opensbi/ Signed-off-by: Drew Fustini <fustini@kernel.org> * tag 'tenstorrent-dt-for-v6.19' of https://github.com/tenstorrent/linux: riscv: defconfig: Enable Tenstorrent SoCs riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible dt-bindings: timers: Add Tenstorrent Blackhole compatible dt-bindings: riscv: cpus: Add SiFive X280 compatible dt-bindings: riscv: Add Tenstorrent Blackhole compatible dt-bindings: vendor-prefixes: Add Tenstorrent AI ULC |
||
|
|
7ec374c6b8 |
platform/x86/amd/pmf: Replace magic table id with METRICS_TABLE_ID
Add METRICS_TABLE_ID (7) and use it when requesting the metrics transfer table instead of the hard-coded literal. This clarifies the meaning of the argument to amd_pmf_send_cmd() and centralizes the table ID definition for easier maintenance. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20251120105210.3945710-4-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
83f0442a40 |
platform/x86/amd/pmf: Use explicit SET_CMD/GET_CMD flags in amd_pmf_send_cmd()
Add SET_CMD and GET_CMD constants and replace boolean values passed as the get/set argument to amd_pmf_send_cmd() with the new explicit flags. This improves readability, avoids ambiguity around true/false and 0/1 usage. There is no functional change. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20251120105210.3945710-3-Shyam-sundar.S-k@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
bc3c0a3231 |
platform/x86/amd/pmf: Rename IPU metrics fields to NPU for consistency
Update smu_pmf_metrics_v2 to use NPU terminology instead of IPU. This aligns the driver with current firmware/hardware naming and fixes the mismatch. There is no functional change and no impact to the struct layout and only field names are updated. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Link: https://patch.msgid.link/20251120105210.3945710-2-Shyam-sundar.S-k@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
d6732ef4ab |
drm/bridge: sii902x: Fix HDMI detection with DRM_BRIDGE_ATTACH_NO_CONNECTOR
The sii902x driver was caching HDMI detection state in a sink_is_hdmi field
and checking it in mode_set() to determine whether to set HDMI or DVI
output mode. This approach had two problems:
1. With DRM_BRIDGE_ATTACH_NO_CONNECTOR (used by modern display drivers like
TIDSS), the bridge's get_modes() is never called. Instead, the
drm_bridge_connector helper calls the bridge's edid_read() and updates the
connector itself. This meant sink_is_hdmi was never populated, causing the
driver to default to DVI mode and breaking HDMI audio.
2. The mode_set() callback doesn't receive atomic state or connector
pointer, making it impossible to check connector->display_info.is_hdmi
directly at that point.
Fix this by moving the HDMI vs DVI decision from mode_set() to
atomic_enable(), where we can access the connector via
drm_atomic_get_new_connector_for_encoder(). This works for both connector
models:
- With DRM_BRIDGE_ATTACH_NO_CONNECTOR: Returns the drm_bridge_connector
created by the display driver, which has already been updated by the
helper's call to drm_edid_connector_update()
- Without DRM_BRIDGE_ATTACH_NO_CONNECTOR (legacy): Returns the connector
embedded in sii902x struct, which gets updated by the bridge's own
get_modes()
Fixes:
|
||
|
|
715cbb21c6 |
drm/bridge: it66121: Add minimal it66122 support
The IT66122 is a pin compatible replacement for the IT66122. Based on empirical testing, the new device looks to be compatible with IT66121. However due to a lack of public data sheet at this time beyond overall feature list[1] (which seems to add additional features vs ITT66121), it is hard to determine that additional register operations required to enable additional features. So, introduce the device as a new compatible that we will detect based on vid/pid match, with explicit id that can be used to extend the driver capability as information becomes available later on. [1] https://www.ite.com.tw/en/product/cate1/IT66122 Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251029150636.3118628-6-nm@ti.com |
||
|
|
a8811c0bb7 |
drm/bridge: it66121: Use vid/pid to detect the type of chip
The driver knows exactly which version of the chip is present since the vid/pid is used to enforce a compatibility. Given that some devices like IT66121 has potentially been replaced with IT66122 mid production for many platforms, it makes no sense to use the vid/pid as an enforcement for compatibility. Instead, detect the ID of the actual chip in use by matching the corresponding vid/pid and drop the compatible specific lookup table. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251029150636.3118628-5-nm@ti.com |
||
|
|
a1df28b5f4 |
drm/bridge: it66121: Sort the compatibles
Keep the compatibles sorted alpha-numerically. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251029150636.3118628-4-nm@ti.com |
||
|
|
1ba36afa66 |
drm/bridge: it66121: Drop ftrace like dev_dbg() prints
Drop the ftrace like dev_dbg() that checkpatch --strict complains about: WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "%s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "%s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "%s\n", __func__); Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251029150636.3118628-3-nm@ti.com |
||
|
|
e902d2c38a |
dt-bindings: display: bridge: it66121: Add compatible string for IT66122
Add a new ite,it66122 compatible string to the IT66121 binding documentation, since the two chips are practically same except for id register difference. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Davis <afd@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251029150636.3118628-2-nm@ti.com |
||
|
|
670500b41e |
regulator: pca9450: Fix error code in probe()
Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret". The "ret"
variable is success at this point.
Fixes:
|
||
|
|
527250cd90 |
platform/x86: intel: chtwc_int33fe: don't dereference swnode args
Members of struct software_node_ref_args should not be dereferenced directly but set using the provided macros. Commit |
||
|
|
be5ee60ac5 |
objtool: Provide access to feature and flags of group alternatives
Each alternative of a group alternative depends on a specific feature and flags. Provide access to the feature/flags for each alternative as an attribute (feature) in struct alt_group. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-26-alexandre.chartre@oracle.com |
||
|
|
4aae0d3f77 |
objtool: Fix address references in alternatives
When using the --disas option, alternatives are disassembled but address references in non-default alternatives can be incorrect. The problem is that alternatives are shown as if they were replacing the original code of the alternative. So if an alternative is referencing an address inside the alternative then the reference has to be adjusted to the location of the original code. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-25-alexandre.chartre@oracle.com |
||
|
|
7e017720aa |
objtool: Disassemble jump table alternatives
When using the --disas option, also disassemble jump tables. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-24-alexandre.chartre@oracle.com |
||
|
|
78df4590c5 |
objtool: Disassemble exception table alternatives
When using the --disas option, also disassemble exception tables (EX_TABLE). Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-23-alexandre.chartre@oracle.com |
||
|
|
15e7ad8667 |
objtool: Print addresses with alternative instructions
All alternatives are disassemble side-by-side when using the --disas option. However the address of each instruction is not printed because instructions from different alternatives are not necessarily aligned. Change this behavior to print the address of each instruction. Spaces will appear between instructions from the same alternative when instructions from different alternatives do not have the same alignment. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-22-alexandre.chartre@oracle.com |
||
|
|
a4f1599672 |
objtool: Disassemble group alternatives
When using the --disas option, disassemble all group alternatives. Jump tables and exception tables (which are handled as alternatives) are not disassembled at the moment. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-21-alexandre.chartre@oracle.com |
||
|
|
87343e6642 |
objtool: Print headers for alternatives
When using the --disas option, objtool doesn't currently disassemble any alternative. Print an header for each alternative. This identifies places where alternatives are present but alternative code is still not disassembled at the moment. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-20-alexandre.chartre@oracle.com |
||
|
|
7ad7a4a720 |
objtool: Preserve alternatives order
Preserve the order in which alternatives are defined. Currently objtool stores alternatives in a list in reverse order. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-19-alexandre.chartre@oracle.com |
||
|
|
5f326c8897 |
objtool: Add the --disas=<function-pattern> action
Add the --disas=<function-pattern> actions to disassemble the specified functions. The function pattern can be a single function name (e.g. --disas foo to disassemble the function with the name "foo"), or a shell wildcard pattern (e.g. --disas foo* to disassemble all functions with a name starting with "foo"). Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-18-alexandre.chartre@oracle.com |
||
|
|
c3b7d044fc |
objtool: Do not validate IBT for .return_sites and .call_sites
The .return_sites and .call_sites sections reference text addresses, but not with the intent to indirect branch to them, so they don't need to be validated for IBT. This is useful when running objtool on object files which already have .return_sites or .call_sites sections, for example to re-run objtool after it has reported an error or a warning. Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://patch.msgid.link/20251121095340.464045-17-alexandre.chartre@oracle.com |