Add Host1x context stream IDs on systems that support Host1x context
isolation. Host1x and attached engines can use these stream IDs to
allow isolation between memory used by different processes.
The specified stream IDs must match those configured by the hypervisor,
if one is present.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add and
enable the device tree node on Tegra234.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add and
enable the device tree node on Tegra194.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the native timers on Tegra186 chips to allow using the watchdog
functionality to recover from system hangs.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra234 uses the Control Backbone (CBB) version 2.0. Add the nodes
that enable error handling from the various CBB 2.0 fabrics found on
Tegra234.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes to enable error handling on the Control Backbone
(CBB). Tegra194 uses CBB version 1.0.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra SYSRAM contains regions access to which is restricted to
certain hardware blocks on the system, and speculative accesses to
those will cause issues.
Patch 'misc: sram: Only map reserved areas in Tegra SYSRAM' attempted
to resolve this by only mapping the regions specified in the device
tree on the assumption that there are no such restricted areas within
the 64K-aligned area of memory that contains the memory we wish to map.
Turns out this assumption is wrong, as there are such areas above the
4K pages described in the device trees. As such, we need to use the
bigger hammer that is no-memory-wc, which causes the memory to be
mapped as Device memory to which speculative accesses are disallowed.
As such, the previous patch in the series,
'firmware: tegra: bpmp: do only aligned access to IPC memory area',
is required with this patch to make the BPMP driver only issue aligned
memory accesses as those are also required with Device memory.
Fixes: fec29bf049 ("misc: sram: Only map reserved areas in Tegra SYSRAM")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes for Tegra234 GPCDMA
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable OPE module usage on various Jetson platforms. This can be plugged
into an audio path using ALSA mixer controls. Add audio-graph-port binding
to use OPE device with generic audio-graph based sound card.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Output Processing Engine (OPE) is a client of AHUB and is present on
Tegra210 and later generations of Tegra SoC. Add this device on the
relevant SoC DTSI files.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If an error occurs, debugfs_create_file() will return ERR_PTR(-ERROR),
so use IS_ERR() to check it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Clang static analysis reports this representative issue
atomisp-ov2722.c:920:3: warning: 3rd function call
argument is an uninitialized value
dev_err(&client->dev, "sensor_id_high = 0x%x\n", high);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
high and low are only set when ov2722_read_reg() is successful.
Reporting the high value when there is an error is not
meaningful. The later read for low is not checked. high
and low are or-ed together and checked against a non zero
value.
Remove the unneeded error reporting for high. Initialize
high and low to 0 and use the id check to determine if
the reads were successful
The later read for revision is not checked. If it
fails the old high value will be used and the revision
will be misreported.
Since the revision is only reported and not checked or
stored it is not necessary to return if the read with
successful. This makes the ret variable unnecessary
so remove it.
Link: https://lore.kernel.org/linux-media/20220326191853.2914552-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless bitmap_zero() call. The bitmap is already
zero'ed when allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a files documenting what I've learned about the driver while
working on various cleanups.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-41-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The force argument to the __destroy_pipe[s]() and __destroy_stream[s]()
functions is always true. Remove the argument and remove the code necessary
to handle the false case.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-40-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use atomisp_destroy_pipes_stream_force() in 4 more places,
instead of open coding it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-39-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use atomisp_css_update_stream() in 2 more places,
instead of open coding it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-38-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use atomisp_create_pipes_stream() in 2 more places,
instead of open coding it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-37-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
__destroy_streams() and __destroy_pipes() may return an error.
Log a warning when either of them fails.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-36-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The functions called by atomisp_create_pipes_stream() can fail,
add error checking for them.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-35-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
On ia_css_pipe_get_info() errors, destroy both the streams as well
as the pipes which were created.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-34-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
hmm_page_object only stores a struct page pointer, so we can just use
the hmm_bo.pages page pointer array everywhere.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-33-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
host1x_cdma_push_wide() had the assumptions that the last parameter word
was a NOP opcode, and that NOP opcodes could be used in all situations.
Neither are true with the new job opcode sequence, so adjust the
function to not have these assumptions, and instead place an early
RESTART opcode when necessary to jump back to the beginning of the
pushbuffer.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During the refactoring of channel_submit(), assignment of syncval was
moved but it is also used in channel_submit(). Add this assignment back
to channel_submit() as well.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
HMM_BO_SHARE is not supported by the hmm_bo code at all, drop it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-32-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make hmm_alloc() only take size as a parameter and remove other parameters.
since all callers always pass the same flags.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-30-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The global sseu config is applicable only to gen11 platforms where
concurrent media, render and OA use cases may cause some subslices to be
turned off and hence lose NOA configuration. Ideally we want to return
ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so
disable only for gfx12.50+.
v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel)
v3: (Matt)
- Update commit message and replace "12.5" with "12.50"
- Replace DRM_DEBUG() with driver specific drm_dbg()
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-2-umesh.nerlige.ramappa@intel.com
DRM_DEBUG is not the right debug call to use in i915 OA, replace it with
driver specific drm_dbg() call (Matt).
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-1-umesh.nerlige.ramappa@intel.com
Most hmm_alloc() callers want BO_PRIVATE type memory.
Add a hmm_create_from_userdata() helper for other cases so that
the hmm_alloc() calls for all the callers who don't want this
can be simplied.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-29-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
hmm_isp_vaddr_to_host_vaddr() and hmm_host_vaddr_to_hrt_vaddr()
are unused, remove them.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-28-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop the ATOMISP_MAP_FLAG_CACHED flag, it is never set anywhere;
also drop the matching "cached" parameter to hmm[_bo]_alloc which
value was derived form the never set flag.
Drop the ATOMISP_MAP_FLAG_NOFLUSH, it is not used anywhere.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-27-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This flag is only used by one hmm_alloc() caller, drop it and make
the caller call hmm_set(ptr, 0, size) itself to do the clearing.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-26-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop the ATOMISP_ACC_FW_LOAD_* defines, these are no longer used anywhere.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-25-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the removal of the ACC ioctls and atomisp_acc.c asc.acc.pipeline
never gets set, so it is always NULL.
Remove asc.acc.pipeline and drop checks for it being NULL / !NULL.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-22-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the removal of the ACC ioctls and atomisp_acc.c a whole bunch
of atomisp_*css_* functions is no longer used, remove them.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-21-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the ACC ioctls removed sd->acc.fw is always empty turning
the atomisp_acc.c code into no-ops, remove it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-20-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
These ioctls allow userspace to load custom programs into the ISP, which:
a) Seems dangerous
b) Cannot be used by opensource userspace since there is no FOSS code to
create such programs
b) These seem to be unused even by the Android closed source camera code
(they don't show up in a strace of the camera app)
So removing these seems be a good idea. Another reason to remove these is
that atomisp_acc_map() is the only user of the userptr functionality in
hmm_alloc(), so it gets in the way of further cleanups / simplification
of the hmm code.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-19-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The comment documenting hmm_bo_allocated() was copied (and not modified)
from the comment documenting hmm_bo_alloc(), so there are 2 copies
of the hmm_bo_alloc() documentation.
Remove the copy of the comment above the hmm_bo_allocated() prototype.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-18-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since the hmm-pool code has been removed this now always gets set
to HMM_PAGE_TYPE_GENERAL, so just remove it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-16-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ia_css_frame_map() has only one caller which passes a hardcoded 0
for the attribute argument, drop it.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-15-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since we have removed the hmm pools these are completely meaningless now.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-14-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Without pool support the (optional) debug logging done by these is
not really meaningful, drop it all.
Link: https://lore.kernel.org/linux-media/20220615205037.16549-13-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
