Testcase to ensure that using invalid event in generic event for
PERF_TYPE_HARDWARE will fail. Invalid generic events in power10 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- PERF_COUNT_HW_REF_CPU_CYCLES
Invalid generic events in power9 are:
- PERF_COUNT_HW_BUS_CYCLES
- PERF_COUNT_HW_REF_CPU_CYCLES
Testcase does event open for valid and invalid generic events to ensure
event open works for all valid events and fails for invalid events.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-29-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power10. Example,
Using PMC1 to PMC4 in a group and again trying to schedule
PM_CYC_ALT (0x0001e) will fail since this exceeds number of programmable
events in group. But since 0x600f4 is an alternative event for 0x0001e,
it is possible to use 0x0001e in the group. Testcase uses such
combination all events in power10 which has alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-28-atrajeev@linux.vnet.ibm.com
Platform specific PMU supports alternative event for some of the event
codes. During perf_event_open, it any event group doesn't match
constraint check criteria, further lookup is done to find alternative
event. Code checks to see if it is possible to schedule event as group
using alternative events.
Testcase exercises the alternative event find code for power9. Example,
since events in same PMC can't go in as a group, ideally using
PM_RUN_CYC_ALT (0x200f4) and PM_BR_TAKEN_CMPL (0x200fa) will fail. But
since RUN_CYC (0x600f4) is alternative event for 0x200f4, it is possible
to use 0x600f4 and 0x200fa as group. Testcase uses such combination for
all events in power9 which has an alternative event.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-27-atrajeev@linux.vnet.ibm.com
Some of the events are blacklisted in power9. The list of blacklisted
events are noted in power9-events-list.h When trying to do event open
for any of these blacklisted event will cause a failure. Testcase
ensures that using blacklisted events will cause event_open to fail in
power9. This test is only applicable on power9 DD2.1 and DD2.2 and hence
test adds checks to skip on other platforms.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-26-atrajeev@linux.vnet.ibm.com
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
thresh_ctl bits. For MMCRA[48:51]/[52:55]) Threshold Start/Stop,
0b11110000/0b00001111 is reserved.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-25-atrajeev@linux.vnet.ibm.com
Some of the bits in the event code is reserved for specific platforms.
Event code bits 52-59 are reserved in power9, whereas in power10, these
are used for programming Monitor Mode Control Register 3 (MMCR3). Bit 9
in event code is reserved in power9, whereas it is used for programming
"radix_scope_qual" bit 18 in Monitor Mode Control Register 1 (MMCR1).
Testcase to ensure that using reserved bits in event code should cause
event_open to fail.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-24-atrajeev@linux.vnet.ibm.com
Events with different "sample" field values which is used to program
Monitor Mode Control Register A (MMCRA) in a group will fail to
schedule. Testcase uses event with load only sampling mode as group
leader and event with store only sampling as sibling event. So that it
can check that using different sample bits in event code will fail in
event open for group of events
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-23-atrajeev@linux.vnet.ibm.com
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA)
Random Sampling Mode (SM) value. As per Instruction Set
Architecture (ISA), the values 0x5, 0x9, 0xD, 0x19, 0x1D, 0x1A, 0x1E are
reserved for sampling mode field. Test that having these reserved bit
values should cause event_open to fail. Input event code in testcases
uses these sampling bits along with 401e0 (PM_MRK_INST_CMPL).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-22-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check for radix_scope_qual field which is
used to program Monitor Mode Control Register (MMCR1) bit 18. All events
in the group should match radix_scope_qual bit, otherwise event_open for
the group should fail. Testcase uses "0x14242" (PM_DATA_RADIX_PROCESS_L2_PTE_FROM_L2)
with radix_scope_qual bit set for power10.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-21-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check when using events with same PMC.
Multiple events in a group asking for same PMC should fail. Testcase
uses "0x22C040" on PMC2 as leader and also subling which is expected to
fail. Using PMC1 for sibling event should pass the test.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-20-atrajeev@linux.vnet.ibm.com
Testcase for group constraint check for number of counters in use. The
number of programmable counters is from PMC1 to PMC4. Testcase uses four
events with PMC1 to PMC4 and 5th event without any PMC which is expected
to fail since it is exceeding the number of counters in use.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-19-atrajeev@linux.vnet.ibm.com
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) should be excluded from constraint check when
scheduled along with group of events. Example, combination of PMC5,
PMC6, and an event with cache bit will succeed to schedule though first
two events doesn't have cache bit set. Testcase use three events, ie,
600f4(cycles), 500fa(instructions), 22C040 with cache bit (dc_ic) set to
test this constraint check.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-18-atrajeev@linux.vnet.ibm.com
Events using Performance Monitor Counter 5 (PMC5) and Performance
Monitor Counter 6 (PMC6) can't have other fields in event code like
cache bits, thresholding or marked bit. PMC5 and PMC6 only supports base
events: ie 500fa and 600f4. Other combinations should fail. Testcase
tries setting other bits in event code for 500fa and 600f4 to check this
scenario.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-17-atrajeev@linux.vnet.ibm.com
Add new folder for enabling perf event code tests which includes
checking for group constraints, valid/invalid events, also checks for
event excludes, alternatives so on. A new folder "event_code_tests", is
created under "selftests/powerpc/pmu".
Also updates the corresponding Makefiles in "selftests/powerpc" and
"event_code_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-16-atrajeev@linux.vnet.ibm.com
The testcase uses "instructions" event to generate the samples and fetch
Monitor Mode Control Register A (MMCRA) when overflow. Branch History
Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be
verified by perf interface. Incase sample is not of branch type, bhrb
disable bit is explicitly set to 1. Testcase checks if the bhrb disable
bit is set of MMCRA register via perf interface for ISA v3.1 platform
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-15-atrajeev@linux.vnet.ibm.com
The testcase uses event code "0x21c040" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The fields
include PMCxSEL, PMCXCOMB PMCxUNIT, cache. Checks if these fields are
translated correctly via perf interface to MMCR1
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-14-atrajeev@linux.vnet.ibm.com
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type,
ie branch filters are supported. All the branch filters are not
supported in powerpc. Example, power10 platform supports any, ind_call
and cond branch filters. Whereas, it is different in power9. Testcase
checks event open for invalid and valid branch sample types. The branch
types for testcase are picked from "perf_branch_sample_type" in
perf_event.h
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-13-atrajeev@linux.vnet.ibm.com
With sampling, --intr-regs option is used for capturing
interrupt regs. When --intr-regs option is used, PMU code
uses is_sier_available() function which uses PMU flags in
the code. In environment where platform specific PMU is
not registered, PMU flags is not defined. A fix was added
in kernel to address crash while accessing is_sier_available()
function when pmu is not set. commit f75e7d73bd ("powerpc/perf:
Fix crash with is_sier_available when pmu is not set").
Add perf sampling test to exercise this code and make sure
enabling intr_regs shouldn't crash in any platform. Testcase
uses software event cycles since software event will work even
in cases without PMU.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-12-atrajeev@linux.vnet.ibm.com
While enabling branch stack for an event, BHRB (Branch History
Rolling Buffer) filter is set using bhrb_filter_map() callback.
This callback is not defined for cases like generic_compat_pmu
or in case where there is no PMU registered. A fix was added
in kernel to address a crash issue observed while enabling branch
stack for environments which doesn't have this callback.
commit b460b51241 ("powerpc/perf: Fix crashes with
generic_compat_pmu & BHRB").
Add perf sampling test to exercise this code path and make
sure enabling branch stack shouldn't crash in any platform.
Testcase uses software event cycles since software event is
available and can be used even in cases without PMU.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-11-atrajeev@linux.vnet.ibm.com
The platform check for selftest support "check_pvr_for_sampling_tests"
is specific to sampling tests which includes PVR check, presence of
PMU and extended regs support. Extended regs support is needed for
sampling tests which tests whether PMU registers are programmed
correctly. There could be other sampling tests which may not need
extended regs, example, bhrb filter tests which only needs validity
check via event open.
Hence refactor the platform check to have a common function
"platform_check_for_tests" that checks only for PVR check
and presence of PMU. The existing function
"check_pvr_for_sampling_tests" will invoke the common function
and also will include checks for extended regs specific for
sampling. The common function can also be used by tests other
than sampling like event code tests.
Add macro to find array size ("ARRAY_SIZE") to sampling
tests "misc.h" file. This can be used in next tests to
find event array size. Also update "include/reg.h" to
add macros to find minor and major version from PVR which
will be used in testcases.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-10-atrajeev@linux.vnet.ibm.com
there is an unexpected word 'for' in the comments that need to be dropped
file - ./drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
line - 3
* Test cases for for the DRM DP MST helpers
changed to:
* Test cases for the DRM DP MST helpers
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623100632.27056-1-jiangjian@cdjrlc.com
Unlike other copying operations on ITER_PIPE, copy_mc_to_iter() can
result in a short copy. In that case we need to trim the unused
buffers, as well as the length of partially filled one - it's not
enough to set ->head, ->iov_offset and ->count to reflect how
much had we copied. Not hard to fix, fortunately...
I'd put a helper (pipe_discard_from(pipe, head)) into pipe_fs_i.h,
rather than iov_iter.c - it has nothing to do with iov_iter and
having it will allow us to avoid an ugly kludge in fs/splice.c.
We could put it into lib/iov_iter.c for now and move it later,
but I don't see the point going that way...
Cc: stable@kernel.org # 4.19+
Fixes: ca146f6f09 "lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()"
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
we can do copyin/copyout under kmap_local_page(); it shouldn't overflow
the kmap stack - the maximal footprint increase only by one here.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This results in dts duplication, but per mutual agreement card detect
pin configuration belongs to the board files. Move it from the SoC
dtsi to the board DT files.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-10-dmitry.baryshkov@linaro.org
ICC path for the GPU incorrectly states <&gnoc 1 &bimc 5>, which is
a path from SLAVE_GNOC_BIMC to SLAVE_EBI. According to the downstream
kernel sources, the GPU uses MASTER_OXILI here, which is equivalent to
<&bimc 1 ...>.
While we are at it, use defined names instead of the numbers for this
interconnect path.
Fixes: 5cf69dcbec ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-8-dmitry.baryshkov@linaro.org
Add DT entries for the second DWC3 USB host, which is limited to the
USB2.0 (HighSpeed), and the corresponding QUSB PHY.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-7-dmitry.baryshkov@linaro.org
In preparation to adding second USB host/PHY pair, change first USB
PHY's label to qusb2phy0.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-6-dmitry.baryshkov@linaro.org
According to the downstram DT file, the qusb2phy ref clock should be
GCC_RX0_USB2_CLKREF_CLK, not GCC_RX1_USB2_CLKREF_CLK.
Fixes: c65a4ed2ea ("arm64: dts: qcom: sdm630: Add USB configuration")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-5-dmitry.baryshkov@linaro.org
The SoC's device tree file disables gpucc and adreno's SMMU by default.
So let's disable the GPU too. Moreover it looks like SMMU might be not
usable without additional patches (which means that GPU is unusable
too). No board uses GPU at this moment.
Fixes: 5cf69dcbec ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-4-dmitry.baryshkov@linaro.org
Follow the typical practice and keep DSI1/DSI1 PHY disabled by default.
They should be enabled in the board DT files. No existing boards use
them at this moment.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-3-dmitry.baryshkov@linaro.org
Follow the typical practice and keep DSI0/DSI0 PHY disabled by default.
They should be enabled in the board DT files. No existing boards use
them at this moment.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-2-dmitry.baryshkov@linaro.org
When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1
to pages' DMA addresses that go in ascending order and at 4K stride.
The problem is that the bit does not get cleared before doing unmap.
As a result, a lot of warnings from iommu_dma_unmap_page() are seen
in dmesg, which indicates that lookups by iommu_iova_to_phys() fail.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.
Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mails to Charles get an auto reply, that he is no longer working at
Eff'Innov technologies. Remove the entry.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220628070959.187734-1-michael@walle.cc
If the allocation/reservation of reserved-memory fails, it is normally
an error, so print it as an error so that it doesn't get hidden from the
console due to the loglevel. Also make the allocation failure include
the size just like the reservation failure.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220628113540.2790835-1-vincent.whitchurch@axis.com
Andrii Nakryiko says:
====================
This patch set removes all the deprecated APIs in preparation for 1.0 release.
It also makes libbpf_set_strict_mode() a no-op (but keeps it to let per-1.0
applications buildable and dynamically linkable against libbpf 1.0 if they
were already libbpf-1.0 ready) and starts enforcing all the
behaviors that were previously opt-in through libbpf_set_strict_mode().
xsk.{c,h} parts that are now properly provided by libxdp ([0]) are still used
by xdpxceiver.c in selftest/bpf, so I've moved xsk.{c,h} with barely any
changes to under selftests/bpf.
Other than that, apart from removing all the LIBBPF_DEPRECATED-marked APIs,
there is a bunch of internal clean ups allowed by that. I've also "restored"
libbpf.map inheritance chain while removing all the deprecated APIs. I think
that's the right way to do this, as applications using libbpf as shared
library but not relying on any deprecated APIs (i.e., "good citizens" that
prepared for libbpf 1.0 release ahead of time to minimize disruption) should
be able to link both against 0.x and 1.x versions. Either way, it doesn't seem
to break anything and preserve a history on when each "surviving" API was
added.
[0] https://github.com/xdp-project/xdp-tools/tree/master/lib/libxdp
v1->v2:
- rebase on latest bpf-next now that Jiri's perf patches landed;
- fix xsk.o dependency in Makefile to ensure libbpf headers are installed
reliably.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Seems like we missed to add 2 APIs to libbpf.map and another API was
misspelled. Fix it in libbpf.map.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-16-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove support for legacy features and behaviors that previously had to
be disabled by calling libbpf_set_strict_mode():
- legacy BPF map definitions are not supported now;
- RLIMIT_MEMLOCK auto-setting, if necessary, is always on (but see
libbpf_set_memlock_rlim());
- program name is used for program pinning (instead of section name);
- cleaned up error returning logic;
- entry BPF programs should have SEC() always.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf 1.0 stops support legacy-style BPF map definitions. Selftests has
been migrated away from using legacy BPF map definitions except for two
selftests, to make sure that legacy functionality still worked in
pre-1.0 libbpf. Now it's time to let those tests go as libbpf 1.0 is
imminent.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-14-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clean up internals that had to deal with the possibility of
multi-instance bpf_programs. Libbpf 1.0 doesn't support this, so all
this is not necessary now and can be simplified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Keep the LIBBPF_DEPRECATED_SINCE macro "framework" for future
deprecations, but clean up 0.x related helper macros.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
